Resume - Project engineering and management, electrical and process engineering, project ...

Misco Jobs

Resume #81437

CONTACT INFORMATION:
View contact information...

BIRTHDATE: 04 December 1958
MARITAL STATUS: Single
HEALTH: Excellent, non-smoker
PASSPORT: Canadian
EDUCATION: 1982 University of Calgary, Canada - BSc Electrical Engineering
1984 University of Calgary, Canada - MEng Electrical Engineering
MEMBERSHIPS / AFFILIATIONS: Association of Professional Engineers, Geologists and Geophysicists of Alberta (APEGGA), Canada: P. Eng. (Professional Engineer) since 1984
Institute of Electrical and Electronic Engineers (IEEE): Member since 1980, was Chairman of the Southern Alberta Section (Canada) for 2 years
LANGUAGES: Fluent in English and Russian (written and spoken), excellent knowledge of technical electrical and instrumentation terminology; often leads technical and business meetings in Russian.

KEY WORDS:
Project engineering and management, electrical and process engineering, project cost control and schedule, business development, electrical network simulation (ETAP), renewable energy projects; variable frequency drives, power generation equipment, transmission line and substation design, relay protection studies, soviet design standards, Russian speaking, technical translations, oil & gas, minerals and metals, FEED (front-end engineering design), drawing procedures, mentoring Russian-speaking engineers.

