Resume - drilling supervisor experience in drilling operation 24 years, HP/HT 5500m/1000...

Misco Jobs

Resume #80882

CONTACT INFORMATION:
View contact information...

Experience Background:
* 1984: I worked in the Rig as Drilling Engineer for one year after tool pusher, in the different Rig (Oil Well 2000, Oil Well 840E, National, Cabot 1200, and Cabot750) and I had experience for management (Personnel) and equipment Rig, Moving Rig down and Rig Up Rig;
* I have good experience for the equipment of different Mud pump (oil well, Gardner Denver), BOP (Hydril, Cameron, Shaffer), Well Head FMC, Cameron, WKM, Stream Flow) for different size and pressure 2000, 5000 and 10000psi. good experience on Koomey and BOP equipment well control;
* In 1987: I joint Sonatrach to work as Drilling Supervisor (company man);
* I have good experience for drilling phase from 36'', 17 ½'', 16'', 12 1/4``, 8 ½``, 6`` and 3 ¾" Hole', and cementing casing from 30'', 20''ou 18''5/8, 13''3/8, 9''5/8, 7'', Liner 7'' and 4''1/2;
* Cementing casing With DV and ACP with slurry, cementing to occur losses formation, cementing with Foam cement, Lite create and Heavy slurry, good experience for cementing Gas Well;
* I worked and lead several critical situations: well kicks, drilling deep wells until 5400m, drilling abnormal (HP/HT) wells deviated wells, and many others critical situations as blow out from the casing head; Good practice Driller's method, weight and weight and Bulheading
* Good experience on running liners mechanical and Hydraulic, on fishing equipments and covered operation, many jobs to recovered fish (recovered string in stuck pipe, recovered and milling equipments;
* I have good skill, knowledge and experience to design well programs, cement &fluids programs & select bit in drilling program and well recaps
* Drilling soft and medium formation with PDC bits and tricone application wit mud motor High and Low speed, Hard and abrasive formation with Impregnate bit application with turbine
* Good experience for Oil Base Mud & Water base mud & Foam drilling and UBD, and cure losses w/LCM and Cement Plug, flow check for vertical and horizontal well, Foam cementing.
* A good knowledge and experience in drilling Gas Well, for the problem of the channelling in the cementing and control well for kick, I drill some wells with pressure reservoir 7000psi and use BOP 10 000psi.
* Good experience for the safety Rig and good experience with drilling software Landmark (DIMS, EDM, COMPASS, Well Plan, Stress Check, and hydraulic programme)
* Drilling steam well new technology, application cure losses in south Oman with flo Check and
GRE pipe, completion with gravel pack and Foam Cement, MSIPC and ACP;
* Good Experience for Completion and stimulation wells, acid pickling and acid job

Fields Operation:
1984- August 2006 Experience in Algeria DSV, Drilling Superintendent and
Drilling Engineer
* 1984 – 1985: Drilling Engineer in Rig site Contractor Sonatrach-ENTP Algeria
* 1986 – 1987: Tool Pusher Contractor in land Rig Sonatrach-ENTP Algeria
* 1987 – 1994: Drilling Supervisor in Exploration and Development On Shore with Operator SONATRACH
* 1994 – 1997: Drilling Supervisor and Drilling Engineer With AGIP AFRICA ALGERIA
* 1997 – 2003: Drilling Superintendent with Operator SONATRACH, Mange 7 Rigs in Development Gas and 4 Rigs in Exploration

* 2003 – August 2006: Senior Drilling engineer in Project wells exploration and horizontal well in Hassi Messaoud Oil Field and Hassi R'Mel + In Salah Gaz Field & in charged of drilling programs and Design well and Equipment for all wells drilled.

