Resume - In response to this, please consider my PROJECT BASED resume for Instrumentation...

Misco Jobs

Resume #81509

CONTACT INFORMATION:
View contact information...

I have over 18 years in the oil and gas industry. Many of the on the job skills have been obtained through large and small capital projects with the importance of timely and orderly completion.

Over 15 years in Engineering Design including specification of:

* Field Instrumentation
* Process Measurement Technology
* Pressure / Flow / Temperature / Level / Others
* Control valves / On-Off valves / ESD valves
* Analyzers Sampling and Conditioning Systems / Analyzer Shelter / Building
* Installation details / Winterization / Drafting and CADD Standards
* Wiring and Loops
* Instrument & Controls Construction Turnover inc. Pre-Commissioning and Commissioning

PROFESSIONAL MEMBERSHIPS AND AFFILIATIONS

* Alberta Society of Engineering Technologists (Since 1991 – Current Membership)
* Woolsey Instrumentation & Design Ltd. (Contract Designer / Technologist)

EDUCATION

1987 Industrial Instrumentation Technology - S.I.A.S.T., Moose Jaw, SK.
1994 – 1992 A-B Rockwell PLC-5 Applications I, II, III & IV - S.A.I.T., Calgary, AB.
1994 Electrical Code and Applied Theory - S.A.I.T., Calgary, AB.
1996 - 1995 Distributed Control Systems I & II - S.A.I.T., Calgary, AB.
2001 E125 Process Analyzer & Sample Handling System Design – ISA, Edmonton, AB.
2004 - 2005 Foundation Fieldbus Certification INST 110/115/117 – S.A.I.T., Calgary, AB.
2007 SIL (Safety Integrity Level) Determination Leadership Workshop, ACM, Calgary, AB.

FIELDS OF EXPERTISE

* Ensure that installations meet service conditions and calibration procedures are followed, adhering to safety and quality (ISO compliant). Install, calibrate and document field instrumentation for oil, gas and mining facilities.

* Initiate Instrument Data Sheets (Primary Element Sizing - Flowel, Final Control Element Sizing - Fisher's FirstVue), Bill of Materials, Scope of Work, Instrumentation Drawing Schedule, P&ID and Instrument Index (Intergraph INtools and MS Access) preparation in accordance with project procedures. Process analyzer implementation including sample handling systems, conditioning and sheltering.

* Prepare loop wiring, PLC I/O schematics and interconnecting network topology to the client's desired Control System Architecture.

* Technical review (Including Safety Instrumentation Analysis as per ISA's S84 Standard) and instrumentation design of P&ID's with logic/control narratives for establishing safe operating procedures.

PROJECT WORK HISTORY:

November 23/2007 to February 20/2009
Suncor Sustaining Projects Group- Suncor Oil Sands and Firebag Facilities
WorleyParsons MEG - Engineering Consulting - Calgary, AB

* Lead instrument and controls engineer for Plant Sustaining projects within Suncor's Oil Sands Base Plant, Millenium Plant, and Firebag Stage 1 (Plant 91) & Stage 2 (Plant 92) facilities.

* Developed Fire Alarm Systems Criteria for Plant 21 Oil Sands South Tank Farm VRU addition utilizing existing Honeywell XLS-1000 FAP integration complete with new deluge detection.

* Developed small capital projects utilizing Delta V Foundation Fieldbus (FF) control system architectures (segment verification) for Firebag Plant 91/92 Vapor Recovery Units, Honeywell TDC 3000 control system architectures for Oil Sands Base Plant 21 Vapor Recovery Unit, Triconex Safety System Architectures within Suncor's Base Plant and Plant 92, and migration of Delta V SIS Logic Solver architectures within Plant 91 Fieldbus carrier backbones.

* Assisted in the Plant 5 Gas Oil Coker overhead and main tower expansion modifications 2007 Base Plant turnaround, field engineer responsible for turning over instrumentation and controls to Suncor client.