CAREER HISTORY
WORLEYPARSONS, KAZAKHSTAN
JAN '08 – PRESENT General Manager, Almaty Branch Office
* Reports directly to the in-country President; supports business development and tender activities in the Power Generation, Infrastructure and Minerals and Metals sectors; supports on-going work with gold and copper mines (Kazakhmys) including an alliance venture, uranium mines (Inkai), borates and potash mine (Satbor); responsible for the daily operation of the Almaty branch office including HR issues, visas and work permits; involved with pre-contract and corporate activities in Kazakhstan.
AUG '07 – DEC '07 Project Manager, Electrical / Power Division, Acting General Manager, Almaty Branch Office
* In the capacity of Project Manager, responsible for Client co-ordination, interfacing and communication of project objectives, preparation draft CTRs (cost time resources) for engineering review and development, develop and monitor agreed project execution plans; direct cost and planning engineers relating to project issues; collated and developed several bid proposals, identify, monitor and communicate critical path activities, interface with lead engineers relating to day to day project engineering issues, collating and developing project status reports, monitoring project growth, monitor project budget, monitor compliance to contract, supervise accounting relating to project issues, develop and issue weekly and monthly project reports as required by the client and internally, progress required information from Client, co-ordinate logistics for client meetings and surveys, review Client comments and approval on issued documents, collate project close out reports, compile and issue lessons learned reports. Presently, four projects are being managed.
* Acting General Manager supports business development in Power Generation and Minerals and Metals sectors.
KPO B.V., AKSAI, KAZAKHSTAN (KARACHAGANAK FIELD DEVELOPMENT PROJECT)
Karachaganak Petroleum Operating B.V. (KPO) is a 40 year joint venture between British Gas, AGIP, Chevron and Lukoil to develop the Karachaganak field (located in north-eastern Kazakhstan) which is estimated to contain 1.2 billion tonnes of oil and condensate and 1.35 trillion m3 of gas. The field pressure is 460 bar and contains 4% H2S.
JUN '05 - JUL '07 Project Engineer, Debottlenecking Project, Engineering and Project Management Department
* Project budget: $100 million to end of 2007. Project scope is to de-bottleneck all aspects of the production facilities (two processing plants, sour gas re-injection station and all gathering, trunk and export pipelines) to increase overall capacity to 110% at 95% availability. Main scopes included detailed process simulations (HYSYS and PIPESYM), DCS control system optimisation (Honeywell) and power system modelling and optimisation studies (ETAP). Updating P&IDs, PDFs, preparation of detailed purchase requisitions (heat exchangers, replacement trays for process columns, large diameter high pressure line pipe, valves, pig traps) and contract preparation for vendor representatives and specialised process engineering studies. Reports with recommendations were submitted for management approval for FEED and detailed design using external engineering companies. Responsible for project budget, schedule, reporting, inter-discipline coordination and liaison with external engineering contractors.
AGIP KCO (KAZ. NORTH CASPIAN OPERATING CO.), ALMATY, KAZAKHSTAN (KASHAGAN FIELD DEVEL. PROJECT)
Kashagan is a 40 year joint venture between AGIP, the Government of Kazakhstan and various other partners to develop the super-giant Kashagan field (located 80km offshore in the Caspian Sea) which is estimated to contain 13 billion tonnes of oil. The field pressure is 900 bar and contains 20% H2S.
AUG '04 - MAY '05 Project Engineer / Lead Electrical Engineer, Execution Contractor Management Team (ECMT)
* the initial phase of the onshore project concerns the design of the power generation station for the offshore oil field; generation capacity is 245MW @ 40C and will provided by five GE Frame 6B gas turbines and two Nuovo Pignone steam turbines.
* chair and minute weekly progress meetings with the Execution Contractor (EC) and ECMT representatives of the engineering disciplines, track, check and consolidate comments on EC-produced drawings from all engineering disciplines, ensure the timely input of such comments into the web-based document control system, track and resolve in a timely manner all Technical Queries, Change Notices and Company Instructions associated with the detailed design of the power station. Participated in HAZOPs of the Power Station.
* provide technical support to the ECMT during execution of the work; manage, supervise and co-ordinate the execution and approval of the detailed design by the EC; manage the engineering interfaces with AGIP KCO, Kashagan Development Project Contractors (KDPC), third parties and other Package Management Teams.
RTG GROUP, MOSCOW, RUSSIA
APR '04 - AUG '04 Operations Director
* interviewed and recruited senior Russian engineers and translators for oil and gas projects in Russia; worked with representatives of Shell, TNK-BP, Caspian Pipeline Consortium (CPC); prepared tender documents and personnel contracts in two languages.
TENGIZCHEVROIL LTD JOINT VENTURE, TENGIZ, KAZAKHSTAN (TENGIZ FIELD DEVELOPMENT PROJECT)
Tengizchevroil is a 40 year joint venture between Chevron, ExxonMobil, LukArco and the Government of Kazakhstan to develop the giant Tengiz oilfield (located on the northeast shore of the Caspian Sea) which is estimated to contain 25 billion barrels of oil. The field pressure is 800 bar and contains 18% H2S.
JAN '97 - MAR '04 Lead Electrical Project Engineer, Facilities Engineering Group