* Good experience in different Field in Algeria (Hassi-Meassoud, Rourde El baghel- Messdar- Hassi Guetara – Hassi Rmel – In salah – adrar – In amenas –Stah- el Borma – Berkine – El golea – Gassi Touil)

August 2006 – January 2007: Experience In Saudia Arabia ; DSV with Aramco Drilling Supervisor with Armco in Oil Division south area contract with Chemmech Coastline as consultant
* (Drilling Horizontal well field Othmania, Harad and achieve good performance with ADC15 and 10 )

January 2007 to April 2009 drilling supervisor DSV in PDO /Shell Oman
* Drilling steam well new technology, application cure losses in south Oman with flo Chek and GRE pipe, completion with gravel pack and Foam Cement, MSIPC and ACP)
* Drilling Vertical and Horizontal wells, shallow and deeper wells, undercut well
* Good experience in different Field in Oman:
South Oman: Marmul, Quaharir, Bahja, Thayfut, Saddad, Runib
North Oman: Kauther, Quarn el Alam, Lakhwer, Mabrouk, Yibal, Bourhan

Education and training
High School Petroleum University Boumerdes
Duration of formation 05 years (1980 – 1984)
Diploma Drilling Engineer

* 3 months 1991 Drilling Supervision ENSPM/PAU/France Training Drilling, Fishing, horizontal, cementing Casing, Liner & Rig (AC-DC and DC/DC)
* well control 1991 ENSPM/PAU/France Level supervisor
* Technology of different BOP from 2000 to 15000psi BOP Cameron, Bezier France 1991 one week
* OBM & WBM Technology 1991 BHI Pau France, oil base mud & water base mud polymer
* Advanced Technology courses 1994 Baker Oil Tools /HOUSTON / USA Equipment RBP, Bridge plug, Liner
* Training Drilling Supervision 1992-1994 TOTAL TTI Hassi messaoud Algeria
* Power Tong for drilling & Completion1997 Weatherford Hanover Germany and Foam Drilling
* Cement Techno & Equipment 2000 Halliburton, Duncun Oklahoma USA Cementing & completion horizontal Well
* IWCF 2000/2002 Sonatrach Algeria Level supervisor
* SONATRACH/ C.P.E (Company Perfection Center), management & performance" sept-2000
* Software Drilling Landmark: DIMS, Well Plan, Compass, Data Analyser 2001 Algeria
* Software MICROSOFT Excel, Word, Power Point 2001 Algeria
* Well design from 36'' to 6'' open hole 2002 Sonatrach Algeria
* BOOTS & COOTS Hassi Messaoud Algeria Advanced well control –July-2005
* IWCF (International well control forum) 2002/2004 Algeria Level supervisor
* IWCF (International well control forum) 2004/2006 Algeria Level supervisor
* IWCF (International well control forum) 2006/2008 Algeria Level supervisor
* Bits from Hughes, Smith, Hycalog, Reed, DBS
* H2S June 2006 Dahran KSA Aramco Saudia
* Beyond Safety Marsh 2008 Muscat Oman IPM Schlumberger
* Advanced Safety leader ship October 2008 Muscat Oman Cardenwell Training Ltd
* Spirit Safety July 2008 Muscat Oman PDO Oman
* H2S January 2007 Muscat Oman NTI Oman
* defensive driving January 2007 Muscat Oman NTI MUSCAT
* defensive driving January 2008 Muscat Oman NTI MUSCAT
* IWCF (International well control forum) 2008/2010 PDO Oman Level supervisor
* Training HSE/PDO: Permit to work, Gas tester,Initil Fire response,Job Hazard Analysis, Incident indentification NTI MUSCAT

Languages
* Arabic: Mother
* French: Fluently
* English: Good
Computer skills.
* Microsoft Office (Word, Excel, PowerPoint and Outlook)
* Landmark, DIMS,SAP,EDM

