CONTACT INFORMATION:
View contact information...
I am an Instrumentation engineering graduate with 14 years of experience in Basic engineering, FEED, detailed engineering, construction and commissioning support fields in upstream and downstream oil and gas projects. I have worked with leading design and engineering organizations in Japan, Saudi Arabia, Qatar, UAE & India. At present I am working with TOYO Engineering Corporation, JAPAN for their El palito refinery expansion Pre-FEED & FEED Project.
My specific experience includes the following.
1. Preparation of FEED & ITB documents (Instrumentation, Telecom & F&G)
2. Review and approve engineering documents and drawings prepared by EPC contractors.
3. Design & detailed engineering for Onshore and Offshore Oil &Gas projects (ARAMCO, SHELL, QP, ADMA-OPCO, ZADCO,PDVSA & TAKREER) - Instrumentation, Telecom & Fire and Gas.
4. Design and detailed engineering for the system integration of oil and gas Projects: (DCS – ABB Bailey, Honeywell TDC-3000 & Total plant solutions, Fisher Delta V,Yokogawa Centum CS etc., MOV- Rotork & Biffi, TGS – SAAB & ENRAF, LAN, F&G – Simplex, Allen bradely, CCTV – Hernis, MCM – Bentley, IPCS – S&I)
Expertise:
1. Preparation of FEED deliverables using Smart Plant Instrumentation (Intools).
2. Foundation Field bus engineering & system philosophy design
3. Preparation of logic narratives, process and shutdown philosophy.
Upstream oil & gas experience (OFFSHORE):
Projects:
1) Al shaheen field development project – Maersk oil Qatar.
2) STP unit installation at USSC, ZWSC & ZCSC offshore platforms – ADMA OPCO - UAE.
3) Al khaleej northern area filed development project – DP4 & PP1 – Total Fina Elf Qatar – QP.
4) FPSO – BP Angola
Tenders:
1) Bunduq gas reinjection project – El Bunduq - UAE
2) ZCSC Demothballing & recommissioning project – ADMA OPCO - UAE.
3) Halul Island control room modifications project – Qatar petroleum.
4) OGD –III Upstream project - 50 new wells & 30 existing wells and manifold upgrade – ADCO.
5) Offshore gas export project – ADMA-OPCO.
Downstream oil & gas experience (ONSHORE):
Projects:
1) Elpalito refinery expansion FEED Project – PDVSA Venezuela.
2) Cilacap refinery expansion FEED Project – Petramina Indonesia.
3) OGD-III project – Condensate storage and ship loading facility – Ruwais Refinery - TAKREER
4) GTC121/ED/01 – FAHIL, DUKHAN AND ARAB D (NGL – 4) Modifications – Qatar petroleum.
5) BI-5016 – Ras Tanura refinery upgrade project – Bechtel - Saudi Aramco.
6) FEED for Shell refinery tank farm upgrade project – SHELL – Saudi Aramco.
7) BI-6050 – Juhaima Gas plant project (NGL) - JGC– Saudi Aramco.
QUALIFICATIONS:
Bachelor of Technology degree in Instrumentation Engineering –University of Kerala, INDIA.
(1994 - First class with distinction).
AFFILIATION:
- Member- Instrument Society of America (ISA).
- Member- Toast Masters International, USA.
- Member- Project management Institute (PMI) chapter.
- Registered with Saudi Aramco GES employee's roster.
TRAINING:
- SIL Assessment and SIL validation training conducted by ACM Automation –Canada.
- Value engineering workshop conducted by Zakum filed development company-ZADCO.
- In-house training for INTOOLS software.
- In-house training for QRA.
- Attended Valve engineering school conducted by Nippon fisher – Japan.
VISA STATUS:
- US Visa: Type - Visit visa R1 B1/B2, Validity 04/11/2018
- Japan Visa: Type – Work visa, Validity 04/08/2010
- Singapore visa: Type – Visit visa, validity until 2012
EXPERIENCE PROFILE:
OVERSEAS EXPERIENCE:
Presently employed in TOYO Engineering Corporation, JAPAN. TOYO - One of the leading Engineering organization in the world executing Multibillion dollar Projects around the Globe.
COMPANY: TOYO Engineering Corporation - JAPAN
PROJECTS: El Palito Refinery Pre-FEED & FEED Project –PDVSA Venezuela (JVC – Foster wheeler Italy & TOYO Japan – Licensor: Shell USA), Cilacap refinery FEED Project - Petramina Indonesia, FPSO – BP Angola
YEAR: 2007 Aug – present
POSITION: Lead Instrument & Control System Engineer
COMPANY: NPCC (Engineering Department) – UAE
PROJECTS: Al Shaheen Field development Project – FDP 2005, MAERSK OIL QATAR. Northern Area field development project –Total Fina ELF & QP, STP unit installation project-ADMA-OPCO platforms, New SPM Mooring facilities at Das Island – ADMA-OPCO,OGD III Condensate storage tanks and ship loading project – Ruwais refinery - TAKREER
YEAR: 2003 – 2007 July
POSITION: Lead Instrumentation engineer.
