Resume - A diversified and experienced individual seeking opportunity in mechanical engin...

Misco Jobs

Resume #81558

CONTACT INFORMATION:
View contact information...

QUALIFICATIONS

Education:
* 2006-07 University of Phoenix Houston, Texas / Computer Information Systems - Management / Organizational Behavior / Computers & Information Processing / Effective Written Communication 3.92 GPA
* 1986-1991 Community College of the Air Force Hahn AB, Germany-Great Falls, MT / Aerospace Power Plant Technology / Powerplant Technician Certification
* 1986 Odessa High School Odessa, Texas / Accounting I & II / Economics / Honors English

Training:
* 2001 Cummins Supply / Allen Bradley SLC 500 - Odessa, Texas
* 2000 Solar Turbines / Allen Bradley PLC 5/20:5/40 - San Diego, California
* 1990 General Electric / CFM 56-2 Jet Engine Course - Cincinnati, Ohio
* 1989-1991 U.S.A.F. / KC-135(R) Jet Eng. Tech - GE Great Falls, Montana
* 1986-1989 U.S.A.F. / F-16 Jet Eng. Tech.-Pratt & Whitney - Hahn AB, Germany 1/2002

WORK HISTORY

2004 – 2009
WOOD GROUP / ODL Houston, Texas
Technical Consultant
* Mechanical Discipline experienced in Computerized Maintenance Management Systems; CMMS data collection and development; able to read and apply system schematics and (P&ID's); furnish data for equipment status reporting and historical records. Knowledgeable in maintenance and integrity management programmes designed to enhance operational performance during development and operational phases. Work closely with clients to provide safe, cost-effective maintenance strategies aimed at minimizing revenue-reducing operational downtime. Prepare scheduled maintenance tasks based on vendor information and vendor supplied drawings. Develop, review and modify written procedures to suit equipment application. Technical writing skills for Standard Operating Procedures and maintenance guidelines for offshore production operations. Identify areas of concern which reduce production downtime resulting from the failure or degradation of critical equipment and minimize safety/environmental issues. Enter detailed descriptions of the operations and maintenance systems. Determine maintenance requirements and make recommendations to ensure unit reliability. Enter equipment attributes into the database to form a precise description of the operations and maintenance system's operating principal. Develop recommended spare parts lists and identify inventory requirements to meet client's maintenance strategy. Ensure that the highest levels of safety, quality and cost-effective performance are achieved at all times.

WOOD GROUP L.I.T Houston, Texas
Quality Assurance
* Develop written procedures used for component repair process. Outline specifications and tolerances used for turbine overhaul and repair. Track and prioritize work as required to minimize production loss. Perform disposition of Solar industrial turbines, centrifugal compressors, and accessories. Recommend parts needed to complete overhaul. Communicate with vendors to ensure quality and integrity. Initiated process flow to eliminate backlog and speed up production.

WOOD GROUP E & PF Houston, Texas
Technical Specialist
* Mechanical Discipline experienced in Computerized Maintenance Management Systems; entered detailed description of the operations and maintenance systems. Used vendor supplied drawings and manuals to prepare scheduled maintenance tasks based on vendor information. Entered equipment attributes into the database to form a precise description of the operations and maintenance system's operating principal. Develop, review and modify written procedures to suit equipment application. Track and prioritize work, review proper systems applications and procedures. Facilitate Gulf of Mexico maintenance program for British Petroleum Gathered equipment data from maintenance schedulers and management to allow for detailed review of specific equipment to be overhauled (Venice, Cameron and Grand Isle, LA). Recommended need for Predictive Maintenance Program that would dictate maintenance requirements. Challenged the necessity for annual overhauls based on operating conditions resulting in significant savings for the company and their shareholders.

2003 - 2004
BAKER ENERGY Houston, Texas
Technical Specialist
* Mechanical Discipline - Using vendor supplied drawings and manuals, entered detailed information of equipment into database. Worked diligently in handling information needed to prepare scheduled maintenance tasks, meet delivery deadlines and satisfy customer requirements. Develop recommended spare parts lists and identify inventory requirements to meet client's maintenance strategy. Track and prioritize work, review proper systems applications and procedures.

