Resume - Process Engineer 10 years O&G + Mining Experience, Global leader in BR&E Promax...

Misco Jobs

Resume #80736

CONTACT INFORMATION:
View contact information...

SPECIALIZATION:
------------
Process Engineering; Glycol Dehydration, Produced Water Treatment
Product Development; Solid/Liquid/Gas Separation Equipment
------------

OBJECTIVE:
------------
A position that will provide daily challenge in an environment which sponsors creativity and maintains accountability.
------------

WORK EXPERIENCE:
------------
RECENT EXPERIENCE
2006 to 2008: DPS-Delta, LLC New Iberia, LA
Sr. Process Engineer

Process Engineering, Glycol Dehydration
Khalda Petroleum Company (KPC) Salam Gas Train 3 and Train 4 TEG Gas Dehydration Unit (GDU).
Two (2) 120 MMSCFD GDUs operating at 1,000 psig drying to 2 lbmH2O/MMSCF
* Process Design, PFD-P&ID generation through preparation of Equipment and Instrument Data Sheets.
* Operator Training of 27 Egyptian engineers. This was a 24 hour classroom training course covering theory, design, startup, operation, shutdown, maintenance and troubleshooting issues relating SGT3/4.
* Commissioning and Start-up Lead for the Khalda Petroleum Company (KPC) Salam Gas Train 3. Train 4 was subsequently started by site personnel following the methodologies detailed during my Train 3 visit.

Republic of Iraq North Oil Company (NOC) Khurmala Dome TEG Gas Dehydration Unit (GDU).
One (1) 115 MMSCFD GDUs operating at 370 psig drying to 2 lbmH2O/MMSCF
* Operator Training of 4 Senior Iraqi engineers. This was a 24 hour classroom training course covering theory, design, startup, operation, shutdown, maintenance and troubleshooting issues relating GDU.

Nexus/Ramboll Generic I FPSO Gas Dehydration Unit (GDU). Drying 55 MMSCFD to 1.5 lbmH2O/MMSCF
Murphy Oil/SBM-Atlantia Thunder Hawk TLP. Drying 70 MMSCFD @ 2000 psig to 2.5 lbmH2O/MMSCF
Petronas Carigali Ruby Field FPSO GDU. Drying 12 MMSCFD to 6 lbmH2O/MMSCF
ENI/AGIP OML 120 Oyo Field FPSO GDU. Drying 60 MMSCFD to 1.5 lbmH2O/MMSCF
* Process Design, PFD generation and equipment sizing. Depending on the scope of the specific project or as requested by client performed detailed engineering calculations or advised on specific issues.
* In all cases above, extensive use of Bryan Research and Engineering (BR&E®) process simulation software ProMax® was used to optimize unit design. The integrated equipment rating packages were used to provide preliminary equipment sizing for columns and heat exchangers.
* Developed novel HTU/NTU calculation method to provide structured packing depth calculations.
* Provided process engineering support across global business platform.
* Detailed familiarity with NORSOK, API, ASME, NACE, NORSOK and ISO specifications.

Product Development, Pitless Air Drill Separator
Weatherford International, Research and Engineering
* Under contract to develop a portable unit to capture solids and dedust 6000 scfm of air-drilling solids.
* Pending order for first article to be fabricated and deployment to Western US for field testing.

PREVIOUS EXPERIENCE

2004 to 2006: Krebs Engineers, Tucson, AZ
Project Engineer

Project Engineer, Wellhead Desanding Hydrocyclones
Otway Gas Project Thylacine Field unmanned platform, Bass Straight Offshore Victoria, Australia
* Project execution requiring compliance with strict customer specifications in a difficult application in which due to the unmanned nature of the facility, operator intervention was not an option.
Pemex Luna Field onshore facility, Tabasco, Mexico
* Detailed 1-off mechanical design of 600# Class 20" Well Head Desanding Hydrocyclone with solids.
* Assisted with installation and pre-commissioning on site.

Project Engineer, Sand Washing Hydrocyclones
Shell/Albian Sands, Muskeg River Mine Alberta, Canada Also
Suncor Energy, Millennium Mine Alberta, Canada
* Twin development projects testing the feasibility of multi-stage sand washing. In both cases large and highly instrumented pilot plants were fabricated and shipped to site for field assembly.
* Supervised installation of equipment and assisted in site management to resolve specific fit-up issues.

