Resume - More than 17 years experience in welding inspection and NDT testing. Main duties...

Misco Jobs

Resume #81107

CONTACT INFORMATION:
View contact information...

Professional Certification
: CSWIP Welding Inspector 3.1 TWI, UK.
Cert No: 30348
CSWIP Radiography Interpretation Level 2
Cert No: 32072
Ultrasonic Level 2 PCN -3.1,3.2,3.8,3.9
PCN No: 203430
ASNT Level 2 Radiography Interpretation.
ASNT Level 2 Magnetic Particle Testing.
ASNT Level 2 Dye Penetrant Testing.

Course Attended: CSWIP Welding Inspector 3.1 conducted by TWI
OIS Malaysia in-house course in UT, RT, MT,
PT and Eddy Current.
OIS Malaysia in-house course in Radiation
Safety.
Basic NDT Principles.
Malaysia AELB Level 2 Radiation Inspection.
Lost Prevention System (LPS) organized by
Exxonmobil Kuala Lumpur.
Offshore Safety, Sea Survival, Basic Fire
Fighting.
And Helicopter Underwater Escape Training
(HUET) at MAS/SEQU Training Center Kuala
Lumpur (expired).
H2S Basic Course.

Computer Literacy: Microsoft Word, Excel and Power Point.
Point of origin: Kuala Lumpur, Malaysia
Home Airport: Kuala Lumpur International Airport
Preferred work location: Malaysia
Salary: Neg.
Availability: One week notice

EXPERIENCE BACKGROUND

About 17 years been in the Oil and Gas Construction Industry for upstream and down stream works. Involved in erection, fabrication and testing of steel structural, piping (carbon steel and low alloy steel), pressure vessel, gas and oil pipeline, offshore laybarge, offshore platform upgrading work and new refinery plants.
Build up the career starting with Training QC Inspector for Structural, NDT and Piping works. Lately for the past 4 years been as General Inspector post for Petronas Carigali, Exxonmobil (EMDC), Reliance Industries of India and Murphy Oil of Malaysia. Mainly work scope are inspection, installation and erection, monitoring for steel structure/piping fabrication of topsides modules and jackets, refinery plants, vessel, pipelines, FSO and subsea structure, piping and pipelines.
Work Site – AY Engineering, Promet Fabricator, Sime Sembcorp Engineering and Malaysia Shipyard and Engineering all are located at Johore state. The other location were at Naval Dockyard and KHL Engineering at Lumut Perak, Geahin Engineering at Malacca, Kerteh Oil and Gas Terminal at Kerteh Terengganu, GPP 5 and 6 at Kerteh Terengganu, TNB Power Station at Kapar Selangor and LNG 1 at Bintulu Sarawak.
As a General Inspector, the work scope are depending on service contracts.
Scope of work briefly:
* Witnessed Welding Procedure Qualification Test and welder qualification test.
* Experience in welding inspection on piping materials such as Stainless Steel L316 and 304, Chrome-Moly and Incoloy.
* Reviewed all procedures including welding and NDT procedures.
* Able to read ISO, P&ID and GA drawings.
* Perform site quality activities in accordance with Project quality Plan.
* Work with QA/QC Lead to address Project Inspection requirements.
* Implement quality surveillance and inspection activities at construction site both for structure and piping.
* Undertake stage inspection and monitor production process for structure and piping.
* Review contractors and suppliers completion files for accuracy and adequacy.
* Attend and contribute to site and project technical meeting as necessary.
* Ensure materials (structure and piping) supplied meet the requirements of the project specifications.
* Follow the safety rules and practices and assist the site team in promoting site safety.
* Review factory acceptance test and on final quality check prior to shipment.
* Monitor and appraise suppliers and contractors Quality Assurance and Quality control activities.
* Provide early warning of potential quality problems.
* Set up personnel's for site team.
* Set up project QC work execution plan.
* Coordinate daily inspection activities for various discipline.
* Site QC surveillance during construction activity for quality control compliance verification.
Documents Review
Review the project documents such as Project Quality Plan (PQP), Inspection and Test Plan (ITP), QA documents procedure such as NDT procedures, welding procedures, welding consumables control, mechanical test, record of welder performance, IFC and as built drawings, flushing, hydrotest, reinstatement procedures, distortion control procedure, Arc burn control procedure and etc.

