Resume - Graduate Electrical with Power Electronics

Misco Jobs

Resume #80354

CONTACT INFORMATION:
View contact information...

EDUCATION & QUALIFICATIONS

2007 – 2008. MSc in Electrical Engineering with Power Electronics,
University of Bradford, United Kingdom.

Modules include:

Power Devices and Applications: Analysis of power switching devices, concept of power switching, gate drives and protection circuitry. Circuit analysis using Pspice (Circuit Simulation).
Application of power switches in motor drives and switched mode power supply.
Generation, distribution and consumption of electrical energy.

Power Converters and Applications:
Switching modes of power conversion and their application in high power

Control System Design:
Principles of control theory applied to the analysis, design and evaluation of process, power and electromechanical systems.
Tuning of PID Controllers for dynamic systems. MATLAB/SIMULINK

Mobile Robotics and Wireless Sensors:
Design and implementation of autonomous robots.
Mechanical design and construction of a robotic chassis, use and interfacing of sensors and actuators, hardware and software implementation of integrating components and real time embedded systems.
Current wireless sensors and its application. Web monitoring of sensor network.

Energy Studies:
Availability and future energy resources and their exploitation. Energy technologies and saving methods.
Life cycle analysis of the energy involved in process.

Digital Signal Processing:
Theoretical and practical techniques used in discrete-time systems. Advanced real time processing of digital signals in electronic systems using MATLAB. Digital filter design

Signal and Systems:
Detailed knowledge of the nature of signals and their response in electronic systems.

MSc Project: 'Investigation of the Extrusion Process'
This project involves the complete monitoring of the extrusion process. Instrumentation and control of the extrusion process. Real time data analysis using LABVIEW software and instruments. Processing of generated data and signals using MATLAB. The research work was carried out at the University of Bradford IRC polymer lab, CIC.

MSc Research Seminar: 'The Perils of Biofuels'
This research looks broadly at the making of biofuel and its increased use in the trend to reduce the effect of fossil fuel on global warming. It defines the effect of biofuels on the green house gases.

1999 – 2005. BEng (Hons) Electrical and Electronics Engineering, 2:2.
University of Ilorin, Ilorin. Nigeria.

Core Modules: Power Electronics, Advanced Electronics, Control Theory, Electric Power System Engineering, Power System Communication and Control, Principles of management, Industrial Engineering.

Final Year Project: 'Design and Construction of an Electronic Earth Leakage Circuit Breaker'
This project involves the design of a current sense transformer, an electronic logic circuit and a control circuit to detect leakage current.

1992 – 1998 SSCE's (A* - C) including English and Mathematics
Command Day Secondary School, Abuja. Nigeria.

EMPLOYMENT SUMMARY

Sep 2008 – Oct 2008. ABB (Asea Brown Boveri), Bradford, UK.
* Reinstallation, Configuration and Maintenance of the British Bakeries Machineries.
* General Electrical Installations in an Industrial based Environment.
* Maintenance and Repairs of Electrical Equipments and Programmable Logic Controllers (Allen Bradley).

Jul 2006 – Jan 2007. First Alert Nigeria Limited (youth service). Abuja, Nigeria.
* Installation and Configuration of Networx Office Guard Device.
* Installation and Configuration of Vehicle Tracking Device (VTM) in Cars.
* Wiring and Installation of Programmable Logic Controllers and Electrical Equipments.
* Maintenance of Power Plants.
* Sales and Marketing of Security Devices.

Feb 2006– Jul 2006. Power Holding Company of Nigeria (youth service). Calabar, Nigeria..
* System Engineering.
* Cloning of Computer systems.
* Physical Networking of Computer Hard Wares.

2003–2004 Interglobal Nigeria Limited (Industrial attachment). Abuja, Nigeria.
* Sales and Servicing of computer systems.
* Installation Of internet Facilities using wireless ISP.
* Suggested new methods of troubleshooting that increased earnings by 20%.