October 1/2006 to November 23/2007
Vankor Oilfield Development - Pumping Station and Associated Equipment Projects
VECO Canada Ltd. - Engineering Consulting - Calgary, AB

* Instrument and controls engineer, assisted in developing Engineering Design Specification (EDS) for Russian oil pipeline.

* Assisted in developing Smart Plant InTools Data Sheets and Foundation Fieldbus architectures at EDS stage of project.

November 11/2005 to October 1/2006
Inter Pipeline Fund - Bow River Pipeline & Cold Lake Pipeline Expansion Projects
VECO Canada Ltd. - Engineering Consulting - Calgary, AB

* Instrument and controls engineer, specified instrument commodities and controls equipment (AB PLC-5 and Modicon Quantum Architectures). Lead designer for installation details and PLC I/O drawings.

* Lead Design and Controls Technician for AB PLC-5 RSLogix programming and field implementation for Phase 1 Wolf Lake site (2 x 800 HP Mainline Pumps).

* Lead Designer for Wolf Lake Station's 1 x 300 HP Boosters, 285 m3/hr capacity PD custody transfer meter, La Corey Station's 3 x 1500 HP C5+ condensate mainline pumps and 1 x 350 HP Booster pump.

July 25/2005 to November 4/2005
Saudi Aramco – Shaybah Gas Oil Separation Project
SNC-Lavalin Inc. - Engineering Consulting - Calgary, AB (FEED Portion Only)

* Senior instrument engineer, developing Fieldbus and ESD architectures within P&ID (Instrumentation only) development for FEED (Front End Engineering Design) portion only of max. 750000 BPD GOSP facility. Use of InTools software for establishing FF/conventional I/O and Data Sheet development for FEED portion only.

June 9/2004 to July 1/2005
National Iranian Gas Company - Tabnak Train II Inlet Gas Sep & De-Hydration Project
Kvaerner Process Systems Canada - Engineering Consulting - Calgary, AB (Supply Contract Only)

* Senior instrument engineer, design and selection (competitive bid) of instrument commodities including sizing Flow Elements (InstraCalc), PSV's (Farris's SizeMaster) and Control Valves.

* Design of Instrument Installation Details, specification and instrument technical notes preparation prior to purchasing instrument commodities.

March 12/2004 to June 8/2004
PetroCanada Edmonton Diesel Desulphurization Project
Bantrel Co. - Engineering Consulting - Calgary, AB

* Placing instrument components in the 3-D Rebis generated model and preliminary detailed design of installation details.

December 15/2003 to March 11/2004
CNRL Horizon Oil Sands Project
Bantrel Co. - Engineering Consulting - Calgary, AB

* Engineering Design Specification (InTools Data Entry, Fire & Gas, Installation Details and P&ID Development) for Unit 41 NHT, Unit 42 DHT and Unit 43 GOHT.

July 9/2002 to December 15/2003
Suncor Millennium Vacuum and Coker Unit, Plant 57 and 52 Units
Bantrel Co. - Engineering Consulting - Calgary, AB

* QC/design/selection of instrumentation field commodities for Suncor Millennium Vacuum Unit.

January 21/2002 to July 5/2002
Shell Athabasca Oil Sands Project, Shell Scottford Refinery, Ft. Sask., AB
Athabasca Construction Joint Venture [ACJV] - Site Engineering Work Site

* Instrumentation Field Engineer responsible for 261 Tank Farm, 285 Interconnecting Pipe Rack, Rail Car Loading/Unloading and Acid Gas Flare/Vapor Combustion Unit.

* Duties included inspection of process installation of instruments and electrical terminations, answer technical queries with respect to E/I instrumentation, witness continuity and function checks on instrumentation, document deficiencies and non conformances with respect to instrumentation and perform final inspection on mechanical/electrical installations prior to turnover to the owner.