Management Involvement
Participated in weekly QA/QC meeting, monitor of NCRs and follow up the close out, keep the QC matters update to QA/QC Lead, give the QC input for progress report and update. Participated in Company/contractor internal audit programmed and problem solving on QC matters.

Code and Standard
Familiar with AWS D1.1, ASME 1X and V, API RP2X, API RP2W/2Z, API 1104 and ANSI B31.3.

Personal Touch
Strength - Teamwork, good communication and ability to analyze.
Expectation - Construction Supervisor and QA Engineer.
Hobby - Soccer and badminton.

Job Attachment Currently
March 2008 – Present
* Fabrication of Murphy Sabah Oil Company Kikeh Subsea Gas Pipeline End Termination (PLET) at Aker Kvaerner Yard Pulau Indah, Pelabuhan Klang, Malaysia.
Appointed as Senior Fabrication Inspector seconded to Murphy Sabah Oil Co.

Work Scope
Reports to Company Site Representative for job progress updating.
Close monitoring on construction and NDT progress base on client and project procedures.
Familiarize with applicable Codes, Standards and Client Specification and also reviewed the approved drawing for the project.
Monitor the QC matter accordingly as per ITP/PQP.
Close monitoring on construction progress structure and piping duplex stainless steel base on client and project procedures.
Coordinate work of the site inspectors.
Issuance of CAR/NCR and follow-up until close-up.
Keep CSR updated with actions and quality issues.
Highlight the issue on upfront stage.
Reviewed all welding certificates including WPS, PQR and welder certificates and also all welding equipments calibration certificates such as welding machine, backing and holding oven and also the PWHT machine.
Carried-out material receiving inspection both structure and piping duplex stainless steel (checked size, type and condition of the materials) and make sure received a copy of genuine Mill Certificates.
Checked the consumables size, type and condition. Incase Basic Electrodes make sure the electrodes were baked as per manufacture recommended. And also check batch certificate for TIG filler wire.
Monitor and carried-out fit-up inspection both structure and piping duplex stainless steel.
Monitor the pre-heating and checked the pre-heat temperature prior welding.
Checked the welding position, weaving size and welding parameter such as current, voltage and travel speed as per approved WPS both structure and piping stainless steel. For piping duplex stainless steel need to check also purging gas.
Checked the consumables and filler wire condition and storage.
Checked the inter pass temperature and make sure the inter pass temperature as per recommended WPS.
Checked safety during welding.
Monitored construction punchlist and line check, outstanding work to carry over and monitor close up.
Checked the cleanliness of the joints must free from spatter, oil or grease and checked the welder and joint identification prior to visual inspection and NDT.
Carried-out visual inspection on both structure and piping, witnessed NDT activities and reviewed RT films.
Monitor compiling of final documentations.

WORKING HISTORY BRIEFLY

May2007 – Feb2008 Fabrication of Reliance KG-D6 Subsea Structure and Piping for Reliance Industries of India at KHL yard, Lumut, Malaysia.
Appointed as NDT/Welding Inspector seconded to Bechtel PMC as a representative to Reliance Industries of India.

2006 –2007 Installation of Sumandak B Pipeline.
Baram pipeline replacement (Baram-A to Baram-G)
10km offshore pipeline replacement from MCOT to West Lutong platform at Sarawak Water Malaysia.
Installation of Sumandak-A platform and 10 km offshore pipe laying at Labuan, Malaysia.
Installation of Abu Cluster A jacket, topside and for Petronas Carigali Sdn. Bhd (Abu Cluster Project) at Terengganu water, Malaysia.
All of the above project were appointed as NDT/General
Inspector represented Petronas Carigali Sdn Bhd.

