Resume - Modeled and prepared detail engineering drawings for the projects executed inter...

Misco Jobs

Resume #80750

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVE:

To take up the career in design field where I can make the best use of my capabilities to contribute to the all round success of the establishment and thereby enhancing my professional growth.

PROFESSIONAL SUMMARY:

„« Having One plus Experience in the Design Field.
„« Knowledge of Developing The 3D- Models And 2D-Detail Drawing Using State-Of -Art-CAD Tools (Pro-E WF2.0, Solid works2007 and AutoCAD)
„« Knowledge of Selection of Fits, Dimensioning and Geometric Tolerances.
„« Knowledge Of ERP (Enterprises Resources Planning) Software JD Edwards In Part And (BOM) Entries.
„« In-Depth Knowledge Of IS Standards for A Variety of Fasteners.

PROFESSIONAL EXPERIENCE:

ORGANIZATION-1: LARSEN & TOUBRO LIMITED, LTM BU.
Manapakkaam, Chennai.
(Deputation through Shimi Designs & Consultants, Chennai}
Period: From (April 08 up to till date)
Designation: CAD ENGINEER
Department: Project R & D

Work Responsibilities:
„« Modeled and prepared detail engineering drawings for the projects executed interference checking and subsystems interfacing for the entire equipment.

„« Preparation of Fabrication and Machining drawings for all assemblies and components (DFM)

„« Implementing Engineering Design changes as per customer's specifications.
ORGANIZATION-2: THE INDIA METAL WORKS.
Thiruvottiyoor, Chennai.

Period: From (Sep07 to April 08)

Designation: CAD ENGINEER

Work Responsibilities:

„« To create the development drawings for the sheet metal components using Pro-E and Auto Cad 2004.

„« Modification in drawings as per customer requirements.

KEY PROJECTS:

„« PROJECT TITLE: HELICOPTER HANGAR SHUTTER

Client: Mdl, Mumbai and GSL, Goa

Soft Ware Used: Pro/e Wildfire 3.0
Description:
Helicopter hangar shutter is used to prevent the helicopter stored in ship hangar from adverse atmospheric condition and ensure weather tight compartment on the hangar
Key accomplishments include:
„X Development of a unique concept of "multiple arms bearing less system".
Successful testing of prototype by conducting factory acceptance trials (FAT) and harbour acceptance trials (HAT).

„« PROJECT TITLE: TRANSPORTER CUM LAUNCHER.

Client: DRDO - Pune.

Software Used: Solid Works- 2007

Description:
Transporter Cum Launcher is a fixture used to transport, integrate, and tilt the cylindrical article into a launch mode. It also possesses a payload integration device which integrates payload with the article. It is mounted on a rail wagon. The object is in two parts placed on wagon and transported on transported supports. Smaller and longer lengths of cylindrical article shall be transported without integrating with each other. Smaller part of the article is integrated with longer length of object with the help of integration device. The fully integrated article is mated with tilting supports.

* Design for Manufacturing
* Modeled entire system using Solid Works- 2007
* Prepared Detailed drawings as per GD & T

ACADEMIC PERFORMANCE:

„« BE IN MECHANICAL ENGINEERING - [2003-2007]

Noorul Islam College of Engineering, Kumaracoil, K.K.Dist.
Percentage Secured - 69%

„« H S C [2003]
St.John's Hr. Sec. School, Palayamkottai, Tirunelveli Dist.
Percentage Secured -65.13%

„« S S L C [2001]
St.John's Hr. Sec. School, Palayamkottai, Tirunelveli Dist.
Percentage Secured -70.5%

SKILL SET:
* Pro Engineer (WF 2.0) & (WF 3.0): Part Modeling-Assembly-Detailing
* Solid Works- 2007: Part Modeling-Assembly-Detailing-Animation & Piping.
* AutoCAD 2006.

PERSONAL PROFILE:
D.O.B: 07/08/1984

REFERENCE:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9001 to 9050 of 10926)

Go to Search Parameters...

Brief Description

Over Two years of experience in Petroleum Refining & Downstream process, and Chemicals in the Field of Continuous Process plant Operations as a Asst. Manager and Shift Feild Engineer, Troubleshooting of process and equipments handling, vendors co-coordinating, and Commissioning and Trunaround Exp.

An M.Tech(Electronics) graduate with work experience in Industrial Automation, Embedded programming and teaching.Key skills include:SCADA, C, C++, Embedded C, VHDL, Verilog, MATLAB, Communication Protocols.At present, working for ABB India and has successfully completed a number of projects.

Microsoft Office, HRMS, Windows XP, Professional, other administrative softwares

Modeled and prepared detail engineering drawings for the projects executed interference checking and subsystems interfacing for the entire equipment.

Engineering

Materialsman/Coordinator with 10 year experiance of oil field, Supply base, Offshore Rig and Land Rigs

Power Transmission Line & Lighting of Highways, Electrical Design & Low Voltage, Electromagnetic Field

Experienced involved problem solver with more than nineteen years of progressive experience, offering significant expertise in project management, manufacturing and oil and gas accounting management, and focused on management operations and am able to continue to learn new processes and apply them.

I am an advanced Scaffolder (CISRS), Advanced Scaffold Inspection, Risk Assessment Trained, and am Computer Literate. I have an extensive understanding of scaffolding and design, the importance of health and safety and the best ways to achieve the goal of supplying clients with a cost effective and

As evidenced by resume I am extremely skilled in sales management and business development. I have extensive knowledge and experience in electrical, mechanical, mining ans sales/service management.

