Resume - Construction Manager

Misco Jobs

Resume #79972

CONTACT INFORMATION:
View contact information...

Born in Senigallia (AN) Italy on 13/02/1961
B.Sc. degree in Mechanical Engineering (ITIS Ancona / Italy 1982) plus more than 20 years oil & gas plant & pipeline construction experience including offshore and remote locations. Responsible and accountable to manage the execution of FEED, construction, commissioning, handover and close-out of engineering projects. Able to manage various engineering disciplines such as: piping, mechanical, vessels & civil structural.. FPSO/FPU Large topside construction projects.
Languages: Italian (Mother tongue) English (Fluent) French (Poor).
Certificates: 2H Helipad, HUET, H2S/BA. PTW, PTW(s), AGI, ISI, JSA.

07/03-present: Ras Gas (Qatar) – Project Engineer- Lead Construction Supervisor
1. Al Khoor School Conversion RasGas / QatarGas Community
2. Hook-up High COD Project
3. Shutdown Train1&2 GE Frame 7 Compressors overhauling – Inlet Slug catcher
4. Shutdown Train3 (Seawater Loop Upgrade)
5. LNG Loading Facility upgrade Berth #1
6. Locker Room / Lab Upgrade / New Office Building
7. Centre For Safety Training
8. IWM Facilities Upgrade

06/02-07/03: Mideast Constructors – (Qatar)--Construction Manager
1- EPC, NGL 4 Dukhan

02/02-05/02: Snamprogetti – (Qatar)) – Test Pack Leader
1- NGL 4 Mesaieed (1300 test pack)

04/01-02/02: Enereco (Qatar) – Feed Coordinator –
1- FEED Tank farm & Multiproduct Berth (Qatar Petroleum)

03/99-03/01: GE Nuovo Pignone – (Singapore) – Construction Coordinator
1- FPSO P37, EPC Turbo generators, Turbo compressors Modules LM2500+Toshiba 25 MG/ BCL406+BCL458N (BR-Petrobras)
2- FPU P40, EPC Turbo generators, Turbo compressor Modules LM2500 plus+Toshiba 28 MG/ BCL406+BCL458N (BR-Petrobras)

03/97-02/99: ABB Soimi – (Nigeria) – Operation/Construction Manager
1- Flow lines repairs. Shell
2- Egwa rehabilitation. Shell
3- Oturogu Heater exchanger. Shell
4- Ughelli Vessel. Shell
5- EPC, HP Fuel gas facilities project. Bonny Shell
6- Wellhead connection Ebegoro 12 Mbede 22/23. NAOC (Agip)
7- Gas supply to NNPC and SPDC estates. Warri Nigerian Gas Co. Ltd.
8- Thermal Insulation Call-off contract Ob/Ob NAOC (Agip)
9- EPC, Mbede gas lift project. NAOC (Agip)
10- Platform repair Clough Creek. NAOC (Agip)
11- EPC, N-LNG Gas Supply Project Ob/Ob. NAOC (Agip)

02/96-02/97: EMIT (Sudan) – Project Superintendent.
1- EPC, 70 water yards – Khartoum Area

02/95-01/96: C.M.I. - (Italy) Construction Manager
1- EPC, Gas Compression Module for Platform N'Kossa ELF Pointe Noire Congo C/o Rosetti / Ravenna

05/94-01/95: Renco – (Nigeria) - Material Specialist
1- Material SAP Codification (warehouse) NAOC - AGIP - Port Harcourt- (NIGERIA)

01/94-04/94: Renco - (Kazakhstan) Construction Supervisor (Steel Structure)
1- Steel structures for residential building -- Almaty (KAZAKHSTAN)

