Resume - I am familiar with almost all of Pennsylvania. I currently have over 30,000 acre...

Misco Jobs

Resume #79700

CONTACT INFORMATION:
View contact information...

Born in Clearfield PA, June 16, 1956
Attended Clearfield Area Schools
Clearfield County Vo-Tech Welding
Graduated 1974

Attended Butler County Community College 1974-75
Forestry Studies

Worked various construction jobs from 1975 until 1995.
Pipefitting, welding, equipment operator, mechanic.

During this time I freelanced, finding coal, gas, oil, and timber properties for various companies.

1995 I accepted a position with Tanoma Coal Sales as a Land and Acquisitions Represenative. I acquired leases and land for Tanoma in six counties in western PA. I developed the Northern Division for Tanoma. Acquiring Coal and Coal lands. I orchestrated and negotiated the buy-out of Fairview Coal, Moravian Run Reclaimation, as well as acquiring leases from Bradford Coal for Tanoma and buying the Clearfield Tipple from Sky Haven Coal. I developed a network of suppliers and producers for Tanoma Coal in the Clearfield/ Dubois areas. When Tanoma was merged with the Pittston Group, forming Alpha Natural Resources, LLC, and AMFIRE Mining Co. I found I just became a number. I was hard to do my job with a company of that size. The reaction time to deals was too slow to make them happen. I left there in November of 2005.
That same November I began working with Exotic Oil, as a Leasing Representative. But my job did not stop there. I leased oil and gas properties for Exotic, along with doing the preliminary research, working with the crews doing the site work. Hooking the wells up to transmission, the piping of the oil to storage tanks, maintenance of the pump jacks, and gas wells.
In August of 2006, I began working as an independent land man for various companies, leasing and buying oil and gas lands and rights.
ACE Land
Chief Gas and Oil
M&K Resources
The Keaton Group
Wind City Gas and Oil
Pennsylvania General Energy

I am looking for a fulltime position. There is very little I cannot do in the gas patch. Lease, Research, pipeline construction, installation of production units, pump jacks, along with the maintenance. I can operated most equipment. I am not married and working odd hours or any hours is not an issue.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 10917)

Go to Search Parameters...

Brief Description

Backround in Electrical Engineering/Design with emphasis of Project Management, Production/Manufacturing with more than 15 years experience in Electrical Design/Construction work and familiar with Standards Procedures as well as with the Industry standards such as ANSI, API, NEC, etc

Application for the Post of " Oil Rig Doctor " (Medical Officer/ Doctor/ Occupational Health Consultant / QHSE Rep./ Medical Advisor). (With On & Off Rotation Duty Cycle). (Offshore &/or Onshore).

Over 20 years experience in LNG and Oil Refinery /Panel/Plant-Operator/Supervisor

Thorough knowledge in Primavera, MS Project, MS Office & EVMS

25 years experience in LNG/Refinery plant/panel operations/commissioning

I have done PG in Chemistry with post Graduate in industrial safety from India and also completed NEBOSH - General Certificate from UK

Senior Rotating Engineer

A Process Engineer with a Masters Degree in Chemical Engineering from the University of Waterloo, ON, Canada and 10+ years experience in natural gas and polymer processing industries. Specialize in process optimization, manufacturing and troubleshooting.

I have over 16 years of working experience as a QC Inspector in petroleum and petrochemical construction Industry. I have knowledge and experience as Q/C inspector in various inspection activity like raw material inspection, welding procedure / welder performance qualification,various methods of NDT

HSE Coordinator / Offshore Safety Officer

I've developed leadership qualities and a proactive attitude, all of these combined with my experience in Maintenance and Well Production Operations, supported with software and techniques on Equipment condition analysis, laser alignment, corrosion testing, boroscopic inspection and vibration analys

Mechanical engineer in Oil&Gas Feild 18 yrs Experience in Installation, maintenance, QC in Static, Rotating equipments.

Able to learn Work Process and new software with ease. Experienced in the refinery of Blueprints, Isometrics, and P&ID¡¦s, Hand Skecthes. Experienced in structural steel supports and familiar in estimating material take-offs. Trouble shooting installation of pipe and assist Engineers in the field.

PhD Petroleum Engineer (Production Technologist)

I have 15 years Lab experience such as 6 years of LNG plants, 7 years of Refineries and 3 years of Aromatic and PTA plant Labs experience with 5 new labs commissioned experience. I have a good knowledge regarding the dosing of corrosion inhibitor at wells side. I can conduct Oil & Gas analysis.

I have a strong ability to communicate and work effectively with co-workers and management. I am Self motivated, detail and goal oriented person. I am experienced in working with little to no supervision. I posses effective skills in communicating orally and in writing

Talent Management, Talent Acquisition, Talent Development, Change Management and Lean

M tech stctural engineer in Civil department, i am having expeerience in oil and gas as sr engineer in civil and structural department.

I am familiar with almost all of Pennsylvania. I currently have over 30,000 acres available to me for lease, most of it has been identified as being in the marcellas shale regions. this acreage also holds shallow oil and gas reserves. A substantial amount has current production which is available

Senior Piping Designer

Heavy equipment operator

Mechanical Fitter (Foreman) Maintenance Department. - 25 years experience

39 years experience running both surface & mineral titles & preparing reports

Assistant Driller - Main activities and responsibilities on the rig DRILLMEC HH - 220

I have been responsible for all aspects of mineral and royalty acquisitions that there are. I am also an experienced permit agent and familiar with most aspects of two and three-d seismic permitting. Negotiated damage settlements.