March 12/2001 to January 18/2002
Shell Athabasca Oil Sands Project
Bantrel Co. - Engineering Consulting- Calgary, AB

* QC/design/selection of instrumentation field commodities and QC of loop wiring (Foxboro I/A) for Shell AOSDP COGEN /Water Treatment/Tank Farm including installation details associated with field instrumentation.

July 11/2001 to August 30/2001
Ultramar Golden Eagle Refinery, Bechtel Martinez, CA (Various Bay Area Refinery Projects)
Bechtel - Engineering Consulting – California Office

* QC/design/selection of instrumentation field commodities for Bechtel Martinez, CA Ultramar Golden Eagle Refinery (existing plant) H2 Compressor K.O. Pot Upgrade (500 gallon slug) and install details for Crude NOX Furnace Project.

January 16/2001 to March9/2001
NOVA Chemicals Plant – Poly Flare Project
Bantrel Co. - Engineering Consulting- Calgary, AB

* Instrumentation QC/design/selection of instrumentation field commodities and field wiring for Nova Chemicals Joffre Site (existing plant), Poly Flare Upgrade.

October 30/2000 to January 5/2001
Anadarko Canada Corporation's Jean Marie Well Sites Project
Equinox Engineering - Engineering Consulting - Calgary, AB

* Design/selection of instrumentation field commodities for Anadarko Canada Corp.'s Jean Marie Well Sites (1.5 MMSCFD per 9 well average).

October 30/2000 to January 5/2001
Purcell Energy Ltd.'s Ft. Liard F-25A Well Site Project
Equinox Engineering - Engineering Consulting - Calgary, AB

* Design/selection of instrumentation field commodities for Purcell Energy Ltd.'s Ft. Liard F-25A Well Site (15 MMSCFD for 30 MMSCFD future for single gusher well). Assisted in writing logic and control narratives for Purcell Energy's F-25A well site, Anadarko's Jean Marie well site.
June 12/2000 to October 26/2000
Mobil Oil's Carson Creek Gas Production Revamp Project
Optima/Ramco - Engineering Consulting - Calgary, AB

* Design/Selection and sizing of Foundation Fieldbus (Delta V) related instruments for Mobil Carson Creek Gas Production Facilities (existing plant) inlet expansion of 500,000 m3/day.

June 14/1999 to June 2/2000
Nova E3 Projects, Joffre 2000 Project, Joffre, AB
Fluor Construction – Site Engineering

* Instrumentation Field Engineer responsible for E3 Ethylene Furnace Feed (7 Cracking Furnaces capable of producing 150,000 lbs/hr of SHHP steam), Utilities (1500 ANSI BFW Electric and Steam Pumps) and Flare areas.

* Duties included inspection of process installation of instruments, answer technical queries with respect to instrumentation, document deficiencies and non conformances with respect to instrumentation and perform final inspection on mechanical/electrical installations prior to turnover to the owner.

Feb 23/1998 to May 28/1999
Nova Offsites Project, Joffre 2000 Project
Bantrel Co. - Engineering Consulting- Calgary, AB

* Instrumentation Area Lead Designer responsible for the selection of instrumentation commodities based on price, quality and functionality. Duties included the IFD/IFC instrumentation mark-up of P&ID's for C3/C4/AC/PFO Rail Car Loading, SM / FC / TEA Unloading and Co-Product Storage for Nova/Amoco offsites.

July 29/1996 to November 28/1997
Novacor Joffre Petrochemical Plant Site, Joffre, AB
Behalf of Novacor - Joffre Plant Site Engineering

* Instrumentation Designer responsible for the design of small capital projects, existing pipeline, existing ethylene trains 1 and 2, and existing polyethylene plant.

January 2/1996 to May 7/1996
Fording Coal's Coal Mountain Upgrade Project, Sparwood, B.C.
Kilborn Engineering – Coal Mountain Site Engineering

* Instrumentation Engineering Technician assisting E/I supervisor during construction and pre-commissioning.

