Resume - To offer services as Senior piping designer for onshore and off shore oil and ga...

Misco Jobs

Resume #80990

CONTACT INFORMATION:
View contact information...

Career Objective
To offer services as Senior piping designer for onshore and off shore oil and gas projects by using PDMS & PDS 3d model system

Summary of Qualifications
Knowledge of: Design and Modeling Piping, Equipment and Supports. Pipe Stress Analysis.Per process flow diagrams per ASME design codes.
Market Sectors: LNG, Offshore FPSO, Petrochemical, Refinery, Chemical & Polymers, Mining, Ammonia/Fertilizers and Olefins.
Projects Scope: EPC, EPCc and EPCm.

Able and willing to work in any environment on any assignment given.

Work History

April, 2009 –
February, 2008

KBR – Houston, TX.
Piping Design – Senior PDMS Piping Designer.
Responsibilities including Planning, Developing, Coordinating and Quality assurance. Performing activities as Design and Modeling Piping, Equipment Arrangement and Supports; Developing, Checking and Review Piping Isometrics. Interpret Supplier Equipment Drawings. Extraction Piping Plans and Isometrics Drawings from Model. Function such as Interface between technical team and other disciplines and Engineers. Job to be executed in accordance with all applicable Codes, standards, Specifications, P&IDs, Procedures & Policies of Company.

February, 2008 –
December, 2007
Bechtel – Houston, TX.
Piping Design – Material Take off Specialist.
Responsibilities including Tracking of Isometrics and Material Take Off using Isometrics, Piping Plans, Piping Specifications and P&IDs.

December, 2007 –
Jul, 1998
KBR MONTERREY– MONTERREY, N.L. Mexico.
Piping Design – Technical Professional / Material Specialist.
Responsibilities including Planning, Developing, Coordinating and Quality assurance. Performing activities as Design and Modeling Piping, Equipment Arrangement and Supports; Developing, Checking and Review Piping Isometrics, Tracking of Isometrics, Material Take Off, Input of Material and Use of Spool Tracking. Interpret Supplier Equipment Drawings. Extraction Piping Plans and Isometrics Drawings from PDMS Model. Pipe Stress Analysis using Caesar II. Function such as preparing the material control plan for each project to identify scope, specifications, procedures and systems interfaces. Interface between technical team and other disciplines.

Jul, 1998 –
August, 1992
PEMEX – Cadereyta, N.L., Mexico.
Piping Design – Designer at site.
Responsibilities including Planning, Developing, Coordinating and meet with Quality assurance. Performing activities as Quantify and check Materials for Piping, Electrical and Civil Group in accordance with Standards and Specifications. Field Assignment working with As-Built Drawings, Piping Plans, Piping ISOs and Equipment Arrangement. Function such as interface between work team and Contractors.

Education
May, 2004
INSTITUTO TECNOLOGICO DE NUEVO LEON- Guadalupe, N.L. Mexico.
Education Level: Professional
Major: B.S. in Industrial Engineering
Total Hours: Graduated
Certifications: Title No. 4462369
Language: Spanish
English Language: 80 %

Computer Skills

* MDS
* Caesar II (4.5)
* AUTOCAD
* Micro Station 2D
* PDMS –SR04 & SRO5 3D
* IPMS System
* Microsoft Office (Word, Excel, PowerPoint, etc.)