SKILLS PROFILE

IT KNOWLEDGE
* Matlab Software, Labview Software and Instrument, Proteus software. Autocad.
* Windows '95, '98, NT 4.0 - Microsoft Word 6.0, 7.0, 97, Excel 97, PowerPoint 9,

TEAMWORK
* Teamwork involving good listening skills, encouragement and negotiation was an essential part of every group work exercise conducted at university to ensure a successful result.
* My work experience has also allowed me to work with a wide range of people. In addition, I am also a member of the Boys Scout. I particularly enjoy the social interaction when we go camping.

COMMUNICATION
* Good communication skills gained from conducting presentations in front of large audiences consisting of both lecturers and students.
* My vast retail experience has led me to develop excellent customer service skills where communication is a core tool. This also involved dealing with complaints and difficulties calmly and professionally.

LEADERSHIP
* Leadership qualities have been shown through numerous group exercises throughout my university career where I adopt a dominant but yet supportive and positive role.
* Been a troop leader in boys scout required respect from my fellow patrol leaders and boys scout, an essential component of good leadership.

PROBLEM SOLVING
* Problem solving has been dominant throughout my education. It was an essential skill in a number of modules such as research seminar, mobile robotics and control system design especially when tuning PID controllers.
* Often dealing with customer complaints and difficulties has led me to find solutions to problems in a calm and efficient manner.

PROJECT MANAGEMENT
* My final year project allowed me to acquire essential project management skills such as written communication, self-management and problem-solving skills.

PROFESSIONAL MEMBERSHIP

Associate Member of the Institute of Engineering and Technology. United Kingdom.

ACTIVITIES AND INTERESTS

Music: I love listening to ''R & B'' music and once in a while I do listen to rock music
Travel: Summer holiday in Asia and I have also travelled all the states in Nigeria.
Sport: I consider myself an extremely active person who enjoys a wide range of sports such as swimming, long distance running and football.

References

Available on Request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9051 to 9100 of 10819)

Go to Search Parameters...

Brief Description

Free! Varied and broad experience in construction, on/offshore projects, mechanical & piping, shipping, logistics, materials and QA-QC all mainly in the oil & gas industry for over 35 years. Countries worked: Eq/Guinea-Nigeria-Egypt-Ivory Coast-India-China-Canada-Spain-Holland-UAE-Oman-Qatar-Malaysia-Indo

Have been a rigger/ironworker for 10 years+. Have experience in welding and have done this on/off for 8 years.

Mechanical Engineer having 8 years experience in Petrochemical, Oil&Gas sector as Project Planning Engineer, looking for suitable position with family staus

I have more than 5 year of experience under valve manufacturing company.I worked with gate, globe, ball, NRV valves mostly with forged steel, cast steel, and stainless steel. But I have a experience of manual valve only.

Total eleven years of experience in Refineries/Petrochemicals, Chemical & Oil Port Terminal, Offshore Platform projects etc. Presently working with Foster Wheeler, Singapore and Previously worked for prestigious organizations like, Technip-France, Snamprogetti SpA-Italy, Indian Oiltanking, Indo Gulf

Experience in Instruments of PERKIN ELMER and applied bio-system, installation, commissioning, maintenance, and calibration of various instruments;

Electrical Engineer with wireless, optical and integration expertise

Electrical Engineer with previous hands-on experience in electrical and mechanical equipment maintenance

Applying for the post of safety officer in your esteemed concern

I am I.T.I Diesel mechanic with some knowledge of computer. Want to join industry as a trainee for good future

Purchaing, Procurment, Supply Chain Management, Materails, Inventory

Over 20 Years Industrial, I&E Commissioning Field Service Engineer /Electrical Start-up Engineer

I have worked as a chef in extreme conditions in the past. nothing i can't handle big or small jobs.

