Resume - I am an experienced Structural Engineer with expertise in the analysis and desig...

Misco Jobs

Resume #80520

CONTACT INFORMATION:
View contact information...

DISCIPLINE Civil / Structural Engineering
POSITION/FUNCTION Lead Civil/Structural Engineer
Consulting Civil/Structural Engineer

QUALIFICATIONS: B. Tech. (Hon.) Civil/Structural Engineering (Upper-Second-Class) RSUST, 1997/1998
DATE OF BIRTH: 18th December, 1971
SEX: Male
MARITAL STATUS: Married
NATIONALITY: Nigerian
PROF. MEMBERSHIPS: Member, American Society of Civil Engineers (MASCE)
Corporate Member, Nigerian Society of Engineers (MNSE)
COREN Registered (R. 14,357 C.Eng)
SPECIALIST SKILLS &
COMPUTER LITERACY: Proficient in the use of SACS, STAAD.Pro, STA PILE3, Framework, Multi-frame 4D, GEOTEC Office, PC Sheet-pile Wall, PCASE 2.08 (Pavement Design & Evaluation Software) as well as other Geotechnical, Foundation and Civil/Structural Engineering software, Microsoft Word, Excel, Visio 2003, Project 2003, Power Point and Serif Photo Plus application software.

YEARS OF EXPERIENCE: 11 Years.

PROFESSIONAL WORK EXPERIENCE
SUMMARY EXPERIENCE (ONSHORE / OFFSHORE)
* Detailed Engineering Design of Offshore Jackets and Topsides.
* Detailed Structural Analyses and Design of Subsea Manifolds.
* Detailed Analyses and Design of Suction Piles.
* Installation and Lift Analysis of Decks and Appurtenances – analysis includes stress analysis of the Structures to check for, and eliminate overstressing of Structural members during lift and installation.
* Calculation of Weight and Center of Gravity of different Modules for Weight Control Program.
* Joint Punching Shear Analysis.
* Detailed Engineering and designs of Riser Clamps and Riser Guards.
* Detailed Engineering and designs of Platform deck extensions and appurtenances.
* Design of Bumpers and Guides.
* Pile capacity and Installation analyses.
* Pile Add-on Analysis and Pile Drivability Analysis.
* Design of Equipment skids, Foundations and Pipe Supports.

EMPLOYER: PLANET PROJECTS LIMITED (JULY 2008 – DATE)
POSITION: PROJECT MANAGER (Consultant)

