Resume - Reservoir Simulation (Petre and Eclipse)

Misco Jobs

Resume #80404

CONTACT INFORMATION:
View contact information...

Reservoir Engineer DCS, Schlumberger, Kuala Lumpur, Malaysia
Nov. 2007 to Date
FFR/FDP Center
Project: A mature oilfield FFR/FDP.
* Review the available reservoir engineering data including fluid properties (PVT), special core analysis (SCAL), and formation pressure testing (MDT, RFT and DST) data analysis, OWC/GOC determination; Transit Well Test data interpretation using Saphir.
* Develop 3D reservoir simulation models for all major hydrocarbon bearing sands.
* Identify key reservoir uncertainties and perform sensitivity analyses to determine their impact on field and reservoir performance.
* Develop recovery estimates for structural uncertainty using the Most Likely, high, and low cases from the static model.
* Develop recovery estimates and production profiles for the Most Likely field development scenario and other alternative depletion scenarios.
* Identify the well locations for future development and optimize the location and number of the planned horizontal and vertical wells based upon oil recovery.
* Recommend additional data acquisition to reduce the uncertainties associated with field development.
Mature Field Fracture Feasibility Study:
* Well productivity modeling:
o Petrel Component: Single Well productivity Model (SWPM) application, using numerical model for offshore well or important well productivity forecast.
o Built 3 wells SWPM models: designed and expert level for handling this modeling and rock typing analysis skills.
* FracCADE fracture design: Reservoir engineering support on field studies.
* Field stress analysis using GR Log and Sonic Log.
Gas field FFR of Vietnam:
* Simulation on a large tight gas field development. Optimize well spacing and well control scheme.
* Gas reserve calculation using p/z plots.
Reservoir Engineer Petroleum Service Inc, Houston, Texas, USA
Aug. 2006-Oct.2007
Project: Future Oil Development (FOD) Project for SPDC
(SHELL PETROLEUM DEV. CO (SPDC), LTD., Port Harcourt, Nigeria)
* Use Eclipse/Petrel software to perform reservoir engineering study, e.g. rock and fluid properties, material balance (MBAL), production data analysis(OFM), vertical flow performance (VFPi) curves. One of the objectives for this study is to prepare good quality data for reservoir simulation.
* Used OFM surveillance system: Generated various plots to diagnose well productivity and production optimization:
o Bubble Maps, Cross Section Plots, Grid Maps, Scatter Plots, etc.
o Nodal Analysis with PIPESIM;
* Built well performance model (Inflow/Outflow model): Generated and selected a suit of optimum VLP curves for specific well using Eclipse, VFPi and PROSPER; more than 7 friction correlation methods have been used.
* New well (vertical & horizontal) conceptual design: Deployed a smart well using Fiber Optic (DTS), ICV and memorized pressure gauge. Implemented single string for dual producing sands and dual tubing strings completion.
* Sand control completion design: Built a sand prediction model and calculated FBHP drawdown, selected Open Hole Gravel Pack (OHGP), Internal Gravel Pack (IGP) and Expandable Sand Screen (ESS) to completion.

Accomplishments: Built new well type selection condition and optimization of well type.

Reservoir/Production Engineer Moston Petroleum Engineering Inc, Calgary, Canada Sep 2002 – Jul 2006
Finished Project: EOR Study for Sandstone Mature Reservoir (Jul. 2003 – Dec. 2004)
* Production Data Analysis to Identify New Opportunities in Mature Fields: Arps Decline analysis.
* Full Field Dynamic building: performing reservoir flow simulation: history matching and prediction runs.
* EOR methods study for high water cut reservoir: the methods included massive hydraulic fracturing, various water shut-off techniques and shifted oil, water or idle wells.
* Infill and re-completion candidate well selection: responsible for plan, design, implementation and on-site supervision.
* Water-Shut-Off (WSO) treatment & viscous water (adding long chain polymer) flooding techniques: completed 36 wells WSO treatments using polymer solutions and crosslinking agents. Highly skill of various chemical formula designs, placement operation and without seriously damaging hydrocarbon-producing zones.
* Used of chemical inhibitors to mitigate corrosion problems caused by CO2/H2S production as corrosion of oil well tubular is rather complex. Coating damage will lead to accelerated corrosion/failure in tubular
Accomplishments: the whole reservoir's water cut from 82% decreased to 40%. Gained oil 1.6 MMbbl by WSO design and implementation.

