Resume - Responsible for on and offshore site planing for well testing operations job log...

Misco Jobs

Resume #80864

CONTACT INFORMATION:
View contact information...

SCHLUMBERGER MEA Saudi Arabia
Well Test Supervisor From 1996 to To 2004
Job Description: Working alongside Aramco oil company engineers in testing oil and gas wells, for flow rates product quality make up and reporting on finding/results to Aramco main office, This process involved Running the test from the planning stage to commissioning plant all calibration, PVT sampling. The completion of all the reports & job tickets. Supervising the whole Schlumberger crew. Making sure all Heath and safety procedures are in place and all issues were dealt with promptly. Making out a maintenance plan for equipment Separators, Hydro-cycling separators, Pumps, Heaters etc and carrying out instrumentation calibration. Working on own initiative due to very little back up due to remote locations.
Courses taken:
Advance well testing, Stan surface accusation system, BHP gauges, Data latch and Offshore Safety Expiry date 26 March 2006.

BAKER OIL TOOLS Syria
Well test supervisor 1993 to 1996
Duties included setting up and running of Early production facilities, which involved gathering well fluid from numerous wells, Breaking the components down into gas, water and oil. Then pumping the oil to main gathering station. Also general testing of oil and gas wells and reporting findings.

OCEANEERING Scotland
Company Man 1995 to 1995
During a leave from Baker worked in the North sea on a pilot project for Texaco to determine if the Captain field was a viable future production field.

OCEANEERING Gabon Africa
Process Operator 1992 to 1993
Working on a production tanker for Oceaneering. This involved the direct flow of well fluids from two unmanned platforms to the tanker via process units and consisting of first stage and second stage separators, hydrocycling water knock out systems, electrostatic desalters and pneumatic shutdown systems.

GEOSERVICES Tunisia
Production Supervisor 1991 to 1992
Onshore and Offshore well testing in Tunisia.

OILFIELD PROUCTION SUPPORT China
Process Operator 1990 to 1991
Working on a new production project in the South China Sea for Occidental.

This involved the direct flow of well fluids to an oil tanker via a process unit and included the use of an electrostatic desalter and all alarm and safety shut down systems.

ERC TESTING AND PRODUCTION SERVICES England
Well Testing and Production Supervisor 1987 to 1990
Running production tests and working in production stations all over England, Scotland and Europe.

BAKER PRODUCTION SERVICES Oman
Shift Supervisor 1984 to 1987
It was my responsibility to run the night shift of a production facility in Oman for Occidental. I was responsible for supervising and carrying out all maintenance and also calibration of heaters and separator equipment. I was also responsible for preparing and faxing the daily reports and calculations to Occidenal USA and also well tests on well sites.

BAKER PRODUCTION SERVICES Abu Dhabi
Well test operator 1980 to 1984
Joined Baker originally as a trainee and attended the Baker Training school in Houston, Texas where I attained 86% in my final examination. On completion of my training I worked offshore throughout the Arabian Gulf both as assistant operator and then an operator. My main duties included separator and instrumentation calibration sampling Amaradas, bottom hole sampling and all reporting procedures.

EMIRATES ARAB ENGINEERS [ PLESSY] Abu Dhabi
Apprentice 1979 to 1980
Apprenticeship in offshore radio communications. Dealing with the maintenance of SSB and VHS radios on offshore oil platforms including some work on radar.

Education

Building services training:
City & Guilds Plumbing Certifications South Wales

Gelderston Hall Norfolk, UK
Qualification Level: GCE 'O' Levels: Maths, Metal work & Technical Drawing 1977-1979

Pembroke School High Wycombe, Bucks
1974 -1977

Carrington Juniors School High Wycombe, Bucks
1972-1974

Zambia Boys School Lusaka, Zambia
1967 - 1972

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5801 to 5850 of 10816)

Go to Search Parameters...

Brief Description

Mechanical Design Engineer for Oil and Gas with 10 yrs exp. for EPC companies

Paint Inspector/Supervisor

Electrical and instrument project manager construction, design and inspection

Open Hole LWD Logging and log analysis, M.Tech (Applied Geology)

Overhauling of Rotating equipments e.g pumps, compressors, gas turbines etc. in an oilfield

Presently working with ConocoPhillips Syria Dez.Gas Ltd. since April 2002 as a Senior Warehouse & Procurement Supervisor in Syria (Middle East) on 28 Days ON/OFF schedules through GMOS (MSI). Job Profile: Responsible overall for all aspects of materials including warehousing, procurement operations

Working In the Oil and Gas Drilling Industry Since 1986 Looking for a company that wants its employers to look after it !!

Rotating Equipment Mechanical Engineer

Senior Geologist (16+ years oil and gas experience), graduated in geology from University of Kansas in 1987.

