CONTACT INFORMATION:
View contact information...
EXPERIENCE SUMMARY / CAREER SYNOPSIS:
17 years of post qualification experience in Design Base Memorandum (DBM), Conceptual Studies, Front End Engineering Design (FEED), Detail Engineering and Project Engineering for projects in Oil & Gas (Upstream and Downstream), Petrochemical, Chemical industries like SNC Lavalin (CANADA), Mott Mcdonald (UK) and ICI India ltd (UK). Having extensive experience in Detail Engineering of Pressure Vessels (Oversized & Shop Fabricated), Reactors, Separators, Drums, Columns, Spheres, Tanks (Storage & Low Pressure), Flare Stack, Vendor Packaged Equipments, Emergency Diesel Generator and Overhead Cranes.
Conversant with ASME Sec.VIII Div.1 & Div2, PD5500, API 650, 620, 12D, 12F, 12P, UL142, ASME B16.5 and B16.47 code requirements. I am also conversant with the project specification requirements of various oil companies such as Saudi Aramco, Petro Canada etc.
Carrying out Preparation / Review / Approval of Complete detailed mechanical design of pressure vessels and Tanks using design software (Compress- Cod ware) and preparation / checking / approval of equipment datasheet, Control drawings and Vendor GA Drawings. Preparing/ Reviewing / Approval of Project Specifications and issue of Material Requisitions, Bid Evaluation.
CAREER SUMMARY / COMPETENCIES:
* Preparing of design calculation, user design specification (Div.2), manufacturers design report (Div.2), Manufacturer data report (Div.1), R form for repair job and material ordering specification based on code and client requirement
* Reviewing of fabrication drawings, client documents and material take off. Coordinating with client and sub contractors. Also coordinating with project engineering group, QA/QC department and fabrication shops
* Preparing of mechanical data sheets (input comes from process) and material requisitions for enquiry as well as purchase that includes seven sections such as- i) scope of supply, ii) list of documents, iii) vendor data requirement, iv) inspection requirement, v) recommended spare parts, vi) QA requirements and vii) exceptions and clarifications
* Attending bid clarification meeting, preparing technical bid evaluation and reviewing vendor documents for static equipments such as Pr. Vessels, reactors, separators, drums, columns, spheres, tanks, flare stacks etc.
* Designing static equipments in accordance with ASME SecVIII Div1 & Div2., PD5500 (for pressure vessel), API 650 (welded steel tank for oil storage), API 620 (low pressure tank), UL 142 ( steel above ground tanks for flammable and combustible liquids), API12D (field welded tank), API12F (shop welded tank for storage of production liquid), API12P (fibreglass reinforced plastic tank), ASME B16.5 (pipe flanges and flange fittings) and ASME 16.47 (large dia flange)
* Familiar with welding RT, LT, UT and heat treatment process
* Using various materials such as SA516 Gr.70N, SA240-TP304/316/316L etc. Forged Flange (B16.5) for material SA-182 F304/304L/316/316L, SA387 Gr.11 CL1, SA240TP 32 clad
* Assisted in preparation of estimates for different Rotary Equipment
* Conversant with rotary Drum filter, Rotary Vacuum Filter, Agitator and Gear Boxes of various capacities & make
* Coordinated preparing EWP (engineering work package) to assist CWP (construction work package) into FIWP (field installation work package)
* Executed & commissioned 90M3 refinery tank farm including pumps & 32" pipelines about 10km. in length. Also Executed & commissioned oil storage terminal & pump house
EMPLOYMENT DETAIL AND RESPONSIBILITIES:
Since 2006
SNC Lavalin Inc. Calgary, Canada
Position: Sr. Static Equipment Specialist
Project Handled
-Petro Canada Fort Hills Project, Froth Treatment Plant 230,000 BPD
* Designing of 600psig & 660psig two phase separator with MDMT -41OC
* Designing 27mt height X 10mt dia froth surge tank using 'compress' software
* Reviewing and approving of vendor pressure vessel design calculations and shop / site fabrication drawings according to codes & purchase order specifications
* Preparing RFQ packages for Shop fabricated pressure vessel, Oversized pressure vessels, Scrubber, Retractable Feed Nozzles, Detonation Arrestors
* Coordinating with project engineering team in terms of planning, scheduling, estimation and risk assesment
* Attending technical meeting with client and vendor
* Technical data sheet preparation and review for pressure vessels & static equipments
* Liaise with client, third party inspector and authorized inspectors for engineering related issues
-Cabruta Refinery Project, Venezuela 442,000BPSD
* Wrote mechanical design criteria in DBM (design basis memorendum) stage
-Saudi Arabian Oil Company (Saudi Aramco), Gas Oil Separation Plant (GOSP) -250 MBCD
* Prepared RFQ packages for API 650, 620 tanks, chemical dosing packages, overhead Cranes and emergency diesel generator
* Prepared bid clarification questions, TBE and RFP packages
* Prepared FAT (Factory Acceptance Test) and witnessed / hold point schedule
-Saudi Arabian Oil Company (Saudi Aramco), Water Injection Pump Stations (WIPS)
* Calculating pressure vessels and static equipment weight for estimation and logistic purpose
* Prepared data sheets, material requisitions(MR) and evaluate technical bid for column, column internals, reactors and various type of pressure vessels such as leg, lug, saddle & skirt supported for hydrocarbon services
2005-2006
KIEWIT ENERGY CORPORATION INC. Calgary, Alberta, Canada