1999 - 2003
HANOVER POWER & TURBINE SERVICES Houston, Texas
Turbine Service Technician
* Service GE and Solar industrial gas turbines. Responsible for obtaining turbine operating data, evaluate and compare data in relation to machine operating history. Perform major inspections for quality assurance to include: borescope, predictive maintenance, vibration analysis. Overhaul and repair of Solar generator/compressor units and GE Frame-3, 5, 6 and Frame 7 generator/compressor units. Experience and use of condition based maintenance analysis tools, equipment integrity analysis tools, predictive analysis tools, performance and efficiency trend analysis tools. Knowledge and ability to analyze equipment failure, pull appropriate data, complete subsequent analysis, and develop corrective action plans. Skilled in spreadsheets, web applications and word processing.
Perform predictive maintenance inspections for clients throughout the U.S. and internationally. Operate computerized analytical program tools (CSI 2120A RBM ware) to provide for specific evaluation of areas of potential concern affecting safe and proper continued operation of machinery. Recommended maintenance planning, major inspection execution, performance monitoring and analysis of gas turbine power plants (Puerta Plata, Dominican Republic). Provide feedback, generate reports, and make recommendations to ensure unit reliability. Perform fabrication, assembly, electrical wiring and packaging of Solar Centaur and Saturn generators. Tasked with commissioning of power plant in Barinas, Venezuela. Assisted with construction of power generation plant which included one Solar Saturn (750KW) and three Solar Centaur (4 MW each) generator sets. Responsible for coordinating part orders, delivery and installation. Install and calibrate Rosemount pressure transmitters, vibration and liquid level switches. Verify communication between package AC panels and PLC controllers. Various offshore duties in the Gulf of Mexico (Venice, Fourchon, New Iberia & Cameron, LA; Port Aransas, TX) and Pacific (Santa Barbara, CA) included troubleshooting, repair, maintenance, installation and alignment of reciprocating compressors and gas turbines. Coordinate and assist in de-commissioning gas turbines and generator sets purchased for refurbishment and resale.

HANOVER ENERGY SERVICES Midland, Texas
Crew Leader
* Tasked with overhaul and repair of skid-mounted engines and compressors; generate part orders; train shop personnel; provide job cost estimates. Inspect compressor cylinders/valves, pistons, and bearing surface areas using special measuring tools. Ability to analyze equipment failure, pull appropriate data, perform failure analysis, and develop corrective action plans. Ensure the unit's prescribed operating tolerances were met. Perform pipefitting, stainless steel tubing, and electrical conduit installation. Start-up and commissioning of various engine driven compressor packages in remote locations throughout Texas; Southeast NM; Bakersfield, CA; (Caterpillar 3516-399, 398, 3306; Waukesha 7042 & 3521; White-Superior 2406 & 8G-825; Ajax DPC-230/280). Install and set-up wireless communications for remote monitoring of company owned field units throughout SE New Mexico and West Texas. Install electrical conduit, steel tubing, pull and terminate wiring; verify communications.

1998 - 1999
B & M OIL TOOL Midland, Texas
Maintenance Manager
* Responsible for part orders/fabrication, schedule work assignments and priorities, recording historical data on all company owned equipment, and inspecting work areas for safety related issues. Duties include installation, maintenance and operation of lathes, drill presses, milling machines, hydraulic actuated pipe racks, forklifts, and inertia welding equipment. Troubleshoot, remove, and install electric motors on industrial saws used for cutting materials. Rework gearboxes and aprons/cross slides on manual lathes. Overhaul CNC lathes: remove/install lead screws, remove/install turrets, remove/install pneumatic spindles. Installation of air supply system throughout facility. Using condensation filtration unit, able to prevent failure of pneumatic controlled air chucks incorporated on CNC lathes. Maintain four shop facility and direct personnel in fabrication of down-hole drilling equipment. Evaluate and recommend personnel for company bonus program. Train employees in the use, service and maintenance of machinery and associated equipment.