EMPLOYER: POINT ENGINEERING LIMITED (MAY 2005 – JANUARY 2008)
POSITION: HEAD, CIVIL / STRUCTURAL ENGINEERING DEPARTMENT,
LEAD CIVIL / STRUCTURAL ENGINEER
TASKS ACCOMPLISHED AND RESPONSILITIES
* Senior Structural Engineer on the Bonga South-west /Aparo Define Phase Gas Export Project for Shell Exploration and Production Company (SNEPCO). The OGGS RP-A platform is a Shell platform located off the coast of Delta State in Nigeria. It is a gas gathering and production platform, which is part of the Bonga SW/Aparo Field Development. The overall purpose of the project was to increase production and pigging operations by the addition of a new 16" riser to bring gas from the Bonga FPSO and to receive pigging slugs. This platform supports no wellheads. The project involved amongst other discipline requirements, structural modifications of the following existing structures and topside facilities: main-deck, top-deck and access-deck framings as well as Riser supports at every underwater jacket framing level. I developed a new SACS model of the entire offshore platform structure, including the new deck extensions and new 16-inch riser, and performed the in-place structural analyses, structural arrangement design and member sizing, design of welds/joints and design of riser clamps and supports.
* Lead Civil Engineer on Produced Water Re-injection (PWRI) Project at Obigbo North flowstation for Shell Petroleum Development Company (SPDC) Limited. The primary Objective of the project was to prove the concept of Infield Separation and Injection of Produced Water using Compact Separation Technology in the Obigbo North (OBGN) Oil Field. This involved review of site condition, update of the as-built design, review of the SIEP supplied design package, and provision of detailed interface design to hook-up the various skids of the PWRI packages with the existing facilities and to enable homogenized installation of the skids, provision of appropriate structural foundations for the skids and supports for the routed piping as required and preparation of an Approved for Construction (AFC) package.
* Senior Structural Engineer for the Structural design of the Inlet manifold extension deck and piled substructure for the Santa Barbara FOD Project for Shell Petroleum Development Company (August 2006).
* Senior Structural Engineer on the ENANG 'A' External Slot Addition Project for Mobil Producing Nigeria Unlimited (MPN). The overall purpose of the Project was the addition of one external conductor (Enang 61A ), to accommodate a new well. The project involved the Design, Fabrication and Installation of a protective framework around the 61A external conductor. The structural design process involved incorporating the new conductor guard structure into the existing SACS global model of the Enang A platform and to assess the new overall loading during relevant storm events, and due to boat impact, the analysis and design of the proposed external conductor protective guard frame to confirm the integrity of the guard to absorb a moderate accidental vessel impact and anticipated environmental loads that would act on it in service, while ensuring that the external conductor, platform structure and process facilities are not compromised, structural arrangement design and member sizing, design of welds/joints and lifting and installation analysis.
* Senior Structural Engineer on the UBIT 'B' Internal Slot Addition Project for Mobil Producing Nigeria Unlimited (MPN). The overall purpose of the Project was to increase production at Ubit B by the addition of a new Internal Slot to accommodate one more wellhead. The project involved structural modifications of the following existing structures and topside facilities: main, cellar, sub-cellar and sump decks, jacket framing at elevation (+) 13ft. The structural design process involved the following: The existing SACS model for Ubit B platform was revised for structural modeling and conductor analysis of the Main deck, Cellar deck, sub-cellar deck, sump deck and top of jacket framing at elevation (+)13ft to ensure that these structures withstand the anticipated environmental, equipment, gravity and live loads that will act upon them in service, while ensuring that the platform structure and process facilities are not compromised, structural arrangement design and member sizing and design of welds/joints.
* Senior Structural Engineer on the UNAM 'A' Internal Slots Addition Project for Mobil Producing Nigeria Unlimited (MPN). The overall purpose of the Project was to increase production at Unam 'A' by the addition of two new Internal Slots to accommodate two more triplex wellheads. The project involved structural modifications of the following existing structures and topside facilities: main, cellar decks and jacket framing at elevation (+) 13ft. The structural design process involved the following: The existing SACS model for Unam 'A' platform was revised for structural modeling and conductor analysis of the Main deck, Cellar deck, and top of jacket framing at elevation (+)13ft to ensure that these structures withstand the anticipated environmental, equipment, gravity and live loads that will act upon them in service, while ensuring that the platform structure and process facilities are not compromised, structural arrangement design and member sizing and design of welds/joints.
* Project Engineer on UBIT 'H' Gas Lift Project for Mobil Producing Nigeria Unlimited (MPN). I played an active role in ensuring that the Project schedule was maintained and project information was transmitted to all concerned parties. I also oversaw the activities of the Document Controller and ensured that documents are transmitted to the Client as at when due and also issued the safety statistics report generated by the Safety officer as well as kept track of Project Man-hour usage and developed Project Progress Reports.
* Lead Structural Engineer on the MPN Critical Pipeline segments replacement project which constitutes a subset of MPN Integrity Projects (MIPS) been progressed for execution by a predetermined contracting strategy.
The purpose of the project was to restore functional integrity of main Crude Trunklines from JV production fields, intrafield gathering pipelines and secure supply to the process facility at Qua Iboe Terminal (QIT).
The scope of work included all necessary verification / assessment of the existing specified pipeline on the Asabo, Usari, Idoho platforms, Ubit Sub-Sea Manifold (SSM) near Idoho, QIT flanges for in-coming Idoho and Ubit product pipelines Specifically, the structural scope of work included evaluating the feasibility of installing the new riser before removing the existing riser to minimize production downtime, Provide concept design for any top- side tie-in modification including instrumentation and electrical requirements, Assess Intelligent Pigging facility requirement on each platform ( footprint, lifting mechanism, and congestion).
* Lead Structural Engineer on the MPN Phase II Gas Cap Gas-Lift Project. (Ubit GE, Enang B and Ubit GJ Gas Cap Gas Lift Project), responsible for the execution of the structural scope which included determining the structural work requirements for the gas lift skids.
* Lead Structural Engineer on the Shell Petroleum Development Company (Nigeria) Nembe II Remote Field Manifold Installation Project responsible for the execution of the structural scope of the project which entailed structural analyses and design of Remote Field Manifold Platform as well as the geotechnical/foundation analyses of the substructure.
* Senior Structural Engineer on the Addax Adanga Complex Engineering Studies and Detailed Design Project.
The purpose of these studies (de-bottlenecking and platform modification) was to provide data for company to use the existing ADPP and sister MOPU to handle the increase in production and gas compression interface. The required engineering studies and detail design was for
* The removal of certain equipment and bulk material
* The refurbishment of certain facilities on ADPP
* The addition of certain facilities on ADPP.
* The transfer of control of ADPP to the TPU (Borgen Dolphin)
* The evaluation of the TPU for a classification change to a fixed structure and to evaluate the cathodic protection requirements for the Adanga Production Platform (ADPP). This involves Structural Analysis and Integrity of the TPU of the TPU according to the API RP 2A.
* Adanga Complex SIMOPS & HAZOP.

