Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #81792 next resume »»
CONTACT INFORMATION:
View contact information...

PROFESSIONAL EXPERIENCE

May '08 – Dec '08 ConocoPhillips, Sembawang Shipyard
Instrument Technician Bohai Bay FPSO Phase II

Scope of Works: Responsible for calibration, testing & commissioning of Instruments for Crude Oil Emulsion Centrifuge System, Co-ordination with vendors for the communication signals (Modbus & TCP/IP) between Unit Control Panel and the Process Control in Central Control Room.

Mar '05 – May '08 ABB Industry Pte Ltd, Singapore.
Application Engineer.

Projects: 350MW Thermal Power Plant, Uong Bi, Vietnam, Excitation System for Seraya Power Plant, Singapore, Multistory Commercial Building, Singapore & Changi Water Treatment Plant, Singapore.
-Design & Co-ordination for Input / Output List for Control System in Thermal Power Plant.
-Responsible for the coordination submission of shop drawings for Multistory Building.
-Commissioning of Process Control System involves 3MVA Transformers, 1800KW Motors and Variable Frequency Drives.

Aug '03 – Dec '04 Kumagai–Skanska-HCC-Itochu JV, Senior Electrical Engineer.
Delhi Metro Rail Project, India.

Scope of Works: Electrical & Mechanical Installation includes Electrical, Environmental Controls, Fire, Hydraulic & Building Management systems for Underground metro project for 4 stations including 4.2 km cut & cover tunnel works.
-Checking of drawings submitted by the sub contractors for the services against the tender drawing and contract specifications.
-Co-ordination of E&M services with respect to structural openings during construction.
-Co-ordination with various system wide contractors like Signal & Telecom, HT & Traction power, AFC gates, Lift & Escalator contractors for their service installation.

Dec '02 – Jul '03 Jurong Shipyard, Electrical & Instrumentation Inspector.
HALLI BURTON in FPSO Conversion Project.

Scope of Works: Responsible for quality checking and ITP inspections in accommodation blocks office main deck, operation deck Lower & Upper Platform in Jurong shipyard. Pre-commissioning checks & commissioning of Fire & Gas Instruments, Electrical Installations, Ventilation and AC units. Preparation of ITP and clearing of punch list.

Aug '02 – Oct '02 Equator Engineering Sdn Bhd, Electrical Engineer
350 MW Combined Cycle Power Plant, Penang, Malaysia.

Scope of Works: Testing & Commissioning of Analog & Digital Instruments like Pressure, Temperature, Flow & Level Transmitters

May '00 – May '02 AMEC Group Singapore Pte Ltd,
Electrical Construction Engineer.
North East Line MRT Project, Singapore.

Scope of Works: Electrical Installation includes Main LV Switchboards, Distribution Boards, Cables, Bus Bar, Lighting, Power and Lightning Protection.
-Responsible for Co-ordination with Civil contractors and other System wide Contractors for the requirement of power supplies to their equipments.
-Supervision & Control over the installation of works by Subcontractor.
-Progress monitoring using work packs, attending co-ordination meeting, liaise with Design department, attending clients meeting, and following up material deliveries.

Feb '00 – May '00 Montgomery Watson Asia, Electrical Technical Officer.
Kim Chuan Sewage Treatment Works Project, Singapore.
Scope of Works: Consulting service to the refurbishment and extension of the above project.
-Review contract documents & specifications.
-Review drawings by the Contractors.
-Attending Inspections and witness tests.

Dec '98 – Feb '00 HTE Engineering Pte Ltd, Project Engineer.
HDB Flatted Factory, Bukit Batok, Singapore.

Scope of Works: Installation of LV Switchboard, Distribution boards, Bus bar, Cables, Lighting, Power and Lightning Protection.
-Supervision & Control over the installation of works by subcontractor.
-Prepare Shop drawing from the contract drawings by considering the possible implementation and comply with design requirement.
-Liaise with consultant on any design discrepancies, with the suppliers for the catalogue and sample submission, with purchase department for the material requirements.
-Attend co-ordination meeting with main contractor and other domestic contractors.

