Resume - Planning of all the activities of Major and Minor inspection of conventional ste...

Misco Jobs

Resume #81360

CONTACT INFORMATION:
View contact information...

Objective
Require to obtain a challenging position as a Maintenance Engineer in power generation where I can utilize my extensive experience and skills effectively in a reputed organization with a healthy working environment which enables a clear objective, development and appreciate quality work.

Highlights of Qualifications
* 14 years experience as a Maintenance Engineer
* Highly skilled in repairs and troubleshooting of various equipments associated with large fossil fuel fired thermal power stations.
* Highly skilled in planning projects and ensuring targets and budgets are met on time.
* Good skill in Ms. Office and Internet Browsing; Knowledge of computerized planning Maintenance system (Maximo and Orion).
* Professional work ethic and good team leader.

Employment Skills & Experience
Maintenance and Troubleshooting
* Complete and partial overhauling of 210 Mw TCDF, Hitachi steam turbine, 75 Mw Franco Toshi and 68 Mw pass out Steam turbines.
* Inspection, periodical maintenance and overhauling of Boiler feed pumps having capacity up to 400 tons/hr at 150 bars, Condensate extraction pumps, large capacity Mixed flow pumps and rotary water sealed vacuum pumps.
* Inspection, periodical maintenance and overhauling of double acting two stage, Vee block instrument and service air compressors.
* Tube leak detection and consequent repair in HP heaters, LP heaters, Condenser and auxiliary coolers etc.
* Routine and shutdown maintenance of 680-tons/hr Water tube Boilers and their auxiliaries.
* Inspection of boiler drum internals and repair, soot blowing system, forced draft fans, gas recirculation fans, boiler firing equipment and setting and safety valves floating checks of drum and super heater safety valves and Electromagnetic relief valves.
* Review of failure reports in Maximo, analyze the requested jobs, identify priorities, allocate work to subordinates and follow up execution.
* Review of the progress of defect correction, breakdown maintenance and lubrication work. Analyze the observations during these works and plan subsequent action.
* Report to / discuss with Concerned Manager on rescheduling of work or plant shut downs for planned and emergency corrective action.
* Analyze data obtained from defects correction, breakdown maintenance, check the type of failure and plan action in consultation with Concerned Manager.
* Coordinate with other departments as required in executing the defect correction and arrangement of support services from other agencies.
* Procurement planning and follow up action in coordination with purchase department regarding general consumables, spares and proprietary items from OEM.
* Strategic Planning for the procurement of necessary spares for next 5 years according to RLA (Residual Life Assessment) of plant equipment.
* Preparation of overhauling reports, defect root cause analysis reports and ensure safety disposal of general and hazardous waste and local municipality procedures and laws.
* Conduct tool box talk for all the activities before proceedings, assessment of safety risk involved and ensure related safety measures.
* Preparation of Risk Assessment of all the maintenance activities and review of these reports annually or after an accident.
Operations Activities
* Provide technical assistance to the owner in all corporate agreements including OMA, PPA and FSA
* Update the routine database and analyzing the trends including the performance trend, load forecasting and fuel consumption & ordering.
* Coordinate and support maintenance and performance department of O&M contractor for measures to be taken for improving plant performance.
* Review of plant systems betterment proposals/modifications submitted by O&M contractor for improving safety, reliability and availability of the plant.

Planning /Organizational Skills
* Planning of all the activities of Major and Minor inspection of conventional steam turbine of various capacities from shut down to start up and over speed testing.
* Planning, scheduling, supervision and execution of rehabilitation work Re heater Coils of unit # 1 & 2 and Ljungstrom Air Pre heater of unit # 1 at Bin Qasim Power Station (210x6 Mw) in supervision of Babcock Hitachi and ABB experts according to the specified procedures and standards provided by the manufacture.
* Planning, scheduling and execution of chemical cleaning of 680 t/hrs capacity boilers in supervision of M/s Halliburton Ltd.
* Associated with NESPAK Consulting Engineers for the erection and commissioning of Bin Qasim Thermal Power Station Ext. # 6 project, as Owner's Representative.
* Planning, scheduling and supervision of erection and commissioning activities of 210 Mw steam turbine, 680 tons/hr steam generator and their auxiliary equipments.