Responsibilities Performed as Head of Department, Civil/Structural Engineering

OVERALL OBJECTIVE: To ensure the satisfactory performance of the Department and implement any necessary action to maintain the standard of work and performance by the discipline engineers.
Technically responsible for the performance of all work the discipline engineers undertake within both the Department and Project Task Forces.

REPORT TO: Engineering Manager
RESPONSIBILITIES:
* Lead and co-ordinate the Department in a professional and responsible manner with respect to both the Client and Company requirements.
* Ensure that the Department resources are sufficient to resolve all technical engineering problems, whilst maintaining sufficient efforts to achieve positive economic results.
* Report weekly to the Engineering Manager the activity status, resource utilization and total status of the Department and other necessary information.
* Provide the Quality Assurance Manager and the Engineering Manager with evidence that the specified standards/requirements/regulations are implemented, and that all Department work is checked as required.
* Responsible for the quality of all Department work.
* Carry out interdisciplinary checks as required and implement or initiate the necessary action in the event of non-conformance with specified requirements.
* Propose standards where these are missing or unavailable.
* Delegate tasks among the Department personnel.
* Approve timesheets and travel cost for all personnel within the Department.
* Ensure the optimum utilisation of the Department personnel to provide appropriate professional challenge and satisfaction and to further enhance individual qualifications by the use of additional training and external courses where necessary.
* Ensure that other Departments are informed of all aspects of the work that may affect them.
* Participate and involve the Department personnel in the preparation of proposals.
* Co-operate fully with the leader of a project (Project Manager or Project Engineer) where my Department is involved.
* Comply with the responsibilities in accordance with prevailing Company Procedures.
* Participate in project activities and other Department duties, as far as these can be combined with my duties as Head of Department.

EMPLOYER: RIVERS STATE UNIVERSITY OF SCIENCE AND TECHNOLOGY, P.H., NIGERIA (DEPARTMENT OF CIVIL ENGINEERING) (JULY 2001 – MAY 2005)
POSITION: GRADUATE ASSISTANT
RESPONSIBILITY: TEACHING ASSISTANTSHIP

DUTIES
My duties included teaching assistantship in Structural Analysis and Design, Geotechnical and Foundation Engineering Courses at 300,400 and 500 levels of the Undergraduate Programme. I also participated actively in the consultancy services rendered by the Department to Industry.

CHALLENGIES AND SOLUTIONS
The prime challenge in discharging my teaching responsibility entailed effectively training young undergraduates in the science and art of structural analysis and design. To accomplish the above objective, I always ensured that the students develop the mental ability of appreciating structures in three dimensions so as to have a mental and physical feel of 3D forces and moments acting on a structure and the resulting stresses and strains induced in the various members of the structure. I emphasized and taught them QUALITATIVE STRUCTURAL ANALYSIS as the foundation on which QUANTITATIVE STRUCTURAL ANALYSIS and subsequent structural design is based.