Jun '98 – Oct '98 Babcock –Hitachi K. K, Assistant Commissioning Engineer.
2 x 600 MW Steam Turbine Power Project, Tuas, Singapore.
-Responsible for the Energisation of MCC's and Motorized Valves
-Responsible for the Sequence & Functional checks for the Motorized Valves.

Jul '97 – May '98 The General Electric Company (S) Pte Ltd, Project Engineer.
New Nanyang Polytechnic, Ang Mo Kio, Singapore.

Scope of Works: Installation of LV Switchboard, Distribution boards, Cables, Lighting, Power and Lightning Protection.
-Supervision & Control over the installation of works by subcontractor.
-Liaise with Consultants on design requirements.
-Co-ordination with Main Contractor & Sub- Contractor to ensure that works progress meet Master Project Schedule and project milestones.
-Led a team of supervisors, foreman & electricians to ensure the completion of critical activities.
-Sourced materials and liased with vendors on delivery requirements.

May '94 – Jan '97 Equator Engineering Sdn Bhd, Electrical Engineer.

Project: 4 x 150 MW Hydroelectric Power Project, Kota Bahru, Malaysia.
Client: GEC (M) Sdn Bhd Period: Mar '95 – Jan '97

Scope of Works: Erection of Generator, Transformers, Auxiliary Transformers, Isolated Phase Bus Bars, Generator Circuit Breakers, 6.6 KV Switchgears, LV Bus Ducting, Switchboards and Control panels, MV & LV Cabling and Termination and Earthing Installations.
-Supervision & Control over the installation of works by subcontractor.
-Led a team of direct supervisor and skilled worker to meet the critical deadlines.
-Liaise with clients regarding technical queries and design criteria.
-Maintaining the progress records using Computer Based Project Management System (CBPMS).

Project: 3 x 110 MW Gas Turbine Power Project, Johor, Malaysia.
Client: John Brown (M) Sdn Bhd. Period: May '94 – Mar '95

Scope of Works: Erection of 33 KV Auxiliary Equipments, Landing Gantries in Switchyards, and Installation of Switchboards, Charger Panel, and Control Panels. Installation of Power, Control and Instrumentation Cables, Lighting and Small Power in Control Building
-Supervision & Control over the installation of works by subcontractor.
-Prepared weekly schedules, prepared daily and weekly progress reports.
-Submit claims for variations works.

Aug '92 – Dec '93 Meeco Graphics, Service Engineer.
10/1, Queen's Road, Bangalore, India.
-Troubleshooting of photocopier PCB Boards.

EDUCATIONAL QUALIFICATIONS

Bachelor of Engineering (Electrical & Electronics Engineering)
University of Madras, INDIA. Year of Graduation: 1992

TECHNICAL QUALIFICATION

Post Graduate Diploma in Microprocessor & Computer Hardware (PGDMH)
National Center for Computing Techniques, Bangalore, INDIA.

COMPUTER SKILLS AutoCAD, MS Office & Microsoft Project

PERSONAL PARTICULARS

Date of Birth 18th April 1970
Nationality Singapore Citizen
Sex Male
Marital Status Married
Driving License 2A/3
Language Spoken English, Tamil & Malay
Language Written English & Tamil

