Resume - Senior Offshore Structural engineer with 13 year of post graduate experience in ...

Misco Jobs

Resume #81595

CONTACT INFORMATION:
View contact information...

NATIONALITY Indian
PROFESSION Senior Structural Engineer (Offshore/Upstream)

QUALIFICATIONS Post Graduation (M.Tech) in Geotechnical Engg. from Indian Institute of Technology(I.I.T), Bombay, Mumbai (INDIA) in 1996.

Graduation (B.E) in Civil Engg. from Jadavpur University, Kolkata (INDIA) in 1993.

PASSPORT NO. F 3045801 (Valid Up to Year 2015)
DATE OF BIRTH 23rd December, 1971
MARITAL STATUS Married and having 8 year old Daughter

E-mail ID: ashis.manna@gmail.com ashis.manna@rediffmail.com
KEY EXPERIENCE Over 13 years of Postgraduate Experience in Oil & Gas industry (Offshore/upstream) and Civil engg. in the capacity of Senior Structural Engineer / Geotechnical Expert for the projects located in Persian Gulf, South China Sea, Arabian Gulf, Black Sea and Gulf of Mexico. Experience in both Green field and Brown field works.

SUMMARY OF EXPERIENCE

„« DETAILED DESIGN / ANALYSIS OF FIXED OFFSHORE STRUCTURES
* Extensive hands-on experience in all stages of Design Engineering (Conceptual / Preliminary (FEED) / Detailed Engineering) of Offshore Structures
* Computer Aided Analysis & Design of Jackets, Topsides, Helidecks, Pile Foundations, Mud mats, Sea-fastenings, Piping/Equipment Supports, Lifting Pad Eyes, Trunnions, Tubular Joint Design, Cathodic Protection System and preparation of fabrication drawings
* In-place, Fatigue (Deterministic & Spectral), Earthquake, Load-out, Transportation, Lift (Offshore/Onshore), Un-piled Stability Analyses of Offshore Structures
* Structural Assessment and Modifications of Existing Offshore Platforms
* Thorough & Fluent Working Knowledge with Structural Software SACS 5.2 (SP-2), STRUCAD*3D, USFOS, STAAD -PRO
* Detailed Pile Drivability Analysis with GRL-WEAP 2005
* Conversant with Structural Design Codes/Standards API (WSD & LRFD), AISC, BS, DNV Codes & Standards
* Preparation of Design Basis, Specifications, MTO/WCR, Installation Procedures, Structural Drawings, Technical Project Reports, Detailed Design & Analysis Reports
* Offshore Site Surveys for Data Collection and Verification

„« PROJECT MANAGEMENT
* Preparation of Project Schedules, Man Hour & Cost Estimates, Weekly Progress Reports
* Maintenance of Document Control Register, Scheduling and allotment of Man Power
* Technical Assistance to Construction Activities
* Basic Technical Evaluation of Bid Documents; Meeting with Clients/Contractors to ensure compliance with technical specifications & requirements
* Leading a Team of Engineers and Designers as Senior Structural Engineer

„« SOFTWARE SKILL SET
* Structural Analysis & Design: SACS 5.2 (SP-2), USFOS, STRUCAD*3D, STAAD PRO, GRL-WEAP 2005 Software
* Packages: MS Office, MathCAD, MATLAB, AutoCAD 2000
* Operating Systems: Windows XP/NT/2000, DOS, UNIX
* In-depth knowledge of Microsoft Excel: Writing of Spreadsheets for different Structural Engineering Applications using Excel & VBA; Project Automation
* Report writing / Presentation preparation using Microsoft Word / PowerPoint
„« CHRONOLOGY OF EMPLOYMENT
Time Period Organization Office Location Position Held
From To
Jun'08 Present Ranhill WorleyParsons Sdn. Bhd Kuala Lumpur, West Malaysia Senior Structural Engineer
Aug'07 Jun'08 Ranhill WorleyParsons Sdn. Bhd Miri, East Malaysia Senior Structural Engineer
Oct'05 Jul'07 WS Atkins & Partners Overseas Sharjah, UAE Senior Structural Engineer
Mar'00 Oct'05 Zentech India Offshore Mumbai, India Structural Engineer
Mar'96 Feb'00 Stup Consultants Ltd. Mumbai, India Senior Design Engineer/Geotechnical Engineer