2005 - 2006 Fabrication of Jacket and Topside for Petronas Carigali Sdn. Bhd (Abu Cluster Project) at Ramunia Fabricator Bhd, Teluk Ramunia Johore, Malaysia.
Appointed as NDT supervisor represented Ramunia Fabricator Bhd Johor Malaysia.

2004 – 2005 Exxonmobil (EMDC) Producing Nigeria Oil (YOHO Topside Modules). Fabrication at Sime Sembcorp Engineering Pasir Gudang, Johore. Saipem.Sa as a main contractor (EPC-2)
Appointed as General Inspector represented Exxonmobil.

2003 – 2004 Exxonmobil (EMDC) Producing Angola Oil (Kizomba-B DrillingRig). Fabrication at Malaysia Shipyard and Engineering Pasir Gudang, Johore.Daewoo of South Korea as a main contractor (EPC-1).
Appointed as a General Inspector represented Exxonmobil.

2002-2003 Fabrication of Bintang-A and B Tripod Jackets and Topsides for EPMI at Sime Sembcorp Engineering Pasir Gudang, Johore.
Fabrication of B11DR-A 6 Legs Jacket for Sarawak Shell Bhd at Sime Sembcorp Engineering Pasir Gudang, Johore.
Fabrication of JNDR-A 6 Legs Jacket for Sarawak Shell Bhd at Sime Sembcorp Engineering Pasir Gudang, Johore.
Fabrication of Tapis-F Tripod Jacket and Topside for aEPMI at Sime Sembcorp Engineering Pasir Gudang, Johore.
Fabrication of B11P-A Topside, Modules, Living Quartes, Bridge and Flare Tower for Sarawak Shell Bhd at Sime Sembcorp PAsir Gudang Johore.
Fabrication of ANDP-C and E Tripod Jackets and Topsides for Petronas Carigali at Sime Sembcorp Pasir Gudang Johore.
Fabrication of YOHO Topside Development Project for Exxonmobil (EMDC) at Sime Sembcorp Engineering Pasir Gudang Johore.
All the above projects work as Ultrasonic Inspector
Represented Sime Sembcorp Engineering Pasir Gudang
Johor, Malaysia.

2001-2001 MTBE Propylene Plant at Kuantan, Pahang. Work as Ultrasonic Inspector on the Annual Shutdown represented MTBE Kuantan Pahang, Malaysia.

2001-2001 Installation of South Furious Barton Compression Module for Sarawak Shell Bhd at Sarawak offshore. Work as Structural QC Inspector represented GLOBAL/TL Offshore.

2000-2000 Fabrication of ANGSI-A Topside, Living Quarters and Modules for Petronas Carigali at Sime Sembcorp Pasir Gudang, Johore.
Work as NDT Coordinator represented Sime Sembcorp Pasir Gudang Johore, Malaysia.

2000-2000 Installation of ANDR-A Platform for Petronas Carigali at Terengganu offshore. Work as General inspector represented Petronas Carigali.

1999-2000 Fabrication of Resak Onshore Gas Terminal for Petronas Carigali at Kerteh Terengganu. Work as NDT Inspector represented Petronas Carigali.

1998-1999 Fabrication of Resak Branang Topside, MSF and Living Quarters for Petronas Carigali at Sime Sembawang Engineering Pasir Gudang, Johore. Work as UT Inspector represented Sime Sembawang Engineering Pasir Gudang Johore, Malaysia.

Fabrication of Anding-A Tripod Jacket and Topside for Petronas Carigali at Malaysia Shipyard and Engineering Pasir Gudang, Johore. Work as UT Inspector represented MSE Malaysia.

1998-1998 Fabrication of Hong Kong Airport Structure at Geahin Engineering Sdn Bhd Malacca. Work as Ultrasonic Inspector represented Geahin Engineering Sdn Bhd.

1996-1998 Fabrication of Container Cranes at Naval Dockyard Lumut, Perak. Work as a 3rd Party Surveyor for Bureau Veritas Kuala Lumpur.