PROJECT CIVIL / STRUCTURAL ENGINEER: OCTOBER 2001 – Date (Part-time)
GTI CONSULT, PORT HARCOURT (Nigeria)
Responsible for Civil/Structural Engineering design aspects of various projects (see below):
* Structural design of Jetty and Sheet-pile walls at Alakiri Gas Station for Shell Petroleum Development Company.
* Structural Design and Supervision of Construction of Crane Gantries and Foundation structures for Dresser-Rand Nigeria limited at the St. Clair facility along PH/Aba Road, Port Harcourt.
* Structural Design of A8/A9 Building at Shell Industrial Area, Port Harcourt for SPDC.
* Structural Design of several High storey and industrial buildings.

PROJECT ENGINEER (CIVIL): MARCH 2000 – JULY 2001
RIMAZ ISA ASSOCIATES, PORT HARCOURT (Nigeria)
* Structural design and supervision of construction of Jetty, Ramp, Shore-protection facilities, Hostels and Library at the Niger-Delta University Project, Bayelsa State.
* Contract Administration
* Quality Control of construction works

PROJECT ENGINEER, (NYSC): FEBRUARY 1999 – FEBRUARY 2000
FEDERAL MINISTRY OF WORKS & HOUSING, PORT HARCOURT (Nigeria)
* Supervision of construction of 2 Fly-over Bridges along PH/Aba road at Kaduna and Rumuola Junctions, Port Harcourt by Messrs Julius Berger Nig Plc
* Supervision of construction of Eleme-junction/ Onne road and Overlay rehabilitation by Messrs Julius Berger Nig Plc.
* Structural Integrity checks and evaluation of Choba Bridge along East-West road, Port Harcourt
Private Consultancy
1) Structural design of 2 x 18m span Precast Reinforced Concrete Bridge, Enugu State, Nigeria, March, 2008.
2) Structural design of Workshop and Warehouse Building for 400MW Gas Turbine Power Plant at Alaoji, Abia State for Niger Delta Power Holding Company of Nigeria, December 2005.
3) Structural design of Administration Building for 338MW Gas Turbine Power Plant at Egbema, Imo State, for Niger Delta Power Holding Company of Nigeria, October 2007.
4) Structural design of Central Control Building for 338MW Gas Turbine Power Plant at Egbema, Imo State, for Niger Delta Power Holding Company of Nigeria, October 2007.
5) Structural design of Switchyard Control Building for 338MW Gas Turbine Power Plant at Egbema, Imo State for Niger Delta Power Holding Company of Nigeria, October 2007.
6) Structural design of Fire Station Building for 338MW Gas Turbine Power Plant at Egbema, Imo State for Niger Delta Power Holding Company of Nigeria, October 2007.
7) Structural design of Canteen Building for 338MW Gas Turbine Power Plant at Egbema, Imo State for Niger Delta Power Holding Company of Nigeria, October 2007.
8) Structural design of Guard House Building for 338MW Gas Turbine Power Plant at Egbema, Imo State for Niger Delta Power Holding Company of Nigeria, October 2007.
9) Structural design of Administration Building for 250MW Gas Turbine Power Plant at Omoku, Rivers State for Niger Delta Power Holding Company of Nigeria, February, 2008.
10) Structural design of Central Control Building for 250MW Gas Turbine Power Plant at Omoku, Rivers State, for Niger Delta Power Holding Company of Nigeria, February, 2008.
11) Structural design of Switchyard Control Building for 250MW Gas Turbine Power Plant at Omoku, Rivers State for Niger Delta Power Holding Company of Nigeria, February, 2008.
12) Structural design of Fire Station Building for 250MW Gas Turbine Power Plant at Omoku, Rivers State for Niger Delta Power Holding Company of Nigeria, February, 2008.
13) Structural design of Canteen Building for 250MW Gas Turbine Power Plant at Omoku, Rivers State for Niger Delta Power Holding Company of Nigeria, February, 2008.
14) Structural design of Guard House Building for 250MW Gas Turbine Power Plant at Omoku, Rivers State for Niger Delta Power Holding Company of Nigeria, February, 2008.
15) Structural design of Administration Building for 225MW Gas Turbine Power Plant at Gbarain, Bayelsa State for Niger Delta Power Holding Company of Nigeria, March, 2008.
16) Structural design of Central Control Building for 225MW Gas Turbine Power Plant at Gbarain, Bayelsa State, for Niger Delta Power Holding Company of Nigeria, March, 2008.
17) Structural design of Switchyard Control Building for 225MW Gas Turbine Power Plant at Gbarain, Bayelsa State for Niger Delta Power Holding Company of Nigeria, March, 2008.
18) Structural design of Fire Station Building for 225MW Gas Turbine Power Plant at Gbarain, Bayelsa State for Niger Delta Power Holding Company of Nigeria, March, 2008.
19) Structural design of Canteen Building for 225MW Gas Turbine Power Plant at Gbarain, Bayelsa State for Niger Delta Power Holding Company of Nigeria, March, 2008.
20) Structural design of Guard House Building for 225MW Gas Turbine Power Plant at Gbarain, Bayelsa State for Niger Delta Power Holding Company of Nigeria, March, 2008.
21) Structural Design of the Information and Communication Technology (ICT) Centre Buildings and works at Ogbogu, Ogba/Egbema/Ndoni Local Government Area, Rivers State for the Niger Delta Development Commission (NDDC), November 2006.