* front-end design and studies for various capital projects; scope definition, preparation of schedules, man-hour estimates, budgets, AFE preparation, regulatory issues, Russian language translations, fault studies, relay coordination studies, bid evaluations, supervision of local and expatriate engineers and designers.
* project detailed design (all in-house, no outsourcing): crude rail loading facility, crude stabilisation/vapour recovery systems, 35kV overhead lines and substations for new Korolev field development projects ($17 million), design and installation of 4 pre-owned GE Frame 6 (32MW) gas turbine generators ($42 million), sulphur storage and handling facilities, expansion of two 10kV 15MVA substations in existing plant ($10 million), plant power management system, replacement of existing 120MVA 110/10kV soviet-built substation ($30 million), 1600kVA emergency black start diesel generator, design and installation of new 52MVA GE Frame 6 gas turbine generator set ($26 million).
* project engineering: 35kV overhead power lines and substations for new construction camp ($10 million), construction power supply (double circuit 10kV) power lines to Second Generation Plant (SGP) and Laydown area for Contractors ($3 million), expansion of 110kV switchyard for interconnection to Second Generation Plant (SGP) site ($5 million).
JUL '93 - DEC '96 Lead Electrical Engineer, Plant Operations/Capital Projects Group, EI&C Group
* responsible for electrical and instrumentation estimates, specifications, design and start-up of projects within the refinery, DMC (Demercaptanisation) and off-plots areas; primarily retrofits and improvements to existing facilities; also involved with computer modelling and electronic metering of the plant power system.
* design and field engineering duties for Infrastructure projects, oil processing plant, LPG and sulphur plant expansion, export shipping pumps, caustic incinerator, air plant, firewater system, DMC plant; duties included detailed electrical design, work scopes, specifications, start-up, liaison and supervision of Contractors, preparation of as-built drawings and related documentation for handover to Operations Group.
INTERNATIONAL BECHTEL INC - AHMADI, KUWAIT (IRAQI WAR RECONSTRUCTION PROJECT)
MAY '92 - JUL '93 Lead Electrical Engineer, Al-Tameer / Major Projects Group
* modelled entire Kuwait Oil Company power distribution system (over 500 buses), including over current relay coordination and fault/load flow studies based on collected field data; used CAPTOR and ETAP programmes; provided reports, recommendations and cost estimates to upgrade relay protection systems and re-configure electrical systems.
* as part of the reconstruction effort, assigned duties were electrical design, work scopes, specifications for 20 existing oil gathering centres, 4 desalting facilities and 2 gas booster stations; field engineering duties included preparation of damage assessment reports, relay calibration, commissioning and start-up, supervision of commissioning teams.
RINDT ENGINEERING SERVICES LTD - CALGARY, CANADA
FEB '92 - MAY '92 * Energy Management Specialist: performed several harmonic resonance, power factor correction and variable frequency drive feasibility studies and corresponding economic evaluations; conducted seminars on similar topics.
DELTA PROJECTS INC - CALGARY, CANADA
JAN '91 - FEB '92 Senior Electrical Engineer, Power and Control Systems
* computer simulation of load flow, fault, large motor starting and power system harmonic studies for four major projects: two Co-generation projects (70 and 110MW) in Ontario; 40MW Dow Chemical ethylene plant in Fort Saskatchewan, Alta; 25MW Shell gas and sulphur plant in Caroline, Alta.
* design of PLC control system for third train of Amoco Canada Empress Gas Compressor Station; design of electrical system retrofit (2.4kV to 4.16kV) at Amoco Canada East Edmonton Pump Station.
PEACE PIPE LINE LTD - CALGARY, CANADA
Peace Pipe Line operates over 2000km of hydrocarbon liquids pipelines and is able to transport crude oil, NGL, propane, ethane and butane using a batching system through common pipelines. Gathering and pumping systems are remotely controlled over a microwave system from a central control location using RTU, radio and PLC equipment.
APR '88 - JAN '91 Electrical and Instrumentation Engineer, Pipelines and Pump Stations
* Duties included protective device coordination and calibration, PLC configuration and programming, specification of electrical and instrumentation equipment, preparation of bid documents and project estimates, preparation of detailed electrical and instrumentation designs for new and retrofitted pump stations and LACT units including single line diagrams, schematics, wiring diagrams, cable schedules, control panels and switchgear layouts, ladder logic diagrams.
WESTINGHOUSE CANADA INC – INDUSTRY SERVICE DIVISION, CALGARY, CANADA
1985 - 1988 Energy Management Specialist
* performed load research studies and load shedding schemes; power system harmonic studies on systems to 69kV (Westar Mining open pit coal mine); solving power system resonance problems; successful application of capacitors in harmonic environments; project conception to job completion including data gathering, presentation, design, specification, subcontracts, commissioning and start-up.
* provided numerous detailed reports and recommendations to customers; conducted educational presentations and seminars.
1982 - 1985 Commissioning Engineer
* duties included thorough testing, commissioning and start-up of new electrical facilities and maintenance testing of existing facilities; became proficient at coordination and setup of all types of relays, both electromechanical and solid state.
Computer Literacy Microsoft Office, Microsoft Project, ETAP (power system analysis), CAPTOR (relay protection)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1501 to 1550 of 10902)

