Resume - Chemical Process Engineer, Aspen Plus, HYSYS, MATLAB, CHEMCAD, Reviewing PFD, P&...

Misco Jobs

Resume #81479

CONTACT INFORMATION:
View contact information...

OBJECTIVE
Seeking a position in Process Engineering, that will provide an opportunity to make a strong contribution to achieve an organization's goals, through continued development of professional skills.

EDUCATION LAMAR UNIVERSITY Beaumont, TX
* Master of Engineering, Chemical Engineering, GPA 3.5 Dec'08
* Coursework: Process Simulation, Thermodynamics, Real Time Optimization, Distillation, Renewable Energy
* Student Member, Rotaract & FIA

MUMBAI UNIVERSITY Mumbai, India
* Bachelor of Engineering, Chemical Engineering Jun'07
* Coursework: Mass Transfer, Heat Transfer Operations, Fluid Flow, Process Engineering Design & Drawing, Instrumentation Process Control, Chemical Engineering Economics, Biochemical Engineering.
* Student Member, Indian Institute of Chemical Engineers (IIChE)

EXPERIENCE CARDINAL CHEMICALS (P) LIMITED Kathua, India
Apr'06-Jun'06 Intern, Research & Development
* Reviewed PFDs, P&IDs, Equipment layout and specification sheets of various equipments
* Provided Process Engineering support to operations, product quality and maintenance operations.
* Provided Cost Cutting and Improving Profitability solution by change in process.

PROJECTS
May'08-Jun'08 Design of a Multi-component Distillation Column using HYSYS
* Achieved desired separation taking into consideration Distillate rate, Reflux Ratio and no. of plates.
* Taking into consideration the feed condition and hence deciding upon the condenser and reboiler pressure.

Jan '08-Apr'08 Simulation on Manufacture of Acetic Acid Lamar University
* Developed Process Flow Diagram (PFD), Included Design Specifications, Sensitivity Analysis, Real Time Optimization using Measurement and Parameter Estimation Specs, Cost Estimation and Calculator.
* Generated a base case simulation for Selected Manufacturing Process using Aspen Plus 12.1

Jun '06-May '07 Theoretical Thesis on Manufacture of Glycine, Team Leader Mumbai University
* Selected Manufacturing Process, Plant Layout, Market Analysis & Stoichiometric Calculations
* Developed detailed PFD, P&ID, Cost Estimation & Feasibility Study of the Project.
* Presented technical and commercial analysis of the chemical plant to a team of industry experts and faculty.

Jun'03- Dec '08 Hydropower, Ultraviolet (UV) Spectrophotometer, Crystal Structure, Stack Sampling – Ozone and Hydrocarbon & Cogeneration - Paper Presentation

SKILLS Simulation Packages: Aspen Plus 12.1, HYSYS, CHEMCAD, MATLAB, and Microsoft Visio
Conversant with PFD, Process and Instrumentation Diagram (P&ID), Material and Energy Balances
Software's: C language, Oracle, Visual Basic 6.0, Microsoft Office Suite, Windows XP/Vista/NT Platform.

LEADERSHIP INDIAN INSTITUE OF CHEMICAL ENGINEERS (IIChE) Mumbai, India
Treasurer 2005-2006
* Conducted various field trips and workshops.
* Organized and Chief Editor of Departments Technical Festival "SYNTHESIS 06"

HONORS
* Recipient of Lamar University Competitive Graduate Scholarship for Masters Program Aug'07- Dec'08.
* Chief Event Organizer: Intercollegiate Festival: 'Parichay-06', 'Synthesis-06', DJ Sanghvi College of Engg.

PUBLICATIONS Waste Water Treatment, Bhabha Atomic Research Center (BARC), India (March 2007)
(Trombay Symposium on Desalination and Water Reuse)
* Determined the different stages to remove undesirable impurities present in water which includes removal of suspended solids.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7951 to 8000 of 10917)

Go to Search Parameters...

Brief Description

BS Engineering, with 11 years experience in Shell Gas LPG (pak) as Health & Safety Officer/Operations Engineer, came to Canada in 2005, initially in Toronto but relocated in Calgary due to enhancement of my career in Oil & Gas field. In Toronto worked in ITN Food Corporation till June 2006.

Skill: I have worked as Production Shift Supervisor in Gas processing plant from 01-07-2000 to 31-03-2006. Successfully completed Basic Offshore Safety Induction & Emergency Training (OPITO Approved) conducted by MSTS ASIA in Malaysia, Nutec Group. Qualification: B.Sc. Engineer (Chemical), BUET.

More than 2.5 + years of experiences in the field of Planning as a Planning Engg(BE Mechanical Engg.). Analysis of Resource requirement, Performance analysis, Progress measurement, Monitoring & Reporting of EPC deliverables and activities of Pipeline projects

Mechanical Engr: Fabrication works as Mech w/Shop manager ,drawing study,planning,procurement,supervision QA/QC ,erection.

Knowledge & exp. in Electrical and Instrumentation products, in PLC, SCADA and HMI systems, drives, field instruments, Allen Bradley - Micrologix, SLC, ControlLogix, Compact Logix, Flex Logix PLC’s, Panel View Panel view plus Families, in Controlnet, Devicenet, RSView32, RSView SE Redundant

Microcontroller Application, Interfaces Application - PLC (SCADAPACK,OMRON,GE Fanuc, etc), ADAM RTU,EXPERT Module,Flow Compute (OMNI,Sybertrol,AutoExec), Compact PLC (MOXA ioLogik)

Skills: semi skilled fitter & turner, horizontal boring mill, veritcal borer, central lathe, fitter, oilmaker, piefitter, milling machine. I will be finishing my N2 early March to be qualified.