2003 to 2004: US Filter Zimpro, Rothschild, WI
Process/Product Engineer
Process/Product Engineer, Produced Water
* Selected by USF/Zimpro Management for relocation to Rothschild, to function as key agent of technology transfer of USF/Whittier products to Rothschild Operations team.
* Lead Process Engineer for all USFilter produced water projects. Specific product management responsibilities for all Hydrocyclone, Induced Gas Flotation and Walnut Shell Filter package projects.

1998 to 2003: USFilter Whittier, CA
Product Development Manager
Process/Product Engineer, Produced Water
* Listed as sole inventor on both process and apparatus U.S. patents for "Hydrocyclone Bundle"
See US Pat. 6800208 and US Pat. 7291268. Completed all design work using 3D design software, and substantially wrote patent text (excluding claims).
* Responsible for the evaluation of technologies for internal development, licensing or acquisition. Working with sales department, identify opportunities to improve existing equipment designs. Provide process support to customers and sales department in selecting from the broad product portfolio of USFilter. Active member of the Separations and Filtration "Technical Expert Group", part of USFilter's North American Technology Center.

EDUCATION & CERTIFICATION:
------------
Bachelor of Science, Chemical Engineering, California State University (Long Beach), 1996
Certificate in Hazardous Materials Management, University of California Irvine 1994
------------

ADDITIONAL INFORMATION:
------------
Recognized by Bryan Research and Engineering (BR&E) as being a leader in the application of their Promax process simulation software in the areas of Gas Dehydration (TEG) and Sweetening (MDEA).

I have developed Microsoft Vision "Smart" P&ID stencils which, also extensive Excel calculational data sheets which leverage data values from Promax Reports and are capable of automation linkage with Promax directly.
------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6201 to 6250 of 10902)

Go to Search Parameters...

Brief Description

MSc GEOLOGY, RESEARCH WORK IN ELECTRICAL RESISTIVITY METHOD IN GEOPHYSICS FIELD

B.E.(Chemical), 6 years of experience in offhsore oil and gas platform of which 3 years in control room.

Over 9 years experience in Instrumentation & control in Chemical, Power, Cement, Sugar & Petrochemical industry

I have worked in Pre-Commissioning, Commissioning, Normal running Plants. In India and Abroad, both places I have worked. I have worked in Chemical, Fertilizer and oil and gas industry

QA/QC Inspection, Fabrication, Installation, Facilities Upgrade etc.

Special Skills in DCS Operations

SAP SD functional cons. resume total 6 yrs exp 3yrs in SAP SD+ IS OIL functional consultant

Medical support to clients operating in remote or hazardous and offshore environments worldwide. Maintaining adequate medical facilities. Providing services such as First aid training, Health and safety checks and enforcing the companies HSE plan, and ensuring a safe working environment.

Mechanical, Automotive, Project, Calibration, Engineering, Production

Instrument technician

I am working as safety officer at Aramco Saudi Arabia for more than 6 years. I am interested to work in your country. Please arrange my telephonic interview and if you need further documents please inform me on my email.

Operation and Maintenance of Utilities, Project Management, Energy Management, Six Sigma and IT applications

In Indian Naval Hydrographic Department, I have worked in various organizations of Naval Hydrographic Department at various capacities including survey assignments onboard ships, National Hydrographic Office as Quality Controller/Quality Assurance member and National Hydrographic School as Hydrograp

15 year career of Document Management and Control. Assisted in the development and implementation of EDMS. Held over sea positions in various European locations, Middle East and Asia. Conversant with International standards, guidelines and regulations.

A Nigerian. Qualified and experienced geoscientist with 5+years cross-functional experience.

To offer services as Senior piping designer for onshore and off shore oil and gas projects by using PDMS & PDS 3d model system

Process Engineer 10 years O&G + Mining Experience, Global leader in BR&E Promax process simulation, Gas Dehydration, Water Treatment (both produced water and seawater injection), hydrocyclone, flotation and filtration technologies. Comfortable from the Pre-FEED level down to the nuts & bolts.

