Resume - I have been working as an executive engineer(inspection) in chittagong urea fer...

Misco Jobs

Resume #80384

CONTACT INFORMATION:
View contact information...

Date of birth: 20th April, 1970

Religion: Islam (Sunni).

Marital Status: Married.

Educational Qualification:

Bachelor Degree in Mechanical Engineering from Bangladesh University of Engineering and Technology (BUET),Dhaka.

Work Experience:
i)I have been working as Executive Engineer(Inspection) from 2nd April 1997 to till date in Chittagong Urea Fertilizer Ltd (Capacity: 1000 M/T Ammonia and 1700 M/T Urea per day ), an Enterprise of Bangladesh Chemical Industries Corporation (BCIC). Here my responsibilities are as follows:
- to supervise all on-stream and shutdown inspection activities of different vessels,tanks,pipe lines etc.to ensure plant integrity and reliability for the safe and efficient operation.
- to prepare data to implement and update the Risk Based Inspection (RBI)
methodology to enhance plant integrity and reliability.
- to advise on repair techniques, materials selection, welding procedures, inspection and testing procedure.
- to assist in testing and certifying the welders and welding procedure as per
Boiler & Pressure Vessel code ASME SEC. IX.

- to supervise the welding activities of different pressure piping, pressure vessels, tanks etc. of Ammonia, Urea and Utility plant.
- to review WPS and PQR --- to control the quality of welding of different pressure piping, pressure vessels, tanks etc. according to WPS, Drawing, Code, Standard and Specification.
- to ensure the integrity of the weldment by PT, MT, RT, UT.
- to carry out the Post Weld Heat Treatment activity if necessary by PWHT unit as per Boiler & Pressure Vessel code ASME SEC.VIII, DIV-I., UW-40 & UCS-56.
- to carry out thermography (thermal imaging) to detect hot spots of different refractory lined vessels, transfer line,duct etc.by Infra Red Pyrometer.
- to carry out PMI of different equipments,pipe lines etc. by alloy analyzer.
- to measure the hardness of different metals, weldment etc. by Hardness tester.
- to measure the thickness of different pipe lines, vessels, equipment etc. by
Ultrasonic thickness gauge & Electromagnetic thickness gauge.
- to assess the condition of Heat Exchangers,Gear box, Bearing housing etc. by using Electronic Stethoscope.
- to detect the non-pressure & pressure leakage of tanks, steam traps, vessels etc.by using Ultrasonic leak detector.
- to inspect the cathodic protection system of the factory.
- to supervise the repair work of Urea Synthesis Reactor,Package Boilers,Waste Heat
Boilers,different kinds of vessels,coolers,condensers,Polishers, valves etc.during shutdown and Turn Around.
- to carry out the metallurgical replica test activities of different metals.
- to visually inspect Urea Synthesis Reactor weep hole management system.
- to inspect the rubber lined vessels & detect the pin holes of rubber lining if any by Holiday Detector.
- to inspect the tube inside condition of different coolers, condensers, boilers etc. by flexible boroscope.
- to measure the corrosion rate of cooling water systems by using corrosion coupon.
- to assess the microbiological condition of cooling water by Total bacteria count test kit.
- to measure the coating thickness of paint.zinc,enamel etc. over a ferrous and non-ferrous material by using Digital Coating Thickness Gauge.
- to analyze the lube oil condition used in different rotating parts by lube oil checker.
- to measure the speed of different rotating parts by using tachometer &
stroboscope.
- to inspect fire sprinkler system of the factory.
- to measure the sound level of working atmosphere by sound level meter for ensuring the safety of the workers etc.
- to analyze the bearing conditions of different shafts by Bearing analyzer.
- to measure the temperature of primary reformer tubes of Ammonia plant by Optical pyrometer.
- to measure the vibration of different rotating parts by Universal vibrameter.
- to supervise the Insulation, Refractory,Painting and Scaffolding works of the factory.
- to check condition of safety relief valves,prescribes repair as required and witness relief pressure setting including hot service when needed.

ii)I was engaged as a Production Officer in Macro House Hold Products Ltd. (One of the concerns of OFM Group) from 12th August,1995 to 30th March 1997.Here my responsibilities were as follows:
- to inspect the quality of the raw material.
- to check the quality of the products by visual inspection, drop test etc.
- to maintain the workforce level as per production requirement.

Extra Curriculum:

i) Training on Foundation Course on NDT Organized by Bangladesh Atomic Energy Center, Dhaka. 15 to 30 September, 2002.This training course includes PT,MT,ET,RT,UT, different welding methods, welding positions,Symbol of welding and NDT, different welding discontinuities etc.

ii) Training on Radiographic Testing Level-I Organized by Bangladesh Atomic Energy Center, Dhaka. 10-20 May, 1999.

iii) Training on Radiographic Testing Level-II Organized by Bangladesh Atomic Energy Center, Dhaka. 9 July to 9 August, 2001.

iv) Training on Non-Destructive Testing (NDT) Organized by Training
Institute for Chemical Industries (TICI), Ghorasal, Bangladesh from 01
to 07 December, 1998.This training course includes Ultrasonic Testing
(UT), Magnetic Particle Testing(MT), Dye Penetrant Testing (DPT) & Eddy
Current Testing (ET) methods.