Employment History

Engineer Mechanical Maintenance 2005- To date
Dubai Water and Electricity Authority
Assistant Manager Operations 2005-2005
The Hub Power Company Ltd
Maintenance Engineer Mechanical 1992-2004
Karachi Electric Supply Corporation
Mechanical Engineer 1989-1991
Mohammad Din Containers (Manufacturers of Aluminum Collapsible Tubes)

Education and Training
Bachelor in Mechanical Engineering 1988
N.E.D University of Engg & Tech Karachi, Pakistan.
One year Apprentice ship Training in Mechanical Maintenance (Assistant Engineer) 1991-1992
Karachi Electric Supply Corporation at 210x6 Mw Bin Qasim Power Station.
Turbine, Generator and Auxiliaries, operation & maintenance and control system. 1997
Hitachi Works for Bin Qasim Power Station Ext#6.
Certificate of Completion (Familiarization Program) 1998
Black and Veatch International at Bin Qasim Power Station Ext#6.
Process Safety Management 2005
The Environmental Management Consultant; Karachi, Pakistan
Risk Assessment Training from Occupational Health & Safety Section 2007
Dubai Water and Electricity Authority, Dubai.
High Performance Leadership and Team Building 2008
By Dr. Mahmood Khan (TLPE, ICT International/ TEXPO)
First Aid Certificate for Appointed Person
From First Security Group Health & Safety Division, Dubai 2008

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 951 to 1000 of 10816)

Go to Search Parameters...

Brief Description

Results-driven Senior Level UNIX/Linux Systems Administrator/Systems Engineer with broad-based experience in oil and gas, banking and government agencies. Accomplished professional who has an extensive history in the installation, troubleshooting, support and development of oil and gas apps.

I provide professional pipeline engineering skills for the owner firms

HSE Management / HSE Adviser. HSE management of Contractors... EPC Construction & Commissioning... On-shore, Off-shore Rig / platform experience / Hook-ups, shutdowns... Senior Fire Training Officer... Mech.Eng

Multifaceted, driven, and highly motivated professional seeks a Senior Level Drilling Engineering position in a dynamic and high-paced environment.

Worked in IMECO (International Mechanical & Electrical Company) UAE as a Asset Management Specialist to manage & controlled Electro-Mechanical Data using by Maximo. Provide data on-time as per the requirement of the Departments, users & Oil Companies.

15+ years of IT experience and 6 years of SAP BWv7 and SAP R/3 ABAP experience. I would like to introduce myself as a Consultant, having an Attitude & Aptitude for Analysis, with range of skills in Technical arena. I do have solid Experience in Conceptualizing, Developing.

Logging geologist / data engineer 12year experience offshore - interested in offshore Geologist or Night Drilling Supervisor positions.

Through my current work experience (+10 years) in the oil & gas, I have gained the necessary fields operations, production and troubleshooting skills and I feel confident in my ability to accurately assess technical problems and develop effective solutions.

10 years experience Piping Engineering including Stress Analysis of piping connected to vessels, pumps, compressors, exchangers, psv’s/ flare lines; prepared piping layouts and material specifications; carried out check/ analysis for flanges, trunnions, and nozzle allowable; prepared specifications

15 years of document control experience in oil and gas industry working with both EPC contractor and client. Several years of management and supervisory experience with teams of up to 100. Proficient use of various EDMS systems including Livelink, AxioM, Convero, Documentum, Microsoft

Strong background experience (19 years) in petroleum engineering, optimizing oil & gas fields, plants operations and gathering systems. Leading operation team in planning and monitoring production activities

Analyze requests for contracts initiation and develop contracts packages, set and recommend qualification / evaluation criteria and negotiation strategies and attend the same, coordinate and advise users Divisions on contractual and commercial matters.

I am currently working as Principle Process Specialist for Worley Parsons MEG, Calgary. I have more than twenty-four (24) years of experience in process design, conceptual studies and operations, for oil and gas projects (both onshore and offshore), petroleum refineries and petrochemical complexes.

I have over 20 years of hands-on experience in the information technology industry with the last 5 years spent managing a staff of 50+ Project Managers, programmers, analysts, Oracle DBAs with an annual budget of over $10 million.

Land Manager / Land Administrator

Chemical Engineer with 16 years petrochemical and commissioninig experience

CSWIP Senior Welding Inspector BG Grade 2 Painting Inspector NDT ASNT Level 2

Using Eclipse Simulator for history match and prediction of oil and gas reservoirs.

