Resume - I am a consultant working for Devon Energy in the Ft. Worth area and have worked...

Misco Jobs

Resume #81119

CONTACT INFORMATION:
View contact information...

Work History:

2/2008 – 2/2009 Devon Energy

Senior Drilling Superintendent;

Manage day to day operations of five drilling rigs running in the Barnett Shale. Interact with Directional, Mud, Rig superintendents, order casing, Cement and work with land department to insure proper well placement as well as with construction to coordinate locations and ratholes in proper place. Highly involved with HSE and zero accident policies. Work with new consultants to train on DIMS and well reporting procedures and HSE policies. Involved with drilling engineers on planning and executing the drilling of wells with constant communications between both the field and management.

12/2005 – 2-2008 Devon Energy

Senior Drilling Consultant:

Manage day to day activities on land based drilling rig, coordinate cement jobs, run casing, move rig. Work with closed loop drilling system. Manage personnel on rig and drill in the Barnett shale formation utilizing horizontal drilling.
Record for fastest hole in 24 hour reporting period,
Record for fastest hole from spud to KOP.
No LTA's or recordable accidents on rig since taking over rig.

8/2005 –12/2005 Schlumberger Drilling & Measurements

Directional Drilling Coordinator:

Desk Engineer for BHP

Coordinate offshore directional drilling activities and directional tools to location. Plan and execute Deep water drilling from 2500' to 8500' of water utilizing conventional bottom hole assemblies as well as the Rotary Steerable drilling system.

Work Gulf of Mexico from Mustang Island to Green Canyon, East and West Cameron with operations ranging from Barge rigs to Drill ships.

4-2005 to 8-2005 Pathfinder Energy Services

Directional Drilling Coordinator:

Coordinated drilling activities from the Gulf of Mexico to North Dakota.
Planned, executed and drilled Short Radius, Medium Radius and Conventional directional drilling. Involved in all aspects of operations from planning to picking assemblies to drill with and improve drilling environment.
Work with geologist and engineers on a daily basis to optimize drilling conditions and minimize problems.

1998-2005 Calco International L.L.C.

Owner/CEO

Own and operated company since inception. Concentrated on directional drilling everywhere from South Texas to North Dakota and set up operations in Queensland Australia. Managed day to day operations and making sure all tools needed to drill with were on location and drilling operations were maximized to their full potential.

Worked closely with clients to pick rigs, rental companies, and provided limited engineering to maximize cost savings in the drilling of the wells.

Turn keyed and drilled nine straight hole wells and worked as company man on location. Responsible for the complete job from location to running casing.

Calco International L.L.C.

Also turn keyed three horizontal wells in the Fredricksburg formation in East Texas. Contracted everything from location to completion. Worked with engineer on completions and production facilities and set up of tank battery.

Worked as directional driller and company man on high pressure well in East Texas after company man left due to inexperience and high pressure on well. Worked with Richman petroleum to finish drilling well and getting back on track with costs.

1997-1998 Blue Ridge directional
President

Started company and oversaw daily operations and sales from South Texas to Arkansas. Drilled multilateral project in Arkansas in the Smackover formation in southern Arkansas. Drilled and completed over 72 wells using short radius drilling, 55-65 degrees/100' Build Rate.
Worked in South Texas for Killam Oil, Trans Texas, Modern Exploration and Continental Resources drilling horizontal and conventional directional wells.

1994-1997 Anadrill/Schlumberger
Field Service Manager.

Started as directional driller for them and went into the office after nine months in the field as the Directional field manager.

Watched over offshore and land wells and implemented short radius drilling.

Managed all day to day operations and worked closely with client and engineers to productively drill directional wells.

1989-1994 Becfield Drilling Services
North American Drilling Manager

Started as directional driller drilling conventional directional and horizontal wells.
Drilled south Texas to Arkansas using horizontal methods for clients such as UPRC, Citation Oil and Gas, Basin Resources, Modern Exploration, Ultramar Oil and Gas Winn Exploration, Phillips Petroleum to name a few.