Go to Search Parameters...

Brief Description

Petroleum Engineer with over 15years Multidisciplinary experience, providing Managerial, Engineering, Information Technology and application of new technology for onshore/offshore rigs and office operations in Drilling, Completions, Testing and Workover of vertical, directional, multilateral and hor

Exploration geophysicist with 26 years experience in both exploration and development prospect generation. Major strength in 2D, 3D depth imaging, seismic interpretation, integration, and team management. Excellent communication and presentation skills.

MBA marketing and Electrical Engineer

Drilling fluids engineer. 17 years experience in drilling and drilling fluids, Familiar with all mud systems, tendering, mud programs and waste management. Sales engineer. Computer literate.

Class 2 Mate unlimited IFO 10353

Lead Piping Engineer, Procurement Engineer, Engineering Coordinator, Pipe Stress Analysis

I have 12 years of experince in Instrumntation engineering. I have worked in oil and gas fields, Engineering consultancy, Power plant and etc.

Project Mechanical-Piping Engineer

An engineer technical assistant with progressive experience, working in Environment and Reclamation, Production and Operations, as well as Drilling departments.

Production supervisor

Manager (Production and Reservoir engineering, subsurface studies)

Motor Rewind Techinician

Education/ University/Year : Bachelor of Engineer in Mechanical Engineering (B.E.,) / University of Madras-1994 Professional Qualifications: ASNT Level II in UT, RT, MPT & PT Training Undergone: H2S and B.A training at, Qatar petroleum, HUET (Helicopter under water escape training) at Ventur

15 years autocad experience, off shore platform design, mechanical design, machinery design, civil drawing experience, Senior Designer, Group Lead.

Maintenance Planner/Schedule with 17+ years of work experience out of which 14+ years in Oil&Gas, Petrochemical, Refinery and Fertilizer Industry Maintenance and Maintenance Planning activities. Good working knowledge of Planning&Scheduling, Reporting, SAP-PM, Primavera 6.1 etc.

Available 2nd Engineer -UK CoC Unlimited ,Offshore DP Vessel

I am a successful, experienced and qualified Commissioning Start up Specialist Engineer, Commissioning Engineer, Production Supt-Supervisor, Shutdown Coordinator with over 18 years extensive experience (both onshore and offshore) within the oil, gas & petrochemical industry.

Instrument technician

Petroleum engineer,involve in drilling activity and post exploration - exploitation. willing to work any place in the world (no exception), ready to start working asap.

2D/3D seismic interpretation for structural and stratigraphic plays in the areas of both compressional and extensional tectonics, seismic attributes on 3D volume, AVO modelling and integration of acoustic impedance inversion.

Experienced Mechanical Technician,well verse vibration and industrial equipment balancing ,knows o/h of all types of pumps and compressors.

Electrical Engineer, Engineering.Construction and commissioning of offshore oil & gas facilities

Electrical Engineer with over 13 years diverse experience in managing medium scale of new & revamp projects. Proficient in design reviews, electrical equipment selection, installation & construction, monitoring, commissioning, testing and maintenance of electrical equipment.

Petroleum engineer with more than 8 year experience as System analyst, familliar with Oil/Gas production system (Scada, Historian) and SAP R/3

Senior Structural Engineer with 13 years experience - Offshore with SACS & StruCAD*3D, Onshore (refinery) with STAAD.Pro

SCADA and Automation and I&C Engineer

Mechanical Engineer with18 years experience to projects/plant maintenance (rotating/static equipment)in Oil & Gas-7 years, chemical/petrochemical-8 years and food process-utilities maint.-3 years.

