Resume - Instrumentation and Control - FEED, Detail Design, Construction, Pre-Commissioni...

Misco Jobs

Resume #80453

CONTACT INFORMATION:
View contact information...

EDUCATION AND PROFESSIONAL QUALIFICATION

1996 – 1998 University of Teesside, United Kingdom
B.Eng (Hons) Instrumentation and Control Engineering

1992 – 1995 German – Malaysian Institute, Kuala Lumpur
Diploma in Industrial Electronic majoring in Instrumentation and Control

EMPLOYMENT HISTORY

July 2008 – Present Worley Parsons,
Perth, Western Australia
Senior Instrument Engineer

Involving in FEED and Detail engineering for all the Field Instruments such as preparing Data Sheets for all Field Instruments, checking Inter-Discipline drawing, Reviewing P & ID, Bid Evaluation and Vendor document review.

May 2006 – June 2008 Shell Petroleum Development Company of Nigeria Limited (SPDC)
Nigeria
Senior Instrument Engineer

Part of FEED team is SPDC. Involving in AG Solution project and as a Discipline Lead Engineer for Gas plant project (Brownfield project). Preparing Instrumentation, Control and Automation philosophy such as Process Automation System (PAS), Fieldbus Planning Philosophy, Control Room Philosophy, HMI & Graphic Philosophy, Safety Instrumented Systems (SIS), other field instrument specification, Fire & Gas Systems philosophy & specifications and Fiscal & Allocation Gas Metering Philosophy. Participating in HAZOP, SIL study and FIREPRAN.

February 2000 – April 2006 Technip Geoproduction (M) Sdn. Bhd.,
Kuala Lumpur
Instrument Engineer

Project: Turkmenistan Field Development
Client: Petronas (Turkmenistan) Sdn Bhd..
March 2005 – April 2006

Project Administrator for INTOOLS. Preparing specification and involving technical bid evaluation for Wellhead Control Panel, Actuated Valves, Control Valves, Pressure Relief Valves, Sand Monitoring, Water Cut meter, Flow Element, Pressure Instruments, Temperature Instruments and Level Instruments.

Project: BR-E CO2 Removal Platforms
Client: Talisman Malaysia.
June 2004 – February 2005

Project Administrator for INTOOLS. As a detail design which involving in engineering for the Field Instruments such as preparing Data Sheets (Control Valves, Pressure Relief Valves, Orifice plates, Field Electronic Transmitter and Level Transmitter), Control Valves sizing, Pressure Relief Valves sizing and Orifice Plates sizing, Instrument Schedule and I/O List. Preparation Level Sketches and reviewing Hook-Up Drawing, Skid Vendor Wiring diagram, and Skid vendor hook-up drawings. Assisting Distribution Control Systems (DCS) Engineer and FGS Engineer for preparation of Cause and Effect. Supervising Graduate Engineer.

Project: VCM – PVC Project, Cangzhou, China
Client: Cangzhou Chemical Industry Co. Ltd.
November 2003 – May 2004

As a Basic design which involving in engineering for all the Field Instruments such as preparing Data Sheets for all Field Instruments, checking Inter-Discipline drawing, Reviewing P & ID. Responsible for Flow measurement, Field Transmitter, Pressure & Temperature Gauges vendor technical clarification and Level Sketches.

Project: Intermediate THF/PTHF, Shanghai, China
Client: BASF
September 2002 – October 2003

Involving in Detail engineering for all the Field Instruments such as preparing Data Sheets for all Field Instruments, checking Inter-Discipline drawing, Reviewing P & ID. Responsible for Flow measurement, Field Transmitter, Pressure & Temperature Gauges vendor technical clarification.

Project: Cakerawala Gas Field Development, Gulf of Thailand
Client: Carigali Triton Operating Company (CTOC)
Based in: Technip Kuala Lumpur Office and Offshore, Gulf of Thailand
April 2002 – September 2002

Offshore Hook-up and Commissioning activities. As a member of Hook-up and Commissioning team, involved in Hook-up coordination such Material coordination, dealing Offshore Technical Query, loop check, commissioning, document handover.

