Resume - 20 Years plus: Industry sector, Expertise Platform construction, Fitter/Mechanic...

Misco Jobs

Resume #81832

CONTACT INFORMATION:
View contact information...

OBJECTIVE: To gain permanent employment commiserate with my 20 years + experience and help improve the safe operation of the company. Train Nationals and other inexperienced personnel.

AREAS OF EXPERTISE:
Industry sector Expertise
Platform construction: Fitter/Mechanic, Contract Supervisor.
Offshore Heath & Safety: Supervisor/Trainer.
Drilling Offshore: Rig Mechanic/Chief Mechanic.
Drilling Onshore: Rig Mechanic/Chief Mechanic.

EDUCATION & EXPERIENCE
Education Level: Year 12 High School, Trade College 7 years, Senior Mechanic
Oil & Gas experience: 20 years+ on and offshore.
Non Industry experience: Australian Army Warrant Officer class 2, 9 years.

EMPLOYMENT
Current
Experience: Chief Mechanic on stand down with Nabors Drilling Saaudi Arabia [contract completed]. Duties were complete refurbishment and commission of 3 land drilling rigs. 1 Cabot 2000hp and 2 Cabot 1500hp land rigs.Rig 660 Jack Up. Day to day running of the rigs, preventive maintenance and repair of all rig equipment including SCR units, pumps, hydraulics, pnuematics, BOPS, Koomeys, cyber chair drawworks etc. Supervision of mechanics, stock and cost control, parts procurement, report writing and maintenance of PM reports on company computer programme. Health and safety of mechanical section staff.

Current/
FEB 2007: 2008 Nabors (Sundownwer) Offshore West of Mumbai. Service technician maintenance, Supervisor workover, infill drilling, complete down hole refurbishment, new packers, production sting, well heads.

FEB 2007/
SEP 2005: Nabors International Drilling: Peoples Republic of Yemen. Maintenance Supervisor.
Parcor 1200hp Mechanical rig. Caterpillar 3512B and 3516B, D 398, D 379, 3412 and Gardner Denver PZ10 Mud Pumps. Computerized rig reporting system.

Pyramid 1500hp SCR rig, fully refurbish rig for 3rd party inspection for new contract.
Upgrade engines to Cat D399, fit new 4 bay Ross Hill SCR unit.

AUG 2005/
DEC 2000: Nabors Drilling Ecuador: Chief Mechanic.
Cabot 1500hp, convert this rig from a mechanical rig to an SCR configuration and fit 350 Can Rig top drive, Caterpillar D 399, 3412, GM and Deutz engines. Gardner Denver PZ11 Mud Pumps, Computerised rig and mud reporting system.

DEC 2000/
SEP 1998: Nabors Drilling, Peoples republic of Yemen, Chief Mechanic.
Parcor 3000hp land rig, Cabot 1000hp Completion and Workover rig. Duties were as above, included maintenance and repair of remote water well pumps and engines, mobile cranes, forklifts and company vehicles.

AUG 1998/
SEP 1997: Parker Drilling, Papua New Guinea, Senior Rig Mechanic.
Parcor 3000hp land rig with Tesco top drive. Duties as above also included the stacking and re-commissioning of the rig for Helicopter rig relocation.

MAR 1996/
DEC 1981: Esso [Australia] Bass Strait Victoria, Fitter/Mechanic, Rig Mechanic, Chief Mechanic.
1994/1996: Chief Mechanic/Contract supervisor.
$18m upgrade and refurbishment of Whittaker 36 and 26 man offshore escape craft.
Design and fitting of a keel intergrated cooling system to the escape craft for safer and more economical operation.
Offshore training manager to train rig and platform personnel in the operation and handling of the upgraded equipment
Chief mechanic and Consultant for the construction of the offshore escape craft training and winch testing centre at Barry Beach offshore supply port facility. Set up training curriculum and train instructors in escape craft deployment and seamanship.
1992/1994: Chief Mechanic/Esso representative:
Construction, fit up and drilling of Whiting unmanned gas and oil platform.
McDermott barge 101 setting of jacket and fitting of production modules.
Maersk Giant Jack Up drilling of 8 oil and gas wells.
Construction and fit up of Whiting production facilities on Snapper platform, commissioning of Solar gas turbine oil pumps and gas compressors.
1991/1992: Chief Mechanic/Esso representative:
Drilling, workover of Snapper platforms 28 oil and gas wells.
Attwood Oceanics drilling and Imperial Snubbing workover.
1991: Chief Mechanic/Esso representative.
Maersk Giant workover and infill drilling 10 oil and gas wells Barracouta platform.
1990/1991: Chief Mechanic/Esso representative:
Drilling 2 sub sea oil wells Seahorse and Tarwine, Southern cross semi submersible. Set up subsea wellheads, umbilical and remote control facility onshore before deployment to Seahorse 18km and Tarwine 15km from Barracouta platform.
Construction fit up of subsea production facility on Barracouta platform.
1981/1990: Rig Mechanic/Maintenance supervisor.
Maintenance, repair and overhaul of the following equipment;
Reverse Osmosis desalination plants.
Caterpillar, EMD, Cummins, Duetz etc.
Multi fuel turbines.
Favco cranes to 120 ton.
National, Gardner Denver etc, pd pumps.
Air compressors.
Hydraulic pumps, motors, cylinders and rams.
Non destructive eltro magnetic testing of crown and block sheaves.
Oxy and arc welding.
Lathe and milling machine operation.
Alignment and commissioning.
Shutdown inspections.