January 2/1996 to May 7/1996
Fording Coal's Coal Mountain Upgrade Project
Kilborn Engineering – Engineering Consulting - Calgary, AB

* Design of Instrumentation Panel Layouts (Additive panels and Marshalling Racks), Loop Wiring (Yokogawa DCS) and specification of instrumentation commodities. Able to participate in the successful production of metallurgical and thermal coal to this revamp.

January 17/1995 to December 15/1995
Du Pont's Hydrogen Peroxide Upgrade Project (Ft. Saskatchewan, AB)
Fluor Daniel - Engineering Consulting- Calgary, AB

* Assist design of Electrical/Instrumentation layouts, Loop Wiring (Interconnecting wiring from J.B. to Marshalling Rack for Fisher Provox DCS). Assist design/CADD of ESD Shutdown Systems (Hard Wired), estimation of material, wire and cable, raceway systems (tray cable) for Electrical/Instrumentation and Material Take-Off's for Du Pont's Hydrogen Peroxide Facility.

June 20/1994 to January 15/1995
Novacor Joffre Petrochemical Plant Site, Joffre, AB
Behalf of Novacor - Joffre Plant Site Engineering

* Completed E/I design packages from front end/estimation to detailed scope of work, and provided programming documentation for DCS (TDC 3000) and PLC (A-B PLC-5). Vendor reviews of pelletizing equipment and machine monitoring (Bently Nevada).

April 11/1994 to June 18/1994
PanCanadian Field SCADA Project
Kenonics - Engineering Consulting - Calgary, AB

* Assist design/drafting (AutoCAD R.12) of Electrical/Instrumentation for Speed Pick-up modifications to Deep Gas Compressor Stations, RTU Layout, I/O cabinet and RTU (Fisher ROC) panel wiring.

June 4/1993 to April 8/1994
Mobil Oil Limited Head Office
Behalf of Mobil Oil - Engineering Consulting - Calgary, AB

* Assist design/drafting of Motor Control wiring, MCC layout, 120V/Lighting layouts and P&ID's/PFD's for gas and oil gathering sites.

May 6/1991 to December 9/1992
Shell Caroline Gas Gathering/Sulfur Forming Project
SNC-Lavalin - Engineering Consulting - Calgary, AB

* Assist design and drafted (AutoCAD R.11) Location Plans, Installation Details and Loop Wiring (Modicon PLC's).

January 2/1990 to April 19/1991
Lloydminster Heavy Oil Upgrader Project
Kilborn Engineering – Engineering Consulting - Saskatoon, SK

* Instrumentation design of Instrument Location Plans, Installation Details and Loop Wiring (Foxboro I/A).

July 15/1987 to December 22/1989
Consumer's Co-operative Refinery, Regina, SK
Consumer's Co-op Employee - Plant Site Operations

* Operations Technician for the Saturated Gas Plant, Distillate Unifiner, Light Naphtha Unifiner, Penex, Delayed Coking, Gas Concentration (cooling water), Polymerization and Sulfur Recovery units. Instrument technician during instrumentation re-vamps of the old Crude and Cracking units with changeover to new Taylor DCS from old pneumatic control.

COMPANY / VENDOR SPONSORED EDUCATION:

2009 H2S Alive & First Aid Level C CPR – Flatline Response Inc., Calgary, AB.
2007 InTools Ver. 7.0 (Advanced – Smart Loop / Fieldbus / Intrinsically Safe Circuit
Design ) – Intergraph, Calgary, AB.
2005 WHIMIS – Kvaerner Process Systems, Calgary, AB.
2002 AutoCAD 2002 Update – ASCENT, Calgary, AB.
2001 Fundamentals of Process Gas Chromatography – Spartan, Edmonton, AB.
FieldVue Digital Instr and 275 Handheld Comm.– Spartan, Edmonton, AB.
1998 A-B ControlNet and RSLogix Day Course - Westburne Electric, Calgary, AB.
Modicon Concept and Quantum Day Course - Guillivan Electric, Calgary, AB.
1995 Fundamentals of MicroStation 95 and IDM - Nova Chemicals, Plant Site (Joffre)
Fundamentals of Compressor Shutdown Systems - Spartan, Calgary, AB.
Loop Tuning/Commissioning Course - A.S.E.T., Calgary, AB.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9301 to 9350 of 10923)

Go to Search Parameters...