Very flexible, Diverse experience. Looking for a place to excel.

I have over 10 years as a driller and derrickhand

17 years safety experience, Grad Dip OHM, MSIA, (RSP Australia), Trainer

Piping designer

Experience in pipeline, Power Plat Installation

Technical Writing with 15 Years of Experience in the UAE

Electrical engineer, Constraction, Control & Instrument, Coal, Oil & Gas projects,

Seeking Managerial or Supervisory position in Logistics & Transportation.

instrument supervisor 5 year experiance

Chief Enineer, Limited, Oceans, Unlimited HP

Jamiu Badmos is a Registered Engineer cum HSE Professional with over 9yrs experience in QHSE & Project Management

Experience in Automation Systems (Triconex Safety Control Systems, Honeywell FSC). Bachelor of Telecom/Control Systems Engineering. Experience in GCC countries. Currently working as an Application Engineer

23 Years of Various field of accounting

Director

I would like to apply for Engineer or any kind position which is suitable with my education background and experience. I graduated from Trisakti University majoring in Mechanical Engineering with GPA: 2.80 (scale of 4.00) in 1998. I offer skills through formal education and experiences.

Analytical skills to improve methods and procedures applying ESP and Gas Lift systems to develop exploratory well completions, workover jobs, water control, and general oil field operations. Knowledge of modern well construction (completions) operations and techniques.

I am mechanical engineer graduated in 1997 in Simon Bolivar University, Venezuela. I have five years experience in drilling operations. I have experience in HPHT, directional, high angle, exploration, onshore and offshore wells.

An Engineer working at Alcatel Egypt, S.A.E. MND division. Looking forward to change my carrier from telecommunication to Petroleum/ Gas/ oil. I am very energetic, willing to learn and have a very good team spirit. I love challenge and can work in any working environment and conditions.

I am a young man who has worked hard all and received little for his efforts, and what I have received is gone. I am looking for a new start in a new line of work that is more profitable than those jobs I have had in the past.

Radio telecommunications operator based in Amman/Jordan , have various work experience in coastal radio stations, on ships board, united nations . total experience over 5-years . Looking for good opportunity in oil/gas offshore, onshore projects : world-wide as RADIO OPERATOR

Shift Supervisor Shift Foreman Plant Operator

working in French company named Air liquide as a manager sales & customer support since 1998. This company is in the industrial gases . I am searching job in the same field. Any Cryogenic Company Interested Please call me.

I have been working in the Safety, Health and Environmental (SHE) field for more than 9 years. Throughout these years I have been exposed to various SHE related requirements and problems. One of my key competency area will be managing workplace day-to-day safety, health and environment issues and

I am seeking Medical Advisor/Occupational Health position to continue my occupational physician’s career with a multinational company.

Welder Fitter, with pressure certification (F3/F4 on 5G uphill progression -mild steel). Worked in fabricating shop on commercial and industrial products. Very proficient with GMAW and SMAW. Little experience with GTAW. Worked mostly mild still and some alloy. Little aluminum experience.

b.e(industrial electronics),skills are worked on siemens/abb plc,ac & dc drives,troubleshooting ,hydraullic know how,pneumatic know howsiemens drive,lenze drive,ac & d motors and their controlling,worked over software like cmms,icam,matlab,autocad,orcad,software used in equipment/machineries.

Ability to perform field inspections, risk assessment, review, prepare procedure and hand.Self-development in administration and management skillsle permit to work system.Ability to improved performance, utilizes effective follow up actions to solve employee or work related problems.

Title of qualification awarded Bachelor of Science in Physics Name and type of organisation providing education and training Universidade do Algarve, Faro, Portugal

I have 25 years experience in the Instrumentation field as Instrumentation supervisor, Instrument QA-QC Inspector and Instrumentation technician. Present I am working for (YANSAB) Yanbu National Petrochemical Company a SABIC affiliate (Kingdom of Saudi Arabia.).

Previously worked for a oil and gas brokerage firm in Houston, Tx at the end of 2008. Experience as leasing agent and experience in running title in Texas.

A Degree in Business Admin and Management, skills and experience in secretariat and Administrative duties, have worked in an Oil and Gas company, 2 Construction Companies, good mastery of Micro Soft applications, excellent in both spoken and written English, with French and an additional Language.

Western IT and data networking expertise. Enterprise and Telecom experience. PMP holder

Journeyman Industrial Electrician , Apprentice Instrumentation Mechanic / PLC , DCS, HMI, SCADA . Underground / Surface, Oil and Gas, Mining

Handle preventive maintenance for the machine , servicing machine ,replace breakdown component /or equipment.

RSLogix 5000, PLC 5, SLC (Allen Bradley) Concept (Modicon, Quantum) Unity (Modicon, Quantum, M340, etc.) Setting up and commissioning of Advantys IO systems Rockwell, RSView Wonderware, Intouch

My areas of expertise are production, short-term planning and project management. I am a troubleshooter and leader that use influence to get things done

Operation Manager, International Pipe Inspector by DS-1, (Level II UT, RT, MT & PT) - ASNT-TC-1A

MSc Engineering / Business Development / Project Management /Energy fielsd

Control Systems Engineer (Programmer & Designer)

i have three month experience in the oil field and one year experience on the mining field as a junior geologist. my duties are core logging,sampling, underground mapping and data acquisition,and Running/Monitoring (data collection) and processing of crude oil to the surface.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 [ 181 ] 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out