1994-1998
UNC INDUSTRIAL POWER Odessa, TX
Turbine Overhaul Technician
* Extensive knowledge in disassembly, inspection, repair and overhaul of Solar Centaur and Saturn gas turbine compressors. Provide disposition of unit condition and recommend/order parts to be replaced/repaired for accurate job cost estimates. Perform inspection on gas producer (compressor), turbine rotors, nozzles, diffusers, accessory gearboxes, and sub-assemblies using special measuring tools to ensure quality control in accordance with ISO 9000 standards. Calculate and measure the flow of turbine nozzles to achieve maximum horsepower and performance. Involved in all phases of installation and packaging of turbine compressor/generator sets. Assembly, paint, packaging, shipping and receiving of compressor/generator packages. Measure, cut and install piping, electrical conduit, wiring, tubing and instrumentation used to monitor turbine operating conditions.

1994
CUTTER BEECHCRAFT AVIATION SERVICES /CONTINENTAL AIRLINES Midland, Texas
Aircraft Mechanic-Ground Handler
* Duties included refueling, inspection, repair, and installation of components used on King Air, Beechcraft, Piper, and Cessna aircraft. Maintained fuel service trucks, monitored and recorded fuel inventory levels. Performed ground handling, launch/recovery, and towing of aircraft. Team member of single point refueling; supervised refueling/defueling and fuel panel operator. Tow team supervisor; operate tow vehicle; aircraft parking; quick turn inspection; service main/nose gear struts and tires.

1991-1994
DESIGN ENGINEERING Odessa, Texas
Machinist Apprentice
* Compressor Mechanic Set-up and operation of portable field machining equipment. Repair, maintain, and operate manual lathes, drill press, milling machines, and welding equipment. Traveled to production sites and performed wire line inspections, metal locking, and honing on various compressor frames. Disassemble, machine, and inspect engines, compressor frames, cylinders, and crankshaft bearing surfaces using special cutting/measuring tools to ensure OEM prescribed tolerances were met. Polish and inspect crankshafts for deterioration/wear.

1986-1991
U.S. AIR FORCE 50th Tactical Fighter Wing Hahn AB, Germany / 301st Air Refueling Wing Malmstrom AFB Great Falls, MT
Jet Engine Technician Sgt (E-4)
* Responsibilities included troubleshooting aircraft engine systems, borescope, generating engine maintenance reports, part orders, training personnel, and flight-line engine operation. Plan and schedule work assignments. Evaluate and recommended personnel for training; prepared job proficiency guides; counseled trainees on training progress. Experienced in engine run, performance monitoring and diagnostics center. Perform installation of test equipment for engine diagnostic testing at the test cell/hush house. Using the Automated Ground Engine Test System (AGETS), calibrate and trim the Electronic Engine Controller (EEC) and Unified Fuel Controller (UFC); two vital components on the General Dynamics F-16 Falcon.
Knowledgeable in performing systems operations: electrical, oil, fuel, engine start, integrated driving generator, and engine control systems. Crew Chief qualified and engine run certified on the KC-135(R) tanker. Perform maintenance and engine operation on the GE CFM-56 turbo-fan aircraft engine. Able to perform removal/installation and inspection/repair involving fans and boosters: No.1 & 2 bearing supports, HPT nozzle/rotor, LPT nozzle/turbine/shaft, transfer gearbox and accessory gearbox. Service hydraulic systems, liquid and gaseous oxygen systems, perform aircraft ground handling (towing), fuel servicing/transfer, preflight and post-flight inspections; Auxiliary Power Unit (APU) troubleshooting, removal and installation

