Resume - I have been described in previous positions as hard working; honest; reliable; a...

Misco Jobs

Resume #80846

CONTACT INFORMATION:
View contact information...

Employer: Halliburton Energy Services (Kazakhstan)

Date: 1st November 06______ Present

Position: Service Team Leader

Duties: Carry out & oversee that all preparation & maintenance of cementing equipment & down hole tools are properly prepared for all upcoming jobs: That all paperwork is carried out efficiently & reports of all records are kept. Maintain contact with Co Reps
Advise operators & trainees with there on site cementing training, assist them with their calculations

Employer: Addax/ Genel Energi

Date: 8th April 06 13th August 06

Position: Cementing Engineer Consultant

Duties: New start up project in the TAQ TAQ field Kurdistan (Iraq) using BJ cement equipment and downhole tools used in all cementing and remedial operations, Planning and implementation of site equipment for successful operations Ordering of chemicals and setting up maintenance schedules of all cementing equipment and proper functioning of all equipment

Employer: Halliburton Energy Services, Denmark

Date: 1st November 05___ 30th March 06

Position: Senior Service Supervisor III

Duties: Cementing and tool operations for Maersk Olie & Gas onboard Rowan Gorilla 7 Jackup operation of Halliburton down hole tools and maintaining & operating
Dowell cementing unit (Slurry Chief) with CEMCAT

Employer: Halliburton Energy Services, Saudi Arabia

Date: 1st January 2002___26th October 2005

Position: Senior Service Supervisor II

Duties: Supervise & implement-cementing operations in Saudi Arabia performed by Saudi
Nationals and multi national operators/the running and operation of
All cementing down hole tools i.e. (ESICP, MISCP, MCCP) DV Tools
Both onshore and offshore
Operating RTTS, EZSV, SSCV, CHAMP PACKERS, and other associated special
Down hole tools for offshore and onshore operations.

Position: Unemployed:

Duties: Seeking employment:

Date: August 1999 - January 2002

(Seasonal Painting and Decorating for local contractor)

Employer: MC2: Stirling University Business Compound

Date: May 1999 - July 199

Duties: Cold call business's, on behalf of Edinburgh local authority, for their year 2000
With regards to computer systems and ensuring they were Y2K compliant. Present to
Them, local authority compliance schedule & to forward reports of, these meetings.

Employer: Halliburton Energy Services, Nigeria

Date: April 1995___30th April 1999

Position: Tools man/Trainee Drill Stem Test Operator/Cementer supervisor

Duties: Multi skilled, including down hole tools operation and repairs, onsite & in workshop
Liase between oil company field managers. Maintaining ongoing well programs
Distribution and planning of equipment and spares for customers well sites.
Liase and dealing with problems with local village chiefs and their elders.

Employer: Halliburton Energy Services, India

Date: August 1993-April 1995

Position: Cementing /Supervisor

Duties: Implementing training to trainee Indian national engineers on all aspects of cementing
Techniques used in oil well applications Operating & maintenance of all cementing equipment. Present schematics & calculations for upcoming jobs.

Employer: Halliburton Energy Services, Aberdeen

Dates: January 1991 - August 1993

Position: Cementing Engineer

Duties: Carry out all cementing and down-hole tool operations for oil well companies,
On jackups, semi's & platforms (offshore) EZSV:RTTS:SSCV:Champ Packers and
RBP

Employer: BION Industrial Painting

Dates: May 1990 - December 1990

Position: Painter

Duties: Spraying & brush-roller painting on offshore platforms to customer
Specifications & safety guidelines.

Employer: Self employed

Dates: November 1986 - May 1990

Position Painter & Decorator

Duties: Pricing of work on hand, carrying out painting & decorating services.

Employer: Halliburton Energy Services, Aberdeen

Dates: November 1985 _ November 1986

Position: Cementing Engineer

Duties: Workshop foreman, Forwarding & receiving of offshore equipment
Repairing and upkeep of records. Offshore cementing Running EZSV, RTTS, and
RBP.