DETAILED WORK EXPERIENCE

Jun'08 to Present Ranhill WorleyParsons Sd. Bhd, Kuala Lumpur, West Malaysia (www.worleyparsons.com)
Position: Senior Structural Engineer

National Iranian Oil Company: South Pars Gas Field Development Projects: Phases 17 & 18 Offshore Platforms ¡V Green Field Engineering (Ongoing)
Detailed Engineering of 4 Nos Wellhead Platforms located about 100 kms South West of Assaluyeh (Offshore), Persian Gulf, Iran. The processed gas and condensate in SPD 25 & SPD26 (Satellites) will be directed to SPD24 and SPD23 respectively via infield pipelines 18" & 20" which collectively will be transferred to onshore facilities. The platforms are located at a water depth of 60m and 70m respectively. The piles are driven into clayey soil strata having calcarenite deposits.
Detailed engineering for four Flare Support Platforms (tripod) are also carried out.
Responsibilities Include-
- Detailed In-place Analysis of the well head platforms and Foundation Design
- Static & Dynamic Spectral Fatigue analysis of Jacket Platform
- Seismic Analysis of the Substructure
- Boat Impact Analysis on Jacket structure
- Jacket Flotation & Upending Analysis
- Load Out & Transportation Analysis
- Jacket Launch Analysis
- Jacket On-bottom Analysis & Mud mat design
- Pile Driveability Analysis & Pile Stick up Analysis
- Boat Landing & Barge Bumper Analysis And Design
- Cathodic Protection Design
- Technical Specification Review
- Technical Bid Evaluation of Vendors
- Reviewing of Technical Specifications

Aug'07 to Jun'08 Ranhill WorleyParsons Sd. Bhd, Miri, Sarawak, Malaysia (www.worleyparsons.com)

Position: Senior Structural Engineer (Oil & Gas Division)
Sarawak Shell Berhad: Structural Integrity Reassessment of Jacket/Substructure & Topside for South Furious LLP Compressor platform (Brownfield engineering)
Two 4-legged jacket platforms are located in South Furious field in South China Sea. Combined Lube & Gas Cooler, LLP Compressor, Suction & Discharge Scrubber need to be installed on the cellar deck level on SFK-A platform and two pumps at the main deck level for SFP-A platform. There is a connecting bridge between SFK-A and the drilling platform SFDP-A, which also has a new set of pipe lines running on it.
Responsibilities Include-
- Detailed In-place Re-Analysis of the existing platform
- Structural Integrity Assessment of the Topside
- Structural Integrity Assessment of the Substructure
- Detailed design of Pad-eye, temporary structural supports
- Preparation of Construction scope of work
- Preparation of construction/Installation Drawings
- Structural Integrity Assessment of the connecting Bridge

Petronas Carigali Sdn Bhd: Structural Integrity Assessment of BNDP-B Platform for Baronia IWAG Pilot project (Brownfield engineering)
The 8-legged jacket platform is located in Baronia field in South China Sea. It has got three decks namely cellar deck, main deck and helideck. A new set of equipments necessary for water injection are to be installed on the main deck.
Responsibilities Include-
- Detailed In-place Analysis of the existing platform (Topside & Substructure)
- Structural Integrity assessment of the main deck & Deck Strengthening
- Check the pile capacity for new set of imposed loading of total Water Injection Package

Other Projects (Brownfield engineering):
* Petronas Carigali - Preliminary Structural In-place Analysis & Strength Check for Topside & Substructure in CTU/Cement Squeeze Operation
* Sarawak Shell Berhad - E11DP-A Platform: In-Place Re-Analysis For Topside & Substructure For West Alliance Rig Entry (Drilling @ Well Slots #13, #19 & #20) After Modification/Extension In Main Deck & Cellar Deck
* Sarawak Shell Berhad - SFJT-B Structural Assessment For Coiled Tubing Unit & Sand Clean-Out Operation Substructure Inplace Re-Analysis (South Furious field)

Oct. 2005 to Jul'2007 WS Atkins & Partners Overseas ¡V Sharjah, United Arab Emirates (www.atkinsglobal.com)

