Resume - I have been working for 6 years on inland drilling rigs. I worked my way up to d...

Misco Jobs

Resume #79920

CONTACT INFORMATION:
View contact information...

Objective To continue working in the oil & gas drilling industry as an Assistant Driller or Driller.

Experience Assistant Driller & Driller
June 2008 to February 2009, Bronco Drilling, Duncan, Oklahoma
Responsible for the safety of the crew and assist the driller in the safe running of the rig. Also oversee and assist in the proper procedures performed during each job on the rig. Assist the driller in filling out the tour reports each day and throughout any different job change during the day. Also communicate with the next driller and crew what was done during the day and any problems that were addressed.

Motorman
March 2008 to June 2008, Bronco Drilling
Responsible for checking all fluid levels on every motor on the rig, changing oil filters, and general upkeep on the motors and rig. Assist the driller, derrick man, and other rig hands with any job performed on the rig.

Driller
January 2008 to March 2008, B&B Rig Builders, Denton TX
Responsible for the safety of my crew, making sure any jobs that were performed on the rig were done safely and properly. Running the rig during all drilling operations. Making sure that all jobs were logged and tour reports were filled out each day. Making sure that the relief driller was up to date and informed of any changes or problems encountered during the day.

Derrickman
March 2006 to September 2007, B&B Rig Builders, Denton TX
Responsible for mixing all chemicals and maintaining the pits during the day, working on and maintaining the mud pumps, communicating with the driller about any problems with the pumps, pits, or mud.

Derrickman
September 2005 to March 2006, Patterson-UTI, Bridgeport, TX Lead Tong, Chain, and Motorman May 2003 to August 2005, Republic Energy
Well Service Hand October 2007 to January 2008, Miller Well Servicing,
Muenster, TX

Education Lamar High School:1989-1990, GED:1990, Arlington, TX
North Lake Jr. College: June 1990 to May 1991
Richland College: September 1991 to January 1992
Tarrant County Jr. College: September 1994 to May 1995

Certifications Well Control Training: Wild Well Control, August 2, 2008

First Aid & CPR, Bloodborne Pathogens

Forklift Operation Certification

Hazard Comm., Elect. Awareness, & Fall Protection Training

Technical Diver Training: I.A.N.T.D., July 1993

Full Cave Diver: NSS-CDS, June 1, 1994

References References are available on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5351 to 5400 of 10917)

Go to Search Parameters...

Brief Description

Mechanical Draughtsman with Diploma in echanical Engg. 5 yrs. Exp.

Experienced workover rig driller looking for international or domestic work as the western Canadain oilfield has slowed down. I am hard working, a quick learner and very adapable to new surroundings. As you can see from my resume, I am a dedicated and loyal employee as well.

Skills include Lease Negotiations, farm ins and farm outs, JOAs, Oklahoma Corporation Commision forms and requirements, Pooling Orders, Division of Interests, Due Diligence, Title Curative, Ownership Reports.

Qualifications & Skills: Title Runsheets, Lease Take Off's, Ownership Rpts., Lease Acquistions and Due Diligence

structural drafter or designer, preferably on the offshore indestry.

I am looking for a career within a company that promotes from within and encourages continuous learning as well as where my enthusiasm, drive and knowledge will be a valuable asset.

Skills- Creative and Innovative, Good Communicative Skills. Ability to Work under Pressure. Ability To Mobilize And Supervise People. Strong in Team spirit. Microsoft Office software and the Internet, , Qualificatiions- Higher National Diploma (HND) in Insurance (Lower credit), 2007.

Instrument design wihin oil and gas industry. Using Intools and CAD packages.

I have been working for 6 years on inland drilling rigs. I worked my way up to driller last year & have 4 years exp. as a derrickman.

Senior Cased Hole Wireline Engineer

Welding Inspector/Trainer/Supervisor

Deepwater Completion engineer

Master Electrician

Over 25 years experience in the pipeline construction industry. Positions held range from heavy equipment operator, superintendent, foreman, & utility inspector. Qualifications listed with ISNetworld, OSHA Safety certifications

11 years of experience in Project Cost Control on Saudi Aramco Projects in Saudi Arabia. Presently working for Saudi Aramco thru secondment.

+16 yrs of experience in EPC/PMC, TPI Quality control & in Construction Companies. Having well experiences for various stages wise Inspections involving Pressure Vessels, Storage Tanks, A/G & U/G Piping & Structural Steel Works. (ONSHORE & OFFSHORE).

Comprehensive drilling experience of 11+ years in various locations worlwide with E&P Operators. Four years experience as Drilling Supervisor offshore Thailand and Gulf of Mexico. Seven years Drilling Engineering experience onshore and offshore, includes day to day rig operations management.

Production Technology, Completion Engineering, Well Testing, Nodal Analysis, Flow Modelling & Production Optimization

20 years Materials Controller / Coordinator

Sr. mechanical/construction engineer

Over fourteen years of experience in Detail / Design, Supervision and Drafting of plant layouts, piping systems for onshore oil and gas facilities, refineries, pipelines, power & sugar plants and industry utilities.

