Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #79880 next resume »»
CONTACT INFORMATION:
View contact information...

Education

B.S. Industrial Technology
A.A.S. Instrumentation and Electronics
A.A.S. Machining Technology

Employment History

Client Safety Specialist, Linkso Nigeria Ltd., May 2008 – Dec 2008
Client representative to contractors and government entities for the West Africa Gas Pipeline Project

* Interpret safety regulations for others such as safety engineers and inspectors
* Monitor compliance with Nigerian Environmental Protection Agency.
* Develop strategies for maintaining compliance with applicable rules and regulations
* Conduct reviews of Engineering, Procurement & Construction Contractor's plans and procedures
* Responsible for monitoring the E.P.C's overall safety performance.
* Emergency Response Team member
* Carry out audits, accident investigations and site inspections
* Develop, execute, and evaluate programs/processes to address hazards and safety issues, including contractor safety programs
* Prepare incident investigation reports, including root cause analysis
* Conduct contractor assessments, safety programs auditing, job safety analyses and hazardous activity safety plans

HSE Advisor, Ascot Nigeria Ltd, Aug 2007 – April 2008
Contractor HSE on projects including pipelines both on and offshore and Station instillations during construction and commissioning

* Lead team of up to ten HSE professionals in all aspects of developing safety management systems and evaluating performance
* Ensured compliance with Nigerian environmental legislation.
* Developed and assisted in preparation of permit application forms for proposed task and projects
* Developed and conducted employee safety and health training programs.
* Conducted multi-media audits (e.g., air quality, waste management, water quality, hazardous materials) or compliance assurance activities (preparing plans, permit applications, etc.)
* Conducted risk assessments and job safety analysis for all activities.
* Carried out accident investigations and assisted in auditing.
* Wastewater compliance and solid waste management
* Provided field execution support (construction, mechanical, electrical, etc.)
* Identified, documented and recommended resolution of hazardous/potentially hazardous conditions and followed through to ensure corrections have been made.

HSE Supervisor, Willbros Nigeria, July 2005 – August 2007
Installed pipelines ranging from ten to thirty inch in diameter throughout West Africa

* Coordinated local SHE tasks (e.g. a regular program of inspections, fire alarm and medical evacuation drills, risk assessments, noise surveys, JSA reviews etc.)
* Conducted periodic reviews of all industrial hygiene procedures and programs
* Supervised hazardous activities, including critical lifts and hazardous transportation
* Lead accident / incident / near miss investigations
* Took lead during emergency response circumstances
* Represented HSE when attending to client, sub-contractors or governmental concerns
* Conducted site inspections and system audits to ensure compliance with the company standards and procedures
* Provided HSE training including confined space entry, permit to work system, fire fighting, emergency response and others
* Prepared HSE weekly and monthly statistical reports as well as trend analysis and occupational injury/illness information

Supervisor, Acorn Services, December 2002 – July 2005
Provided a wide range of forestry services throughout Texas and Louisiana, including hand and machine planting, chemical applications, and prescribed burning.

* Planned daily work activities and selected proper workforce as required
* Worked with governmental officials on all environmental concerns during prescribed burns

Heavy Equipment Operator, Hall-Buck Marine, July 1995 – October 1998
Independent contractor for Hall-Buck Marine at Great Lakes Carbon facility moving bulk cargo from cargo ships and barges to land facility.

Training

Certified Safety Training Specialist by National Association of Safety Professionals
Certified Safety Planning Specialist by NASP
Helicopter Landing Officer Certificate
Incident / Injury Free Train the Trainer by JMJ
Mobile Crane and Rigging Inspector conducted by North American Crane Bureau