Finished Project: Tight Gas Reservoir Performance Analysis and OGIP (Jun. 2004 – Jul. 2006)
* Collected production dada and static data of this reservoir.
* Used dynamic material balance method to get average reservoir pressure.
* Interpreted transient welltest data and got reservoir parameters.
* Compared reservoir pressures (got from two methods above) and got concert results.
* Production Decline Curve Analysis and Type Curve Matching method.
* Determination of OGIP and save 1.8 million Dollars (shut-in 5 well X $360k/well) for our client
Participated in Project: Reservoir Database Management Jan. 2002 – Sep. 2002
* Updated client database and enhanced operation functions using SQL.

Senior Reservoir Engineer ZhongYuan Oil Corp. of Sinopec, PuYang, China
Field Asset Team Leader 1992 - 1999
Responsibility:
* Enhanced production: Recognized and applied optimum strategies for management of oil production.
* Reduced equipment downtime: solved various problems during routine production.
* Evaluated well productivity and selected optimum exploitation method. Gas lift, ESP design and string tubing size calculation.
* Reduced well interventions: enhanced production from evaluation strategies to actual on-site preparation and supervision of field work.
* Opportunities capture study for increasing or accelerating recovery from mature reservoir areas.

Finished Project: Artificial Lift Selection for High wc (>80%) Mature Reservoir (1996 – 1999)
* 6 Types Artificial Methods Selection: Gas Lift (GL), Electrical Submersible Pump (ESP), Progressing Cavity Pump (PCP), Hydraulic Lift (HL), Plunger Lift (PL) and Rod Pump (RP).
* ESP Design and Deployed: Implement ESP installment and performance diagnosis activities for 120 producing wells.
Accomplishments: Used 1.5 years, finished artificial lift shift from RP to ESP. accelerated and increased reserve 3% of the whole reservoir. 78 MMbbl oil achieved for 3 years.

Finished Project: White-Temple Condensate Gas Reservoir Exploitation
* Built fluid model using PVTi.
* Injection gas screening: produced gas recycling (lean gas), CO2 and flue gas compensation.
* Bottom-hole water clean out: used chemical bar and wellbore P-T model to control condensates (oil and water)
Accomplishments: Increased 2% recovery and produced additional 0.68 BSTB of condensates within one (1) year. Water cut decreased to 5% and revived 80% of quit gas wells caused by high water cut.

Finished Project: Reservoir simulation for optimizing field development strategy.
* Performed reservoir simulations using ECLIPSE 100 to evaluate various pressure maintenance scenarios.
* Infill well location determination and predicted field production for 20 years.
* Performed simulation studies along the horizontal wellbore to compare production profiles between horizontal well and vertical or deviated well.

Finished Project: Optimize water flooding performance
* Analysis of log data, core data and built a dynamic model using Kro vs. Sw drainage and imbibition curves.
* Determined sweet factor.
* Predicted recovery factor.
* Increased 6% RF for full fields.

Reservoir / Production Engineer ZhongYuan Oil Corp. of CNPC, PuYang, China
Area Production Team Leader 1984 - 1989

Finished Project: Heavy Oil Reservoir Exploitation (1987 – 1989)
* Worked on project involving conventional oil and gas development, cold heavy oil production ('CHOP').
* Located high residual hydrocarbon saturation zones.
* Selected and designed 12 wells for steam injection, control closed period and pressure.
Accomplishments: Enhanced oil recovery by 1.6% OOIP and gained $1.29 million for this three-year project.

Well production management and workover treatment design (1984 – 1986)
* Well production data analysis and parameter optimization, reservoir surveillance and oil gain opportunities selection.
* Designed and implemented acidizing treatment.
* Abnormal production well diagnosis.
Hydraulic Fracture Design
* Participated 156 wells HF stimulation treatment.
* Hydraulic Fracturing Equipment Operation Training by Halliburton Corp in Huston, United States in 1986
Accomplishments: participated in stimulation treatment 360 wells which gained oil for 89 MMbbl.