Position: Senior Structural Engineer (Oil & Gas Division)
Qatar Petroleum- Detailed Engineering of New Boatlanding in PS-2 & PS-3 Fields in the Arabian Gulf ( Dec'2006)- Brownfield Engineering
Six (6) nos of existing old boat landings of the existing jacket platforms shall be dismantled and replaced with new boat landing structures with enhanced facility of handling boat impact loads corresponding to a vessel of 2200 MT design displacement. Structural Adequacy of the connecting jacket members and boat landing supports shall be also checked to ensure structural safety and stability.
Responsibilities Include-
- Detailed In-place Analysis of Boat landing structure using SACS 5.2
- Progressive Collapse Analysis of Boat Landing Structure
- Checking the Local Structural Integrity of jacket legs at Boat Landing Supports and other Boat Landing Connections
- Lift & Transportation Analysis of New Boat Landing Modules
- Deterministic Fatigue Analysis of Boat Landing Structures

Saudi Aramco - McDermott (Dubai) Jackets & Topsides ¡V March (2006)- Greenfield Engineering

Detailed Engineering/Design for Two (2) numbers of Well Head Jackets and Four (4) PDMs (Topsides) to be installed for Saudi Aramco with McDermott as their main contractor.
Oil field located in offshore Arabian Gulf with water depths of 34.3m & 48.0m with 10 conductor wells, risers & J-tubes. The production platform consists of 4-legged Jacket and Production Deck Module having 5 decks (Main, Well Access, Lower & Upper Mezzanine, Helideck) with process, piping, mechanical & electrical equipments. The jacket legs are battered in two directions and supported on driven piles up to a max. depth of 55 meters.

Responsibilities Include-
- Detailed In-place Analysis of Jacket and Topside using SACS 5.2
- Determination of Pile Penetration based on Ultimate Pile capacity under different conditions namely Operating, Storm Environments, Boat Impact, Pile Pull-out case
- Offshore and Yard Lift Analyses of Jacket and Topside; Design of Lifting Aids ( Pad Eyes, Trunnions etc)
- Transportation Analysis of Jacket & Topside and Design of Sea-fastenings
- Spectral Fatigue Analysis of Jacket structure
- Analysis & Design of Boat-landing
- Design of Anodes (Cathodic Protection) as per DNV RP B401:1993
- Analysis & Design of Helideck as per API RP 2L & CAP437
- On-bottom (Un-piled) Stability Analysis of Jacket Platform
- Design of Mud Mat, Stiffeners & Plate
- Design of all Primary & Secondary Steel components
- Design of Walkway against Vertical & Horizontal Wave Slamming
- Design of Stairways in Wave Zone

Toreador Turkey Ltd. - SASB Offshore Tripod Jacket & Deck ¡V Turkey Black Sea (Jan 2006) ¡V Greenfield Engineering

Oil field located 18 km offshore black sea with a water depth of 78m and with 3 conductor well. The unmanned well head platform consists of deck with process and piping equipments at three deck levels supported on a tripod jacket. The 2 legs of jacket are battered and supported on a driven skirt piles and third leg is vertical with pile and one of the conductors inside.
* Performed activities as Senior Structural Engineer and Geotechnical Specialist
Responsibilities Include-
- Conceptual Design of the Jacket and the Deck
- Detailed Engineering for Jacket and Deck
- In-place Analysis of Jacket and Deck Structure integrity of the platform by SACS
- Seismic Analysis for the platform using SACS Dynamic Response Module
- Dynamic Spectral Fatigue Analysis of the Tripod using Wave Response Spectrum
- Installation Engineering ¡V Lifting, Towing, Floatation & Upending Analysis, Un-piled Stability Analysis
- Detailed Pile Drivability Analysis (Bearing Graph, Drivability & Inspection Chart) using GRL WEAP 2003 software
- Checking the adequacy of the hammers available with the contractor and Recommendation of continuous driving at certain specified depths to avoid soil set-ups and early refusal (i.e. Under-drive)
- Comparative study of GRL WEAP Drivability results with the site results of dynamic Pile test; Subsequent selection of Gain-loss factors; Prediction of Soil Resistance to Driving for other piles in the same field.
- Development of P-Y, T-Z & Q-Z Curve for Non-linear analysis of pile-soil interaction using SACS PSI Module based on API and ICP methods.
BUNDUQ Oil Co. Ltd, Abu Dhabi (2005-2006) ¡V Brownfield Engineering
Detail Engineering for the modifications associated with increasing the accommodation capacity by about 20% (projected capacity - 145) and other related facilities on the offshore Living Quarter Platform (LQP) in El Bunduq Complex in Abu Dhabi Offshore.
* Performed as Senior Structural Engineer
The specific work carried out included the following activities:
- In-place & Lifting Analysis of 3 nos. Accommodation Modules;
- Lifting Analysis and Design of Pad Eyes
- Modifications inside the LQP Module to convert some rooms to bed rooms and expand the kitchen, dining & toilet facilities.
- Preparation of Design Basis, Specifications, Drawings and MTO's for Structural & Architectural Modifications
- Preparation of Scope of Work for Construction Contractor, Cost Estimate & Project Schedule