CERTIFICATIONS & ACHIEVEMENTS
ST Johns ambulance first aid certificate 2
HUET training.
Offshore fire fighting.
Offshore survival training.
Man management.
Borg Warner Mechanical pump seals.
Gas compressor evaluation.

ADDITIONAL INFORMATION
I hold a current Australian Passport.
I am willing to travel and relocate.
I enjoy working with Nationals.
I am medically fit.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1151 to 1200 of 10816)

Go to Search Parameters...

Brief Description

Electrical Engineer

Twenty-Eight(28) years of progressive experience in Piping Design with function relevant to all aspects of Font End Engineering and Design, Plant Layouts, Piping Layouts, Isometrics, Material Take Off, Stress Analysis, Procurement and Preparation of Specifications, Plant Modifications, etc.

Experienced production supervisor

Observer / Senior Observer /Chief at Schlumberger -WesternGeco International Resources ( WGIR Libya 3 D Projects ) with Sercel 408 UL CMXL /428 Recording instruments and VE432/64 vibroseis electronics using source navigation

To apply my skills as I am very much fascinated by Power & Desalination Plant Process Quality Control & Environmental Laboratory chemist. I would strive to learn new developments in boiler water treatment & Environmental sciences so that I can carve a place for myself in this field.

Over 13 years piping stress and mechanical engineering experience with EPC companies in Sinopec, China, Fluor Canada and Jacobs Canada

Joined E & P Company in 1989 and have worked in both onshore and offshore at different positions. As co man supervise operations on Desert Rig deployed for drilling and work over wells. Prior to current assignment worked as co man on jackup rig. Ensure operations are carried out safely & efficiently

My various experience in the Safety field has included so far about three years in KCA DEUTAG Drilling GmbH Company drilling company as Rig-site HSE Advisor in Libya,four years position as HSE Coordinator at Drilling Waste Management Company(Tunisian company),Prior to that I was a Chief of District

Having substantial knowledge and experience (14 years) in Piping/Mechanical engineering, especially in the Piping Engineering and Design. Involved in industrial plant, petrochemical. Expert in PDMS, including Design, Draft, Isodraft and ability to design and drafting Pipe support using MDS

Senior Welding Inspector QA/QC

Total experience of 20 years of which 2 years in Overseas as a Process /DCS Plant Operator In various Gas, Refinery, Petrochemicals & Fertilizers Plants.

27 years experience as Drilling supervisor.

Under Ground Piping Specialist

Engaged for more than 14 yrs in extensive work in the field of piping, structural and welding inspection, supervision of piping, erection, material preparation and scheduling based on the given scope of work.

Accomplished petroleum exploration and production manager of people and projects. Proven broad-based experience in multi-disciplinary exploitation of petroleum reserves, evaluation work in acquisition and divestitures, information technology and project management.

Twenty-Four years experience in the administration of Oil & Gas property documentation inclusive with, land management, mineral leasing, landman duties encompassing lease conversions, reimbursements, compensations, and shut-in royalties. Serving as a generalist for my first ten years and as a speci

A Civil/Structural Engineer having 14+ years of Consultancy experience in Structural Design and Project Management for Process, Oil & Gas and Power & Energy Projects. I have good knowledge and experience of Canadian, British, Indian, American & various Process industry standards.

Control System engineer with more than 14 years of experience with Yokogawa Systems Engineering

20 Years plus: Industry sector, Expertise Platform construction, Fitter/Mechanic, Contract Supervisor, Offshore Heath & Safety, Supervisor/Trainer, Drilling Offshore, Rig Mechanic/Chief Mechanic, Drilling Onshore & Offshore.