Project: Cakerawala Gas Field Development, Gulf of Thailand
Client: Carigali Triton Operating Company (CTOC)
Based in: Penang Shipbuilding and Construction Sdn. Bhd. (PSC), Penang
February 2001 – April 2002

PSC the Fabricator of Riser platform which consists of Main Frame Support (MSF), Module 1 ( Sales Gas Compressor 1) and Module 2 (Sales Gas Compressor 2). As a Lead Field Instrument Engineer task taken care were responding to all technical queries on Field Instrument including Gas Metering package, HVAC package, Deluge skid, Fire & Gas system, Telecom system, and Pre-Commissioning for all system. Duties included; reviewing Fabricator shop drawing, as built drawing, pre-commissioning documents, and vendor coordination.

Project: Cakerawala Gas Field Development, Gulf of Thailand
Client: Carigali Triton Operating Company (CTOC)
Based in: Technip Kuala Lumpur Office
February 2000 – February 2001

CTOC consists of 5 new platforms; 3 Drilling platforms, 1 Riser Platform and 1 Production Platform. Involved in Detail Engineering such as preparing Data Sheets (INTOOLS format) for all Field Instruments, checking Inter-Discipline drawing, Technical Bid Evaluation, and review Vendor Drawing in all 5 platforms.

August 1999 – January 2000 KENTZ MEPC (M) SDN BHD,
(Contract Basis) Gebeng Site
Instrument Engineer

Project: Centralised Utilites Facilities (CUF)
Petronas Gas
Base in: Gebeng, Kuantan

KENTZ is the E + I subcontractor to Foster Wheeler for Centralised Utilites Facilities (CUF) project. Among the tasks under this position involves installation of instrumentation work in the CUF Plant Gebeng.. Responsible for checking in house calibration, field calibration, loop check, pre-commissioning, checking impulses line, installation of instruments, and verified the drawing such as P&ID, instrument location, loop drawing. Duties also included checking the installation of instruments, impulse line, junction boxes, cable routing and location of instruments.

February 1999 – August 1999 Foxboro Malaysia Sdn. Bhd.
(Contract Basis) Project Engineer

Project: Re-Instrumentation of Module 1, 2, 3 and Common Facilities
Malaysia LNG, Bintulu
Based in: Foxboro Kuala Lumpur Office and MLNG Plant, Bintulu.

This position involve in commissioning Distribution Control Systems (DCS) in the field, Factory Acceptance Test and Site Acceptance Test at MLNG Plant, Bintulu. Duties included installation of Distribution Control Systems (DCS) panels, loop check within field to PLC and DCS, trouble shooting (hardware and software). Learned the Foxboro DCS I/A series system.

August 1998 – February 1999 YTL Power Station Sdn. Bhd.
Pasir Gudang
Control & Instrument Engineer

Responsible for maintenance routine including calibration and trouble shooting on all aspects of modern power station instrumentation and control systems. Other duties included PLC programming modification (SIEMENS S5) and handling DCS (TELEPERM XP) including responsible for handling UNIX operating system and VAX/VMS operating system, Plant Management System and SCADA systems. Responsible for software modification such as plant and process software.

July 1995 – September 1996 YTL Power Station Sdn. Bhd.
Pasir Gudang
Control & Instrument Technician

Responsible for maintenance routine including calibration and trouble shooting on all aspects of modern power station instrumentation and control systems. Other duties included PLC programming (SIEMENS S5)

1993 – 1994 BASF Malaysia, Pasir Gudang
Control and Instrument Trainee

This position part of Industrial Training while studying for Diploma. Gained wide experience working with process instrumentation. Duties included calibrating modern transducers for process measurements (flow, temperature, level, pH, pressure, etc.), tuning PI and PID controllers (SIEMENS CONTROLLER) and performing routine checks and maintenance on pneumatic control valves (FISHER valve).