Went into the office in November of 1992 and worked as North American Drilling Manager, taking care of 17 Directional jobs a day from South Texas to Canada.
Brought Short radius drilling to the company utilizing 110 degrees/100' builds.

1987-1989 Ensco Technology
Directional Driller

Work on directional wells using conventional directional drilling and horizontal drilling in the chalk.

1981-1987 Computalog Wireline
District Manager

Day to day operations on logging units in South Texas.

1979-1981 Delta Drilling
Roughneck

Education:

September 2008 Global Well Control, BOP School

March 2006 Randy Smith Well Control Bop School

1976-1978 Tyler Junior College Petroleum Technology

1981-1982 University of Texas Correspondence, Petroleum Tech.

1995 Schlumberger North American Star award for outstanding performance
References upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1201 to 1250 of 10923)

Go to Search Parameters...

Brief Description

QA Manager with 23+ years diverse experience

All STCW certificates are valid and available

Water-flooding, reserve estimation, production forecasting, economic & risk analyses, reservoir characterization, tracer & pressure transient analyses. Well surveillance for development opportunities. Some thermal experience. Simulation experience to predict performance & optimize development plans.

Application For Mechanical Inspector/Engineer

Having 14 plus years experience in EPC projects in the area of Construction, Process and Equipments, Installation, Commissioning, Preliminary & Detail engineering & Project Management system, in Oil & Gas, Petrochemical, Chemicals sectors, etc.

Having 20 years of professional experience in various aspects of Detailed Engineering, Pre-bid engineering and Construction supervision & commissioning activities related to Control & Instrumentation (C&I) System for Oil & gas, Refinery, LNG & Petrochemical and power plants.

Petroleum Engineer with 13 years experience in the Oil and Gas Industry with solid knowledge in Geopressure analysis, Well design, MWD operations and rock properties analysis; project management skill (estimating/cost, control/scheduling); bilingual Spanish-English; APEGGA EIT# 92804 and Worldwide.

To obtain a position as Suitable position in process control Instrumentation that allows me to expand my current skill set with technical challenges and career development opportunities to enhance the achievement of corporate goals.

Highly Qualified Draughtsman

Science bachelor degree & safety management diploma and HSE Supervisor Technician with 13 years of experience, Worked for drilling operation, Production operation on offshore and onshore as a HSE technician, advisor and supervisor. Drilling experience as well as driller hand ,Experience managing

A competent & self motivated professional with the ability to work independently and as part of a team within a highly pressured, fast moving environment with 10 years of qualitative and enriching experience in the field of Logistics, Supply Chain, Freight Forwarding, & Operations

An astute, detail-oriented professional who excels under the pressure of time constraints and possesses the determination to always exceed expectations.   Summary of selected Accomplishments responsible for career total of more than 500 placements!

Rock physics, Petrophysics, Quantitative seismic Interpretation, AVO, reservoir modeling, generation of synthetic seismograms

Total Of 16 Years Experience In Drafting And Detailing Of Piping Drawings And Other Drawings In Compliance With The International Standards. Experience Achieved Is In Line Of The Chemical / Petrochemical / Refinery And Connected Utilities Piping Jobs.

Seeking employment as Telecom Engineer in a competitive environment for a position offering challenge, diversity and opportunity for professional advancement, having strong learning aptitude along with analytical and interpersonal skills.

OBJECTIVE: To obtain contract or full time position as a Document Control or Records Administrator and/or other related job.

PDMS mid-level piping designer with a specialty in PDMS DRAFT, Misc. pipe supports, equipment modeling and sloped pipe.

Production/drilling engineer hold Master from IFP; working in Workover operation

Free! Worked as a Drilling Fluids Engineer / Technical Service Coordinator for the past 13 years.