40 Years Experience - Drilling Sector - Experienced Drilling Consultant / Superintendent, Work-Over/Completion

Electrical & Instrumentation Engineer experienced in Testing & Commissioning Instruments in FPSO, Installation of Electrical services in the Power plants (Gas turbine, Hydro, Steam turbine), Commercial Buildings, MRT and Commissioning of Process Control System in Water Treatment Plant.

APPLICATION FOR THE POST OF BLASTING AND PAINTING SUPERINTENDENT

I have different skills from farming to superivor to general labor skills inthe oil and gas industary.amd also I have some sales experance

Worked in Precommissioning,commissioning,start up of Refiner, Petrochemical, GasPlant,worked on DCS system and fields aswell,Fully ocnversant with HSE policies. Undergone training of Fire and Gas.

Lead Drilling Fluids Engineer / Mud Engineer / Drilling fluids specilalist/ Mud Manager/Drilling Supervisor/ Drilling Engineer

Drilling, Completion Wellsite consultant

I am Mech Engg post graduate(Prodn Engg). I have experience in using CAE packages Hypermesh,Ansa and Nastran and performing static ,Normal mode and fatigue analysis

28 years experience with industrial design drafting work. Assignments have involved equipment layouts, P&ID development, material take-offs, estimating, checking and field work in addition to developing construction drawings and fabrication isometrics.

Electrical Technician with 20 years experience in the oil and gas industry.

Executive Recruiter, Recruiter, Contract Recruiter

am right now working at OXY in Santa Cruz with WO & Completion jobs related.( as a work over site Manager) am interested in your global opportunities so Ihave attached my resume with actual phones and emails.I have experience managing different kind of peoples and oil specialties.

been welding for 25 plus years...

A total of 10+ years experience in Pipe Stress Engineering and Mechanical Stress Analysis in

Good knowledge in delivering commercial operational management including specialist area of hydrocarbon business and regulatory compliance and administration (Production Sharing Contract, Joint Operating Agreement and Gas Sales Purchase Agreement, fiscal terms)

QA Manager with 23+ years diverse experience

All STCW certificates are valid and available

Water-flooding, reserve estimation, production forecasting, economic & risk analyses, reservoir characterization, tracer & pressure transient analyses. Well surveillance for development opportunities. Some thermal experience. Simulation experience to predict performance & optimize development plans.

Having 20 years of professional experience in various aspects of Detailed Engineering, Pre-bid engineering and Construction supervision & commissioning activities related to Control & Instrumentation (C&I) System for Oil & gas, Refinery, LNG & Petrochemical and power plants.

Petroleum Engineer with 13 years experience in the Oil and Gas Industry with solid knowledge in Geopressure analysis, Well design, MWD operations and rock properties analysis; project management skill (estimating/cost, control/scheduling); bilingual Spanish-English; APEGGA EIT# 92804 and Worldwide.

To obtain a position as Suitable position in process control Instrumentation that allows me to expand my current skill set with technical challenges and career development opportunities to enhance the achievement of corporate goals.

Highly Qualified Draughtsman

Science bachelor degree & safety management diploma and HSE Supervisor Technician with 13 years of experience, Worked for drilling operation, Production operation on offshore and onshore as a HSE technician, advisor and supervisor. Drilling experience as well as driller hand ,Experience managing

A competent & self motivated professional with the ability to work independently and as part of a team within a highly pressured, fast moving environment with 10 years of qualitative and enriching experience in the field of Logistics, Supply Chain, Freight Forwarding, & Operations

An astute, detail-oriented professional who excels under the pressure of time constraints and possesses the determination to always exceed expectations.   Summary of selected Accomplishments responsible for career total of more than 500 placements!

Rock physics, Petrophysics, Quantitative seismic Interpretation, AVO, reservoir modeling, generation of synthetic seismograms

Total Of 16 Years Experience In Drafting And Detailing Of Piping Drawings And Other Drawings In Compliance With The International Standards. Experience Achieved Is In Line Of The Chemical / Petrochemical / Refinery And Connected Utilities Piping Jobs.

Seeking employment as Telecom Engineer in a competitive environment for a position offering challenge, diversity and opportunity for professional advancement, having strong learning aptitude along with analytical and interpersonal skills.

OBJECTIVE: To obtain contract or full time position as a Document Control or Records Administrator and/or other related job.

PDMS mid-level piping designer with a specialty in PDMS DRAFT, Misc. pipe supports, equipment modeling and sloped pipe.

Production/drilling engineer hold Master from IFP; working in Workover operation

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [ 24 ] 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out