COURSES

1. Essential of Project Management – 2 days – August 2005

TRAINING

1. Basic Offshore Safety Induction & Orientation Training ( BOSIET Training)
(Expiry on July 2005)
* HUET
* Sea Survival
* Basic Life Support
* Fire Fighting
2. Reliability Centred Maintenance (RCM)
3. OPEN VMS Skills for Users
4. OPEN VMS System & Network Node Management 1
5. SCO UNIX Openserver Release 5 Skills for Users
6. SCO UNIX Openserver Release 5 Administration Part 1
7. PLC Simulator (Siemens S5 PLC)
8. Reliability Centered Maintenance (RCM)
9. First Aids Training

QUALITIES

* Adaptable, Communicative, Flexible, Innovative, Reliable
* Self-started, Self-motivated, self-management
* Problem solving, planning and organising
* Work under pressure

SKILLS

* Knowledge in Foundation Fieldbus and Safety Instrumented System
* Skilled in computer packages INTOOLS, MS WINDOW, MS WORD, MS EXCEL, MS POWERPOINT, MS ACCESS, MATLAB.
* Knowledgeable using the Internet and Email.
* PLC programming (Siemens S5)
* Speak and write English, Malay, and Tamil.
* Clean current driving license.
* Have knowledge in various International Standards such BS, NEC, IEC,DEP, PTS,Talisman, BASF etc.

INTERESTS

* Very keen on sports.
* Play golf
* Traveling
* Reading newspaper and Technical magazine

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1701 to 1750 of 10903)

Go to Search Parameters...

Brief Description

Instrumentation and Control - FEED, Detail Design, Construction, Pre-Commissioning, Commissioning

12 Years of Experience in Oil & Gas, Industrial & Construction Safety (HSE Training)

I am senior Information management engineer with 12 years experience in the Petroleum and IT industries. I have a Bachelor of Mathematic / Information technology

I have been working as an executive engineer(inspection) in chittagong urea fertilizer ltd. since 2nd april,1997 to till date.I have to supervise all on-stream and shutdown inspection activities of different vessels,tanks,pipe lines etc to ensure plant integrity &reliability .

Senior HSE advisor

Electrical Engineer, Planner

cartography_gis_mapping_drafting

110KV/11KV substation equipments like Isolators, Circuit Breakers, Current transformers, Potential transformer, Lightning arresters, Neutral Grounding Resisters & Battery charger, etc.

Chemical engineer OCP MCAD

I here by submit my application for the Toolpusher position in your esteemed organization. I posses about 19+yrs. rigorous, qualitative experience having been associated with leading oil exploring companies. I have experience in directional drilling & under balanced.

I am a civil engineer who has been working in the middle east for the past sixteen years. With a total of eighteen years of professional working experience, of which thirteen years were in the oil/gas and petrochemical projects construction as a civil construction engineer, civil QA/QC engineer.

QHSE Specialist

- seeking reservoir engineering consulting work - 19 years in oil and gas industry - reservoir modeling - well test analysis - petrophysics - production optimization - development planning

Results orientated, hands on multitasked, multifunctional, dedicated manager. Experienced in materials. systems, logistics, & operations management. I am the go to guy to save you from losses in time or money. Please e- mail or call me so we can get together on filling your current opening.

CERTIFIED AS A COMPETENT AUTHORITY AND REGISTERED QUALIFIED PERSON BY INDIAN BUREAU OF MINES, GOVERNMENT OF INDIA FOR MAKING MINING PLANS REGISTRATION NUMBER : RQP/NGP/199/97/A NAGPUR

QUALIFICATION :- DIPLOMA IN ELECTRICAL ENGINEERING WITH FIRST CLASS

MSc in Petroleum Engineering from the University of Oklahoma, USA with over 11 years of experience in both Industry and Academia to offer.conduct reservoir management activities and participate in interdisciplinary reservoir study teams. Bring a focus on performance of complex tasks.

Extensive experience in the petroleum, chemical, pharmaceutical, nuclear and environmental fields. Directed engineering, manufacturing, and construction efforts, including startup and commissioning for owners and contractors alike.

Control Systems (SIS/DCS/PLC) Engineer with >25 years of experience on various process, gas, refining, chemical and petrochemical plants/EPCM in Canada, Saudi Arabia, India & USA. „« Currently doing Detailed Engineering to SAT of Shell¡¦s Upgrader Expansion Project at Bechtel Canada Ltd.

All I&C design aspects. IN-Tools, Microstation, Autocad, MS Office suite software.

