Resume - Education : Diploma in Mechanical Engineering.I am having 19 years experience (1...

Misco Jobs

Resume #81872

CONTACT INFORMATION:
View contact information...

POST APPLIED: SITE ENGINEER / SUPERVISOR (PIPING)

DATE OF BIRTH: 26 - 07 -1968

NATIONALITY: INDIAN

MARITAL STATUS: MARRIED

TOTAL YEARS OF EXPERIENCE: 19 YEARS

ACADEMICS:

a) First class Diploma in Mechanical Engineering – September 1987.

b) AWS –CWI WELDING INSPECTOR - 2004

DRIVING LICENSE: Holding valid Kuwait, Oman & Indian driving License

COMPUTER SKILLS: Literate in MS office.

LANGUAGES KNOWN: ENGLISH, HINDI, TELUGU, ARABIC (LITTLE)

TECHNICAL SKILLS & CAPABILITIES:

Very well acquainted with piping works in Oil & Gas, Refinery, crude oil gathering stations, Gas recovery flash gas compressor, Heavy industry & Gas utilization projects. Good Knowledge of various Equipments used in Refinery, Oil & Gas Industries. Hands on experience in field management of construction works, have strong experience in all phases of Project execution cycle and day-to-day maintenance jobs and piping works in refinery & crude oil gathering station projects. I had worked in piping works from mobilization to pre-commissioning, commissioning and final hand over of projects. Having substantial construction & day-to-day maintenance experience in high value capital projects in Oil & Gas projects and running refinery in Oman, Syria, Dubai, Qatar, Kuwait, Saudi Arabia and India.

WORK EXPERIENCE: GULF: 11 YEARS

INDIA: 8 YEARS

1) CONSOLIDATED CONTRACTORS COMPANY W.L.L – SAUDI ARABIA.
[FROM 25/01/2008 TO 07/11/08]

Worked as a SUPERVISOR [PIPING] FOR SAUDI ARAMCO – KHURSANIYAH GAS PLANT PROJECT (BECHTEL –TECHNIP JOINT VENTURE).

RESPONSIBILITIES:
I was responsible for Site Erection and Fit-up of Stainless Steel, Carbon Steel, and Alloy Steel piping works (1/2" to 68" lines). Controlling piping activities involved in Acid Hydrocarbon, Diglycol Amine (DGA), Fuel Gas, Feed Gas, Relief Lines, Oil Product, Steam, High Pressure Steam, Steam Condensate, Boiler Feed Water, Boiler Blow-down, and Utility Pipelines connected from Piperacks to Equipments/Vessels such as Steam Flash Drum, DGA Contactor, DGA Regenerator, Carbon Filters, Heat Exchangers, Fin-fan Coolers, Feed Gas Knock-out Drums, Hydro Carbon Flash Drums, Pumps, Reboilers, Reflux Drums, and Reclaimers for Low Pressure (LP) DGA Train-1, Train-2 and High Pressure (HP) DGA Train-1 as per ARAMCO Standards.
Also having a day-to-day follow-up with clients SAUDI ARAMCO & BTJV for piping progress, open front, material and engineering issues.

2) KUWAIT NATIONAL PETROLEUM COMPANY THROUGH KHARAFI NATIONAL, KUWAIT. [From 25/12/2004 to 30/12/2007]

I had worked as a SUPERVISOR (FABRICATION & WELDING) in Kuwait National Petroleum Company (K.N.P.C.) at Mina Abdullah Refinery (MAB).

Responsibilities:

Fabrication, welding & erection of Above/Under ground crude oil, naphtha, hydrogen, sulphur, diesel, kerosene, fuel gas, sea water, utility water & steam piping which includes Carbon steel, Alloy steel, Stainless steel & Copper Nickel conforming to ASME B31.1/31.3 and also KNPC engineering standard.
Executed project jobs during Major-Turn-Around in the refinery.
Fabrication & welding jobs on static equipments like Reactor, Reformer, Heater, Heat Exchangers, Vessels, and Boilers & Storage Tanks. Done partial & full replacement work on the above static equipments, piping & Heat exchanger re tubing and seal welding. I had carried out hot works during preventive, breakdown & shutdown maintenance.
Welding of Leak box / patch on live lines of hydrocarbon, gas, steam & water.
Also executed HOT Tapping jobs on live lines of Hydrocarbon.