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1151 to 1200 of 10903)Go to Search Parameters...
Brief Description
I have 14.5 years of experience in the field of instrumentation/control system engineering for Oil/Gas industry. I have served with Reliance Industries Limited (A Indian largest Oil/Gas/Petrochemical Company ) & and SABIC (A Saudi Arabia largest Oil/Gas/Petrochemical Company).
More than 15 years of comprehensive knowledge and experience in the field of electrical and instrumentation engineering. Over 12 years of involvement in inspection and construction of Oil & Gas, Petrochemical, and Utilities Plants. Have good knowledge in implementation of SHELL DEP (Design and Engin
Pre-commissioning, commissioning, de-commissioning & Re-commissioning of Hydrocarbon tanks/LPG bullet/Double Wall Ethylene tanks & hydrogen bullets(150 kg/cm2) for statutory inspection ,Gas Turbine commissioning, Safety measures in Hydrocarbon storage, loading & handling system, SAP Operation
More than 15 years total experience on combined field in construction, inspection, engineering project management, commissioning and maintenance of instrumentation and control on gas and oil production facilities, geothermal, power, petrochemical and oleo chemical refinery plants. Extensive knowledg
Analyst/Technical Assistance for reservoir/production operations
I have extensive experience as a process engineer in refining and oil production that I would like to put to use in a technical service or economics and planning management position.
Chief Engineer/ Barge Mechanic with work experience more than twenty years incl. 8 years of Offshore (Juck-up's - 5 years). Education: Maritime Academy (five years course). CEng, MIMarEST.
Vast experience in Well and Reservoir Surveillance, Integrated Reservoir Studies, Integrated Production Systems Modeling, Well Optimization Production Engineering and Hydrocarbon Accounting. Proven record of accomplishments in deepwater production operations in the U.S. and West Africa
Electrical Engineer
Twenty-Eight(28) years of progressive experience in Piping Design with function relevant to all aspects of Font End Engineering and Design, Plant Layouts, Piping Layouts, Isometrics, Material Take Off, Stress Analysis, Procurement and Preparation of Specifications, Plant Modifications, etc.
Experienced production supervisor
Observer / Senior Observer /Chief at Schlumberger -WesternGeco International Resources ( WGIR Libya 3 D Projects ) with Sercel 408 UL CMXL /428 Recording instruments and VE432/64 vibroseis electronics using source navigation
To apply my skills as I am very much fascinated by Power & Desalination Plant Process Quality Control & Environmental Laboratory chemist. I would strive to learn new developments in boiler water treatment & Environmental sciences so that I can carve a place for myself in this field.
Over 13 years piping stress and mechanical engineering experience with EPC companies in Sinopec, China, Fluor Canada and Jacobs Canada
Joined E & P Company in 1989 and have worked in both onshore and offshore at different positions. As co man supervise operations on Desert Rig deployed for drilling and work over wells. Prior to current assignment worked as co man on jackup rig. Ensure operations are carried out safely & efficiently
My various experience in the Safety field has included so far about three years in KCA DEUTAG Drilling GmbH Company drilling company as Rig-site HSE Advisor in Libya,four years position as HSE Coordinator at Drilling Waste Management Company(Tunisian company),Prior to that I was a Chief of District
Having substantial knowledge and experience (14 years) in Piping/Mechanical engineering, especially in the Piping Engineering and Design. Involved in industrial plant, petrochemical. Expert in PDMS, including Design, Draft, Isodraft and ability to design and drafting Pipe support using MDS
Senior Welding Inspector QA/QC
Total experience of 20 years of which 2 years in Overseas as a Process /DCS Plant Operator In various Gas, Refinery, Petrochemicals & Fertilizers Plants.
27 years experience as Drilling supervisor.
Under Ground Piping Specialist
Engaged for more than 14 yrs in extensive work in the field of piping, structural and welding inspection, supervision of piping, erection, material preparation and scheduling based on the given scope of work.
Accomplished petroleum exploration and production manager of people and projects. Proven broad-based experience in multi-disciplinary exploitation of petroleum reserves, evaluation work in acquisition and divestitures, information technology and project management.