EDUCATION
* Master's Degree in Computer Study, University of Wollongong, Australia 2000 - 2001
* Master's Degree in Petroleum Engineering, University of Petroleum, Beijing, China 1989 - 1992
* Bachelor's Degree in Petroleum Engineering, Jianghan Petroleum Institute (Now University of Yangzi), Hubei Province, China 1980 - 1984

SKILLS & SOFTWARE:
* Petrel, Eclipse including SCAL, PVTi, SCHEDULE and OFFICE.
* SWPM 3.0: Single well productivity modeling.
* OFM: Database create and data analysis.
* Saphir for welltesting data interpretation.
* Well Performance Modeling by most production software, PROSPER, MBAL, GAP, WELLFLO.
* Nodal Analysis: VFP calculation by 7 correlation methods.
* Hydraulic Fracture software, FracCADE.

TRAINING
* Reservoir management/integration Schlumberger Certificate in 2008

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 10902)

Go to Search Parameters...

Brief Description

Highly motivated and experienced Maintenance Supervisor.

Graduate Electrical Engineer with over twenty-seven (27) years of hands on diversified oil field experience in Engineering / Projects / Maintenance / Risk - Reliability assessment /& Planning - CMMS,

Sr. piping designer

I am a Senior Instrument engineer with over twenty years’ experiences in engineering design, construction, commissioning and plant maintenance.

Providing structural, stratigraphic interpretation and characterization reservoir analysis services for

I am currently a Senior Technical Analysts iSeries, also as Data Base Administrator. I’m IBM Certified Specialist - System i Technical Solutions - Implementation (including i5/OS V5R4). Over 20 years of experience.

I have experienced as an Exploration Geologist from 1984-1992 and as a Wellsite / Operation Geologist from 1992- nowdays .

I have experience in finance & accounting +/- 20 years at many type of business for Indonesian company and MNC

Progressing from general operator to senior operator panel operator senior technician to production shift supervisor to production supervisor.

Project Engineering Consultant providing twenty years of engineering and project management experience currently executing subsea controls systems projects for oil and gas equipment manufacturers.

I have over 30 years in project controls, cost engineering area, split between Upstream and Downstream, Government areas.

39 years of injection molding experience

B.Sc. & M.Sc, 18 years in oil industry as geophysicist, reservoir geophysicst, surveyor. Marine and land field experience, seismic processing and QC. Project management, personnel management. Technical sales and marketing. Worldwide including USA, Africa, Europe, Middle East, UKCS

M.E. + 18 years of experience + AWS CWI + NACE CIP -1 + API 510, 570 & 653 + ISO 9001 & OSHA 18001 Lead Auditor Training Courses

Experienced in multidiscipline project engineering.

Senior Mechanical Equipment Engineer, 23 years in LNG, Oil, Gas and Petrochemical with Project Management, Commissioning and Maintenance/Reliability background for heavy gas turbines, compressors, turboexpanders as well as all associated mechanical, instruments,electrical equipment and safety system

I am a graduated, experienced, professional marine engineer. 29 plus years of valuable engineering hands-on experience in the Maritime and Offshore Industry.

I have 12 years experience as Civil/Structural designer and my task includes producing structural design dwg with connection details and 3d models. 7 years is in switchgear manufacturing where i was doing fabrication dwg of metal sheet and mounting base of switchgear & sub-station.

Very high administrative, Organizational and Negotiating Skills, B.Sc Business Administration, PGD Business Studies

Sr.Instrumentation Er. Associated with Oil & Gas Operating Company and EPC Contractors/Consultants for 25 years in different positions as Design Engineer for various Conceptual, Front End Design & Engineering and EPC Projects. Worked in multi-engineering disciplines.

Provided leadership and direction to many FEED and EPCm Contracts worldwide. Acquired valuable experience in asset assurance management and team building (people management).

Drilling Supervisor with directional, horizontal experience .