Project Experience Summary
Year Client Project
Name Project
Location Project
Type Project
Scope Softwares Project
Role
2008-2009 TOTAL PAZ -FLOR
Block 17 Angola, Africa Offshore (FPSO) EPC PDMS, MDS, AUTOCAD Safety Designer
2007 SHELL PEARL Ras Laffan, Qatar Gas to Liquids EPC PDMS Technical Professional
2006-2007 Tomboa Landana Tomboa Offshore EPC PDMS, MDS Technical Professional
2006 EBIC Ammonia Plant Suez Industrial Zone Egypt Ammonia /
Fertilizers EPC PDS Technical Professional
2005 KBR OPTI Edmonton, Canada Onshore FAB Microstation 2D, IDMS Technical Professional
2004-2005 BP Greater Plutonio Block 18 Angola, Africa Offshore (FPSO) EPC PDMS, MDS, Technical Professional
2004 Sasol Superflex Secunda, Republic of south Africa Chemical and Polymers EPCM PDS Microstation 2D Designer Drafter
2004 Karsto Expansion In Amenas Algeria, Africa LNG E PDS Designer Drafter
2003 Union Fenosa Segas LNG plant Damietta, Egypt LNG EPC PDS, Microstation 2D Designer Drafter
2002 WMC Extraction plant Enhancement Adelaide, Australia Mining EPC PDS Associate Designer
2002 Esso Chad Chad/Cameroon Development Chad, Africa Petroleum Refining EPC PDS Associate Designer
2002 Exxon Mobil Low Sulfur Mogas Beaumont, Tx. Petroleum Refining EPC IPMS Material Specialist
2002 Exxon Mobil Low Sulfur Mogas Billings, Montana Petroleum Refining EPC IPMS Material Specialist
2001 Phillips Petroleum Q-Chem Qatar Olefins EPC IPMS Material Specialist
1999-2000 BP Amoco LAO Prairie Rose Alberta, Canada Olefins EPC MATERIAL KELWAY SYSTEM Material Specialist
1999 Exxon Mobil Exxon SOP Jurong Island Singapore Olefins EPC MATERIAL KELWAY SYSTEM Material Specialist
1998-1999 Formosa Plastic Corp. Ethylene Texas, USA Olefins EPC MATERIAL KELWAY SYSTEM Material Specialist
1992-1998 PEMEX Plant Catalytic, integration of the Catalytic plant, Sulfur plant, Cadereyta, N.L. Petroleum Refining Construction of petrochemical plants AUTOCAD, MICROSTATION, Piping Designer, As built in site,

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6201 to 6250 of 10902)

Go to Search Parameters...

Brief Description

MSc GEOLOGY, RESEARCH WORK IN ELECTRICAL RESISTIVITY METHOD IN GEOPHYSICS FIELD

B.E.(Chemical), 6 years of experience in offhsore oil and gas platform of which 3 years in control room.

Over 9 years experience in Instrumentation & control in Chemical, Power, Cement, Sugar & Petrochemical industry

I have worked in Pre-Commissioning, Commissioning, Normal running Plants. In India and Abroad, both places I have worked. I have worked in Chemical, Fertilizer and oil and gas industry

QA/QC Inspection, Fabrication, Installation, Facilities Upgrade etc.

Special Skills in DCS Operations

SAP SD functional cons. resume total 6 yrs exp 3yrs in SAP SD+ IS OIL functional consultant

Medical support to clients operating in remote or hazardous and offshore environments worldwide. Maintaining adequate medical facilities. Providing services such as First aid training, Health and safety checks and enforcing the companies HSE plan, and ensuring a safe working environment.

Mechanical, Automotive, Project, Calibration, Engineering, Production

Instrument technician

I am working as safety officer at Aramco Saudi Arabia for more than 6 years. I am interested to work in your country. Please arrange my telephonic interview and if you need further documents please inform me on my email.

Operation and Maintenance of Utilities, Project Management, Energy Management, Six Sigma and IT applications

In Indian Naval Hydrographic Department, I have worked in various organizations of Naval Hydrographic Department at various capacities including survey assignments onboard ships, National Hydrographic Office as Quality Controller/Quality Assurance member and National Hydrographic School as Hydrograp

15 year career of Document Management and Control. Assisted in the development and implementation of EDMS. Held over sea positions in various European locations, Middle East and Asia. Conversant with International standards, guidelines and regulations.

A Nigerian. Qualified and experienced geoscientist with 5+years cross-functional experience.

To offer services as Senior piping designer for onshore and off shore oil and gas projects by using PDMS & PDS 3d model system

Process Engineer 10 years O&G + Mining Experience, Global leader in BR&E Promax process simulation, Gas Dehydration, Water Treatment (both produced water and seawater injection), hydrocyclone, flotation and filtration technologies. Comfortable from the Pre-FEED level down to the nuts & bolts.

