Resume - Experienced Reliability Engineer seeks overseas rotational position (i.e. 28/28)

Misco Jobs

Resume #81518

CONTACT INFORMATION:
View contact information...

Masters of Business Administration (Executive MBA), May 2009
Rice University - Houston, Texas, USA

Bachelor of Science, Mechanical Engineering, May 2003
The University of Texas - Austin, Texas, USA

Associate of Science, Aircraft Systems Maintenance Technology, December 1997
Community College of the Air Force

Experience

2007 – Pres Celanese, Senior Reliability Engineer (Rotating Equipment)

Technical Skills
* Provides engineering support at the Clear Lake Chemical Plant (Houston, Texas, USA), including the following: Steam generation (boiler feedwater and chemical injection pumps, forced draft fans), instrument air/service air/recycle gas centrifugal compressors, flash gas reciprocating compressor, firewater, effluent treatment plant, etc.
* Conducts re-rates, performs RCFAs (Root Cause Failure Analysis), determines equipment PM and lubrication requirements, provides technical recommendations, and implements solutions involving: pumps (centrifugal, canned-motor, low flow-high head, diaphragm, plunger, positive displacement, multi-stage, vertical-turbine), reciprocating and centrifugal compressors, general purpose steam turbines, sealing and lube systems, and mixers.
* Experienced in gathering and interpreting vibration monitoring data to predict and prevent equipment failures.
* Monitors the performance and mechanical condition of reciprocating compressors through PV diagrams, valve temperature, and rod load curve analysis.
* Knowledgeable in the application, as well as the hands-on operation and maintenance, of different types of rotating equipment.
* Abides by ANSI/API and company design practices to comply with mandated SHE standards.
* Identified cost-savings opportunities related to the operation of the plant instrument air Joy TA-40 HZ centrifugal compressors and Sullair TS-32 wet-screw compressor, representing savings of approx. $100K/year as a result of eliminating unnecessary blow-off, upgrading the dryer system, and improving the responsiveness of the existing controls scheme.
* Promptly recognized resonance and vibration issues on two steam boiler draft fans, preventing unnecessary shutdowns. The proposed short- and long-term recommendations will increase equipment reliability and ensure continuous steam supply to the Clear Lake site (>$250K in savings).
* Significantly improved the reliability and efficiency of a Pennsylvania Class "HOF" reciprocating compressor by upgrading the valves from a ported-plate to a concentric radius ring design.

Project Management Skills
* Manages and oversees the plant-wide, single-vendor, mechanical seal and vibration monitoring contract agreements.
* Provides input to and works with the purchasing, planning, scheduling, stores, and turnaround groups to effectively implement maintenance and reliability strategies.
* Manages projects (design, vendor selection, installation, and start-up phases) involving different types of rotating equipment.

2004 – 2007 ExxonMobil, Plant Engineer (Rotating Equipment)
* Provided day-to-day and long-term engineering support to operating units at the Baton Rouge (Louisiana, USA) Chemical Plant.
* Directly assisted in the overhaul and inspection of a major Ethylene compressor. The tasks performed included: Hot-on/cold-off coupling work, removing and replacing the dual mechanical seals, and performing a visual and dimensional check of the sleeve bearings.
* Successfully led the plant-wide "bad actor resolution" initiative by identifying and eliminating the most unreliable pumps across the entire site, resulting in high-impact monetary savings (>$2M) to the process and maintenance organizations over the next ten years.
* Provided turnaround support in the reconstruction of reciprocating and centrifugal machines, participated in HAZOPs, conducted RCFAs, and led incident investigations.
* Directly participated in the equipment specification and inspection via ITP plans of equipment for the Isopropyl Alcohol Expansion project at the Baton Rouge Chemical Plant.
* Experienced with severe service pump applications, such as: sulfuric acid, high temperature, high vapor pressure, and high D*N numbers.

2003 – 2004 Lockheed Martin, Electrical Subsystems Designer
* Designed and laid out electrical subsystems in the wing and wing-to-body fairing areas of the F-35 Joint Strike Fighter at the Fort Worth (Texas, USA) Plant.
* Proficient in the use of CATIA V4 software.
* Abided by rigorous design guidelines to accomplish safe and lightweight development of mechanical components.

1999 – 2003 Texas Air National Guard, Aircraft Electro-Environmental Systems Specialist
* Maintained F-16 electrical and mechanical systems, such as: pressurization, lighting, oxygen, fire suppression, brakes, and anti-skid systems.

1995 – 1999 United States Air Force, Aircraft Electro-Environmental Systems Specialist
* While serving on active duty controlled and directed in-shop maintenance of F-117 aircraft antennas and control panels, cryogenic containers, and fire suppression systems.
* Provided maintenance support while deployed to Kuwait in 1998 (Operation Southern Watch).
* Trained and supervised personnel.
* Veteran.

Training/Skills
* Centrifugal Compressor Operation & Maintenance (Dresser-Rand - CSS-105).
* Steam Turbine Operation & Maintenance (Dresser-Rand - STC-225).
* Pump and Mechanical Seal Specialist (Flowserve).
* Sealing Systems (John Crane).
* Introduction to Machinery Vibrations (Vibration Institute).
* Reciprocating Compressor School (Dresser-Rand - RCS-105).
* Machinery Vibration and Rotordynamics Short Course (BPI).
* Zirconium Welding Seminar (ATI Wah Chang).
* Proficient with the use of PI, SAP, CATIA V4, SolidWorks, COSMOS, fluid systems modeling software, Word, Excel, Project, Visio, and PowerPoint.
* Held Department of Defense (DoD) SECRET clearance for a period of eight years.
* Skilled in the use of Six Sigma for improving product quality and customer satisfaction.
* Fluent in Spanish.