View contact information...
«« previous resume next resume »»
Search Results (Resumes 8801 to 8850 of 10848)Go to Search Parameters...
Brief Description
I am looking for an entry level job in the oil and gas industry. I will graduate with a B.S. in Geology from Kansas State University in May, and will be ready for employment at the end of June.
I am working as a Member of a petrochemicals company of much repute at Haldia, India for the last 4 years. Prior to that I had been working with Coates India Ltd, a chemical company based at Calcutta. I have total 6years experience in the field altogether.
I am working with Engro Chemical Pakistan Ltd., since start of 1999, as a Chemical Plant Operator at Urea Unit, and wish to join else where in the world.
branch=EEE fresher location=anywhere
Seeking possible internship/future employment
Recently graduated Petroleum Engineer from the University of MO-Rolla, seeking full time employment in the United States.
I have my IWCF DRILLER CERTIFICATE valid up to 2003. I am very much interested in joining the challenging offshore/onshore industry as an entry-level person.
I have completed Bachelor of Sciences in Mining Engineering. I want to start my career in Oil and Gas field. I am enclosing my CV. Subjects which I have studied in four years program are mentioned in CV. If you have any challenging job or post of trainee or apprentice, please do call.
Petroleum Geologist who has graduated in 1993 from Gadjah Mada University, Indonesia. Still reading several books about drilling, subsurface pressure and seismic stratigraphy until now. I learned Landmark's softwares like Seisworks and Stratsworks.
More than 30 years experience in the field of General Engineering, Plant Maintenance Management, Project Management, Telecommunications, Electrical/Instrumentation and Process Control.
Mechanical Engineer, Project Engineer and Project Management Services
Safety, Environment, Industrial Hygiene, Loss Prevention, Security Program Management
I’m a good communicator who is able to work in a team and can handle pressure. . I am also willing to relocate, work over-time, after hours or/and be on stand-by if and when necessary.
Am instrumentation Engineer with 1 yr Exp in UAE.I am interested in service engineering or Operation side job
Inspection of piping.pipelines,offshore structures,welders qualification,pqr,internal audits,quality plans review,test packs review.
Project Management, Senior Mechanical Engineer, Mechanical & Piping Supervisor, Design Engineer
10 Years in Electrical, Instrumentation & Cathodic Protection. Specially in Erection, testing, calibration of instruments, loop checking, sequence checking, pre-commissioning, Commissioning, Design verification, QA/QC, Project management, Billing and handing over of various projects like EHV Sub-St
Exploration Geologist
An experienced engineering manager, project manager, and program manager with Department and Division operations experience at engineering and construction, and consulting firms. Experience in multi-disciplinary infrastructure projects and environmental remediation.
Planning Engineer, BS Industrial Technology, SAP PM Module Expert, Primavera P3/3e Hands on Experience.
HSE Specialist
Proficient with Leica RTK GPS, Total Stations & survey specific computer programs; Microsurvey, Autodesk Land Desktop, Leica Geo Office & Excel. Experienced pipe line & fibre optic locator.
Safety Officer/Adviser. Cert IV OHS level, Cert IV Training & Assesment. Qld WHSO accredited. 5 years experience - resource, retail industries. Hands on proactive professional to facilitate Safety /Environmental/Risk Management plans/systems to Australian Standards.
Free! Worked as a roughneck for Nabors Drilling USA and had the opporunity to go Directional for Baker Hughes INTEQ where I had been employed as a DD IV until just recently. Was laid off due to lack of work and would really like to get back to work ASAP. I am very responsible and hard working.
Lead Mechanical Piping Engineer Gas and Power Plant site office testpack hydrotest pipe support punch list
Six years of experience in execution of maritime jobs like Construction of Rubble mound breakwater (for Naval Base & LNG Project ) Jetty ( Ethylene Terminal & LNG project) and Berths ( for LNG loading )
Production Manager, Process Engineer, Project Engineer, Metallurgist
Ten years experience in design, construction, water, wastewater treatment plants, buildings, roads, Certified in Occupational Health and Safety Canada, AutoCAD, B.E. Civil, and ME Environmental (Public Health) Engineering, Valid Ontario class G drivers license, Water Treatment Plant, Water Distri
-Installation the Network’s and maintenance,Interface Between systems, Corrective and Preventive Actions of Hardware and Software, Adviser in applications Maquila Systems, Customer service Maquila’s Systems. wireless communications, two way Radios,
i'm 26years old, i hold a B.ENG Degree in Petroleum Engineering from university Portharcourt, with 2 years in petroleum production operation with shell petroleum. Beside my experience i need a company who can employ me IN ANY kind of petroleum engineering JOB.
Dynamic leader and team builder, consistently motivating others toward success.
Seeking an analyst position. Highly innovative graduated offering more than 2 years in business and credit analyst experience and a proven ability to go beyond expectations. Willing to travel and relocate
Five years increasing responsibility and leadership in Power Plant, Analytical Chemistry, Mechanical Operations and Maintenance. Expert in the fields of Water Sampling , Maintenance Planning, and Record Audits
I would like to introduce my self as young ,enthusiastic Mechanical Engineer working currently with M/s Hasan Juma Backet Trdg. & Contg. LLC Oman for last two years in Water & Waste Water field. I can assure you if given a chance i can come up to the expectations of my seniors.
Marine Engineer with an experience of around 5 years at sea, looking for an opening in the oil fields.
please see below
More than 4 years experience in Oil & Gas Refinery in Construction to Start-up Worked in 3 different projects with International Companies. Installation of equipment, Precommisioning & Commisioning system
Would Like To Work In O&G Organization Where In I Can Leverage My Knowledge And Thereby Add Value To The Company. Would like to work on Onshore rigs.
ROV Pilot Training, BOSIET, HUET. Offshore Medicals, STCW 95
diploma im mechanical engineering,able to handle all kinds of equipment s
Graduate in Civil Engineering and Post Graduate in Information technology. Having over 10 years of experience in Marine Civil Construction projects internationally.
Machinist,C.N.C. / Manual 20+yrs. experience
Chemical Engineer, Project and Quality-Security-Environmental Management
34 years in instrumentation industry.
Goal-driven & result-oriented Oil and Gas Engineer with a strong mechanical, pipeline, facilities & project engineering background and over five years experience in the E&P industry.
Hardworking, Dedicated, trustworthy and have the ability to work with others. Acquired Bsc in Mechanical Engineering. Reliable, Honest, responsible, work well independently and on a team. Prepared to do extra work and can work during emergencies. Single with an excellent health. I enjoy interact
11 years experience in the field of surveying and believe that my background and experience would make me a valuable asset to any organization that is looking for a hard working, trustworthy, and professional field surveyor
Heavy equipment operator,heavy mechanic,pre-employment floorhand(roughneck) training
AutoCad,Ms-Office
Qualified Geologist (Hons Applied Science) 10 years exploration experience in Soft and Hard rock Geology,( Gold and base metals) (Victoria Western Australia and Queensland experence. Also hold a Masters in Commerce Uni of NSW. Looking for a position in China as wife is from Beijing.
First   Prev   151   152   153   154   155   156   157   158   159   160   161   162   163   164   165   166   167   168   169   170   171   172   173   174   175   176   [ 177 ]   178   179   180   181   182   183   184   185   186   187   188   189   190   191   192   193   194   195   196   197   198   199   200   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com