Twenty-Four years experience in the administration of Oil & Gas property documentation inclusive with, land management, mineral leasing, landman duties encompassing lease conversions, reimbursements, compensations, and shut-in royalties. Serving as a generalist for my first ten years and as a speci
A Civil/Structural Engineer having 14+ years of Consultancy experience in Structural Design and Project Management for Process, Oil & Gas and Power & Energy Projects. I have good knowledge and experience of Canadian, British, Indian, American & various Process industry standards.
Control System engineer with more than 14 years of experience with Yokogawa Systems Engineering
20 Years plus: Industry sector, Expertise Platform construction, Fitter/Mechanic, Contract Supervisor, Offshore Heath & Safety, Supervisor/Trainer, Drilling Offshore, Rig Mechanic/Chief Mechanic, Drilling Onshore & Offshore.
40 Years Experience - Drilling Sector - Experienced Drilling Consultant / Superintendent, Work-Over/Completion
Electrical & Instrumentation Engineer experienced in Testing & Commissioning Instruments in FPSO, Installation of Electrical services in the Power plants (Gas turbine, Hydro, Steam turbine), Commercial Buildings, MRT and Commissioning of Process Control System in Water Treatment Plant.
APPLICATION FOR THE POST OF BLASTING AND PAINTING SUPERINTENDENT
I have different skills from farming to superivor to general labor skills inthe oil and gas industary.amd also I have some sales experance
Worked in Precommissioning,commissioning,start up of Refiner, Petrochemical, GasPlant,worked on DCS system and fields aswell,Fully ocnversant with HSE policies. Undergone training of Fire and Gas.
Lead Drilling Fluids Engineer / Mud Engineer / Drilling fluids specilalist/ Mud Manager/Drilling Supervisor/ Drilling Engineer
Drilling, Completion Wellsite consultant
I am Mech Engg post graduate(Prodn Engg). I have experience in using CAE packages Hypermesh,Ansa and Nastran and performing static ,Normal mode and fatigue analysis
28 years experience with industrial design drafting work. Assignments have involved equipment layouts, P&ID development, material take-offs, estimating, checking and field work in addition to developing construction drawings and fabrication isometrics.
Electrical Technician with 20 years experience in the oil and gas industry.
Executive Recruiter, Recruiter, Contract Recruiter
am right now working at OXY in Santa Cruz with WO & Completion jobs related.( as a work over site Manager) am interested in your global opportunities so Ihave attached my resume with actual phones and emails.I have experience managing different kind of peoples and oil specialties.
been welding for 25 plus years...
A total of 10+ years experience in Pipe Stress Engineering and Mechanical Stress Analysis in
Good knowledge in delivering commercial operational management including specialist area of hydrocarbon business and regulatory compliance and administration (Production Sharing Contract, Joint Operating Agreement and Gas Sales Purchase Agreement, fiscal terms)
QA Manager with 23+ years diverse experience
All STCW certificates are valid and available
Water-flooding, reserve estimation, production forecasting, economic & risk analyses, reservoir characterization, tracer & pressure transient analyses. Well surveillance for development opportunities. Some thermal experience. Simulation experience to predict performance & optimize development plans.
Application For Mechanical Inspector/Engineer
Having 14 plus years experience in EPC projects in the area of Construction, Process and Equipments, Installation, Commissioning, Preliminary & Detail engineering & Project Management system, in Oil & Gas, Petrochemical, Chemicals sectors, etc.
Having 20 years of professional experience in various aspects of Detailed Engineering, Pre-bid engineering and Construction supervision & commissioning activities related to Control & Instrumentation (C&I) System for Oil & gas, Refinery, LNG & Petrochemical and power plants.
Petroleum Engineer with 13 years experience in the Oil and Gas Industry with solid knowledge in Geopressure analysis, Well design, MWD operations and rock properties analysis; project management skill (estimating/cost, control/scheduling); bilingual Spanish-English; APEGGA EIT# 92804 and Worldwide.
To obtain a position as Suitable position in process control Instrumentation that allows me to expand my current skill set with technical challenges and career development opportunities to enhance the achievement of corporate goals.
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   [ 24 ]   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com