HOBBIES:
Reading, Traveling and Singing (Classical and Gospel).

REFERENCES:
To be provided on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7001 to 7050 of 10923)

Go to Search Parameters...

Brief Description

I have a large experience in erosion control works for pipelines

Please Contact ASAP

I have 7 years experience both in Kuwait and in Egypt include Familiarity with electrical control systems & electronics devices Planning & controlling of medium and large size projects

Entry level engineer looking for a career with a well established company. Willing to relocate.

Chartered Mechanical Engineer with 7 years Oil & Gas experience. Hold a U.S. Green Card and now seeking employment in the U.S, preferably Houston.

Petroleum Engineering degree from USL, registered P.Eng in Alberta. Expert in hydraulic isolation, remedial well interventions, technical program preparation. Excellent project management skills. Have work experience in Texas, Louisiana, India and Middle East, on-shore and off-shore.

Over 13 years experience as an Advanced Care paramedic. Extensive remote area paramedic coverage-Pipeline construction and oilfield exploration rig. Helicopter rescue/retrieval.

I have been working as a research scientist at PDVSA-Intevep, the R&D and Support Centre of Petroleos de Venezuela. I specialize in chemical formulation of emulsions and drilling and workover fluids oriented to new developments that impact the productivity of oil and gas wells.

To acquire a technical/management position where engineering experience and managerial skills will significantly contribute to product and process development, increase in productivity and better market position.

I am a Metallurgical Engineer with 7 Years of experience in the field of corrosion control and integrity management for oil and gas pipelines and facilities.

Skills: Critical thinking, active listening, negotiation, persuasion. Qualifications: Product /Proyect /Marketing Manager

Tax Specialist

15 years Domestic and International Management experience. B.Sc. Mining Engineering.

Civil/Structural Designer with over 12 years professional experience

My fourteen years of experience have provided me with a broad range of relevant skills and I am confident that those would be successfully utilized in a new office manager position.

on/offshore seismic data acquisition.Field seismic QC.Seismic recording: SN 388.DESIGN 3D Layout.and NAVIPAC as navigator.Deployment/recovery of seismic devices.Trouble shooting and attend to work shop.

Fasteners Design & Development Engineer

Piping Designer;Intergraph PDS Piping, Equipment, Frameworks Plus and Microstation Modeler. Smart Plant Review (SPR) Operator.; PDMS (Customized Version, General Module) Modeler and Review Reality Operator;AutoCAD Release14 to 2005 Operator/Draftsperson

Regular evaluation of maintenance activities for increasing work efficiency and quality.

An experienced Manager with Expertise in the Establishment of Various Client and Industry Specific Databases with an emphasis on Staff Training, Security, Storage, Sorting, Manipulation, Distribution and Archiving of information and data for a diverse variety of clients. Experience gained in infor

I have been fortunate enough to work all over and have seen many different angles to get the job done. All in all, I work very hard to stay organized and focused on the job. I have +2 yrs experience. I am always willing to learn more at any job to be the best at it.