1995-1996 Fabrication of ASME Code Pressure Vessel at Taylor Wharton, Shah Alam Selangor. Work as NDT Coordinator represented Taylor Wharton Shah Alam.

1995-1995 LNG 1 at Bintulu Sarawak Annual Shutdown. Work as Eddy
Current Technician testing Exchanger Tubing.

1994-1995 Fabrication of Seligi C and E Jackets for EPMI at Malaysia Shipyard and Engineering Pasir Gudang, Johore. Work as QC Inspector represented MSE Johore.

1993-1994 Fabrication of M1 Living Quarters for Sarawak Shell Bhd at Promet Fabricator Teluk Ramunia, Johore. Work as Structural QC Inspector represented Promet Fabricator, Malaysia.

1992-1993 Fabrication of Tembungo-A Jacket and Topside for Petronas
Carigali at AY Engineering Teluk Ramunia, Johore. Work as
Training Structural QC Inspector represented AY Engineering.

1991-1992 Fabrication of piping and structural work (spherical tanks) for
Mechmar Keppel Engineering Sdn Bhd at Klang Port Selangor. Work as NDT Trainee (UT,RT and MPI) represented Mechmar Keepel Engineering Sdn Bhd, Malaysia.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6851 to 6900 of 10923)

Go to Search Parameters...

Brief Description

Piping design engineer having 4 experience in ,PDS,CADWORX 2008 AUTOCAD 2008.

Power Engineer 3rd class

run excavator for 7 years also ticketed to run Dozer,Graders,Loaders,Articulated Rock Trucks,Class 1 Drivers Licence and all oilfield tickets

Experience in oilfield constrution including Saftey training filling out required permits for hot work and confiend space as well as bolt up and tank work. Very familiar in all aspects of running flow lines, gas and oil headers systems and maitanence of wells. Great work attitude

I am a highly talented mechanical technician/training coordinator/ instructor & supervisor, able to successfully operate within extremely competitive and high profile markets, drawing upon my excellent communication and interpersonal skills and enthusiastic approach to achieve outstanding results.

M.Tech & Exe. MBA in Oil & Gas domain with 3+yrs exp

Over 18 years' experience in design and construction of water & wastewater treatment projects - industrial & municipal

GIS-Geophysicist/Databse Administrator

A pragmatic and well balanced project manager/engineer with a ‘can-do’ attitude.

During 13 years I was working at rig site on many different wells. I know very well Rig equipment, Drilling tehnology, Mud properties, Fishing, Coring. In many situation I solved stuck, kick and lost circulation problems.

I am a Geophysicist with seven years experience in Petroleum Exploration. Extensive experience working with multidisciplinary teams on exploration, interpretation and prospect generation.Experienced geophysics workstation user.Excellent computer skills and good knowledge of technical software.

I am experienced cased hole engineer

Presently i am incharge of Utlities area consists of Steam Boilers & Turbines. Specialist in all type of watyer treatments plants.

Mechanical engineer looking for job in mechanical field

Diploma in Mechanical Engineeering, Diploma in Materials Management and Diploma in Exports & Imports. Working in a Multinational Company M/s. Chemtex Consulting of India Pvt. Ltd, India Since Apil’ 2004 as Procurement Engineer

Certified Chemical engineer with Masters Degree

over 10 years in the oil and gas industry with experience from FEED to Hook -up and Commissioning in the role of Lead Document Controller

P&ID design draftsman. Very good experience in PDS2D, AutoCAD, AutoPLANT, Smartsketch, Microstation, I/RAS B, AutoLisp, AutoCAD VBA, Scripts etc.

I am M.Tech. in Applied Geophysics from IIT Roorkee. I am working for an OIL COMPANY as a Logging Engineer.

More than 17 years experience in welding inspection and NDT testing. Main duties is to ensure the fabrication meet the requirements of all specifications and procedures.

I’m doing my job with the highest possible efficiency.