Employability U.S. citizen.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9151 to 9200 of 10917)

Go to Search Parameters...

Brief Description

Familiar with all steps of equipment, structure fabrication and piping installation as pertinent specification, document control, subcontractor management knowledge, claim representation and site safety conception.

Diverse technical back ground including hydraulic power plant technician ,fresh water analyst, pump mechanic, maintenance coordinator, maintenance mechanic, and valve installation repair

Draughtsman

Available Immediately To Discuss A Challenging And Responsible Position Where My Background And Experience Can Be Fully Utilized To Our Mutual Benefit.

I am an Electronic Engineer and I have a short experience in Oil & Gas field. My dream is to get an entry level position in this field especially in instrumentation field.

I am a hardworking and honest person looking to have a new career in the oil industry. I am dedicated to my work and would be a good employee.

Pip in indistrial safety, working in ministry of elec & water ,kuwait.

Computer Technician

Principal Environmental & Safety Consultant, oil, gas, mining & major projects; EIA, EMS, Environmental risk etc, climate change, HAZOP, HAZID, Safety managment etc experience. Relocating to Vancouver. Has right to live and work in Canada

Cad Drafter/Designer

Automobile related

Mechanical Engineering Graduate EIT - experience at underground mine sites, maintenance planning, drafting in autodesk inventor, physical asset management, underground mine hoist ropes and lubrication, scheduling

Eight years of experience in the field of Mechanical Engineering Works that primarily concerns on overall mechanical system and details design as well as fabrication.

Instrumentation and Control Engineer

Electrical Engineering, Energy Systems, Power electronics

I am Diploma in Mechanical Engineering. I have adequate knowledge in Auto-Cad in mechanical engineering field. I also have confident experience in X-Steel & SDS2 in steel structure back ground.

Graduate Electrical with Power Electronics

Sub.: Power plant /Utility Electrical Maintenance Engineer

B.Com (Commerce, MS-Word, MS-Excel, Tally, Emails, Internet & Other Software

Shipping Supervisor

Pipefitter with supervisory and training facilitator experience

Experienced Reliability Engineer seeks overseas rotational position (i.e. 28/28)

At present doing a 2 year contract at a bulk fuel installation, in Basrah, Iraq, as an Operator. I have 25 years experience as a fire fighter and paramedic and the last 2 years have been doing aviation and road fuels at an Airport and bulk fuel installation

I have worked with all the various vendor representative from the manufactures as well as many after-market repair vendors from the UK, Germany, France, Italy, Canada, and USA.

Environmental Engineer and Senior Project Manager

I am graduated with M.Sc.Applied Geology with Specialization in Geophysics. I have completed my Internship with Oil and Gas development company (O.G.D.C) in geophysical data interpretation of oil well. I have also worked on different softwares like Golden software (surfer 8), Didger, QuickSyn.

A professional LNG Technician/Engineer is looking for a position where his skills and education will add value to operations.

Prevent / correct unsafe acts & condition.

Auto CAD 14/2000i/2004/2005/2006/2007,AutoCAD Map, CAD Overlay, Map Info7.0,Arc View3.2

Education:B.Tech (Civil), Pondicherry Engineering College, Pondicherry Univercity, in 1997. Skills: AutoCAD, MS Office, MS Project and Primavera. Trainings Undergone: Green & Red Code Accrediation program by CED, JAFZA

International field work resume(non-abbreviated)

Looking for work as an Industrial Engineer - biligual.

LOOKING FOR JOB IN ANY POSITION

B.E.(Electronics & Telecommunication) with good academic records. working as service engineer in R.K. engineering services private limited.

Over twenty years of experience

Mining Engineer with 20+ years experience, Supervisor of Drilling Crews, great work ethic, will meet deadlines and bottom line, effective team builder

QA/QC Engineer & Inspector for (Welding, NDT, Piping, Structure, Mechanical, Painting, Coating, Storage Tank, Electrical & Instrument) , Construction Supervisor and Field Engineer

Safety, Health, Quality, Environmental, Waste management, training, investigations, incidents, orientations,contractors, oil and gas, chemicals, construction, hazop, hazards, emergency response, job observations, near misses, safety alerts, hazard communications

Procurement & Supply Chain Management

Area lead designer, PDS ,Microstation, AutoCad, Smartplant review, Peligan Forge Support moduler.

INSPECTION and SUPERVISION (Welding / Piping / NDT / QA/QC / Mechanical / Materials / Coating and Painting).CSWIP 3.2,ASNT Level 3,NACE Coating Inspector,ISO Auditor

Quality Management, ISO 9001, ISO 14001, OHSAS 18001, Lead Auditor of IRCA, TUV-CERT

Had been involved in diversified organization for more than 7 years as Document Control, Management Information and Records Custodian. Knowledgeable in administering exchange of documents used of Document Control System, proper retrieval of documents in line with the ISO Standard and Procedures.

Seeking Chemist, Laboratory, or Quality Control Position

Worked in an oil and gas industry and undergone an intensive training .

MS-GIS, International MBA, Fluent english and spanish, basic Arabic

Perform repairs on Ford automobiles electical systems, drivetrain, driveability. Extensive training through Ford Motor Company.

Qualified HSE ADVISOR offshore, Drilling,production, pipelaying, french,48, immediately available

Project Management, Primavera P3E Scheduler

Instrument and Electrical Superintendent with over 30 years of experience in the construction field

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 [ 184 ] 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out