Employer: Halliburton Mfr Services, Libya

Dates: June 1980 - November 1985

Position: HGV 1 Driver/ Engineer in Training

Duties: Transporting cement & pump trucks across the Libyan Desert to customers
Rig locations. Lay, out equipment, for cement jobs, carry out cement job
Run down hole tools (RTTS, EZSV& Float Equipment cementing)

Employer: HM Forces - British Army

Dates: June 1965 - January 1980

Position: L/Cpl - HGV 1 Tank Transporting

Duties: Loading & unloading of tanks. Maintenance and servicing of tractor units
And trailers and transporting tanks to designated locations.

TRAINING

Training Body: Halliburton, Dallas, Texas, USA

Dates: October 1997 Duration of course: 5 Days

Course: Special tools 2: Hydraulic Calculations for oilfield tools.

Training Body: Computeach, home study course

Dates: January 1988 - January 1989

Details: 1Year home study course achieving basic computer programming skills.

Diploma number: 8872428

Training Body: Halliburton Cementing School, Gt.Yarmouth, England

Courses: Preventative Maintenance Dates: 6th - 17th December 1982

Basic Cement Dates: 25th April - 6th May 1983

Advance Cementing Dates: 12th - 23rd September 1983

Training Body: HM Forces - British Army

Achievements: Mechanical Certificates, A1- A2, A3, B1, B2, B3.
JMQC (6 Exams)

Dates: Varied: 1965 – 1980

Survival Courses: RGIT Basic Offshore Safety Induction & Emergency Training
Validity: 08/11/09 (Including HUET & EBS)
(OPITO Approved & NOGEPA Standards) 07/11/05 to 11/11/05

European Module Including Norwegian Induction
(OLF Approved) 07/11/05 to 11/11/05

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1201 to 1250 of 10917)

Go to Search Parameters...

Brief Description

Good knowledge in delivering commercial operational management including specialist area of hydrocarbon business and regulatory compliance and administration (Production Sharing Contract, Joint Operating Agreement and Gas Sales Purchase Agreement, fiscal terms)

QA Manager with 23+ years diverse experience

All STCW certificates are valid and available

Water-flooding, reserve estimation, production forecasting, economic & risk analyses, reservoir characterization, tracer & pressure transient analyses. Well surveillance for development opportunities. Some thermal experience. Simulation experience to predict performance & optimize development plans.

Application For Mechanical Inspector/Engineer

Having 14 plus years experience in EPC projects in the area of Construction, Process and Equipments, Installation, Commissioning, Preliminary & Detail engineering & Project Management system, in Oil & Gas, Petrochemical, Chemicals sectors, etc.

Having 20 years of professional experience in various aspects of Detailed Engineering, Pre-bid engineering and Construction supervision & commissioning activities related to Control & Instrumentation (C&I) System for Oil & gas, Refinery, LNG & Petrochemical and power plants.

Petroleum Engineer with 13 years experience in the Oil and Gas Industry with solid knowledge in Geopressure analysis, Well design, MWD operations and rock properties analysis; project management skill (estimating/cost, control/scheduling); bilingual Spanish-English; APEGGA EIT# 92804 and Worldwide.

To obtain a position as Suitable position in process control Instrumentation that allows me to expand my current skill set with technical challenges and career development opportunities to enhance the achievement of corporate goals.

Highly Qualified Draughtsman

Science bachelor degree & safety management diploma and HSE Supervisor Technician with 13 years of experience, Worked for drilling operation, Production operation on offshore and onshore as a HSE technician, advisor and supervisor. Drilling experience as well as driller hand ,Experience managing

A competent & self motivated professional with the ability to work independently and as part of a team within a highly pressured, fast moving environment with 10 years of qualitative and enriching experience in the field of Logistics, Supply Chain, Freight Forwarding, & Operations

An astute, detail-oriented professional who excels under the pressure of time constraints and possesses the determination to always exceed expectations.   Summary of selected Accomplishments responsible for career total of more than 500 placements!

Rock physics, Petrophysics, Quantitative seismic Interpretation, AVO, reservoir modeling, generation of synthetic seismograms

Total Of 16 Years Experience In Drafting And Detailing Of Piping Drawings And Other Drawings In Compliance With The International Standards. Experience Achieved Is In Line Of The Chemical / Petrochemical / Refinery And Connected Utilities Piping Jobs.