Career Objectives
 To provide quality well engineering services in a dynamic organization which offers challenges, motivation and opportunities for team work and career development.
 Plan and design the drilling programs to meet the objectives and then coordinate the execution of well construction activities with my rig team. Communicate as well with the asset team mainly and different service providers to complete the tasks and meet the targets under best of cost, safety and quality.
 First person in charge near the contractor to reduce environmental impact.
 Manage the HSE performance of my unit.
 Manage some HSE issues like incident investigations, following up HSE action points from external audits to get them closed and getting involved in unit inspection.
 Manage all contractual issues related to drilling contractor & oil services companies
 Coached young engineers and DSL's.
 Animate every day the morning meeting and participate at every Pre Job Safety Meeting.
 Anticipate commanding all equipments of drilling and completion in advance to avoid waste of time.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 10902)

Go to Search Parameters...

Brief Description

Highly motivated and experienced Maintenance Supervisor.

Graduate Electrical Engineer with over twenty-seven (27) years of hands on diversified oil field experience in Engineering / Projects / Maintenance / Risk - Reliability assessment /& Planning - CMMS,

Sr. piping designer

I am a Senior Instrument engineer with over twenty years’ experiences in engineering design, construction, commissioning and plant maintenance.

Providing structural, stratigraphic interpretation and characterization reservoir analysis services for

I am currently a Senior Technical Analysts iSeries, also as Data Base Administrator. I’m IBM Certified Specialist - System i Technical Solutions - Implementation (including i5/OS V5R4). Over 20 years of experience.

I have experienced as an Exploration Geologist from 1984-1992 and as a Wellsite / Operation Geologist from 1992- nowdays .

I have experience in finance & accounting +/- 20 years at many type of business for Indonesian company and MNC

Progressing from general operator to senior operator panel operator senior technician to production shift supervisor to production supervisor.

Project Engineering Consultant providing twenty years of engineering and project management experience currently executing subsea controls systems projects for oil and gas equipment manufacturers.

I have over 30 years in project controls, cost engineering area, split between Upstream and Downstream, Government areas.

39 years of injection molding experience

B.Sc. & M.Sc, 18 years in oil industry as geophysicist, reservoir geophysicst, surveyor. Marine and land field experience, seismic processing and QC. Project management, personnel management. Technical sales and marketing. Worldwide including USA, Africa, Europe, Middle East, UKCS

M.E. + 18 years of experience + AWS CWI + NACE CIP -1 + API 510, 570 & 653 + ISO 9001 & OSHA 18001 Lead Auditor Training Courses

Experienced in multidiscipline project engineering.

Senior Mechanical Equipment Engineer, 23 years in LNG, Oil, Gas and Petrochemical with Project Management, Commissioning and Maintenance/Reliability background for heavy gas turbines, compressors, turboexpanders as well as all associated mechanical, instruments,electrical equipment and safety system

I am a graduated, experienced, professional marine engineer. 29 plus years of valuable engineering hands-on experience in the Maritime and Offshore Industry.

I have 12 years experience as Civil/Structural designer and my task includes producing structural design dwg with connection details and 3d models. 7 years is in switchgear manufacturing where i was doing fabrication dwg of metal sheet and mounting base of switchgear & sub-station.

Very high administrative, Organizational and Negotiating Skills, B.Sc Business Administration, PGD Business Studies

Sr.Instrumentation Er. Associated with Oil & Gas Operating Company and EPC Contractors/Consultants for 25 years in different positions as Design Engineer for various Conceptual, Front End Design & Engineering and EPC Projects. Worked in multi-engineering disciplines.

Provided leadership and direction to many FEED and EPCm Contracts worldwide. Acquired valuable experience in asset assurance management and team building (people management).

Drilling Supervisor with directional, horizontal experience .