Having 15 years of experience in oil and gas construction and maintenance feild, with Diploma in Industrial safety, Environmental management

Power Plant Operator Gas Turbine Steam Turbine Supervior Operations GE HRSG

Education: Bachelor Degree in Economics

Piping stress analysis usisng CAESAR-II, support engineering, pipe thickness calculation, pressure balance in PIPENET software, etc

Analytical Thinking , Technically Sound, Good Negotiator, Innovative

10 years of experience as chemist with exposure to most modern methods of analysis

chemist, corrosion eng, oil and gas fields

To obtain a Technician, Operator, or Specialist Position.

Over 16 years of total experience in the industry of which 8 year’s industrial experience as Chemical Engineer. This is backed by 8 years of experience of implementation of Intergraph’s Plant Design System (PDS) software. The domain of PDS expertise comprises of piping and structural modeling, extra

Design/Detail engineering, inspection , erection & commissioning of Oil & Gas Plant,Agro-Chemical industry, Refinery, Pharmaceutical industry involving PLC & DCS system, fire alarm system, access control system, CCTV system ,Public address system, local control panel & field instruments like pH met

6+ years of experience in Reservoir Engineering and Oil Industry.

Experienced Civil / Structural Engineer

Responsible for on and offshore site planing for well testing operations job logistics and personnel movements. Working in a wide range of environments and positions around the world. Responsible for the safety of the crew, the accurate reporting of operations and morning reports, preparing the corr

Over 20 years experience

Wireline Operator/Supervisor

I have 18 years experience in the Oil Service Industry, involved in all aspects of Coiled Tubing, Nitrogen Services, Fluid Pumping, N2/He Leaktesting(HLD), Pipeline Pigging/Testing & Well Testing. My last permanent position was Service Supervisor II for Halliburton Coiled Tubing in Australia. Since

25+ years experience

20+ years oilfield experience, excellent work ethic - personal skills - time management, own truck with commercial insurance and plates, current tickets

Inspection Coordinator / Welding Inspector

Technical skilled person for supervising piping /construction projects

A state Engineer in refining

30 years experience in the pipeline field, which includes- bidding jobs, safety procedures, quality control, facility installation, environmental knowledge, welding procedures, know procedures for filling out ground disturbance, hot and cold safe work agreements and confined space entries

I am a mig welder that is a harder worker that is willing t o learned new skills to become a better overall welder.

I have a degree in bachalor of engineering, in mechanical engineering discipline. i will be able to perform effectively if i am being taken

NDT Level II - UT / RT / MPT & LPT - Sr. NDT Tech.

Experienced Opito Level 3 offshore rigger with additional safety and working at height training.

Construction Manager with 22-years experience in Mechanical Construction discipline for Industrial Projects (Oil & Gas, Refineries, Petrochemical Project and Power Plant Projects).

I hold a BSc in Engineering and have extensive experience in procurement and contracts activities in the upstream oil and gas projects. I seek an employment in the Middle East region as Senior Procurement /Contracts Engineer.

Engineering manager, Planning, Contracts and administration. Production engineering a specialty.

Experiance in Detailed engineering, System Engineeering (PLC ,SCADA,DCS) FEED study, instrument selection, BOM preperation, Hotcutover, start up and commissioning, engineering and feild engineering

PDS Modelling, Microstation & ACAD 3d Modelling

Bachelor’s degree in Mechanical Engineering passed from N.E.D. University of Engineering and Technology Karachi in the year 1998

5 yrs extensive training and experience in PDS-EERaceway and Microstation, 8 yrs in Autocad

With 5 yrs experience, Chevron Indonesia, as a Petroleum/Reservoir Engineer. Activities include EOR optimization, reserves estimation, depletion plan, project management, reservoir surveillance, workovers, drilling programs, and artificial lift optimization.

M.S in petroleum geology and petroleum engineering. years working experience in reservoir characterization, formatioin evaluation in industry. knowledge in reservoir simulation, prduction and drilling engineering.

Power Station Chemist in the Philippines with experience in power plant desalination and ultrapure water treatment, corrosion issues, water/steam purity control, fuel gas and oil chemistry and engineering projects related to power plant chemistry.

engineer with excellent telecommunication knowledge

I have been involved in Health, Safety and Environment in excess of 25 years and I am an experienced and qualified Health and Safety Professional in a Construction, Oil /Gas, Drilling Off-shore and On, Aviation and Petrochemical environment. This has enabled me to undertake the following:

Chemical Engineer

29 years of Intergraph/Microstation, 9 years of AutoCad, 8 years of civil roadway design ,5 years InRoads, 4 years GeoPak, 3 years PDS/Frameworks, 2 years Bentley Structural TriForma

Aircraft maintenance engineer with turbine experience. AC/DC, hydraulics, pneumatics troubleshooting and maintenance. Vibration diagnostics and diagnostic software.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 [ 117 ] 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out