3) M/s GALFAR ENGINEERING & CONTRACTING LLC.SULTANATE OF OMAN.
[From 30/06/2003 to 25/07/2004]

Worked as WORKS COORDINATOR (MECHANICAL) and was responsible for fabrication, erection, testing, and commissioning of oil & gas piping, F.B.E coated piping works for crude oil manifolds and water injection manifold jobs at Petroleum Development Oman (P.D.O) Projects at Musallim / Ghaba Gathering station sites.
Fabrication and Erection of gas recovery flash gas compressor piping works, and Duplex stainless steel (D.S.S) piping works for P.D.O (petroleum Development Oman) L.N.G. plant at Saihrawl project.

4) M/s. ASIAN BOILER ENGINEERS PVT.LTD, MUMBAI, INDIA.
[From 2/11/1998 to 4/11/2001 and 20/5/2002 to 30/05/2003]

Worked as a MECHANICAL ENGINEER and was responsible for workshop fabrication works which involves fabrication of Process piping, Oil pipe lines, Boiler piping works and Supervising at site for erection of piping works and attending maintenance jobs.

5) M/s GULF HOUSE OF TRADE & CONTRACTING. CO. W.L.L, DOHA, QATAR
[From 10/11/2001 to 8/5/2002]

Worked as a PIPING SUPERVISOR and was executed piping works at Qatar General Petroleum Company (QGPC) for crude oil manifolds, fuel gas, steam & utility water lines at Dukhan & Diyab crude Gathering stations.
Heat exchangers maintenance works and S.S piping works for Qatar Fertilizer Company (QAFCO), and Burner tubes / piping works for ABB- Alstom Power plant for Qatar Electricity and Water Supply Company (QEWC) at Ras Abu Fontas site.

6) M/s. SIAMCO ENGINEERING CO.LLC, DUBAI, U.A.E.
[From 3/12/1995 to 9/8/1998]

Worked as a MECHANICAL ENGINEER and was responsible for fabrication and erection of Mechanical Equipments, Storage tanks, Piping system, Structural steel fabrication, Construction of petrol and gas filling stations, Mechanical Maintenance works, Marine fabrication works in workshop and on ships.

7) M/s. PETROFAC INTERNATIONAL LTD., TEXAS, U.S.A., SHARJHA BRANCH, U.A.E.
[From 2/2/1995 to 8/10/1995]

Worked as a PIPING SUPERVISOR at SYRIA for Omar gas utilization phase-III project for Al -Furat Petroleum company (SYRIA).

I was mainly responsible for fabrication, erection and testing of various process-piping works involving in the gas compressors, propane storage vessels, propane chillers, Boilers and pipe racks for their gas plant and gathering stations.

I was also involved Mechanical maintenance works during commissioning activities and reliability run of the project.

7) M/s. PETROFAC INTERNATIONAL LTD., M/s GALFAR ENGINEERING & CONTRACTING LLC.SULTANATE OF OMAN.
[From 13/6/1993 to 25/1/1995]

Worked as a PIPING SUPERVISOR in Petrofac International Ltd., (U.S.A) / Galfar Engineering & Contracting Co. LLC. (SULTANATE OF OMAN), joint venture project for north Oman crude stabilization (NOCS) project for petroleum development Oman (PDO).
I was mainly responsible for fabrication, erection and testing of various piping systems involving the Inlet Manifolds, Vacuum Separators, Liquid ring Vacuum compressors, Crude oil Booster pumps, Instrument Air Compressor, Main gas compressor, Condensate stabilizer, Hot water heaters, pipe racks, Knock out drum, Air coolers and Flare stack.

I was also involved in the Mechanical Maintenance works during commissioning activities and reliability run of the project.

