Resume - Diploma chemical Engineer 2Years Exprience in Automobile Paint Shop ,2years Expr...

Misco Jobs

Resume #80982

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
To obtain a good Technician where I can apply my previous international experience and versatility to help a company's growth in provides excellent and highly skilled customer service and support.

WORK EXPERIENCE DIPLOMA LEVEL:
2 Years as Member–Production Engineering Department (Painting & Plating Section) at TVS Motor Company, India with hands on experience in Process & Quality control on Liquid (Metal & Plastic)Painting, Powder coating and Electro-Deposition.
TOTAL WORK EXPERIENCE: 4 YEARS

EXPERIENCE IN SSLC (O) LEVEL: ( 2 YEARS)

COMPANY NAME: M/S.SANMAR SPECIALITY CHEMICAL LIMITED-INDIA
DESIGNATION: As a "JUNIER CHEMIST - PRODUCTION"
PERIOD: From 24/05/2002 to 17/05/2004
Products Handling:
PMBC (PARA METHOXYBENZYLCYANIDE), FRAAMBINON, CHAN/CHEA (CYCLOHEXENYLETHYLAMINE), ACETONE THIOSEMICARBAZONE, ANISYL ACETONE, COLCHICOSIDE, THICOLCHICOSIDE AND COLCHICINE
JOB PROFILE:
I am working as 'Junior Chemist. I am responsible for the complete shift activities like Maintaining Process parameters through Manual & DCS, trouble shooting, dispatch and Manpower handling.
Initiating work permits for regular and shut down jobs and execution of job with safety standards.
Maintaining good environment at work place
EQUIPMENTS HANDLED:
REACTORS: GLR, SSR& CLARIFIER
HEAT EXCHANGERS: Shell and tube, Double pipe shell and
Tube Spiral Type.
EVAPORATION: Multi Stage, Single stage Evaporation.
DISTILLATION: Atmospheric, Vacuum, and
Fractional Column Distillations.
PUMPS: Centrifugal Pump, Diaphragm pump
Multi Stage Centrifugal Pump, double
Suction Centrifugal pump, reciprocating pump, Screw Pumps and various type of dosing pumps.
DRYING: Vacuum Tray Dryer, RCVD rotary cone
Vacuum dryer, FBD (Fluid bed dryer),
Spray Dryer, Rotary Dryer.

KNOWLEDGE OF SAFETY:
Fire Fitting, Emergency mark drill, IMS, Work as per ISO -14001,5S,TPM, kaizens, OHSAS, Work Permit System of cold, hot, Vessel entry, Excavation permits.
AREA OF EXPOSURE:
* Distillation Unit
* Blending vessels.
* Triple effect evaporation unit
* Effluent treatment Plant
* Cooling towers / Chilled water / PSA N2 system / instrument air system

TVS MOTOR COMPANY profile:-

* 2 rd Largest Two wheeler Company in India with market share of 21%
* Production Capacity of 1.2 Million vehicles with an area of 510 acres
* Has won the Deming Prize Award
* Exports to 32 countries
* Turnover of USD 2 billion
* Manufactures entire range of two wheelers: Motorcycles Scooterettes & Mopeds
* 5500strong manpower

NATURE OF WORK @ TVS MOTOR:

New Paint process Development.
Process audit as per schedule.
Productivity improvement projects
New Shade introduction.
Capacity enhancement.
New models process & product proving.
Cost saving programmes in paint&thinner.
Paint consumption study.
Jigs&trolley design for new painting system.

PROJECTS UNDERTAKEN and SIGNIFICANT ACHIEVEMENTS @ TVSM:

Process, product design&line proving of FLAME motorcycle.
Jigs&trolley design for complete FLAME model
Online sticker & mask development for STAR-110 CC model.
Worked at alpha &Beta stages for NEO model upgradation.
Worked on SCOOTY basic model & its upgradration.
Painting finish improvement of Fuel tank & Plastic parts for existing & New models.
Introduction of Powder coating for Engine parts painting.
Jig density improvement by 50% for colour parts of MOPED painting.
Implementation of manual Electro-static guns.
Productivity improvement & SMM reduction in painting processes.
Introduction of CED for MOPED – Chassis painting.
Paint cost reduction by introduction of alternate sources for Paint & Thinners.
Preparation of Engineering, Operation & Inspection standards for Paints, Painting processes and Painted parts.
Inspection and auditing Vendor's paint shops as per schedule.
New shade development for Paint & Stickers of New Products.

EDUCATION:

Diploma in Chemical Engineering from Thanthai Rover Polytechnic college, Perambalur affiliated to State Board Technical Education, Chennai (India)on April'07 with an aggregate of 64% /First class.
SSLC from Govt Hr Sec School, M.Poodaiyour, Cudalor affiliated to State Board on March'02 with an aggregate of 66%.