12/87-11/93: Agip Spa SNOR – (Italy) Construction Supervisor (Mechanica-/Piping-Sealine) Off-shore Platform Chief
1- Revamping offshore platform PCWA –PCWT and 16" sealine
2- Hook-up offshore platform Brenda
3- Low pressure ring with reciproc. Compressor (Waukesha / Nuovo Pignone CK 206 2HE) offshore platform Garibaldi T
4- Revamping and compression gas plant, centrifugal compressors (ABB / Nuovo Pignone BCL 406) -Falconara- (AN)
5- Booster gas plant -Ravenna mare (Waukesha/NP CK 206 2HE) - (RA)
6- Blasting and painting from splash zone to cellar deck (Jacket) of offshore platform Barbara D
7- Hook-up cluster C1 e pipeline 14" gas lift plant Minerbio (BO)
8- Test riser (2^ phase) platform Barbara F
9- Hook-up gas plant Pomposa (FE)
10- Revamping glycol gas plant Minerbio (BO)
11- Revamping offshore platform Amelia
12- Revamping Vessels for gas plant Manara (FE)
13- Hook-up platform Barbara G

03/85-11/87: Snamprogetti – (Italy) Construction Supervisor (Pipeline/Piping)
1- 36" Pipeline 95 Km and lifting station for industrial area service Alta Irpinia. Calitri (AV)
2- 8" Pipeline 22 Km Tricarico-Grassano-Grottole. Tricarico (MT)

10/83-03/85: Co.Imp – (Italy) Draftsman

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 10902)

Go to Search Parameters...

Brief Description

Highly motivated and experienced Maintenance Supervisor.

Graduate Electrical Engineer with over twenty-seven (27) years of hands on diversified oil field experience in Engineering / Projects / Maintenance / Risk - Reliability assessment /& Planning - CMMS,

Sr. piping designer

I am a Senior Instrument engineer with over twenty years’ experiences in engineering design, construction, commissioning and plant maintenance.

Providing structural, stratigraphic interpretation and characterization reservoir analysis services for

I am currently a Senior Technical Analysts iSeries, also as Data Base Administrator. I’m IBM Certified Specialist - System i Technical Solutions - Implementation (including i5/OS V5R4). Over 20 years of experience.

I have experienced as an Exploration Geologist from 1984-1992 and as a Wellsite / Operation Geologist from 1992- nowdays .

I have experience in finance & accounting +/- 20 years at many type of business for Indonesian company and MNC

Progressing from general operator to senior operator panel operator senior technician to production shift supervisor to production supervisor.

Project Engineering Consultant providing twenty years of engineering and project management experience currently executing subsea controls systems projects for oil and gas equipment manufacturers.

I have over 30 years in project controls, cost engineering area, split between Upstream and Downstream, Government areas.

39 years of injection molding experience

B.Sc. & M.Sc, 18 years in oil industry as geophysicist, reservoir geophysicst, surveyor. Marine and land field experience, seismic processing and QC. Project management, personnel management. Technical sales and marketing. Worldwide including USA, Africa, Europe, Middle East, UKCS

M.E. + 18 years of experience + AWS CWI + NACE CIP -1 + API 510, 570 & 653 + ISO 9001 & OSHA 18001 Lead Auditor Training Courses

Experienced in multidiscipline project engineering.

Senior Mechanical Equipment Engineer, 23 years in LNG, Oil, Gas and Petrochemical with Project Management, Commissioning and Maintenance/Reliability background for heavy gas turbines, compressors, turboexpanders as well as all associated mechanical, instruments,electrical equipment and safety system

I am a graduated, experienced, professional marine engineer. 29 plus years of valuable engineering hands-on experience in the Maritime and Offshore Industry.

I have 12 years experience as Civil/Structural designer and my task includes producing structural design dwg with connection details and 3d models. 7 years is in switchgear manufacturing where i was doing fabrication dwg of metal sheet and mounting base of switchgear & sub-station.

Very high administrative, Organizational and Negotiating Skills, B.Sc Business Administration, PGD Business Studies

Sr.Instrumentation Er. Associated with Oil & Gas Operating Company and EPC Contractors/Consultants for 25 years in different positions as Design Engineer for various Conceptual, Front End Design & Engineering and EPC Projects. Worked in multi-engineering disciplines.

Provided leadership and direction to many FEED and EPCm Contracts worldwide. Acquired valuable experience in asset assurance management and team building (people management).

Drilling Supervisor with directional, horizontal experience .