8) M/s ASIAN BOILER ENGINEERS, BOMBAY, INDIA
[From 15/8/1992 to 29/5/1993]

Worked as an ENGINEER (FABRICATION) and was responsible for fabrication, erection, and testing of Steam pipe lines, Oil pipe lines as per IBR, ASME, API, ANSI and British Standards.

9) M/s. BHARAT HEAVY PLATE & VESSELS LTD., VISAKHA PATNAM, INDIA.
[From 1/5/1988 to 31/7/1992]

Worked as a JUNIOR ENGINEER and was responsible for fabrication, erection & testing of C.S and S.S pipe lines of Air, Oxygen, Nitrogen, Argon and Pump House piping for Air separation Units (550 TPD Oxygen plants) for Visakhapatnam steel plant and Rourkela steel plant projects.

10) M/s. TECHNO WELD INDUSTRIES.VISAKHA PATNAM, INDIA.
[From 15/11/1987 to 15/4/1988]

Worked as a MECHANICAL SUPERVISOR and was responsible for fabrication works relating to stainless steel pressure vessels, Heat Exchangers and C.S & S.S pipe lines.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5051 to 5100 of 10813)

Go to Search Parameters...

Brief Description

10 Years of Working Experience as Planning/Scheduling Engineer, Cost Control Engineer and Quantity Surveyor to Several Projects in Saudi Arabia, Algeria, Singapore & Japan. Expert Level in Primavera & Microsoft Office, MS Project & ACCESS.

1) CAN MANAGE MEDICAL AND SURGICAL EMERGENCIES,ESP. ACCIDENTS& TRAUMA 2) CAN MANAGE FRACTURES AND DISLOCATIONS 3) CAN PERFORM MINOR/MEDIUM SURGERIES

Field of expertise includes the following: AutoCAD releases 10 to 14, 2000 and 2002. Familiar with AutoCAD, Microstation & Microsoft (office) software

Education: HNC in ships engineering. Work experience: 12 years as ships engineer on tankers, 1,5 years ass. maintenance manager of a liquid bulk terminal in Thailand with products such as styrene monomer and ethylene and 7 years as maintenance manager in this liquid bulk terminal.

• Quantitative earth scientist • Strong analytical skills • Advanced technical and computer skills • Excellent multi-lingual communication skills • Significant international experience

Experienced Logistics/Procurement Manager

Strong verbal and written communications skills, highly organized, proven ability to plan, detail oriented, self-motivated, dependable, ability to interact well with customers, employees, at all levels of management. Willing and available to travel (Domestic and International)

18 yrs of EXPERIENCE in O&M FIELD AND CONSTRUTION.WORKED IN WORLDS LARGEST REFINERY PROJECT AT JAMNAGAR,ANDIN POWER PLANT,AND PRESENTLY IN INFOCOMM PROJECT.THROUGH KNOWLEDGE ABOUT POWER GENERATION AND DISTRIBUTION SYSTEMS, AUTOMATION, CONTROL ENGINEERING, MOTORS, PUMPS.

Over 18 years experience in oil and gas industry working in offshore/ onshore fields and base offices at various levels in well services mainly in completions including subsea completions and also in wireline, well testing, well stimulations & workover operations.

This is my resume which is appropriately suited for all engineering and operations jobs.

I have 12 years experience in the Oil & Gas industry on the IT & Telecommunications area. My last work experience was with CMS Energy Oil & Gas as the IT & Telecommunications Manager for West Africa family based in Equatorial Guinea.

Education : Diploma in Mechanical Engineering.I am having 19 years experience (11 years in Gulf + 8 years in India) in the field of piping works in Oil & Gas, Refinery, crude oil gathering station, Gas recovery flash gas compressor, Heavy industry, Gas utilization.

Career petroleum E&P, Refining, Laboratory, Technical, Management, Administrative, Patents, Contracts, Sour Gas, Start-ups, Debottlenecking

5yr experience in Piping Design (PDS), Layout Planning, Project Planning & Management, Erection supervision & support.