Gulf Piping Company (GPC, Abu Dhabi/Qatar Petroleum Development (QPD), Qatar (2005)

Full Field Development of Al-Karkara and A-North: Detailed Engineering & Design for Offshore Facility Construction.
* Performed duties as Senior Structural Engineer
The specific work carried out included the following activities:
- Detailed Engineering/Design for Two Number, 3-Legged Well Head Platform (KK-1 and AN-7) and One Number, 4-Legged Compressor Platform (GIP)
- In-place & Fatigue Analysis of KK-1, AN-7 and GIP Jacket Platforms
- Lifting Analysis (Jacket and Deck) and Un-Piled Stability Analysis of KK-1, AN-7 and GIP Jacket Platforms
- Design of Boat Landings for KK-1, AN-7 and GIP Jacket Platforms
- Design of Secondary Steel for all the above platforms
- Checking of all AFC Drawings produced by the Designers
- Design of all Installation Aids

2000 to 2005: Zentech India Offshore (www.zentech-usa.com) at their Mumbai office, INDIA. Zentech has its head office at Houston, Texas, USA.

Position: Senior Structural Engineer
Work Experience with Jacket Platforms located in the Gulf of Mexico (GOM). Hands-on experience in Brownfield engineering projects pertaining to Jacket Platforms.
The scope of work involved:
- Computer Aided Design and Analysis of Offshore Jacket Platforms
- Geometric Modeling & Environmental Load Generation (Storm & Operating) using StruCAD*3D software
- In-place Stability and Dynamic Spectral Fatigue Analysis
- Non-linear Wave and Seismic Pushover Analysis using USFOS software; Calculation of Reserve Strength Ratio (RSR) of jacket platforms
- Damage Pushover / Redundancy Analysis and Calculation of Residual Influence Factor of Jacket Structure
- Transportation Analysis of Jacket Structures; Design of Sea Fastening
- Leading a group of Draughting Personnel / Designers
- Preparation and Compilation of Detailed Design report
- Load and Stability of Spars, Jack-up and Semi-submersible rigs.
- Evaluation of API soil curves (T-Z, Q-Z, P-Y curves) to idealize soil stiffness for offshore piles as geotechnical expert
- Thorough knowledge of Pile-Soil interaction for offshore structures and expertise in interpretation of laterally and axially loaded pile behavior for offshore structures. Development of Independent Software Application for generating T-Z, Q-Z and P-Y curves as per API RP 2A guidelines.

LIST OF SOME SELECTED PROJECTS
* Name of Project: Re-assessment Study of Jackets (8 legged & Tripod) in Gulf of Mexico
* Client: Petroleos Mexicanos (Pemex), Mexico

Detailed Structural Re-assessment of 8-legged Jacket Platforms with 3-Level Deck Topside located in AKAL-M field of Gulf of Mexico and Tripod Platform located AKAL-H field of GOM having water depth in the range of 50m to 60m.