I am a motivated individual with a high degree of HSE knowledge and operations integrity & commitment, I have operations & maintenance experience working in the oil, gas & chemical industry (without an OSHA recordable incident)

Versed in plant operations and turnaround codination. Seeking short term contract assignment.

Project Engineer & System engineer along with detail design experience and product development expertise gained from 20+ years working for NASA.

I am a Mechanical Engineer with work experience basically in Oil & Gas and Refining Project Management, Gas Compression Plant Maintenance, and Process Safety Management. Currently I live in Venezuela and planning to relocate to the United States. I have dual citizenship and fluent in both languages.

25 years of professional experience in the Front-end and Detailed Design and Engineering, Projects Engineering, PMC, Factory & Site Acceptance Testing, Supervision of Installation, Testing and Commissioning of state-of-art DCS, SCADA, Safety Shutdown and F&G Systems and field instrumentation

TQM facilitator & instructor /Lead teams to resolve to improve process/ 4 yrs offshore Maintenance Supervisor /2yrs manager offshores field/ 4yrs CMSM coordinator/6 yrs contol management stocks

Field Acquisition QC. Over 20 Years experience in Land Seismic. 3D Design by OMNI and MESA. Field processing of 2D/3D land seismic data (MicroMax,ProMax, VISTA, APEX) . Creating and verification of SPS files. Static correction.

Working as In charge OIL/GAS LABORATORY TESTING OF LPG/C2C3/NAPHTHA/OIL ETC. PROCUREMENT/CALIBRATION/MAINTENANCE OF EQUIPMENTS

OBJECTIVE: Add value by leading people and projects, solving problems, bringing order from chaos, turning dysfunction into productivity, in a petroleum exploration or development geology management position.

Contracts Int. Experience in Construction, Management and Administration (EPC), Materials Manager (PMC), Materials Control, Procurement & Expeditor; Fluent in English, conversational in French, Russian. Seeking to continue professional career effectively utilizing my skills and gained experience.

More than(18) years in piping design & construction. Specialize in stress analysis of piping system using Caesar 11. Worked in oil refineries, onshore & offshore, gas plant & petrochemicals e.g. Saudi Aramco & Saudi Basic Petrochemicals ,Petromin Shell & Jeddah Oil Refinery.

More than 10 years’ experience of coordinating structural projects and technology development acquired during the Master and Doctor Courses in Civil Engineering and working as engineer in construction, aerospace, offshore and onshore industries.

Working as a Rotating Machinery Specialist with specialist skills in machinery Componenant condition monitoring by Vibration analysis (CSI RBMware), Bentley Nevada DM2000 online monitoring system, Adre data collection, Flexware performance analysis, Ultrasonic check by CSI sonic scan and etc.

Strengths: detail oriented, flexible, analytical, self-motivated, adaptable, effective communicator and articulate. Experience in field drilling operation management with extensive hands-on technical, administrative and managerial functions; drilling technology assessment & implementation, contract

An accomplished and result-driven Management Executive with multi-faceted marketing experience. Exceptional communicator with demonstrated success interacting with people at all levels.

Lead Process Engineer for Oil& gas Offshore/Onshore projects for Conceptual, Basic /FEED and Detail Engineering, Optimization and De-bottlenecking

I have a total of 13 years of experience working as an Engineer in the Petroleum Industry. For the last 10 years I have been working as a Process Engineer handling all aspects from Conceptual Engineering through to the Detailed Engineering Phase. I am seeking work as a Senior Process Engineer.

Involved in commissioning and pre-commissioning activities.

To secure a long/short-term contract, or permanent position. In Construction, Maintenance, Commissioning etc. My current position is as an Electrical/Instrument Engineer (as to the above position I am negotiable).

Fourteen years of combined experience in petroleum engineering and G&G (U.S. & international.) Experience includes integrated 3D reservoir modeling, numerical simulation, reserves assessment, field development, and reservoir studies.

„Ï A thorough understanding of risk engineering and Health Safety and Environmental (HSE) management systems in petrochemical, chemical, oil & gas industries, gained in a consulting environment. „Ï Consulting experience related to Process Safety Management & Fire Audit, Dust Explosion

Health, Safety and Environment Specialist/Instructor with National (CIED-PDVSA) and International (North Sea) Certification. HSE and H2S Instructor. 20 years experience in Drilling, Production and Crude Oil Transportation in Safety related areas with National and International Operators and Contract

Professional Oil and Gas Geologist (Masters Level) with 10+ years global Wellsite and Operation Geologist experience. Experienced in pre-planning, supervising and post-well wrap-ups of multi-well/multi-rig programs.

Chemical Engineer, P.E. Petrochemical Design Background Experience

 11.0 years exp. normal Operations in a petrochemical & Gas plants mainly in operation of centrifugal compressors (cooper, kobelco & Elliott),reciprocating compressors ( IR ,SULZUR & Burckhardt ) ,all type of pumps (mainl

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out