Wellsite Completions Consultant

drilling supervisor experience in drilling operation 24 years, HP/HT 5500m/10000psi, Wells Vertical and horizonatl wells, and UBD

Petroleum Engineer with extensive experience as an engineer and manager of oil and gas operations in deep water, continental shelf and land exploration and production. Experience is both foreign and domestic with E&P companies and drilling contractor. Skilled and practical on site and office superv

Accomplished senior technical geophysicist with 20 years of demonstrated success finding oil and gas through exploration and development drilling in Western Canada and Frontier areas.

electrical engineer Conceptual and detail Engineering, Prepare scoping study, conceptual study, FEED, detailed design, calculations, electrical bid documents, preparing material requisitions (MRs)

I have more than 12 years of experience in cost engineering and estimating activities for the oil and gas, power and manufacturing industries both local and overseas projects in the Middle East, North Africa and Asia. Familiar with engineering, procurement, construction and start-up processes and ma

Microsoft Windows, Office and Project Pipephase, Hysys and Profacin SAP R/3

Completion Tools Specialist, Downhole Tools Specialist, Cementing Supervisor, CTU Tools Specialsit

Twenty (20) years in Oil and Gas Industry. Working primarily at wellsite offshore and onshore, involved in exploration and development wells. Drilling Vertical and Deviated including Horizontal and Extended Reach Wells. Working onshore and offshore, Jackup and Tender assisted drilling rigs

Skills: Excellent communicator•In depth experience in drilling and workover in Romania and Libya; Highly motivated;•Expert skills in foreign languages: French, English;

Construction- and Project management, Engineering and Supervision of mechanical, piping and welding works, e.g. for oil and gas pipelines, pig-, pump/ compressor and metering stations, industrial plants, storage-tanks, structural steel, filling stations, town-gas and water distribution systems, work

Reservoir Simulation (Petre and Eclipse)

A highly qualified Mechanical Engineer with an extensive experience in developing design basis, specifications, data sheets, technical bid evaluation and vendor data review of various mechanical equipment packages for oil & gas projects

10 years in Analytical Instrumentation & 10 years in Process Instrumentation of highly skilled experience gained here and the Middle East. Adept at providing analytical and technical equipment support through troubleshooting, repairing, maintaining, calibrating, adjusting, and installing industrial

Extensive general geophysical experience, last number of years in airborne geophysics. Experienced in Africa operations.

I seek a position as ETO where my experience, training and good work habits will be an asset to your Company. I have 17+ years experience at sea.I have experience with Kogsberg Simrad SDP 21 onboard DSV DP2.I have got DP Technical & Maintenance Course.

Experienced Quality Engineer with Six-Sigma/Lean experience

I have more than 27 years experience in oil and gas industry in India and the middle east countries like Oman, UAE ( Sharjah and Abu Dhabi) both in offshore and onshore . I have worked in pipelines/piping design in consulting , EPC and also operating companies in the above countries

OIL / GAS Industry professional with 35 years experience, strong organizational visual, Expert strategist, Designer, Analyst, Planner, Team Leader, Proven track record combines expertise in Quality Control Inspections, Cathodic Protection (Impressed &Sacrificial Anodes System

In-House Landman

Construction Manager

Free! PDS Piping Designer with Over 20 years experience within the Oil and Gas, Petrochemical, Refinery, Textile, Pharmaceutical and Nuclear Waste Industries

Twenty (20) years professional experience executing multi-million dollar projects in both domestic and international locations, acting as Owner representative in project controls and business management on major EPC, Lump Sum Turnkey and Joint Venture projects supporting Oil projects

A dynamic professional with over 2 decades (25 years) of rich experience in Project Machinery Planning & Execution, Erection & Commissioning, Maintenance, Quality Assurance, Process Enhancements and Man Management.

ArcGIS 8.x/9.x, ArcGIS Server, ArcObjects, Virtual Earth, C#, VB.NET, ASP.NET, VB6

Control & Instrumentation Engineer

Design Expert, Team Leader, Hardworking, Cost Control, Result oriented Instrumentation Engineer who can work on FEED/DD projects with equal proficiency.

Research & Development, Formulation, Manufacture, Maintenance, Project work

First 1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out