Achievements & Awards:
* Initiated Predictive Maintenance/Vibration Program for Dynegy/Midstream Refinery-Venice, LA. Ensured unit reliability, increased production, cut repair costs and helped customer prevent significant losses due to unit outages – 2003
* Tasked with commissioning project in Venezuela which consisted of the refurbishment /construction of a Solar Centaur Generator Package for Power Generation Plant in South America. Trained personnel on proper installation of components and saved the company additional money by reducing sub-contract work – 2002
* Responsible for eliminating outdated air supply system due to severe work hazard: ordered necessary materials; installed air supply lines throughout a four-shop facility. This directly affected productivity, increased reliability, and assured worker's safety – 1998
* Wrote a procedures manual outlining disassembly and inspection of Solar Saturn turbine compressors. Enabling technicians to disassemble and correctly identify status of each component allowed for the proper part orders/repair or scrapping of parts making the overhaul process more efficient – 1995
* Master Technician Award-USAF – 1990
* Engine Run Certification KC 135(R) Aircraft-USAF – 1990
* Honor Graduate; Professional Military Education-USAF – 1989
* Promoted to Senior Airman Below the Zone. Earned the rank of Sergeant 6 months in advance for displaying technical knowledge, professional skill and initiative in the performance of my duties - 1989
* The Air Force Achievement Medal -USAF; directly contributed to the 98 percent engine acceptance rate by 50th Component Repair Squadron Test Cell/Hush House. - 1989
* Helped 50th Tactical Fighter Wing earn USAF Daedalian Award – 1987
* Dept. of Defense Phoenix Award, 50th Component Repair Squadron - 1986 and 1987
* United States Air Forces in Europe Maintenance Effectiveness Award – 1988
* Earned the 50th Component Repair Squadron Airman of the Month Award - 1987

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1001 to 1050 of 10923)

Go to Search Parameters...

Brief Description

Experienced Materials coordinator

HSE manager . qualfication . diploma of HSE engineer , osha qualified

A diversified and experienced individual seeking opportunity in mechanical engineering / management support or related field.

Planning of all the activities of Major and Minor inspection of conventional steam turbine of various capacities from shut down to start up and over speed testing.

development of process flow diagram (PFD) and P&IDs, equipment sizing & preparation of datasheet, heat and material balance, simulation on HYSYS, process improvement, Hazop Reviews, line hydraulics, debottleknecking to improve plant performance, commissioning and pre-commissioning activities.

Fabrication , construction , in-service inspection , repair, alteration and rating activities for pressure vessels , pressure relieving devices , steel storage tanks built to API 510, ASME section VIII div 1,

B.E.-Chemical with 9 years of Commissioning and Operation Experience in Ammonia Plants; 6 years of Project Management experience & 4 years of Process Engineering experience in Fertiliser Project

PLAN SUPERINTENDENT,PLANT MANAGER.SHUTDOWN MANAGER,MAINTENANCESUPRINTENDENT.TECHNICAL CONSULTANT.COMMISSIONG ENGINEER

Highly experienced in project engineering management

I have experiences in Oil and Gas International Company in Exploration, Development and Cross Function Team Departments for 26 years in Indonesia with the latest position is Geoscience Analyst. I am expert on DAta base Administrator for Well dar, seismic and petrolog data

Document Controller,Scheduler (Primavera P3), Programmer (FoxPro), Administrative Assistant

Project Management Professional - 16Years of Experience (including overseas) in..,

Diploma In Civil Structural Engineering, Designer, Detail Engineering, FEED,Oil and Gas, EPC, PDMS, PDMS DRAFT, ACAD, Microstation, Review Reality, Terramodel, Windows (MS word, MS Excel & MS PowerPoint) on Windows NT & 2000 Novell environment

Core Negotiator & Timely & Quality Conscious Buyer

Casing Vibration monitoring and spectrum analysis of Rotating equipment by using data collector & analyzer (SKF Microlog CMVA60) and data manager (SKF PRISM4 1.35 / SKF Machine Analyst 2.2)

Process Engineer with 19 years experience on which 12 years of Project Engineering, and Commissioning in international team environment.

Lead the Project in Oil and Gas in different companies namely CB &I, Ajman, Maersk Oil Qatar, Kvaerner Powergas Mumbai, Tecnimont ICB Mumbai etc.