v) Worked with the Kobe Steel Ltd. Experts of Japan in Urea Synthesis
Reactor during Turn Around 1999 in Chittagong Urea Fertilizer Limited
(CUFL) & I was awarded with a certificate "On Welding" from Kobe Steel
Ltd. Experts of Japan over the Urea Synthesis Reactor (High Pressure &
High Temperature multi-layered vessel).
vi) Training on Nucleonic Gauge Practices Organized by Bangladesh Atomic
Energy Center, Dhaka. & Certified as Radiation Control Officer (RCO) by Bangladesh Atomic Energy Center, Dhaka. 23 to 29 May, 1999.

vii) Training on Basic Industrial Management Organized by Training Institute for Chemical Industries (TICI), Ghorasal, Bangladesh. This training was focused on Purchase, Banking, Marketing, Material Planning and Inventory
Control (MPIC), Store Accounting, Insurance, Audit, Administration &
Industrial Safety. 30 May to 11 june,1998.

viii) One month Industrial Training at Shikalbaha Power Plant, Chittagong.

ix) Training on Corrosion Protection for Industry organized by Bangladesh
University of Engineering & Technology (BUET), Dhaka. 6 to 9 January,
2002.

x) Worked with the Kobe Steel Ltd. Experts of Japan in Urea Synthesis
Reactor during Turn Around 2003 in Chittagong Urea Fertilizer Limited
(CUFL) & I was awarded with a certificate on Inspection & DPT from Kobe
Steel Ltd.Experts of Japan.

xi) Attended in a workshop on Reverse Engineering.
xii) Attended in a workshop on Behaviour Modelling for Improved Performance.
xiii) Attended in a workshop on Total Quality Management.
xiv) Worked with Magnetische Prufanlagen, s Inspection Engineer of Germany for inspecting the catalyst tube of primary reformer in Chittagong Urea
Fertilizer Ltd.
xv ) Worked with Stamicarbon Inspection Engineer of The Netherlands in
Karnaphuli Fertilizer Company Ltd.(KAFCO) during overhauling –March,2008.
xv) Worked with the MHI experts of Japan in Jamuna Fertilizer Company
Ltd.,in Urea Synthesis Reactor.

Code and Standard: Familiar with ASME, ASTM, AISI, JIS, AWS, API, TEMA etc.

Language: English-written and spoken
: Bengali-written and spoken
: I have completed 150 hrs.training on Japanese
Language Course from AOTS Japanese Language
School,Chittagong,Bangladesh.

Computer Skill:

► Microsoft Office
► Auto CAD (2D & 3D)

Detail Educational Qualification:

Name of Exam. Department/Group Division/Class Year of Passing Board/University
S.S.C. Science First 1986 Dhaka
H.S.C. Science First 1988 Dhaka
B.Sc. Engg. Mechanical First 1995 BUET

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1701 to 1750 of 10924)

Go to Search Parameters...

Brief Description

Extensive experience in power, petrochemical and utilities plant startup, operation and training

I have sufficient exposure in dealing with International Audit and Inspection like MCA-UK., U.S.F.D.A., MCC - South Africa, WHO Etc. Man Management is my proven skill for years. Maintain focus on achieving bottom line result while formulating and implementing the advanced technolog and productivity.

To secure a full-time position with an industry leading company world-wide in IT – Manager / Project Manager / Project Coordinator / Senior Planner

Experienced Drilling and DHS Supervisor

M.Tech Geo-Engineering, 9 years of proven industry experience in Geology, GIS, RS, Image processing, QA & Testing, Performance Engineering on Financial, Accounting, CRM, ERP, Retail, B2C Web & Client Server applications like ESRI arcGIS, ERDAS, MapInfo, AutoCAD, Java, J2EE & .Net, Data Warehousing

Perform all oil and gas estings, envirmental testings, wwtp testing, utility relating testing, chemical preprations, well testings, auxlery fireman, first aider, isorelating working, hse relating working, master in chemistry,

Instrumentation and Control - FEED, Detail Design, Construction, Pre-Commissioning, Commissioning

12 Years of Experience in Oil & Gas, Industrial & Construction Safety (HSE Training)

I am senior Information management engineer with 12 years experience in the Petroleum and IT industries. I have a Bachelor of Mathematic / Information technology

I have been working as an executive engineer(inspection) in chittagong urea fertilizer ltd. since 2nd april,1997 to till date.I have to supervise all on-stream and shutdown inspection activities of different vessels,tanks,pipe lines etc to ensure plant integrity &reliability .

Senior HSE advisor

Electrical Engineer, Planner

cartography_gis_mapping_drafting

110KV/11KV substation equipments like Isolators, Circuit Breakers, Current transformers, Potential transformer, Lightning arresters, Neutral Grounding Resisters & Battery charger, etc.

Chemical engineer OCP MCAD

I here by submit my application for the Toolpusher position in your esteemed organization. I posses about 19+yrs. rigorous, qualitative experience having been associated with leading oil exploring companies. I have experience in directional drilling & under balanced.