Position: Mechanical EPC Coordinator
Project Handled
-Meg Energy, Canada- Cristina Lake SAG-D Project, Cristina Lake, Alberta, Canada
* Looked after overall engineering progress against deliverable list engineering progress model review, monitored of CWP and module package coordinated with procurement group for critical equipment delivery
* Prepare requisition for quatation package (RFQ) and specification for static equipments like storage tank, flare stack, separator, reactor, water treatment package and TEG package. Select vendor packaged equipment and make packages for quatation and bid evaluation. Prepared of specification and control drawing for bidding. Bid evaluated and make recommendation for equipments purchase. Prepared SPDP (spare parts data package) requirement and ordered start up & commissioning spare parts of required equipments
2000-2005
MOTT MACDONALD ENGINEERING CONSULTANCY, Mumbai, India
Position: Senior Mechanical Engineer
Project Handled
-Zuari Oil Tanking Ltd, Goa, India
* Prepared engineering for naptha storage tank including floating roof
* Decided fire proofing, insulation and painting requirement for pressure vessel and storage tanks
* Coordinated piping, civil and instrumentation for finalizing nozzle locations, detail of ladder/platform, pipe supports, foundation design and instrument nozzle locations
* Coordinated client and vendors at the time of shop fabrication
* Modified pump house equipment orientation and pipe sizing in the basis of existing data package
-Mathura Oil Refinery, Delhi, India
* Preparation of design calculations & equipment data sheets for HP & LP flare K/O drum, diesel storage tank etc.
* Checked out design of existing equipment for suitability under the new process environment
* Assisted in estimations for different rotary equipment including pumps and compressors
-Sandoz Ltd., Oral Solid Dozes Pharmaceutical Plant, Mumbai, India
* Upgraded blister packing machine capacity by designing smaller conveyor
* Prepared engineering for cooling tower
* Prepared of pressure vessels and tanks design specification, containing description of various types of pr. Vessel, code used, fabrication practices, in accordance with guidelines of ASME, API codes
-Century Enka (India) Ltd., Nylon tire Cord Plant Pune, India
* Prepared RFQs after front end engineering, evaluated bids and prepared RFP
* Designed, coordinated and commissioned MeOH Filtrate hold vessel and NBA wash filtrate collection tank
* Designed & prepared RFP (requisition for purchase) rotary drum filter, rotary vacuum filter, agitator and gear boxes of various capacities and make
* Conducted bid conditioning meeting and prepared engineering PO Package of 'A' category items
-ISAGRO Agrochemicals India Ltd., (100M), Gujrat, India
* Duties and responsibilities included preparation of material take off, technical purchase specification, design using 'Pvelite', calculations, detail drawing, laison with other department/client/subvendors/fabricators for carbon steel towers and weld overlay steel reactors
* Worked as a pr. Vessel design engineer, responsible for complete design and detailed engineering of pr. Vessels within available time frame. Duties and responsibilities included preparation of material requisition, technical delivery conditions, detailed design calculation, checking of general arrangement & detailed fabrication drawings
* Designed based on technical specification and data sheet of size 2310 mm I/D x6450 mm long (TL/TL) x 10 mm thk with 2:1 ellipsoidal head as per ASME section VIII Div1
1991 - 2000
ICI INDIA LTD., (a subsidiary of ICI, UK), Calcutta, India
Intermediate Mechanical Engineer
Project Handled
-ICI India Ltd., Poly Urethane Plant, Mumbai, India
* Prepared RFQ, TBE and RFI for 10T cooling tower
* Organized reactor hydro testing and pneumatic testing including limpet coil
* Stewards the interfaces among project team and EPC contractors organizations with respect to static equipment engineering and design to ensure quality and minimize changes during execution
-1000 TPA Paints Manufacturing Plant at ICI India Ltd., Mumbai, India, 1000TPA
* Developed engineering package for bag slitting machine
* Developed engineering package for dust extraction system
* Changed material specification for agitator pad IS2062 Gr A + 3thk & lining (SA240 Gr.316)
* Prepared engineering for storage tanks and low pressure storage tanks in accordance with API 12D, 12F, 12P and UL142 (fiber reinforced)
-ICI India Ltd., Rubber Chemical Plant, Calcutta, India
* Done complete engineering for debottlenecking of MIBK dosing system
* Negotiated scope of supply and drawning specification of rotary and vacuum drum filter
* Supervised successful execution of project
* Incorporated the changes to data sheet made on the P&ID, and communicated to vendor
-Nitrocellulose project at ICI India Ltd
* Optimized nox scrubber system for nitric acid recovery system
* Radiography done 10% (spot) for shell and dish end and 100% for all 'T' joints
* Review of vendor documents such as fabrication drawings, GA drawings, operation & maintenance manuals, start up procedures and data book
EDUCATION:
„« Mechanical Engineering diploma (4years after High School Graduation) from Birla Institute of Technology (India).
„« APPEGA registration is on progress
„« PMP is on progress from Mount Royal College, Canada
Done PMP exam preparation workshop, Risk & Procurement, Time & Cost Management
REFERENCES AVAILABLE ON REQUEST
View contact information... |