Over Eleven (11) years of extensive experiences in the field of Planning/Scheduling Engineer of various projects. Similar to Oil & Gas Refinery, Chemical Plant, Oil & Gas Exploration & Production Onshore/Offshore, Power Plant, Transmission Line and Desalination Plant in Russia, Vietnam, Kuwait, Ch

A reliable, enthusiastic administrative assistant with diverse experience, a strong work ethic and excellent attitude. Personable, diplomatic, flexible and adaptable team-player. Professional deportment and discrete. Self-motivated and willing to learn.

ASNT NDT LEVEL-III +CSWP+ISO LA+RSO

Extensive Operation experience in different petrochemical industries.

OSHA 30 - WCS Well Control School

Sr. Electrical Designer with AutoCAD background & some Microstation experience.

Worked in the oilfield for 28 years a very dedicated person and reliable,truthful, teamplayer, think safety.

A result oriented professional with 11 years experience of quality control, Quality inspection Management,NDT-inspection and CAWI-certificate holder

10 years experience in Design, Operation & Commissioning in Well head facilities, Gas gathering and processing, Gas Compression, Gas Dehydration, Gas Sweetening NGL Production, Crude/Condensate Stabilization, Produced Water Systems Water Injection unit ,Hydrotreaters, Hydrogen Generation Units .

In my 31 years of I&E Design experience I have attained many skills. These include • MicroStation V8 • AutoCAD R2007 • SmartPlant Instr V7 • Intools • Intools • Safety Instrumented Sytems

I mainly realized an extensive development of my professional race within the Halliburton corporations. I began as Field engineer in the Logging and Perforating Services Line continued until arriving at management positions like Service Coordinator and Service Quality Coord, BD Manager Logging

Piping design autocad microstation ceasarII

Qualified Welder / Fitter / Mechanic

Working as Sr.Instrument technician with OXY Qatar. Involved with Maintanenace and commissioning on offshore.

Senior Completions engineer with excellent welltesting skills.

Geoscience consultant for integrated studies, seismic interpretation, reservoir characterization, reservoir geophysics, and interpretive seismic processing.

QHSE + E manager worldwide

Experienced E&P Geologist cum Manager with M.Sc. (Geology) and MBA degrees with over 25 years integrated experience from discovery of new prospect to delineation and evelopment.

Drilling Fluid Engineer having 17 years experience

Thermal Designer Boiler Heaters

Over 10 years experience leading the logistics functions with responsibilities in import and export operations as well as distribution, planning, inventory, forecasting and reverse logistics.

I have undertaken the Several Category of Scope & Quantity Verification for Cost Control, Invoice Claim and Change Order Claim to Client. And also, I have undertaken the several Type of Contract ; Fixed Price, Cost Reimbursable and Unit Price.

Highly skilled Multi-discipline Estimator. Proven team performer. Experience in working on a multi-cultural environment

EDUCATION: B.S., Geology, The Pennsylvania State University, 1985. Experience in exploration, and geophysical well log.

Instrument Engineer with over fifteen years of experience in the Engineering, Construction & Commissioning of Instrumentation and Control Systems for Oil, Gas and Petrochemicals industries. Extensive knowledge and experience in the installation, commissioning, maintenance and trouble shooting of Ins

Worked on various oil/gas and coal bed methane exploration and development projects (400+ wells) in Alberta, Saskatchewan and Northeastern British Columbia. (Western Canadian Sedimentray Basin) over a 15 year period. Also worked on a two well project (onshore) in country of Qatar.

More than 16 years experience on electrical field

EXPERIENCES IN DESIGN, CONSTRUCTION,REVIEW,QC,PRECOMM AND COMM, COMPLETION ENGINEER

Multi tasking experienced Geologist(MSC.)/ P.Engineer(PhD), looking for positions in geology/ reservoir engineering (even on entry level). I am fluent in many languages, willing to relocate Worldwide, available immediately. Presently living in Canada.

Chemical process engineer with 18 yr's of Up- and downstream Oil & Gas experience

Country manager

20+ Years experience in all aspects of Offshore Oil & Gas Exploration, Construction, Developement & Production. And Onshore Processing. Most recently in Safety & Environment sector.

Snr Completions Supervisor & Well Intervention Supervisor.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 [ 21 ] 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out