Qualified Boilermaker/ Welder, with over 25 years experience, mostly on mines and construction.

Dynamic 12 years of professional experience, with 8 years pioneering in the field of Oil and Gas business. HSSE training of company personnel, HSSE master plan implementation, auditing and recommending system updates according to company needs and international legal requirements

I am willing to work as hard as I have to in order to make a specific position work for me.

Petroleum Engineer with 11 years working in Subsurface Services with solid knowledge and field experience in Water Control Technologies, Squeeze Cement with Coiled Tubing, Coiled Tubing, Snubbing , Wire Line, Logging, Well Abandons and Stimulation Jobs. Bilingual Level English - Spanish.

Chemistry, Physics and Calculus Educator/trainer. Native Spanish speaker.

Oil & Gas operation technician (Gauger) in OM&S (Oil Moments and Storage).

SUMMARY Professional Manager with real life experience in business management and successful sales specific to Russian and East European business marketplaces. Experience in working with remote corporate resources. Highly-motivated, energetic team player available for extensive travel.

Challenging position in the Engineering field, in an organization, where I can Contribute my strong analytical and troubleshooting skills and experience in Machinist, Designing and CNC Programming along with the outstanding Interpersonal skills and grow professionally.

I have 12 years of experience in oil and gas field operations. I've handled various responsibilities from exploration stage of field to upgradation of production to 65000 BOPD. Attached below is resume.

Over the past 14 years in the oil industry i have worked from ground up on drilling rigs. roustabout , floorhand ,motorman , derrickhand , driller , and my past employment for the past 4 years has been operations superintendent with duties pertaining to drilling ,workover and production.

Industrial Engineer, specialization in Environmental Engineering. 12 years experience in the Environmental area and oil and gas sector, as an advisor and as HSE Manager. Large experience formulating CEMPS, EIA, Audit programs, etc., and managing HSE budgets.

CHEMICAL ENGINEER with twelve years experience in production/process/project engineering. Looking for Project Management/Senior Project Engineering position either in the USA or Overseas [Preferably Africa].

Fundamental and technical security analysis, fixed income, financial statement analysis, accounting, budgeting, portfolio construction and asset allocation, econometric analysis, financial and statistical data modeling and forecasting, risk management, project management.

Above 12 years experience in the process Industry. Conversant with software packages like windows, Hextran, PI, Lims, Simulator and BAAN. Worked in various capacities in the operation of Petrochemical operation. Loading, Sulfiding and technical support to refinery unit operations

SUMMARY: Strong foundation in oil and gas, mining and environmental geology, in industry and national laboratory setting.

Basin modelling, organic petrography, sequence stratigraphy, x-ray diffraction, 2D seismic

Looking to contribute to the success of a company with my experience, hardwork and dedication to work as a team and make a difference preferably working on Petroleum, Gas or Cargo ships or Oil Rigs

I can work in supply boats, service ship and bunker ship

Around 12 years in the field of Instrumentation and Control System in Olefins Gas Cracker, Petrochemical and Copper Smelter & Refinery Sectors.

"Seeking Professional and Challenging career in Oil/ Gas/ Refinery/ Petrochemical sector. Offer extensive Field experiences in Maintenance/ Shutdown/ Commissioning/ and Construction of Plant and Rotary / Static Equipment”

8 yrs.exp in the commissioning and operation of gasturbines, boilers & all other utilities in a big power plant and fertlisers company

Automotive and Locomotive Mechanic - Knowledgable and Reliable

HR Generalist with 14 years of experience

14 years of experience in managing all phases of Operations, including purchasing, inventory control, transportation, budget preparation and execution, staff development and regulatory compliance. Experience held in manufacturing, Oil/Gas, transportation and chemical industries.

-Primavera (Deep knowledge and experience) / SAFRAN planning program / AutoCAD 2-D (Professional use) /

Proactive HSE expert with 13+ years expertise encompassing HSE in Oil and Gas Construction; accustomed to project Management and coordinating resources effectively to achieve targets within often stringent constraints. Energetic, dynamic, relishes challenges and demonstrates indepth analytical Skill

Working as a Sales engineer in a well established LLC. It’s a 20 years old company which deals with Instrumentation, Automation, Compressors, Air Operated Pumps, Valve Automation, Pneumatic Tools, Transmission Products and Material handling.

HSE, Risk Assessment & Loss Prevention Engineering in Oil & Gas Field

I had a diploma of INTERNATIONAL WELDING ENGINEER in central metallurgical researches and development institute under certification of IIW (international institute of welding). Certificate no IWE AT 0708.. I worked in EMEC as a Drilling fluid Engineer in syria from 3/2009 till now.

First Prev 101 102 103 104 105 106 107 [ 108 ] 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out