Mechanical/Manufacturing Engineering, Project/Program Management, Supply Chain Management

I am Tank and piping/pipeline / structure Superintendant

A Buyer /Expeditor with 18 years Gulf experience

Welding Engineer, ASME,AWS D1.1, Welding Inspection, Welding supervision

PhD (Geology), Post MSc Diploma (Hydrogeology), MSc (Applied Geology). Working as GIS Professional and previously worked as Geologist, Lecturer in Environmental Science and GIS Professional.

Internationally Experienced Document Controller.

Skilled in Ms word, excel, power point. I have an SSCE/WAEC from Dom Domingos college Warri, an OND in Mineral Resources Engineering, Federal Polytechnic Ado Ekiti, Ekiti State, Nigeria and HND Pet. Engineering, Petroleum Training Institute Effurun, Delta State Nigeria. With maintenace culture.

I have 2 1/2 years experience in the pumping industry working as an acid and cement pumper operator and 4 1/2 years experience as an acid and cement supervisor. I am knowledgeable in acidizing primary and remedial cementing. I am looking forward to furthering my career internationally.

Working as Technical Instrument Custodian offshore North Sea for Shell. Previously worked as Specialist Systems Engineer for Honeywell for 4 years.

Paralegal

Familiar with all steps of equipment, structure fabrication and piping installation as pertinent specification, document control, subcontractor management knowledge, claim representation and site safety conception.

Diverse technical back ground including hydraulic power plant technician ,fresh water analyst, pump mechanic, maintenance coordinator, maintenance mechanic, and valve installation repair

Draughtsman

Available Immediately To Discuss A Challenging And Responsible Position Where My Background And Experience Can Be Fully Utilized To Our Mutual Benefit.

I am an Electronic Engineer and I have a short experience in Oil & Gas field. My dream is to get an entry level position in this field especially in instrumentation field.

I am a hardworking and honest person looking to have a new career in the oil industry. I am dedicated to my work and would be a good employee.

Pip in indistrial safety, working in ministry of elec & water ,kuwait.

Computer Technician

Principal Environmental & Safety Consultant, oil, gas, mining & major projects; EIA, EMS, Environmental risk etc, climate change, HAZOP, HAZID, Safety managment etc experience. Relocating to Vancouver. Has right to live and work in Canada

Cad Drafter/Designer

Automobile related

Mechanical Engineering Graduate EIT - experience at underground mine sites, maintenance planning, drafting in autodesk inventor, physical asset management, underground mine hoist ropes and lubrication, scheduling

Eight years of experience in the field of Mechanical Engineering Works that primarily concerns on overall mechanical system and details design as well as fabrication.

Instrumentation and Control Engineer

Electrical Engineering, Energy Systems, Power electronics

I am Diploma in Mechanical Engineering. I have adequate knowledge in Auto-Cad in mechanical engineering field. I also have confident experience in X-Steel & SDS2 in steel structure back ground.

Graduate Electrical with Power Electronics

Sub.: Power plant /Utility Electrical Maintenance Engineer

B.Com (Commerce, MS-Word, MS-Excel, Tally, Emails, Internet & Other Software

Shipping Supervisor

Pipefitter with supervisory and training facilitator experience

Experienced Reliability Engineer seeks overseas rotational position (i.e. 28/28)

At present doing a 2 year contract at a bulk fuel installation, in Basrah, Iraq, as an Operator. I have 25 years experience as a fire fighter and paramedic and the last 2 years have been doing aviation and road fuels at an Airport and bulk fuel installation

I have worked with all the various vendor representative from the manufactures as well as many after-market repair vendors from the UK, Germany, France, Italy, Canada, and USA.

I am graduated with M.Sc.Applied Geology with Specialization in Geophysics. I have completed my Internship with Oil and Gas development company (O.G.D.C) in geophysical data interpretation of oil well. I have also worked on different softwares like Golden software (surfer 8), Didger, QuickSyn.

Prevent / correct unsafe acts & condition.

Auto CAD 14/2000i/2004/2005/2006/2007,AutoCAD Map, CAD Overlay, Map Info7.0,Arc View3.2

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 [ 182 ] 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out