Over twenty-eight years in various assignments throughout the oil and gas industry, I have had twenty one years within the production side of the field, including work off the Gulf of Mexico and Venezuela. I have been in charge of multimillion dollar production platforms, responsible for monthly we

G & G Support consultant, experienced and trained on Landmark graphics applications for seismic data interpretation.processing,mapping, time/depth modelling.

Maintaining and overseeing drilling company with 7 drilling rigs and 38 employees

Vastly experienced electrical engineer, manager, superintendent, supervisor

Senior Project Expediter for EPC firms.

I am an operations manager with over 25 years of a proven track record in refinery operation, power generation, training and large refinery projects

Over 25 years of Diverse Design and Drafting Experience

Autocad, Microstation, PDS

Detail engineering and commisisoning

Over ten years in management, team player, strong work and ethical background. Posess excellent oral and written communication skills.

instrument Engineer in OIL& GAS field

Manage, Estimate,billing, Skids and pipe fabrication Shop and field

I am a Master Mariner, presently serving as Senior Master on Crude/Product Oil Tankers of Dynacom Tankers Management

Free! As a hard working IWCF Certified drilling professional with over 23 years of hands-on experience in the drilling industry and as a positive and trustworthy person, I am confident that I can become a reliable addition to your team.

Write-up pre-commissioning, commissioning procedures, start-up schedules and reviewing. Provide necessary technical information for procurement in compliance with tender specifications/data sheets and within budgeted man-hour and project schedules.

A piping designer that has multiple experience in piping industry. Holder of BS Mechanical Engineering with piping design experience over 7 years and more than 5 years of field assignments. A designer that has proficiency in 3D CADWorx, Microstation, AutoCAD, Navis Works, Laser Scan, & PDS trained.

Highly motivted, energetic,and judicious professional looking for employment with diversified corporation for long term employment. Strong attributes include proficiency and multi-tasking. Able to respond to global assignments and enjoy working in a multi-cultural environment.

12+ years of project and design engineering with subsea oil and gas installation contractors and consultants working on package management, site management, installation engineering, FEED and Detailed Design with a strong focus on Subsea Pipelines

OHSAS 18001, ISO 9000, ISO 14001, Operation troubles shootings DCS Control room operations. Plant start up & shut down activities.

Doctor of Philosophy in Science in Exploration Geophysics, IIT, Kharagpur, Calcutta, India (1977-82).• Master of Science, Technology in Exploration Geophysics, Osmania Univ., Hyderabad, India (1974-77).• Master of Information Technology, Curtin University of Technology, Perth, WA, Australia

Mechanical Engineer - Rotating Machinery & Packages

Areas of Expertise: Design of offshore structures performing Global and Local analysis of Floating Production Systems, Jack up Platforms, Semi Submersible Platforms & Jackets,

QA/QC-INSPECTOR/ENGINEER- E&I

9+ years of work experience in Content management & Data Cataloguing

With a total of 20 years experience in various welding jobs from an oil gas, refinery & pipeline fabrication, platform, jet & fuel tanks, etc. With experience in pipe welding, pipe fitting fabrication, arc (SMAW) welding, gas welding, TIG, and FCAW welding. Familiar and actual practitioner of Weldi

Presently working on board a Jack-up rig in Qatar (Noble Rig) since October, 2007 as SAFETY TRAINING SUPERVISOR (STS). 11 months worked on board same Jack-up rig in Qatar Offshore (Noble Rig) as Radio Operator / Trainee Safety Officer.Passed with Credit, NEBOSH INTERNATIONAL GENERALC

Mechanical Engineer with 10 years of professional experience mostly in ESP and HPS designed worked for Schlumberger REDA and Woodgroup ESP. in artificial lift.

Piping Superintendent/Supervisor/Field engineer (PMT preference) Civil Engineering Diploma

Groupement Berkine (Sonatrach-Anadarko Corporation) currently base in Hassi Messaoud, Algeria

Working as a field operator in NGL Fractionation Unit , Gas treating unit by MDEA, regeneration of amine and SRU Claus Process Unit for precommissioning, commissioning start up and operation. Operating knowledge of pressure and atmospheric distillation, furnaces for sulphur production, amine

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 [ 35 ] 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out