Fourteen years of experience in Office Administration, Procurement, HRD, Public Relation and Sales Coordination has energized me to seek suitable position in renowned companies. My quest is to further broaden my horizons so as to facilitate better opportunities to serve &better objective to achieve

Responsible for business development of company & for recruitment of professionals like Project Managers, Engineers, &Technicians for Engineering, & Construction industry in India, Middle East, ,etc.To develop and manage our own portfolio of clients and source the most suitable candidates .

International Weldig Engineer (IWE) , CSWIP 3.1 and Level II(two) Pt,Mt,Ut and RT

Degreed in occupational safety and health, 18 years experience in construction safety, sveral yrs. Overseas exp. Working with multi-national staff. Excellent medical background

I am a practicing Health & Safety professional and I have built substantial experience as an HSE Advisor with various organizations onshore, offshore and internationally.

A highly qualified and experienced marine engineer, with extensive experience on LNG ships. Skilled in all management roles and function including IT. A skilled problem solver who takes general overview and generates viable solutions.

Experienced Industrial Structural Engineer - concrete, steel - 20+ years, UK & US codes

HSE Manager/adviser with 25+ years experience with large multi-national corporations. Developed successful top quartile HSE/Safety programs on 4 continents. Expert in HSE management, risk assessment, and HSE/safety auditing techniques.

Exceptional performance as a Senior Process and Production Engineer for major industrial, polymer, refining, and specialty chemical manufacturing companies on the Texas Gulf Coast.

U.S Navy Aviation Gas Turbine Jet Mechanic

-A team player, flexibile, detail-oriented, and self-motivated

Working as a CNC Lathe machine operator from 04/11/2008 to till date in L&T Plastics Machinery Limited(Injection Molding).,Chembarambakkam, Chennai .

Acquisition and title research

Over 11 years of SAP BW BI experience as a developer, Lead and Manager

Diploma In Mechancial Engineering+NEBOSH Level-3+Environment, Health and Safety Management Specialist Certification from NASP of USA+ ISO 14001:2004 & 9000:2000 Certified Lead Auditor with 15 Years Experience in Oil&Gas as HSE Advisor/Engineer/Supervisor/Coordinator/

I have more than 15 years experience in the field of process control instrumentation and analyzers and have many related field trainings from abroad and in Pakistan. I am forwarding my personal profile for your consideration.

Draftsperson - coil tubing downhole tools, coil tubing wellheads, etc

Engineering experience since 1999 in diversified electrical, instrumentation, automation, and industrial computer applications, generally related to Oil & Gas Industry, Steel, Automotive, Aluminum, Process and Machine applications.

Experience Derrickhand

Project Expeditor

Mechanical Engineer Professional experience of 35+ years in Engineering and Project Management

AutoCad drafter

Piping Designer – 3D Modeling - PDMS - Microstation - Plant Space – 3DM - Auto-CAD

I have a 4 years degree in geology with a relevant experience as wellsite geologist. Actually I have witnessed more than 30 horizontals wells drilled and 10 verticals one's.I can say that I have gained a great knowledge of how to solve drillings problems when they occur.

Having more than 9 years of experience in petrochemical, oil & gas process plants and utilities. Having experience in commissioning, pre-commissioning activities in Field, DCS & SCADA. (FOXPORO & Emerson Delta-V Systems)

Key specializations: GE Turbine control systems- MKIV, MKV, MKVI, GE excitation systems- busfed, potentialand compound source, SVR, rotating DC, brushless, EX2000, EX2100, Load commutated inverters (static start), electrical and generator protection. DLN 1.0, 2.0+, 2.6 systems, versamax PLC, genius

BE (MECH ) PIPING DESIGNING & STRESS ANALYSIS

Well Engineering skills

Autocad drafter designer

I am a fully qualified derrickman and have been working offshore for the past 9 years.

I have learned Software : Pipesim 2000, Caesar II, Microsoft Office, Power Point, Autocad 2D

I worked as mud engineer for 2 years in Indonesia and now I am solid control engineer and I am running a job for Drilling Project in Libya

33+ years in the oil and gas service industry. His portfolio includes (but is not limited to) field operations and supervision, sales, marketing, business development, and management.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 [ 125 ] 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out