* Name of Project: Set-up of Stability Program for Jack-up rigs
* Clients: Arab Drilling Corporation, Lamprell at Dubai

Providing Stability Calculation of Jack-up during Ocean Transit, Offshore Drilling Operation

* Name of Project: Set-up of Stability Program for Spar, Semi-submersible
* Client: Noble Drilling Company, USA

* Name of Project: Weight Management System for Spar Rig
* Client: British Petroleum, Kerr McGhee, USA

* Name of Project: Transportation Analysis for Topsides on Barges
* Client: Petroleos Mexicanos (Pemex), Mexico

Detailed Transportation Analysis of 4 Deck Topside and Design of Sea Fastening for AKAL-G field in Gulf of Mexico.

* Name of Project: Load out analysis and sea fastening design of bridge And flare boom structure
* Client: Damus Limited

1996-2000 STUP Consultants Limited (www.stupworld.com) at Mumbai, INDIA
Position: Senior Design Engineer and Specialist Geotechnical Engineer.

The gamut of works involves:
* Structural (Reinforced Cement Concrete) and Geotechnical design of all sorts of foundations (Shallow and Deep), Bridge Piers
* Field supervision of soil exploration in a no. of highway, bridge and ground improvement projects on behalf of consultant.
* Detailed analysis of soil investigation reports, engineering interpretation of all soil parameters, adoption of suitable geotechnical parameters for the analysis and design of shallow (Isolated, Combined, Raft footing) and pile foundation (bored cast-in-situ as well as driven piles).
* Geotechnical (in terms of calculating ultimate and working load carrying capacities) design of pile, its structural design using STAAD III software
* Stability analysis of highway embankments using self-developed computer programs for the prestigious project like Mumbai-Pune Expressway
* Ground Improvement scheme design (in terms of Band drain / Sand drain / Stone Columns) for embankment on weak soil (Mumbai-Talasari Expressway)
* Design of grouted rock anchors for the rock slope stabilization at Kalachowky, Mumbai
* Analysis and design of RCC / PCC earth retaining structures in a variety of field situations (horizontal and inclined backfill)
* Analysis and design of Box / Portal culverts resting on weak foundation soil

OFFSHORE VISIT EXPERIENCE & TRAINING:
* Visited & conducted extensive site surveys of the following:
o Jacket platforms of Bunduq Oil Co. Ltd. in Abu Dhabi offshore, UAE.
o Jacket Platform in PS-2 & PS-3 Oil Fields in Qatar Offshore ( Qatar Petroleum)
* Attended Offshore Safety Training courses by Bunduq Oil Co. Ltd.
* Successfully completed Offshore Sea Survival Training, Helicopter Under Water Escape using EBS (Emergency Breathing System), Hydrogen Sulphide Safety training and Shell Permit to Work in a 6 day long comprehensive training course conducted by SMTC Global Services (Year 2008)

COMPUTER PROFICIENCY:
* Operating Systems: Windows, MS-DOS, UNIX
* Programming Languages: MS Visual C++6.0, Digital Fortran 6.1A, OPENGL
* Structural Analysis/Design Packages: SACS 5.2, StruCAD*3D, USFOS, STAAD-PRO, GRL-WEAP 2005
* Additional Software Packages: MS Office, MS Project, Power Point, AutoCAD, MATLAB
STRENGTHS:
* In-depth knowledge of Structural Analysis & Design of Offshore Platforms
* Specialized Expertise in the field of Geotechnical Engineering
* Excellent Communication (Verbal & Written) Skill in English
* Co-operating Team-man
* Inspiring Leadership Skill to lead a team of Junior Engineers and responsibility for Quality Assurance of Design
* Continual Pursuit for Improvement in Quality of Engineering Deliverables
* Fluent in using various computer technical softwares

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 10917)

Go to Search Parameters...

Brief Description

A highly skilled Petroleum Engineer with over 20 years domestic and international experience in Petroleum Industry as a Petroleum Engineer, experience in reputed International Service Company

A Bachelor's degree holder in Chemical engg, have about 20+ years of Hydro carbon Industries experience both in Oil & Gas refineries and Oil production facilities. Having very good knowledge and trained in Fire fighting techniques and Plant safety equipments.

Industrial, B2B and Retail sales & marketing of ‘Fuels, Lubricants and other Petroleum Products’

Management Consultant / Project Manager / Business Process Analyst – task oriented, problem solver with successful experience in planning and implementing operational enhancements in support of critical business processes.