Over 7 years of experiences in Project Planning, Project Control, Project Coordination for Oil and Gas Projects, Refinery and Gas Turbine Power Plant ,B.E in Civil Eng.,Certificate course in Primavera Ver . P3, Pe/c Ver.3.5 and Pe/c Ver 5.0,MS Project and MS office applications,AutoCAD 2000

PIPING DESIGNER

Vibration Analyst Level-II certified by BINDT for Condition Monitoring of all Rotating Equipments

Courthouse trained on Section/Township/Range and Metes and Bounds in Kentucky and Indiana. Worked three years in ten counties in Texas completing many types of research in courthouses and abstract plants. In East Texas I have spent about 10 months on various curative projects. Worked as trainer .

8.5 years of experience in Plant layout and Piping Engineering/CAD Administration on Petrochemicals, Refineries and Mining & Metallurgy projects

MSc. Geology with a PGDiploma in GIS and completed a PGDiploma in Petroleum Exploration. 6 months exp.as Trainee Mud Logger.

Power plant operator, experience in operate the compressors, turbine

A Chemical Engineer with 10 years of experience in Procurement in Oil/Gas and Minerals Industry

I have Bachelors Degree in Mechanical Engineering with 18 years Experience India, Middle East and African countries in Oil, Gas sector both onshore and offshore fields.

turbine repair, upgrade, assembly, balance,blading,and machine work

I am a specialist working in the Distillation section, my duty to control and monitor the vacuum column and the atmospheric column.

36 year old gentleman looking for a job as a rigger. I have been in this industry for years, please feel free to contact me if ther is anything more you would like to no about me. Thank you

Experienced Work Over & completions wellsite Supervisor, safety orientated, Well Site Testing, Perforating, CBM Fracing, WIreline, Slickline, Logging, Fishing, Swabbing, Snubbing, Cementing, Coil Tubing, Heli-Portable Supervision, Project Coordinating

Senior EPC/EPCM Manager with +30 years experience of successful multi-disciplined project & program management; successfully organizing, managing and directing large mining, heavy civil and infrastructure projects

drilling Bs, exploraion and production Ms, production optimisation and developement management

MBA/Chemical Engineer with 10 years experience in Oil & Gas plant operation. Expert eperience in commissioning /operation in refinery/petrochemical/Cryogenic LPG terminal/hand on experiance in DCS/quality control/Marketing

MSc Geology Petroleum Geophysicist/Geologist

Over Forty years experience in the oil and gas industry specializing in drilling, work over, and lease construction supervision. Experience in both international and domestic operations in remote and harsh conditions.

Experienced cost controller

Experienced oil/gas/mining/heavy civil project manager. Currently PMT Construction Manager on $8.5 billion dollar project.

I have a strong foundation in Computer Aided Drafting, Pipe Drafting and Design, Mechanical Design-3D Modeling, Solidworks and Inventor.

B.S. Mechanical Engineer. Member of Mechanical Engineer’s Chamber / TURKEY; Qualifications : Bachelor of Science in Mechanical Engineering (University of Anadolu / TURKEY 1980-1984) , Certified Welding Inspector ( CSWIP 3.1, Cert No: 37291, E

Chemical Engineer with 7+ years of experience and possessing commendable skills in operation & control of complex high pressure petrochemical reactions in high capacity LLDPE plant

Senior Condition Monitoring Technician having over Seven years of working experience in data base creation, data acquisition and vibration data analysis of rotating equipment used in Oil and Gas industries

A Singaporean Trained Instrumentation Control Engineer

Process Engineer with exp of FEED & EPC Proj for Refinery, Oil&Gas Plant

Having worked in three countries in industries such as: Printing, Tourism, Piping Fabrication, Oil and Gas construction and erection projects

Specialty in building PZ-7,8,9,11,12,13 pumps total creation of rig and breakdown of rig. Controlled mud weight and every circulation loss chemicals

“Mechanical Maintenance engineer” / “Electrical engineer”

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 [ 138 ] 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out