I have the experience of complete Electrification of UP Petrochemical Plant and commissioned various Coal Handling Plant in various projects in Fenner India Ltd. I was working in Hyundai engineering and construction company ltd, Korea as Astt. Manager(Electrical) in Abu Dhabi for 19no. 33/11 KV

Emergency Officer with the experience of 10 years in safety and emergency management .

SAP, Project Management

Proficient in Instrumentation Job.

Piping Designer Petrochemical with PDS, Microstation and AutoCad

I am an experienced Structural Engineer with expertise in the analysis and design of both onshore and offshore facilities. I have excellent proficiency in the use of SACS software for the analysis and design of offshore structures. I have a Bachelor of Technology Degree in Civil Engineering.

Process tehnology

Experienced trainee driller, compitent derrickman, expiernced floorhand and roustabout with strong workover experience.

Static Equipments Draftsman

I am working as a Executive Engineer in SIEMENS PAKISTAN LTD IN Engineering, Construction & Maintenance Department (Oil and Gas Projects). Currently working on a Project of Lasmo ENI Pakistan Limited working as a field engineer & had gained a experience of Construction of Structure & Piping.

B-Tech Electronics& Instrumentation, 1 yr Exp,APGD in VLSI Design,Advance Diploma In industrial Automation &system Design. Lab view 8.2 ,QMAXV200,ATMEL89S51 microcontroller,VB6,Plc,I/C verification.working as Elect ronics Engr With Russian Tech Centre Pvt Ltd GOA

B.E.Electrical with 1.5 year Experience

Mechanical Engineering (Rolls-Royce U.K. Limited). Canadian Inter-provincial certification in Industrial Mechanical Maintenance. Extensive experience in Maintenance and Maintenance Planning.

International Project Manager

Experience by domains: Engineering - 5 years Client service - 2 years Petrochemistry/Oil and Gas - 5 years LOADING MASTER DEGREE (2007 - 2007), Constanta Loading Master certificate for bulk and liquid cargo. Ovidius University , Petrochemistry. Highschool Chemical QA/QC Surveyour Experiecence

I have experience minerals processing, oil & gas, water, wastewater and environmental industries. I have worked on projects ranging from feasibility studies to detailed design of EPCM projects, and have developed skills in design engineering, site engineering, project engineering and management.

Experience includes Cost Engineering, Electrical/Instrumentation Estimating, Construction Electrical Engineering and proprietary software support. Duties include reporting of various kinds, forecasting, change management, staffing plans, cash flows and more.

Project Management/Engineering/Construction, with over 25 years of professional experience in EPC projects, in Management, Engineering and Construction in oil and gas field, infrastructures, site development, roads, airstrips and buildings, Proven Project Management skills with post responsibility

qa/qc engineer (E&I),6years experienced

wireline engineer, with experience in field operation and management. Geological background with the master's degree and previous working experiences in Italy

M.Sc. Tech. (Applied Geology) in 2007. Recently working in Djibouti AFRICA for exploration of Epithermal GOLD also developing mine for PERLITE.

I want to work in an organization where I can best utilize functional and interpersonal skills to drive the organization towards achieving its objectives

I'm 36 years old Mongolian man. looking for mining operations job. Such as mine foreman, mine planner, translator

Proficient use of Microsoft Office Applications, Operating Systems, SAP R3/R4, Graphical Applications, IE Browser, E-mails, EDMS System such as Livelink, E-Cabinet and MS Access, Equipment Communications, Programming Languages, and Computer Troubleshooting ,Typing speed of 50 W.P.M.

Project Management in Chemical turnkey consultatnts, Master degree in Chemical Plant Design from REC Karnataka, India with Distinction.

Senior OPERATOR Diploma in PETROLEUM ENGINEERING Around 7 Years in Refinery only.

Areas of Expertise: * Engineering & construction of onshore pipeline/piping projects.* Front end engineering (FEED).* Project Management.* Conversant with international codes & standards and Shell standards (DEP).

Responsibilities include the preparation of specification for stress/vibration analysis, identification and preparation of critical line list requiring stress analysis, calculation of loading data, evaluation of nozzle loads resulting from stress analysis result, and selection of pipe supports.

Librarian / Information Management / Information Scientist / Document Controlle

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 [ 141 ] 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out