Wellsite Completions Consultant

drilling supervisor experience in drilling operation 24 years, HP/HT 5500m/10000psi, Wells Vertical and horizonatl wells, and UBD

Petroleum Engineer with extensive experience as an engineer and manager of oil and gas operations in deep water, continental shelf and land exploration and production. Experience is both foreign and domestic with E&P companies and drilling contractor. Skilled and practical on site and office superv

Accomplished senior technical geophysicist with 20 years of demonstrated success finding oil and gas through exploration and development drilling in Western Canada and Frontier areas.

electrical engineer Conceptual and detail Engineering, Prepare scoping study, conceptual study, FEED, detailed design, calculations, electrical bid documents, preparing material requisitions (MRs)

I have more than 12 years of experience in cost engineering and estimating activities for the oil and gas, power and manufacturing industries both local and overseas projects in the Middle East, North Africa and Asia. Familiar with engineering, procurement, construction and start-up processes and ma

Microsoft Windows, Office and Project Pipephase, Hysys and Profacin SAP R/3

Completion Tools Specialist, Downhole Tools Specialist, Cementing Supervisor, CTU Tools Specialsit

Twenty (20) years in Oil and Gas Industry. Working primarily at wellsite offshore and onshore, involved in exploration and development wells. Drilling Vertical and Deviated including Horizontal and Extended Reach Wells. Working onshore and offshore, Jackup and Tender assisted drilling rigs

Skills: Excellent communicator•In depth experience in drilling and workover in Romania and Libya; Highly motivated;•Expert skills in foreign languages: French, English;

Construction- and Project management, Engineering and Supervision of mechanical, piping and welding works, e.g. for oil and gas pipelines, pig-, pump/ compressor and metering stations, industrial plants, storage-tanks, structural steel, filling stations, town-gas and water distribution systems, work

Reservoir Simulation (Petre and Eclipse)

A highly qualified Mechanical Engineer with an extensive experience in developing design basis, specifications, data sheets, technical bid evaluation and vendor data review of various mechanical equipment packages for oil & gas projects

10 years in Analytical Instrumentation & 10 years in Process Instrumentation of highly skilled experience gained here and the Middle East. Adept at providing analytical and technical equipment support through troubleshooting, repairing, maintaining, calibrating, adjusting, and installing industrial

Extensive general geophysical experience, last number of years in airborne geophysics. Experienced in Africa operations.

I seek a position as ETO where my experience, training and good work habits will be an asset to your Company. I have 17+ years experience at sea.I have experience with Kogsberg Simrad SDP 21 onboard DSV DP2.I have got DP Technical & Maintenance Course.

Experienced Quality Engineer with Six-Sigma/Lean experience

I have more than 27 years experience in oil and gas industry in India and the middle east countries like Oman, UAE ( Sharjah and Abu Dhabi) both in offshore and onshore . I have worked in pipelines/piping design in consulting , EPC and also operating companies in the above countries

OIL / GAS Industry professional with 35 years experience, strong organizational visual, Expert strategist, Designer, Analyst, Planner, Team Leader, Proven track record combines expertise in Quality Control Inspections, Cathodic Protection (Impressed &Sacrificial Anodes System

In-House Landman

Construction Manager

Free! PDS Piping Designer with Over 20 years experience within the Oil and Gas, Petrochemical, Refinery, Textile, Pharmaceutical and Nuclear Waste Industries

Twenty (20) years professional experience executing multi-million dollar projects in both domestic and international locations, acting as Owner representative in project controls and business management on major EPC, Lump Sum Turnkey and Joint Venture projects supporting Oil projects

A dynamic professional with over 2 decades (25 years) of rich experience in Project Machinery Planning & Execution, Erection & Commissioning, Maintenance, Quality Assurance, Process Enhancements and Man Management.

ArcGIS 8.x/9.x, ArcGIS Server, ArcObjects, Virtual Earth, C#, VB.NET, ASP.NET, VB6

Control & Instrumentation Engineer

Design Expert, Team Leader, Hardworking, Cost Control, Result oriented Instrumentation Engineer who can work on FEED/DD projects with equal proficiency.

Research & Development, Formulation, Manufacture, Maintenance, Project work

First 1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out