Fourteen years of experience in Office Administration, Procurement, HRD, Public Relation and Sales Coordination has energized me to seek suitable position in renowned companies. My quest is to further broaden my horizons so as to facilitate better opportunities to serve &better objective to achieve

Responsible for business development of company & for recruitment of professionals like Project Managers, Engineers, &Technicians for Engineering, & Construction industry in India, Middle East, ,etc.To develop and manage our own portfolio of clients and source the most suitable candidates .

International Weldig Engineer (IWE) , CSWIP 3.1 and Level II(two) Pt,Mt,Ut and RT

Degreed in occupational safety and health, 18 years experience in construction safety, sveral yrs. Overseas exp. Working with multi-national staff. Excellent medical background

I am a practicing Health & Safety professional and I have built substantial experience as an HSE Advisor with various organizations onshore, offshore and internationally.

A highly qualified and experienced marine engineer, with extensive experience on LNG ships. Skilled in all management roles and function including IT. A skilled problem solver who takes general overview and generates viable solutions.

Experienced Industrial Structural Engineer - concrete, steel - 20+ years, UK & US codes

HSE Manager/adviser with 25+ years experience with large multi-national corporations. Developed successful top quartile HSE/Safety programs on 4 continents. Expert in HSE management, risk assessment, and HSE/safety auditing techniques.

Exceptional performance as a Senior Process and Production Engineer for major industrial, polymer, refining, and specialty chemical manufacturing companies on the Texas Gulf Coast.

U.S Navy Aviation Gas Turbine Jet Mechanic

-A team player, flexibile, detail-oriented, and self-motivated

Working as a CNC Lathe machine operator from 04/11/2008 to till date in L&T Plastics Machinery Limited(Injection Molding).,Chembarambakkam, Chennai .

Acquisition and title research

Over 11 years of SAP BW BI experience as a developer, Lead and Manager

Diploma In Mechancial Engineering+NEBOSH Level-3+Environment, Health and Safety Management Specialist Certification from NASP of USA+ ISO 14001:2004 & 9000:2000 Certified Lead Auditor with 15 Years Experience in Oil&Gas as HSE Advisor/Engineer/Supervisor/Coordinator/

I have more than 15 years experience in the field of process control instrumentation and analyzers and have many related field trainings from abroad and in Pakistan. I am forwarding my personal profile for your consideration.

Draftsperson - coil tubing downhole tools, coil tubing wellheads, etc

Engineering experience since 1999 in diversified electrical, instrumentation, automation, and industrial computer applications, generally related to Oil & Gas Industry, Steel, Automotive, Aluminum, Process and Machine applications.

Experience Derrickhand

Project Expeditor

Mechanical Engineer Professional experience of 35+ years in Engineering and Project Management

AutoCad drafter

Piping Designer – 3D Modeling - PDMS - Microstation - Plant Space – 3DM - Auto-CAD

I have a 4 years degree in geology with a relevant experience as wellsite geologist. Actually I have witnessed more than 30 horizontals wells drilled and 10 verticals one's.I can say that I have gained a great knowledge of how to solve drillings problems when they occur.

Having more than 9 years of experience in petrochemical, oil & gas process plants and utilities. Having experience in commissioning, pre-commissioning activities in Field, DCS & SCADA. (FOXPORO & Emerson Delta-V Systems)

Key specializations: GE Turbine control systems- MKIV, MKV, MKVI, GE excitation systems- busfed, potentialand compound source, SVR, rotating DC, brushless, EX2000, EX2100, Load commutated inverters (static start), electrical and generator protection. DLN 1.0, 2.0+, 2.6 systems, versamax PLC, genius

BE (MECH ) PIPING DESIGNING & STRESS ANALYSIS

Well Engineering skills

Autocad drafter designer

I am a fully qualified derrickman and have been working offshore for the past 9 years.

I have learned Software : Pipesim 2000, Caesar II, Microsoft Office, Power Point, Autocad 2D

I worked as mud engineer for 2 years in Indonesia and now I am solid control engineer and I am running a job for Drilling Project in Libya

33+ years in the oil and gas service industry. His portfolio includes (but is not limited to) field operations and supervision, sales, marketing, business development, and management.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 [ 125 ] 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out