I have experience in drilling, formation evaluation and geosteering

Servicing/Maintenance of Pumps, Valves and some machines used in flow stations.

Piping Design Engineer With One Year Experience In Preparation of Plot plan & Key plan,General Arrangement Drawings,Nozzle Orientation for Process Equipment,Isometric Drawings with Bill of Material,Equipment & Piping Layouts.

Have passion and experience working in oil and gas industry mainly in mantainence services.

I am a person of cheerful disposition,taking instructed tasks reasonable easy all the times but affable with a will to succeed in

Intersted in refinery, explorationtion & process operations

API-510 inspector and level II NDE RT,UT,MT,PT,VT. College educated with turnaround inspection experience in refineries. Chemical plant, pipeline construction, power plants, and aerospace experience.

Industrial instrumentation and control

efficient deck maintenance,steering a ship,maintaining watch duties,good communication skills and qualification 10+2(physics,chemistry,maths,computer science)

B.COM , ASNT LEVEL II NDT INSPECTOR

Electrical Designer 12-1/2 Years of Exper. Layouts Cable trays/trench, Grounding, Power, Lightings, Tele Communication, Fire & Gas detectors, Multi Cable Transit (MCT) & related supports details. Single Line & Interconnection wiring block diagrams. Power / Instruments, Fire & Gas Cable Schedule etc.

My curriculum vitae includes detailed personal information as well as skills and qualifications, trainings and seminars.

I/E Designer, 28 years experience in the petrochemical industry along the Gulf Coast and in the oil industry in Alaska. Worked onsite at client facilities and in-house. Extensive use of Autocad and MS Office. Experienced in working with other disciplines, clients, vendors & construction. Will travel

Power sector professional with over 20 years of experience in O&M of thermal power plants

B.E.Electronics and Instrumentation

Skilled geologist looking for an opertunity.

Self-confident, hardworking and familiriaty in team-work

A very skilled Geomodeler competent in the use of Schlumberger PETREL 2008 for Static Reservoir modeling and Hydrocarbon Volume Calculation with a solid background in Reservoir Engineering and the applications of PERFORM in Well Design and modeling, also with Quality HSE Training from Shell(SPDC)

Subsea Pipeline Design Engineer

Pipe Stress Engineer

2 years Experienced Offshore Field Engineer working in platform construction

B.E.Mechanical Engineering....skill known Auto cad Pro-E,Ansys,Plant Design System ,piping design,hass

DIPLOMA IN MECHANICAL ENGINEERING, AUTOCAD 2008, CADWOX PROFESSIONAL 2008,PVLITE 2005

ArcGIS, Oasis Montaj, Uxolab, AutoCAD, MathCAD

I have 3-D drafting skills in Auto Cad Inventor AutoCad 3-D wire Frame I also Have experince in creating electrical schematics for offshore equipment.

15 years of experience in plants operation as panel operator, plant operator, team leader, shipment coordinator and superintendent in venezuela in companies such as PDVSA and ExxonMobil in units such as naphtha hydroteater, hydrogen, amine, sour water, sulfur recovery and tanks movements

PROJECT/DESIGN ENGINEER FOR FIRE PROTECTION SYSTEM

Proven oil and gas manager

Production operator,wireline operator and mechanic.

Experienced Exploration Geologist with over fours years’ field experience.

Electrical techinician work on FPSO/Rig and power plant

Mechanical Engineer, with 11yrs exp, Specialized as Coating/painting engineer implementation of different types of coating techniques, practices, Corrosion control Operations, scheduling and monitoring. Been a Coating Inspector & QC Inspector & NACE Corrosion Inspector - Level 1

Construction of Transformer building Construction of Utility Building Construction of electroplating building. Construction of RCC Over Head water Tank Construction of Offices Buildings

B-tech Hons Mechanical

My Name is Asif Naeem &My Edgucation in Diploma of Mechanical Engeering&My exprience in Mechanical Techniction&Fabrication

landman

First Prev 101 [ 102 ] 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out