I am very much interested in Oil Gas Exploration.

I've studied chemical Engineering. I passed some curses in drilling fluids, well log, zagros formation studies, and also water treatment

I am a female geologist who is currently doing my masters in geology. I finished from the University of Port harcourt, rivers state In Nigeria. I am a team player and still able to work independently with minimum supervision.

More than three (3) years experience in Mechanical Engineering in offshore/ onshore Oil and Gas Production.Application of Incident and Injury free approach in project, HAZOP study in project.

Chartered Accountant with three years experience in Oil and Gas Industry

I would like to work with a company that is well established and stable.. I enjoy working in the Oil & Gas Industry because of the people I have meet and worked with...I want to learn more about different aspects of the Industry and look forward to moving up with a good company.

8+ years in the field of Cost Analysis (Estimation & Cost Control Function) for Refineries, Petrochemical Complexes, Oil & Gas Pipelines / Terminals and Fertilizer Projects

I work at present servicing a fuel storage depot as a Maintenance Electrician, Leading Hand. I have 6 years experience of this type of work and many specialised qualifications in this area.

Situations that may be transformed to improve define the main objective of my professional profile, problems that demand critical analysis, evaluation of variables, and proposition of novel solution strategies to overcome them. I am much motivated, well prepared, and ready to learn more everyday.

Mechanical engineer B.Tech. 6 yrs experience.(UAE) exp in dealing with contractors, sub contractors etc , contacts with major oil companies like adco,etc in UAE, excellent knowledge of UAE market .

can apply any job which you think I am fitting for

I am looking for a job in Oil Industry. I'm willing to "Hard work" and work with "Any entry level position" with your concern. I certainly would appreciate it very much if you could give me an opportunity in your company. I am confident of doing a good Job with your concern.

B.Tech/MBA,Total 5 + years experience in Mechanical & Construction Sectors. Working as CONTRACTS ENGINEER (Planning/Estimate/Proposal/Qty’ Surveyor) in M/s CAPE EAST LIMITED CO (W.L.L), DOHA, QATAR.

Chemical Process Engineer, Aspen Plus, HYSYS, MATLAB, CHEMCAD, Reviewing PFD, P&ID, Design Specifications

I m Final Year Student of Mechanical Engineer and will be pass out upto december 2006. I want utilize my knowledge and skills for an organization, which offers opportunities for personal growth and career development.

Icorr paint inspector/rope access technician

Experice engineer with project engineering and project managemnt

Mechanical Engineer

working in Ras gas - qatar as an instrument technician with 14 years experience. good knowledge in process instrumentation. good experience in yokagawa CS3000 and Foxboro I/A series Dcs. having diploma in electronics and telecommunication. pls see attached resumes for more details.

To continue employment in the field of oil & gas operations. I will bring dedication, good work ethics, and teamwork to your company.

Hard Working, faster to learn, Capable to working by individually or as a team and Capable to working in any different area

All qualifiations are posted on my resume exept that i have a passport.

Electrician who posseses a wide variety of electrical knowledge

Enthusiastic, results-oriented geologist with experience in mineral/oil & gas leasing programs

19 years of International Project Management experience, excellent communication skills at all levels. Highly organized dedicated and reliable employee, thrives under pressure. Very good computer skills, user of Microsoft Office and various accounting software SAGE, JDE, Tally & Enterprise

Service, Manufacturing, & Equipment Manager (General Mgr / Operations Mgr)

Mechanical Engineer Rotating Equipment, Pumps, compresssors, gas turbines, and diesel engines, Oil & Gas, LNG, Projects

Transmission Engineer- power system circuit and substation design & planning

Masters in Business Administration (with specialization in Finance and Human resources) Hyderabad, A.P, India.

Mechanical Engineer, with 14 years exp, expertise in construction, marines structures, fabrication of offshore, marine structures and ship repairs, quantity surveying, planning and scheduling, cost estmating

Interdisciplinary exposure to sciences and arts: Engineering-Business-IT-environmental (which is a very rare profile). Highly developed set of skills: Coordination skills, Pedagogic skills, and Critical evaluation skills

Instrumentation & Control Engineer with over 14 year experience in Basic & Detailed Engineering, Supervision, Commissioning of off shore / on shore fields. Profitional in Field Instrument, DCS, Automation, HV/LV Elect Switchgears.

Post graduate Engineer with experience in marketing, engineering, insurance survey.

Having some experiences to work in a team which done by foreigner partners that means joint cooperation with universities abroad. Pointed as team leader and should responsible my work to chief party.

I am a quick learner, self sufficient, and highly motivated individual. I have a strong interest in Health & Safety and I am looking for an opportunity to join your team at an Entry level position. Although I have no experience in this field I am confident that I will in a Health & Safety position

Welding Inspector

fresher, Accept any type of work, ready to learn, ready to accept challenges, Ambitious, Hard working.

I have over 25 years experience in management and marketing. I also have been involved in realestate and oil and gas business for 3 years.

Administration and Management.

Boilermaker/welder, nonslewing crane ticket, dogman, side loading crane ticket, cert2 in fire and rescue, cert3 in mines rescue.

Retail supermarket management operations: employee relations, customer service, safety, inventory levels/ordering, profit/loss, legal requirements, building maintenance

Experienced Floorhand/Roughneck

Valve technician, 7 years offshore

First Prev 151 152 153 154 155 156 157 158 159 [ 160 ] 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out