TECHINCAL SKILLS:
Paint norms calculation, correction and standardization.
Pre-treatment process optimization.
Transfer Efficiency study and further improvement.
Applicator parameter optimization for fine tuning of painting system.
Shade matching for metal & plastic painted parts.
Dust control reduction in plastic painting.
Jig envelope optimization for CED process.
Jig design for new painting system.
Process&product knowledge of metal & plastic painting,powder coating &CED.
Process oriented issues and its trouble shooting in painting process.
Providing online engineering support to painting operation.
Knowledge of TS 16949,7 QC tools,kaizens,TPM,JIT.
INPLANT TRAINING:

MADRAS CEMENTS LTD, Alathiyur Works, Cement Nagar [po],Perambalur [Dt].
PERAMBALUR SUGAR MILLS.GOVT.LTD, Eraiyur[po],Perambalur [Dt],

EXTRA CURRICULAR ACTIVITIES:
State Level Paper Presentation on "Chemical Engineering Equipment Designing in Heat Exchanger".
National level seminar participation on "Recent trend in chemical technology".

INTERESTS & HOBBIES:
Music, Reading, Cricket, and Cycling.

PERSONAL PROFILE:
DOB / Age 06thJune 1986 / 22
Sex Male
Languages Known English, Tamil, and Telugu

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6651 to 6700 of 10903)

Go to Search Parameters...

Brief Description

BS Economics, administrative/secretarial/research/computer skills, ICDL

Petroleum Process Engineer with Oil and Gas Experience

I am a Chemical Engineering Graduate with an Engineering Certification from the Robert Gordon University, Aberdeen via the Shell Training Programme, SITP/1. I work as a Petroleum Engineer in an Oil & Gas consultancy firm. I possess Business Development skills and an interest in Project Management.

The resume is a combination of my field of operation which include safety officer and rig medic.

International Manager: able to relocate and start almost immediately.

Working with drills and cranes for 10 years. iam very quick learner and extremely hard worker. i love working long days and i am always up for a challenge.

M.E.(Process Instrumentation),automation

Recent graduate with an MSc degree in Oil and Gas Engineering and looking for a role where I could use the engineering knowledge and academic skills that I have gained from my MSc degree, and develop a long term drilling and well engineering career.

filing, answering telephone, replying e-mails, making an input and output letters, weekly and monthly report, booking a hotel and travel reservation, preparing for expatriate’s visa and passport also the flight schedule, and checking for crew change.

More than 10 years experience in piping engineering, project control and engineering coordination for Petrochemical customers.

I am C.A Finalist (Institute of chartered accountants of Pakistan) and have completed my articles as per C.A bylaws for the period of 3&1/2 years with Avais Hyder Liaquat Nauman Chartered Accountants (A correspondent firm of RSM international. I have sufficient expertise in account, tax, financial m

Engineering Degree and having experiances on several industries (Manufacture, Petrochemical and Oil&Gas) for Vibration or Mechanical Position

Rig Manager OBJECTIVE: To obtain a challenging and creative position as an Oil field Engineer, that will allow me to provide a meaningful contribution to the Organization, utilizing my acquired knowledge and skills in the field of Oil Drilling Engineering.

Proactive, Adaptable, Practial, Organised, Thorough, Skilled manager, Team Player, Personable. I am looking for a shore based opportunity to make use of my drilling engineer skills and industry knowledge

Available for a 4 month Co-op Education work term from May 2004 – August 2004. Will have completed 7 of 8 academic terms towards a bachelor of Engineering degree.

8 years of international experience mainly in the oil field. Field Service Manager/General Field Engineer/IT Project Manager for Schlumberger worldwide/SCADA Business Developer Manager/Project Manager and SCADA Protocol developer for South America.

I have been working international as a contract wellsite supervisor, My area of expertise is in completions, abandonment and workover. I have worked on wells to 3500m in depth, sour from 1%-3% for about 1/2 my career.

KEYWORDS Mechanical, Electromechanical, Power , Control , sheet metal, Acoustics , ISO 9001, CAE , CAD, CAM, Manufacturing, Production, Maintenance .

Experience with successfully managing all aspects of a large drilling center including implementing manual and automated drilling systems; selecting, managing and training staff.

Primarily focus on well completion, stimulation, and optimization. Design fracture treatments, cement completions, acidizing, and all completion methods.

I am presently employed at Coastal Aruba Refinery, Co. N.V. affiliate of El Paso Energy Corporation, (formerly Lago Oil Refinery & Transport Co. Ltd., subsidiary of Exxon until 1985) in Aruba, where my current function is that of lab technician with a permanent contract.

