Resume - I have 4 year of plant operator experience. I hold a valid 4th class power engin...

Misco Jobs

Resume #81164

CONTACT INFORMATION:
View contact information...

Highlights of Qualification

* Ability to work under pressure and handle multiple tasks
* Work well independently and as a team member
* Polite, respectful and courteous mannered
* Provide a safe working environment for the company and fellow workers

Education

2001 4th Class Power Engineer Certificate / Completed half of 3rd Class
Portage College, Lac La Biche, Alberta
1999 Grade 12 Diploma
Father Patrick Mercredi High School, Fort McMurray, Alberta

Work History

June 28th, 2007 to Oct 22, 2008
Syncrude Canada
Process Operator
* Part of the Hydroprocessing environmental team in secondary upgrading
* Qualified to operate sour water stripper
* Qualified to Operate sulfur recovery unit
* Mentoring new operators out of school and those from other units to become post qualified. Provided new operators with proper understanding of dangers and expectations from their employer. Share all knowledge to make new operators know how to control normal plant conditions and upsets.
* Have training in Amine recovery units
* Many plant upsets that with sour gases and reacted in safe manner to properly and cost effectively resolve.
* Operated waste heat recovery boiler at 350psi. Daily water test to control pH, hardness, and sufficient amount of phosphates are in boiler feed water. * Have done plant shutdown's for mechanical maintenance and chemical cleaning of vessels and pipping to which are exposed to sour gases such as ammonia and H2S.
* Respond to fires caused by sulfur. React quickly within safe conditions to control and stifle fire if able to safely.
* Sour leaks due to blow out of pump seals which require SCBA and assistance to locate and control/stop leak.
* Safety table talks/ Field Scenarios to give understanding to alarms, equipment failure and poor conditions which some operators have yet to be involved with. This helps to have operators alert to act quickly when needed within unfamiliar emergencies.
* Provide clear communication with control personal and management through radio contact.
* Worked with engineers to propose safe work plan documentation to management.

Oct 18th, 2003 to Mar 1st, 2006
Japan Canada Oil Sands
Process Operator
* Operation of once through steam generator
* Generation of high pressure and low pressure steam
* Operation of a Warm Caustic Reactor and Hot Lime Softener to treat recovered water for boiler use. Control Ph, hardness, and silica levels in water.
* Have regenerated weak acid cation units on a regular bases.
* Receive shipments and handle for use of chemicals such as Caustic, Acid, Soda Ash, Magox, lime and polymer
* Ensure oil quality meets required standards for sale
* Process product oil extracted from the ground to sales tanks
* Maintain the first vital steps in water recovery
* Did plant shutdown's and start ups
* Experience with Well start up and upsets
* Ensure to maintain a balance of chemicals to properly and efficiently separate recovered water out of the bitumen before further treatment is done.

* Nov 4th, 2002 to Feb 28th, 2003
Alcor Management
Sr. Building Operator
* Daily boiler checks on hot water boilers for the truck shop where heavy haulers and other heavy equipment are assembled for use.
* Make sure all glycol temps are normal for the heating of the truck bay floors
* Maintain the pressure, temperature, and air circulation in the truck shop
* Do building checks around site for unaware deficiencies
* Complete work orders as needed for other contractors
* Trouble shoot furnace problems

Training/ Certificates
C.S.T.S

(References available upon request)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5651 to 5700 of 10926)

Go to Search Parameters...

Brief Description

Graduate Mechanical Engineer+ SAP AG MM certified consultant 11 years of experience in a leading Chemical Fertilizer industry as Piping erection / Project, Maintenance and Materials Engineer

Mechanical Engineer,17 years experience in: Piping Design,Sup. Construction, Pre-commissioning and start up for Deshydrat. crude oil/Gas Plant; Surface/on land Facility Engineer. Handle of norms Ansi/Asme/Api. Hydrostatic and Welding Test. Aws Member.

Master of Science degree in Petroleum Engineering from Texas A&M University and Bachelor of Science degree in Mechanical Engineering from Universidad de Oriente (Venezuela) with over seven years of experience in a major oil/gas company.

Professional manager with 10+ years experience and Russian native language is looking for challenging position in general administration, finance, sales or marketing.

•Strong Knowledge of CIS and Western manufactured oilfield related equipment and OCTG markets, policies and regulations, standards, international trade and marketing techniques. •CIS and Western O&G industry related connections •Fluency and literacy in English and Russian. •Computer literate

Geoscientist with 8 years of experience working in different phases of exploration, delineation and development projects in Venezuela onshore and offshore areas with a major oil company. Master degree in geophysics from Stanford University. Effective communication skills in English and Spanish.

Sr. Drilling engineer - 8 years working experience - MS in Petroleum engineer - - Industrial engineer degree -

Production Technologist with 11+ years experience, expert in Field Development Planning/Implementation), Well Designs, Drilling/Workover, Productivity Enhancements-simulation/Water Shut-off etc., Production Optimization, Well Surveillance, Sand Prediction/Control, Artificial Lift etc.

Experienced directional driller with 26 years drilling rig experience seeking new opportunities.

22 years experience of which 12 years with in the oil sector where I had to Implement systems, overseeing accounting and carrying internal auditing missions, Significant experience in start up process, J.V. management, Fluent in English, French and Arabic.