Brief Description

CAD/CAM engineering

I have 18 years experience in the oil field on drill rigs also have 10 years experience as caterpillar mechanic I have computer, construction,electrical,plumbing skills and I am very safety minded

I have Excellent technical, communication and interpersonal skills with very good troubleshooting and problem solving skills and ability to work on multiple tasks in a fast paced environment independently and in a team. I can strive to make things work more efficiently and effectively .

12 years of experience on Intergraph EDMS/CAD System, specially PDS & Smart Plant products administration; at present working as EDMS Engineer in Sabic, Saudi Arabia since April-2001. I am going to be released by end of 2007; please find my CV attached herewith.

Instrument Engineer (Construction) , Site Engineer (Instrumentation), Field Construction Engineer (Instrumentation), 05+ Years Exp., Engineerind Degree in Electronics & Instrumentation

I have 4 years of work experience. Currently working as a Laboratory Supervisor / Chemist in Maersk, Qatar with Wallem Ship Management. Prior to that, I have worked as a Lab Technician in Inter-Tek Caleb Brett (India). I have completed my apprenticeship as a Lab Asst from BPCL, a Fortune 200 co

Electrician - Certified

Captain looking for a challanging position shore based as Marine/HSE Superintendent- Manager. I am an unlimited Master Mariner and I have recently achieved a MSc in Marine Operations and Safety Management.

Welder or Welder Supervisor

PT. JAEIL INDONESIA (09 Oktober 1999~ 22 February 2001) As Position Warehouse (Material Control): - Responsibility for controlling in receiving and issued material the day to day. - Material Order overseas or local suppliers and P/O balance. - Handling withvarious suppliers as well as and capability

Entry level electrical engineer resume

In response to this, please consider my PROJECT BASED resume for Instrumentation positions pertaining to your need.

Trade Qualified Boilermaker(Heavy Fabrication) 10years Exp, Proficent at MMAW, GMAW, FCAW welding process, Air-Arc Gouing. Tickets include: Forklift, Working at Heights, EWP.

Warehouse Management

I am a Senior Process Engineer in oil & gas systems. Along my 18 years experience in the field, I have held a number of positions going form operation to project execution and management and process engineering activities. I am fluent in English, French and Arabic.

Process engineer / production supervisor in oil/gas/petrochemical company.

I was graduated on jun 2004 in Electronic Communication Engineering (DIPLOMA), I was fully loaded with computer skills as I was a computer maintenance in Putrajaya(Malaysia), Previously I work with Mimos Semiconductors as a Production Technician. I can work as a teamwork.

I am Electronics and Communication graduate and presently working in Saudi Arabia

Radio and Communications

30 years in worldwide Operations, Sales, Engineering (Cementing Specialist) & Management with leading international service companies - principally Dowell Schlumberger & BJ Services.

Mechanic Maintenance Engineer Oilfield maintenance experience, Trilingual Arabic-French- English Total geographical mobility

looking for a job in oil an industrial field as an assistant mechanic or helper or any other position.

Experience in a number of various onshore & offshore, Oil & Gas projects. Expanded knowledge of most aspects of Piping Design from 3D & 2D design concept studies to General Arrangement and Isometric drawings. Involved in in-house designs, shop fabrication & fieldwork.