¨ Over seven years of experience in the Design & Detailed Engineering of Piping Systems for various metallurgical & power plants. ¨ Working knowledge of computer software packages; conversant with international codes & standards.

Seeking position that would help develop myself in the management field in the Petroleum Industry

Total 8 years of experience. Well experienced in specifying, designing, detailed engineering, requisitioning, bid evaluation and reviewing vendor data of various types of Pressure Vessels, Tanks and packaged units. I am working from Houston, USA office of Bechtel since 2nd Sept. 2002.

Graduate-level Reservoir Engineer seeks to be part of proactive team to use strong analytical and problem solving skills in production, reservoir and geothermal engineering for a full-time position.

Hands on experience in the dynamics of the offshore oil drilling industry. Proven, reliable and committed to getting tasks done under tight time constraints. Good time-management skills with an emphasis on attention to detail to ensure quality of data whilst working to a deadline.

To establish wider horizons in the automation of business with the inherited knowledge in the respective field.

Excellent oral and written communication ability. Computer literate, with proficiency in Word, Excel, PowerPoint, AutoCAD2000i, MS Project 2000, CAD, Matlab, Microcap, Internet, Programming languages Assembler, C and VHDL. Extensive use of laboratory test equipment

An International Quality Assurance & Safety Manager with a proven track record for ISO 9001 implementation, maintenance and development within the Oilfield Engineering and Manufacturing Industries.An experienced Lead Auditor of Management Systems, Engineering Projects and Suppliers

I am a senior technician in gas exploitation lng option from algerian institute of petroleum(aip) and i had done my studies in english. i have 2 years experience in oil/gas production facilities in algeria. i am working with Americans.

I am lookıng for engeenerın posıtıon.I dont have experience but I can learn quıcly.I do love my jop.If you ınterested ın my cv please contact whıt me.Many Thanks

Resume for the post of Planning Engineer

I'm a competent and experienced pressure vessel & heat exchanger design engineer with excellent communication, motivational, organisational and interpersonal skills. An individual who possess a hands-on pragmatic approach to work, able to work alone or as part of a team.

I have worked in an engineering consultancy firm for Petrochemical, Refinery and Oil and Gas. Currently, I'm an Electrical Design Engineer of JGC Philippines, Inc. performing 2d and 3d design and draft in Autocadd and Microstation and 3D PDS respectively, for electrical works like Lighting, Power

I have 11 years of work experience, in Designing & Drafting various types of drawings using computer software, I am well experienced in drafting of engineering deliverables for Electrical, and Instrumentation for Offshore and Onshore Oil & Gas, Petrochemical and Power Plants.

Now I am in USA as a Research Scholar. I have done masters in geophysics. Also I have done masters in computer science. I have one and half year working experiece of seismic data processing and Interpertation, Unix, OpenWorks and Seisworks software support. Good communication skills. Hardworker

E&I QA/QC Inspector, Certified QMS Lead Auditor, Having Oil&Gas onshore and offshore experience

Christo has been involved in Labour Risk Management, Organizational Development, Human Resources and Training in the private and public sectors for 18 years. His experience in the private sectors covered the broad Human Resources field and he has conducted management training in the public sector. H

WANT TO HAVE A SHORE JOB AS FLEET MANAGER OR ON RIGS AS R/O

10 years offshore oil/gas experience, Roustabout,Production Operator,Lead Production Operator

A sound technical chemical engineer with much back gound of marketing knowledge/ experience. Hence able to work techno-commercially

Strong experienced leader with very good communication, negotiation and analytical skills. Very familiar with related design software & MS Office applications. Looking for permanent/contract position as Senior Civil, Structural, Offshore pipeline or Project Engineer for Oil & Gas Projects

Millwright traveler, precsion, turbine, str.welder, mech, steel/iron work, machinist

A Senior Electric and instrument Engineer with a wide range of experience in the copper smelter & refinery. Able to work on own initiative and as part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives.

MSc in Petroleum Geology.

I have completed the post graduation diploma in piping engineering from suvidya institute of technology,mumbai in june-2007 and looking for piping job.

MechanicalEngineer

Diploma chemical Engineer 2Years Exprience in Automobile Paint Shop ,2years Exprience in Organic Chemical Manufaturing

Competent in Microsoft Office application, 2D Auto-cad Design, Good Oral and Interpersonal Skill, Excellent Administrative and Managerial Skills.

Experienced rigger welder with a host of offshore eexperience, a current Brazilians visa and extremely hard working. Available beginning April 2009

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 [ 134 ] 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out