20 years of extensive knowledge and experience in Production, Quality Assurance & People Management in chemicals & petrochemicals plants, presently associated with YANSAB, Yanbu (Kingdom Of Saudi Arabia).

A TWI certified and registered welding inspector (CSWIP 3.1) and worked as Field Piping Engineer with fourteen (14) years extensive experienced in oil and gas construction projects, refineries, gas plant, GOSP, power plant and desalination plant. Major activities involved general oversight of the

Graduate in Mechanical Engineering having 15+years in Static Equipments & Packages Design & detail engg. engaged in Design & detailed engg. of pressure vessels, Columns for Oil & gas Applications and all other types of static equipments & packages, I have a good exposure in EPCM

I am a B.Tech (Production Engg) graduate with Nace certified Level-I coating inspector, I have more than 16 years exp in various fields including 8 years in coating field. Also I was handled various pipeline projects in oil & gas field for 5 years

I am a post graduate in chemistry working as Senior Chemist in KOC.Well experience in crude oil, Gas and Water analysis. Handling of all kind of Lab Instruments,Calibration ,standard chemicals preparation, reports making are the responsibilities.

Lead/Senior Mechanical Engineer- Oil & Gas, Chemical, Petrochemical and Energy Industries

Free! Oil and Gas Industry onshore construction civil engineering Superintendent with 20 years experience in overseas projects.

I am a B.Sc Chemistry degree holder and have totally 24 years of very good experience in PROCESS FIELD / PANEL operations in oil/gas treatment plant. This is one of the biggest oil processing plant in India. SOUTHERN PETROCHEMICAL INDUSTRIES CORPORATION LTD., (SPIC).

Twenty plus year's progressive experience in heavy industrial design, development, and construction for petrochemical refineries, upstream petrochemical, waste water treatment, power generation, chemical demilitarization facilities, Microchip facilities, LPG gas transitions, and the food & beverage

I am very talented and a hard worker. I have a good eye for any type of construction.

Outstanding background of knowledge’s into oil and gas processing and utilities, more then 14 years experience into commissioning and process activities from which more than three years offshore, working into an multicultural team and with all disciplines engineers, proactive and disciplined

24 years of experience in Upstream And Downstream (Refinery) Oil & Gas Operations and Process Engineering out of which:

20 years experience. Executive with proven management, operations, P&L management, and business law experience. Communicator, negotiator, and capital raiser. Global, regional, and country specific business expertise.

Challenging job related to oilfield, where I can capitalize on my 23 years of oilfield experience with Schlumberger in management, sales, marketing and contracts negotiations. No geographical preference. No schooling constraints.

20+ years experience in private/public sector contract, program/project mgmt. Domestic & international E&P and technology development with major/independent/service companies. Identified significant oil/gas reserves through innovative mgmt. of multidiscipline teams.

Geophysical modelling Rock physics, AVO, Pre-stack and Post-Stack Seismic Inversion, seismology, reservoir characterization, Interpreted seismic data (3D, 2D) & amplitude analysis using Seisworks, PostStack/ PAL, IESX, and EarthCube. Certified Landmark Graphics instructor

I have completed a BSc in Geology and a PhD in Petroleum Engineering. In the last 20 years working for BP I have worked as a Production Technologist, Completions Engineer, Reservoir Engineer and in Production Operations, both onshore and also offshore on an FPSO, in recent years as a Team Leader.

Geophysicist, 4+ years of experience in the seismic data processing onboard & in data processing center. Ph.D. in the field of Geophysics. Skills: Seismic Data Processing (2-D/3-D) by ProMax & Focus, imaging by Geodepth (Depth-Velocity modeling, Depth Migration), AVO analysis by Probe.

Reservoir Engineer with over 20 years of experience in international oil company, consulting/software company and consulting company both in technical capacities and management and business development.

field appraisal, depletion, material balance, well test, reserve estimates, water injection, fractional flow, gas injection, reservoir evaluation, production forecast, reservoir and production monitoring, data acquisition, multilaterals, development projects, reservoir modelling and simulation.