(PRODUCTION MANAGER)

I am an Instrumentation Engineer, having 15.5 years of experience in the field of instrumentation from Project execution to maintenance in Refinery and Petrochemical Industries. Having work experience in SAP R/3 plant maintenance module (PM) to carry out day to day maintenance.

Seeking an entry position in Management Consulting. Can leverage diverse skills in Engineering, Management and Business. Interests in productivity/process improvement and culture change management.

Energy industry economist and manager with broad experience in both the private and public sectors covering exploration & production, refining & marketing, transportation, utilities, public policy and regulation.

Team Oriented Land Drilling, Production and Management Professional

I have 15 years experience in Oil and Gas Industries as Electrical Maintenance supervisor, 5 years an Electrical Commissioning Supervisor, 5 years in Electrical construction and hook up and 5 years at the Electrical Workshop.

11+ years experience (10 years with Landmark, 1+ years with Schlumberger) as G&G consultant worked on OpenWorks, GeoFrame, Petrel suite of applications. Currently working with Schlumberger helping clients in Petrel and GeoFrame workflows, presenting new features & updates, Petrel Testing & Training

Experienced in gas lift design, well optimization, nodal analysis, well integrity, surveillance techniques, trouble shooting, water shut-off, formation damage evaluation and treatment, interpretation of production logging , PVT & multiphase flow, water injection project, and witness rigless operati

Engineering Manager, Project Manager, Engineering Specialist

Actively seeking a position in „o PROJECT ENGINEER „o With an organization needing a professional demonstrating ability in providing consistent, cost effective methods improving quality of products while meeting best engineering practices

1. Oil and gas EPC experience for four years. 2. Design and engineering of static equipment. 3. 10 plus years' experience in mining industry. 4. Expertise in maintenance of static, rotating and utility systems. 5. Bachelor's degree in Mechanical Engineering and Master's degree in Maintenance Mgmt.

Chief Engineer STCW95 unlimited with Master's Degree. Experience on drillships, AHTS, tugs, etc. Ability to manage all engineering operations on board the drilling vessel to ensure proper operation and maintenance of propulsion machinery, drilling equipment and others whilst at sea and in port.

Project engineering and management, electrical and process engineering, project cost control and schedule, business development, power generation equipment, Russian speaking, technical translations, oil & gas, minerals and metals, FEED (front-end engineering design)

A qualified and experienced valves, piping and vessels engineer who is looking to return to mainstream engineering applications ideally as a contractor working overseas. Knowledgeable in the design and manufacturing of pressure vessels and pipework as well as valves/controls used in pressurised

A dynamic professional with more than 24 years of rich experience in Marketing, Sales, Business Development, Planning, Procurement, Process improvement, Manufacturing and Man Management.

Instrument and Control Systems Engineer, WorleyParsons, Qatar

Field operations and producing technology, Workover & Completion, Production Optimization, Water Flooding, Well Test Design and Interpretation, Artifial Lift Design and montoring, Well Planning and Development drilling, Strong software skills

I have experience as a tool pusher and driller.

Free! Drilling Superintendent: 21 years’ of progressive experience in land drilling, including extensive experience in international environments, with comprehensive management background.

8 year experience in materials, corrosion, thermal insulation and piping for the oil and gas industry, including FPSO’s, Offshore production platforms, Offshore offloading buoys, Onshore plants, LNG terminals.

Rig manager(workover) - Sudan, Field supervisor(workover and completion rigs) - Egypt, Company representative - Libya/Canada. Project supervisor - Libya

A result-oriented professional with nearly 14 years experience in Piping Design, Operation & Maintenance, Quality Assurance and Relationship Management. Handled a varie

Skillful, energetic and dedicated Project Controls Planner/Cost Analyst with extensive international Oil & Gas experience. Seven plus years interfacing with engineering, procurement, manufacturing, finance and accounting plus one year marine construction; installation and vessel operations with emp

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 [ 31 ] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out