Position held : Production Technician

To work for better with a team work

HAVE BEEN EXPOSED TO : Instrumentation application & equipment in following plants 1. Coal Based Sponge Iron Rotary Kilns capacity 6 X 1,00,000 TPA. 2. Rotary Hearth Furnace : Project 3. Rail & Universal Beam Mill : Project

Instrument Engineer, experience for DCS engineered projects in design & testing of configuration DCS oil production offshore, installation, start-up Commissioning ,Shut-down/Start-up (yearly maintenance) for Oil refinery facilities& Fertilizer production, Familiar with PLC A-B and PLC Siemens.

37 year old man seek an employment or contract off-shore as a roustabout, mechanic, motorman, fitter or welder

MECHANICAL TECH: Experience in assembling and overhauling / repairing of all rotary equipment of oil/gas industry.

Have sound understanding in Geology. Graduate in Geology. Doing Post Graduation(final year) in Geology. Done field work. Computer-friendly.

Fully experienced drilling sub sea engineer

I have extensive experience in various disciplines associated with electronics. For the past two and a half years I have been employed on a semi-submersible drilling rig. In this position I worked with various PLC controls, level controls, Seimens Step5 and Step7 control trees.

I believe my 4 years studying in Universiti Teknologi PETRONAS will be of great value should I join your company. Throughout the learning process, I was exposed to the task and responsibility in the field of technical and theoretical especially in mechanical field.

Progressively Responsible of a range of Purchasing/Warehousing Management, Organization & Administration positions with worldwide procurement (national & international); Contribution and Direct Involvement in all previous jobs with regards to purchasing of spare parts and materials required for all

Project Maneger, Civil Engineer

24 years in oilfiled \ Safety Rep.\ EMT

Strategic thinker and forward, proficient at working with financial controls, experienced in QHSE, Operations audit, breath of Oilfield services and technical knowledge.

Power engineer with post graduate diploma in thermal power plant engineering. Handling emergencies and restoring the plant stability in short time. Trouble shooting the problems in a short span.

Logistics, Procurement and Materials Manager (Supply chain)

M-Tech (Aerospace) and B.Tech (Aerospace) , Specilization: Computational Fluid Dynamics

Experienced Design Engineer

A solid background in project controls, project coordination, project scheduling, and records management with over twelve years combined experience in these areas.

I am a licensed Heavy duty mechanic trained and certified in Canada. I have extensive oil field/drilling experience. I am trained in Caterpillar natural gas compression products. I have extensive supervisory experience as well.

I am working as a Mechanical/HSE Engineer in ADCOP (Abu Dhabi Crude Oil Pipe line Project) in Abu Dhabi, UAE. I have also got the training in Oil and Gas processing Plant for three months and also worked as a maintenance and sales engineer in SATAKE Corporation, JAPAN Pvt. Ltd.

Heavy Equipment Operator: Operated Heavy Equipment in a safe and effective manner in order to minimize the risk of injury, property damage or loss of life.

A project management and business development professional with extensive experience in bid management through to contractual completion. An impressive record in winning new business, and managing and completing projects on time and under budget.

Background includes the military, law enforcement, and international security management experience. Education includes a B.S. in Justice Studies, Master Safety Administrator (MSA) certification, and Emergency Medical Technician (EMT) certification.

I have a diverse environmental experience derived from both industrial and international development sectors, from the corporate level to the field level -- over a wide range of environmental aspects and capacities. Currently eager to return to engineering roots.

Mechanical Engineering Diploma holder with BGAS Painting Inspector Grade 2 Certification, working in Saudi Arabia-(Saudi Aramco contractor) as a Painting Inspector in pipeline construction field (Gas Wells, Manifolds, Trunk lines, GOSP & Gas Plants, etc).

Contracts & Global Procurement Manager, Change Agent, Systems Initiation, Strategic Sourcing, Seasoned Negotiator, Proven Organizational & Team Leadership, Collaborative Mgmt. Style, Broad knowledge of OEMs & Suppliers, Contractor Oversight, Systems & Procedures, Middle East Mega-Project Experience.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 [ 187 ] 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out