Wellsite Completions Consultant

drilling supervisor experience in drilling operation 24 years, HP/HT 5500m/10000psi, Wells Vertical and horizonatl wells, and UBD

Petroleum Engineer with extensive experience as an engineer and manager of oil and gas operations in deep water, continental shelf and land exploration and production. Experience is both foreign and domestic with E&P companies and drilling contractor. Skilled and practical on site and office superv

Accomplished senior technical geophysicist with 20 years of demonstrated success finding oil and gas through exploration and development drilling in Western Canada and Frontier areas.

electrical engineer Conceptual and detail Engineering, Prepare scoping study, conceptual study, FEED, detailed design, calculations, electrical bid documents, preparing material requisitions (MRs)

I have more than 12 years of experience in cost engineering and estimating activities for the oil and gas, power and manufacturing industries both local and overseas projects in the Middle East, North Africa and Asia. Familiar with engineering, procurement, construction and start-up processes and ma

Microsoft Windows, Office and Project Pipephase, Hysys and Profacin SAP R/3

Completion Tools Specialist, Downhole Tools Specialist, Cementing Supervisor, CTU Tools Specialsit

Twenty (20) years in Oil and Gas Industry. Working primarily at wellsite offshore and onshore, involved in exploration and development wells. Drilling Vertical and Deviated including Horizontal and Extended Reach Wells. Working onshore and offshore, Jackup and Tender assisted drilling rigs

Skills: Excellent communicator•In depth experience in drilling and workover in Romania and Libya; Highly motivated;•Expert skills in foreign languages: French, English;

Construction- and Project management, Engineering and Supervision of mechanical, piping and welding works, e.g. for oil and gas pipelines, pig-, pump/ compressor and metering stations, industrial plants, storage-tanks, structural steel, filling stations, town-gas and water distribution systems, work

Reservoir Simulation (Petre and Eclipse)

A highly qualified Mechanical Engineer with an extensive experience in developing design basis, specifications, data sheets, technical bid evaluation and vendor data review of various mechanical equipment packages for oil & gas projects

10 years in Analytical Instrumentation & 10 years in Process Instrumentation of highly skilled experience gained here and the Middle East. Adept at providing analytical and technical equipment support through troubleshooting, repairing, maintaining, calibrating, adjusting, and installing industrial

Extensive general geophysical experience, last number of years in airborne geophysics. Experienced in Africa operations.

I seek a position as ETO where my experience, training and good work habits will be an asset to your Company. I have 17+ years experience at sea.I have experience with Kogsberg Simrad SDP 21 onboard DSV DP2.I have got DP Technical & Maintenance Course.

Experienced Quality Engineer with Six-Sigma/Lean experience

I have more than 27 years experience in oil and gas industry in India and the middle east countries like Oman, UAE ( Sharjah and Abu Dhabi) both in offshore and onshore . I have worked in pipelines/piping design in consulting , EPC and also operating companies in the above countries

OIL / GAS Industry professional with 35 years experience, strong organizational visual, Expert strategist, Designer, Analyst, Planner, Team Leader, Proven track record combines expertise in Quality Control Inspections, Cathodic Protection (Impressed &Sacrificial Anodes System

In-House Landman

Construction Manager

Free! PDS Piping Designer with Over 20 years experience within the Oil and Gas, Petrochemical, Refinery, Textile, Pharmaceutical and Nuclear Waste Industries

Twenty (20) years professional experience executing multi-million dollar projects in both domestic and international locations, acting as Owner representative in project controls and business management on major EPC, Lump Sum Turnkey and Joint Venture projects supporting Oil projects

A dynamic professional with over 2 decades (25 years) of rich experience in Project Machinery Planning & Execution, Erection & Commissioning, Maintenance, Quality Assurance, Process Enhancements and Man Management.

ArcGIS 8.x/9.x, ArcGIS Server, ArcObjects, Virtual Earth, C#, VB.NET, ASP.NET, VB6

Control & Instrumentation Engineer

Design Expert, Team Leader, Hardworking, Cost Control, Result oriented Instrumentation Engineer who can work on FEED/DD projects with equal proficiency.

Research & Development, Formulation, Manufacture, Maintenance, Project work

First 1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out