Seasoned Drilling Sup't - Onshore - with 15 years experience as a Drilling Sup't. 20 years of international experience. 18 years in the Middle East. A logical and systematic problem solver. A cooperative and friendly colleague. English is my mother tongue, but also moderately fluent in French.

Mechanical Engineer with 11 years experience. Skills on corrosion and production engineering. Corrosion engineering experience includes: chemical treatment, NDT and corrosion monitoring. Production engineering experience involves beam pumped, PCP and gas lift wells production optimization.

A dedicated professional with excellent technical, management and inspection skills. I maintain strong supervision, training and motivation abilities. Acknowledged as a dynamic performer with a high level of initiative and commitment to quality. A team player with superb communication skills.

Global HSE Manager

11 years covered in Oil and Gas Plants Instructed as an Instrument technician with theoretical knowledge and practicing on equipments for measurement and control systems from electrical to pneumatic or hydraulic circuits. Worked for big companies: AGIP & SONATRACH (from commissioning to start up)

Production Operator with 6 yrs exp in Petrochemical,Oil & Gas fields

I am an Indian currently employed as HSE Officer with Deutsche Babcock UAE for their DEWA project Jabel Ali. I have more than 3 years of full time work experience. I believe that the skills I have acquired in my professional experience and education will be valuable asset for your organization.

Electrical / Instrumentation Controls Designer with Intools, Autocad, & Microstation

2009 ASME B31.3 Piping Process by DAP Cosultan Jakarta

Instrumentation Engineer looking for a career in the Oil & Gas Industry

Operations Manager with 13+ years oil and gas experience. Experience in operations, Hr issues, Safety, contracts, budgets etc. Vast experience in Wireline, Slickline, braided line, electric line, coil tubing & completions/workovers. Exp in jackups, drilling boats, fixed platforms & land rigs.

Sr. E&I designer with over 20 years field engineering experience. US & Canadian citizen/

quality control tech.

MOTORMAN OR CRANE OPERATOR

Experienced in all aspects of the following: -

VISUAL INSPECTION : welding, monitoring,.. --- NDC: Cofrend level II PENETRANT TESTING ...

I am a hardworking Safety Officer/HSE Officer and serious about the my job in a way of performing it.

I am graduate of Cairo University with Bsc. From the faulty of science, geophysics department. I completed an intensive business English and computer course, which sharpened my skills and qualifications. And l had sales courses and communication skills courses from Dale Carnegie Training.

CSWIP 3.1 certified as Welding Inspector. My certificate number: 40083 valid until: 19 April 2014.

I have valid IWCF Well Control, Sea Survival Certificate, Fire Fighting, and H2S. I am self-motivated and willing to work hard, pro active, have a good interpersonal communication skill, good leader ship and I can work individually or in team

HSE Engineer-a good educated, skilled and experienced individual on construction, fire protection and safety operations aspects, attained from exposure in different industry, hard working individually and in team, friendly and outgoing, self-motivated and well- organized

Computer Proficiencies

I have 4 year of plant operator experience. I hold a valid 4th class power engineering certificate with part A of the third class conplete. I have SAGD and upgrading refinery experience which gave me amounts of skills required in this field of work.

Final year Bsc. Petroleum Engineering student at the University of Trinidad & Tobago. Worked as a Lab technician testing oil & water based muds@ Bariod Trinidad services

I have 10 years in the food industry

I have been in the Oil Field for 7 years. I have worked as a Derrick Hand, Centrifuge Tech and a Mud Engineer. I have a very good understanding of drilling fluids and drilling operations. I am easy to get along with and I have positively influenced all the companies I have worked for.

I am a hard working, friendly, and loyal individual. I strive to learn new things, and am always up to the challenge of the ever changing oil and gas industry. I have been a Coiled Tubing Supervisor with Halliburton for 7 years.

Welder GTAW-SMAW: SS, CS, And Duplex SS. ASME IX – MIGAS, Safety training (MSTS) combined sea survival, fire fighting & first aid.

I am qualified as a drilling fluids engineer. I have been employed with Baroid Trinidad Services Ltd a member of the Halliburton family.

B.Eng Mechanical Engineering SKILLS: Numerical skills Information Technology skills Logical and Analytical skills.

I am computer literate, possess good interpersonal and communication skills, available for team work and always have the zeal to achieve whatever goals set

Decisive, result-oriented professional offering 7 years of experience in Mechanical, Electrical & Civil Industry.

COMPUTER SKILLS

Working experience of 1-year 2-months in Electrical Industry . In which, having experiance of 6-months as Electrical Design Engineer in an EPC company handling the projects of substation designing belongs to the chemical,metal &fertilizer process industries.BE/Bsc Electrical engineer. 4-year degree

Drill Equipments/Systems. Crane Electrical Systems Plant Process Equipments. Effluent plant. Generators Control Systems. Transforming Systems. Jacking Systems. Winching Systems. Air Condition and Refrigeration Systems. Intercommunication Equipment. Power Generators. Health & Safety at Work Act. Comp

Lease Anaylst

API, CSW, CWB QA/QC inspector willing to travel

DIPLOMA + B.E IN ELECTRICAL ENGINEERING + GULF EXPERIENCE Seek a position in Electrical Applications that provides the opportunity to make a strong contribution to organization goals through continued development of professional skills.

Operating rubber tire backhoes-trackhoes-and dozers as well many years.

To put my best possible efforts by applying my professional qualification and expertise in order to enhance the image of the organization in which I am working

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 [ 114 ] 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out