Installation, commissioning, testing & operation of transformers, Power Control Centre, Machine Control Centre Panels

M.Sc with 15 years Laboratory experience in Analytical Lab.

Chief engineer, marine with 14 yrs. of sailing exp.hands on exp. in maintenance of diesel engines,power plants,air conditioining,pumps and turbines.etc.

I am a consultant working for Devon Energy in the Ft. Worth area and have worked for several major oil companies doing directional wells and taking them from start to finish, building locations and put them on production.

Over 30 years as supervisor.

Electrical Engineer

Piping Engineer (PDMS)

PDMS AUtocad 3d Multisteel Civil/Structural Design Draughtsman

I have been described in previous positions as hard working; honest; reliable; a team player and a good communicator. It has been said that I excel in new challenges and I have an excellent work record.I am at present available to take up any position within the cementing or tools in a supervisory

Preparation of FEED & ITB documents (Instrumentation, Telecom & F&G)

Able to plan, organize, and implement complex design projects within prescribed time and budget. Field experience and Construction Representative on major projects. Worked and knowledge of ASME B31.3, API, and ASTM.

Well Test Engineer HP/HT

Industrial Electrician

Piping design and checking:Cadworx, Bentley 3D, Autoplant

Piping Designer - Mechanical / Piping.

Pipefitter Welder/Maintenance Supervisor 20+ years of experience in this field of work. I have had firefighting training as well as inspection training.

I have been in the oil & gas industry for 34 years in working in differenece fields.

I am capable, professional and organized. 19 years service in the engine room on ocean going vessels, including 14 years sailing as Chief Engineer has afforded me the experience and tools to excell in this position.

G&G and engineering data management, MS-Office applications; petroleum software and databases, industry regulations, regulatory form preparations etc.

A result oriented professional with over thirty broad-based years of international experience in the drilling and workover industry. Major strengths in team building, planning, contractual verification, rig design and operational supervision.

I'm a skilled Well Engineer with a wide experience in well construction, stimulations, completions, and workovers. Strong team management and communicational skill with experience to manage the complete well engineering process from well design to drilling execution of exploration projects.

I have had twenty years experience in the Petroleum Industry ranging from Drilling, Production, Completion, and Work-over engineering in all types and configurations of wells and drilling units/production platforms both onshore as well as offshore. I have worked in Canada, Saudi Arabia and Thailand.

CFO & Treasurer - publicly traded oil & gas & mining company

20+ years in offshore engineering; including marine, structural, pipeline, and project engineering

About 25 years of Process Engineering experience including fifteen years with EPC companies in the Arabian Gulf states in the Oil & Gas industry.

An innovative and seasoned Marketing professional with expertise in consultative sales and marketing, strategic planning, brand management, market research, sourcing, procurement, supply chain and logistics, and with 20 years of successful progressive experience in all phases of market consulting.

Project management. Construction management.

Dear Sir, I have 21 yrs Exp in a petroleum laboratory as a Sr lab Chemist having knowledge of testing all petroleum products, petrochemicals based on ASTM/IP/BIS methods, handling auto instruments aware about fire and safety rules and regulations.

Sr. Rotating Equipment Engineer with 20years experience in Turbo-compressors up to 42 MW rating of Refinery, Petrochemicals & Ammonia Plants. In depth experience in troubleshooting, maintenance/major overhauling/modifications, failure analysis, condition monitoring and vibration analysis

Backround in Electrical Engineering/Design with emphasis of Project Management, Production/Manufacturing with more than 15 years experience in Electrical Design/Construction work and familiar with Standards Procedures as well as with the Industry standards such as ANSI, API, NEC, etc

Application for the Post of " Oil Rig Doctor " (Medical Officer/ Doctor/ Occupational Health Consultant / QHSE Rep./ Medical Advisor). (With On & Off Rotation Duty Cycle). (Offshore &/or Onshore).

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 [ 25 ] 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out