Reservoir Engineer,18 years of experience from Condensate to Heavy oil fields, over 4300 hours of intensive petroleum training. Extensive experience as Integrated Team Leader. Extensive experience with Single and Multilateral Horizontal wells in Heavy Oil field. Simulation, planning experience.

Having more than 14 years experience in Welding Inspections, , construction, fabrication, installation, commissioning in QA/QC Multidiscipline field as TPI or clients representative of Major Projects in the heavy construction industry including, onshore & offshore. Petrochemicals Facilities, Fertili

Tertiary Qualification in HSE disciplines,15 years Oil & Gas and Mining Industry and Exploration experience at senior,Supervision of safety functions in an operational environment. Implementation and on going development of the Site Health and Safety Management Plan..

11 yrs Experience in Construction - Inspection Fields

23 years oil and gas experience. 10 years experiecne as HSE Advisor / RSTC

Production Supervisor

Seeking to find a challenging position in the oil and gas industry as a Gas Plant Operator within a company that offers me the possibility to use my experience to best serve the needs of the company, improve its bottom line profitability and efficiency. Over 22 Years of Experience

Master Electrician

25 years expereinced project manager / construction manager, project cost control, pipeline and facilities, expereinced in pipeline inspection, facility inspection, non destructive techniques, ASME and CSA. Expereinced in Gas and Oil, responsibility groups of 70 or more inspectors / construction

diploma in chemical technology

I am diploma in Chemical Engineering. I have more than 25 years of experience as a process field and panel operator.

Currently I am Mechanical Technician in the oilfields in Sudan also have many years of experience as maintenance supervisor.

PDMS Structural Designer Offshore Experience

CFS-CV

I worked in Aker Shipyards Braila in Hull Design Department as ship designer. I was involved in several projects on making of hull structure drawings, workshop drawings, lines faring for different types of maritime vessels built in shipyards: cargo vessels, supply vessels, RO-RO, container vessels,

Free! 20 years experience in Control Systems design and drafting. Industries include: Refining, Petrochemicals, Pharmaceuticals, and Brewery. Working knowledge of AutoCad MicroStation, Microsoft Excel & Access, PDS modeling, SmartPlant P&ID, SmartPlant Instrumentation (INtools) and SmartPlant 3D.

Hungarian chief rig mechanic with 30 years experience

Twenty-Nine (29) years of experience, working under various international companies in Middle East, Europe and in South East Asia countries.

My career objective is to become an integral part of a team involved in oil and gas exploration where I can use my problem solving skills and creative abilities to meet challenges and contribute to a dynamic organization.

Experienced Materials coordinator

HSE manager . qualfication . diploma of HSE engineer , osha qualified

A diversified and experienced individual seeking opportunity in mechanical engineering / management support or related field.

Planning of all the activities of Major and Minor inspection of conventional steam turbine of various capacities from shut down to start up and over speed testing.

development of process flow diagram (PFD) and P&IDs, equipment sizing & preparation of datasheet, heat and material balance, simulation on HYSYS, process improvement, Hazop Reviews, line hydraulics, debottleknecking to improve plant performance, commissioning and pre-commissioning activities.

Fabrication , construction , in-service inspection , repair, alteration and rating activities for pressure vessels , pressure relieving devices , steel storage tanks built to API 510, ASME section VIII div 1,

B.E.-Chemical with 9 years of Commissioning and Operation Experience in Ammonia Plants; 6 years of Project Management experience & 4 years of Process Engineering experience in Fertiliser Project

PLAN SUPERINTENDENT,PLANT MANAGER.SHUTDOWN MANAGER,MAINTENANCESUPRINTENDENT.TECHNICAL CONSULTANT.COMMISSIONG ENGINEER

Highly experienced in project engineering management

I have experiences in Oil and Gas International Company in Exploration, Development and Cross Function Team Departments for 26 years in Indonesia with the latest position is Geoscience Analyst. I am expert on DAta base Administrator for Well dar, seismic and petrolog data

Document Controller,Scheduler (Primavera P3), Programmer (FoxPro), Administrative Assistant

Diploma In Civil Structural Engineering, Designer, Detail Engineering, FEED,Oil and Gas, EPC, PDMS, PDMS DRAFT, ACAD, Microstation, Review Reality, Terramodel, Windows (MS word, MS Excel & MS PowerPoint) on Windows NT & 2000 Novell environment

Core Negotiator & Timely & Quality Conscious Buyer

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 [ 20 ] 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out