7 years experienced in Oil Refinery Operations . 8 years experienced in Petroleum and Gas Processing Engineering (Design, Research and Development of Oil Refinery Processes). 5 years of international exposure in Europe , Asia, Africa, Middle East .

I have a record of outstanding success in the field of Instrumentation Engineering for the past 20 years with various clients and consultants in India and overseas for the Oil & Gas (both onshore and offshore upstream)/Petrochemical/LNG Projects/Plants.

Professionally Qualified Engineer / Manager, Harvard Business School Alumni, Certified Project Manager (PMP) - Now In General Management In Oil & Gas Up & Mid Stream

I graduated from Sultan Ageng Tirtayasa University, in Indonesia on October 2004, majoring Chemical Engineering Degree. I have experienced working in petrochemical plant. During 10th years I have ever been worked at PT. Asahimas Chemical Indonesia ( VCM/EDC Plant ) from 1997-2007

City and Guilds Motor Mechanical Technician Diploma and full tech certificate. Languages: English, Arabic and French Spoken fluently

PDS Frameworks, Autocad, Microstation

Objective. Seeking an increasingly responsible position with an opportunity for professional challenge and growth while combining my areas of experience in the field of electrical works to support and enhance corporate goals and objectives. Educational Qualification. 1.Diploma in Electrical Engineer

Trained Radiation Protection Officer & Health Physicist from India

I have sailed as Master on Tankers and have good experience in Oil / Chemical / Gas Tankers.

Skills: •Able to take proper and quick decision. •Very much interested to work in technical environment. •Excellent ability of producing and reading working drawings. •Able to work alone or in team very environment. •Able to manage all aspects regarding to engineering. •Electronics understanding

I am a dedicated, performance and goal oriented multi-tasker who will do whatever is necessary to help the company reach its maximum potential.

Applying for the post of HSE CO-Ordinator

Assist sales team in all technical challenges while meeting with clients, check & modify well plans,calculate Torque & Drag, drill string & BHA assembly,hydraulics,• Managed and maintained up to 45 jobs in Southern Manitoba, Southern Saskatchewan, all of Alberta and Northern British Columbia.

28+ years with broad experience in Petroleum Engineering (Facilities, Production, Reservoir, etc.). Onshore, offshore, international. Any location considered. Rotational position preferred.

A self starter, motivated and eager to learn new things, willing to provide guidance and help others become team players by setting an example and leading the way.

Seeking a challenging position in Chemical, Oil-Refining, and Petrochemical Engineering field where my technical, professional, and problem solving skills can best be utilized for the future growth of the company.

Drilling Supervisor/Engineer with B.S. in Petroleum Engineering and 30 years experience.

Senior Offshore Structural engineer with 13 year of post graduate experience in analysis & design of offshore structures

Strong managerial and technical skills successfully proven in planning, executing and managing business process, projects and Drilling & Warehouse operations, delivering timely results. Analytical, client-oriented, problem solving, leadership and communication abilities complement my professional

20+ years experience as Piping Designer in FEED, EPC, EPCM, Detail Engineering in Oil & Gas, offshore,Petrochemical,and Refinery & Chemical industry.

Management and supervisory skills

I am a Senior Petroleum Engineer Technologist with over 20 years oil and gas experience. My diverse background provides a comprehensive knowledge of all aspects within the petroleum industry.

Experience in Pre-commissioning, Commissioning, Startup,Operation and Trouble shooting.Acquaintance in Panel operation. Experience in operating Distillation Columns; Experience in Water Treatment/Waste Water Treatment; Driving HSE performance; Knowledge in Computers and Operating System. Acquainta

Experienced, registered professional petroleum engineer with 20+ years direct petroleum-related experience. Two graduate degrees in Petroleum Engineering (Stanford University). Extensive management experience with senior technical professionals in all related disciplines.

Consultant in well stimulation, well completion, production operations and reservoir engineering. Designed and supervised: - Hydraulic fracturing and TIF, Western Siberia - Massive hydraulic fracture in very high temperature reservoirs - Matrix acidizing, acid fracturing, scale control

I put at your disposition 23 years of experience in the laboratory and field activities at PDVSA-Intevep, Research Center and Technological Support for the Oil Industry of Venezuela, with the drilling & completion and materials performance groups for production operations.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out