Seeking employment as Telecom Engineer in a competitive environment for a position offering challenge, diversity and opportunity for professional advancement, having strong learning aptitude along with analytical and interpersonal skills.

OBJECTIVE: To obtain contract or full time position as a Document Control or Records Administrator and/or other related job.

PDMS mid-level piping designer with a specialty in PDMS DRAFT, Misc. pipe supports, equipment modeling and sloped pipe.

Production/drilling engineer hold Master from IFP; working in Workover operation

Free! Worked as a Drilling Fluids Engineer / Technical Service Coordinator for the past 13 years.

Installation, commissioning, testing & operation of transformers, Power Control Centre, Machine Control Centre Panels

M.Sc with 15 years Laboratory experience in Analytical Lab.

Chief engineer, marine with 14 yrs. of sailing exp.hands on exp. in maintenance of diesel engines,power plants,air conditioining,pumps and turbines.etc.

I am a consultant working for Devon Energy in the Ft. Worth area and have worked for several major oil companies doing directional wells and taking them from start to finish, building locations and put them on production.

Over 30 years as supervisor.

Electrical Engineer

Piping Engineer (PDMS)

PDMS AUtocad 3d Multisteel Civil/Structural Design Draughtsman

I have been described in previous positions as hard working; honest; reliable; a team player and a good communicator. It has been said that I excel in new challenges and I have an excellent work record.I am at present available to take up any position within the cementing or tools in a supervisory

Preparation of FEED & ITB documents (Instrumentation, Telecom & F&G)

Able to plan, organize, and implement complex design projects within prescribed time and budget. Field experience and Construction Representative on major projects. Worked and knowledge of ASME B31.3, API, and ASTM.

Well Test Engineer HP/HT

Industrial Electrician

Piping design and checking:Cadworx, Bentley 3D, Autoplant

Piping Designer - Mechanical / Piping.

Pipefitter Welder/Maintenance Supervisor 20+ years of experience in this field of work. I have had firefighting training as well as inspection training.

I have been in the oil & gas industry for 34 years in working in differenece fields.

I am capable, professional and organized. 19 years service in the engine room on ocean going vessels, including 14 years sailing as Chief Engineer has afforded me the experience and tools to excell in this position.

G&G and engineering data management, MS-Office applications; petroleum software and databases, industry regulations, regulatory form preparations etc.

A result oriented professional with over thirty broad-based years of international experience in the drilling and workover industry. Major strengths in team building, planning, contractual verification, rig design and operational supervision.

I'm a skilled Well Engineer with a wide experience in well construction, stimulations, completions, and workovers. Strong team management and communicational skill with experience to manage the complete well engineering process from well design to drilling execution of exploration projects.

I have had twenty years experience in the Petroleum Industry ranging from Drilling, Production, Completion, and Work-over engineering in all types and configurations of wells and drilling units/production platforms both onshore as well as offshore. I have worked in Canada, Saudi Arabia and Thailand.

CFO & Treasurer - publicly traded oil & gas & mining company

20+ years in offshore engineering; including marine, structural, pipeline, and project engineering

About 25 years of Process Engineering experience including fifteen years with EPC companies in the Arabian Gulf states in the Oil & Gas industry.

An innovative and seasoned Marketing professional with expertise in consultative sales and marketing, strategic planning, brand management, market research, sourcing, procurement, supply chain and logistics, and with 20 years of successful progressive experience in all phases of market consulting.

Project management. Construction management.

Dear Sir, I have 21 yrs Exp in a petroleum laboratory as a Sr lab Chemist having knowledge of testing all petroleum products, petrochemicals based on ASTM/IP/BIS methods, handling auto instruments aware about fire and safety rules and regulations.

Sr. Rotating Equipment Engineer with 20years experience in Turbo-compressors up to 42 MW rating of Refinery, Petrochemicals & Ammonia Plants. In depth experience in troubleshooting, maintenance/major overhauling/modifications, failure analysis, condition monitoring and vibration analysis

Backround in Electrical Engineering/Design with emphasis of Project Management, Production/Manufacturing with more than 15 years experience in Electrical Design/Construction work and familiar with Standards Procedures as well as with the Industry standards such as ANSI, API, NEC, etc

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 [ 25 ] 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out