COMPANY: Bechtel Overseas Limited – Kentz Engineering Intl.Ltd – JGC Arabia, KSA
PROJECTS: BI-5016 -Rastanura refinery upgrade project (ARAMCO- SAUDI ARABIA).BI-6050 -Juhaima gas plant (NGL) project, BI-8258 -Shedgum GOSP 3&4 Upgrade project, RT Refinery Oil filled switch replacement project, (ARAMCO – SAUDI ARABIA), Saudi Aramco shell refinery improvement project. Fahil south and North, Dukhan, Arab D (NGL-4) Gas recycling plant modifications – QP – QATAR, Halul Island Control system upgrade project (On Deputation).
YEAR: 1996 – 2003.
POSITION: Senior Instrumentation engineer.
EXPERIENCE IN INDIA:
COMPANY: Fact engineering and design organisation (FEDO)
YEAR: 1994 - 1996
POSITION: Instrumentation Design engineer.
PERSONAL
NATIONALITY: Indian
DATE OF BIRTH: 03/05/1972
TOTAL YEARS OF EXPERIENCE: 14 YEARS.
PASSPORT No: Z1875335, Issued at Tokyo, JAPAN
Summary of Major Duties & Responsibilities:
Prepare conceptual designs, preliminary designs, FEED and detailed designs for oil & gas plant projects – Instrumentation, Telecom & Fire and gas.
Prepare equipment and material specifications, data sheets, develop FEED & detailed engineering calculations and drawings including the preparation of the design basis document, Bill of Quantities, Block Diagrams, Equipment system specifications, cable routing, control room layouts, Cause and Effect diagrams, Loop Diagrams, Functional Logic Diagrams, Control philosophy, APC specification, OTS specification etc.
Familiar with all relevant international and company standards (ARAMCO,SHELL DEP,QP,ADMA-OPCO,TAKREER DGS,PDVSA,ISA,ISO,API,NFPA,IEC,NEC,BS, IP, IEE, CENELEC, FM) and company codes of practice.
Planning and coordination of all Project activities and checking its technical documents and deliverables during its Pre-FEED, FEED & EPC stages to ensure that works are implemented to the specified technical requirements, within the required schedule and as per international standards and company codes of practice.
Review contract requirements for project execution, organize the preparation of the Technical Document Register (TDR), identify requirements and scope of work; review specifications, Process Data Sheets (PDS), Piping Material Specifications (PMS), Piping & Instrumentation Diagrams (P&ID's), Plot plans, General Arrangement (GA) drawings, Review Philosophies, Area Classification Drawings, Fire and Gas Detector Layout Drawings and other relevant documents. Establish contract review criteria, identify and resolve discrepancies and divergences from original proposal through the instigation of technical queries to projects/client.
Carry out/ Coordinate Technical Bid Clarifications, evaluation of bids and submit recommendation. Review and approve contractor's submission for method statements and material approval. Conduct frequent construction site visits to monitor method of execution and progress of project works.
Supervise and/or coordinate construction activities during construction phase and ensure successful completion by the EPC contractor. Review HOT change over method statements of the control systems; supervise HOT changeover activities during construction phase.
Participation with contribution during P&ID reviews, shop and field testing of control systems. Active participation in Project safety review, such as HAZOP(s), SIL, PHSER reviews, Task Risk Assessments, etc.
Operate as part of a team of engineers and designers in carrying out design and detailed engineering works and provide necessary technical information for procurement in compliance with tender specifications/data sheets and within budgeted man-hour and project schedule.
Prepare technical inquiry requests (Inquiry Requisitions) to vendors, participate in the technical evaluation of vendor bid offers. Direct and provide guidance in the Technical Bid Evaluations (TBE), review vendor drawings and documents. Supervise the review of design calculations, ensure vendor equipment specifications meet with client equipment specifications and are within budgeted costs.
Meet with vendor representatives, inspect vendor works and workshops when required, provide dispatch clearance and test certificates. Attend FAT. Participate in Material Take Off (MTO) activities, identify irregularities and shortfalls, take corrective action when required.
Provide technical support to Projects on design matters during detailed engineering, procurement, installation and commissioning stages of projects, which often involves site visits. Reviews and comments on pre-commissioning, commissioning and start-up.
COMPUTER PROFICIENCY:
Software packages: INTOOLS Software package, Instru calc and SIL CORE Software.
Application Software: PRIMAVERA planning software, Auto cad 2000 and MS Office programs.
REFERENCE:
Will be provided
View contact information... |