I am a civil engineer who has been working in the middle east for the past sixteen years. With a total of eighteen years of professional working experience, of which thirteen years were in the oil/gas and petrochemical projects construction as a civil construction engineer, civil QA/QC engineer.

QHSE Specialist

- seeking reservoir engineering consulting work - 19 years in oil and gas industry - reservoir modeling - well test analysis - petrophysics - production optimization - development planning

Results orientated, hands on multitasked, multifunctional, dedicated manager. Experienced in materials. systems, logistics, & operations management. I am the go to guy to save you from losses in time or money. Please e- mail or call me so we can get together on filling your current opening.

CERTIFIED AS A COMPETENT AUTHORITY AND REGISTERED QUALIFIED PERSON BY INDIAN BUREAU OF MINES, GOVERNMENT OF INDIA FOR MAKING MINING PLANS REGISTRATION NUMBER : RQP/NGP/199/97/A NAGPUR

QUALIFICATION :- DIPLOMA IN ELECTRICAL ENGINEERING WITH FIRST CLASS

MSc in Petroleum Engineering from the University of Oklahoma, USA with over 11 years of experience in both Industry and Academia to offer.conduct reservoir management activities and participate in interdisciplinary reservoir study teams. Bring a focus on performance of complex tasks.

Extensive experience in the petroleum, chemical, pharmaceutical, nuclear and environmental fields. Directed engineering, manufacturing, and construction efforts, including startup and commissioning for owners and contractors alike.

Control Systems (SIS/DCS/PLC) Engineer with >25 years of experience on various process, gas, refining, chemical and petrochemical plants/EPCM in Canada, Saudi Arabia, India & USA. „« Currently doing Detailed Engineering to SAT of Shell¡¦s Upgrader Expansion Project at Bechtel Canada Ltd.

All I&C design aspects. IN-Tools, Microstation, Autocad, MS Office suite software.

Over twenty-eight years in various assignments throughout the oil and gas industry, I have had twenty one years within the production side of the field, including work off the Gulf of Mexico and Venezuela. I have been in charge of multimillion dollar production platforms, responsible for monthly we

G & G Support consultant, experienced and trained on Landmark graphics applications for seismic data interpretation.processing,mapping, time/depth modelling.

Maintaining and overseeing drilling company with 7 drilling rigs and 38 employees

Vastly experienced electrical engineer, manager, superintendent, supervisor

Senior Project Expediter for EPC firms.

I am an operations manager with over 25 years of a proven track record in refinery operation, power generation, training and large refinery projects

Over 25 years of Diverse Design and Drafting Experience

Autocad, Microstation, PDS

Detail engineering and commisisoning

Over ten years in management, team player, strong work and ethical background. Posess excellent oral and written communication skills.

instrument Engineer in OIL& GAS field

Manage, Estimate,billing, Skids and pipe fabrication Shop and field

I am a Master Mariner, presently serving as Senior Master on Crude/Product Oil Tankers of Dynacom Tankers Management

Free! As a hard working IWCF Certified drilling professional with over 23 years of hands-on experience in the drilling industry and as a positive and trustworthy person, I am confident that I can become a reliable addition to your team.

Write-up pre-commissioning, commissioning procedures, start-up schedules and reviewing. Provide necessary technical information for procurement in compliance with tender specifications/data sheets and within budgeted man-hour and project schedules.

A piping designer that has multiple experience in piping industry. Holder of BS Mechanical Engineering with piping design experience over 7 years and more than 5 years of field assignments. A designer that has proficiency in 3D CADWorx, Microstation, AutoCAD, Navis Works, Laser Scan, & PDS trained.

Highly motivted, energetic,and judicious professional looking for employment with diversified corporation for long term employment. Strong attributes include proficiency and multi-tasking. Able to respond to global assignments and enjoy working in a multi-cultural environment.

12+ years of project and design engineering with subsea oil and gas installation contractors and consultants working on package management, site management, installation engineering, FEED and Detailed Design with a strong focus on Subsea Pipelines

OHSAS 18001, ISO 9000, ISO 14001, Operation troubles shootings DCS Control room operations. Plant start up & shut down activities.

Doctor of Philosophy in Science in Exploration Geophysics, IIT, Kharagpur, Calcutta, India (1977-82).• Master of Science, Technology in Exploration Geophysics, Osmania Univ., Hyderabad, India (1974-77).• Master of Information Technology, Curtin University of Technology, Perth, WA, Australia

Mechanical Engineer - Rotating Machinery & Packages

Sound knowledge of all aspects of Oil and Gas Field Process Engineering including Process Simulation, Pipeline Simulation, Preparing PFDs and P&IDs, Vessel Sizing and Specifications, Pump Hydraulics, Line Sizing, PSV Sizing and Flare Header Sizing, Depressurization and Blow down Calculation.

I am having 10 years experience in Oil & gas industry (Offshore & Onshore) in the field of Inspection, QA/QC & NDT. Certified CSWIP 3.2, API 570 & ASNT Level II-RT, UT, MT & PT

I have over 15yrs well testing experience

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 [ 35 ] 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out