Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #81992 next resume »»
CONTACT INFORMATION:
If you don"t see contact information, please log in first.

Summary
Twenty two years of mining and construction experience in both surface and underground. Partner in Drilling & Blasting company that services the Mining, Construction and Rail Industries. I have served as Chief Inspector for Construction Management on The Heartland Corridor Project in West Virginia. Four as Chief Inspector for the city of Atlanta on the West Area CSO. Eighteen years in supervisory positions. Fifteen years drilling, blasting and training. Bituminous Coal Operators of America (BCOA) Supervisory Training Certified. Surface and Underground MSHA and OSHA Trainer. International Society of Explosive Engineers (ISEE) Member and level 2 Blaster.

Areas of Expertise Drill & Blast Quarry and Construction
Drill & Blast Shaft, Slope and Tunnel Development
Gassy Mine Foreman, Examiner and Blaster
Shaft, Slope and Tunnel Initial support and permanent lining.
Shaft and Tunnel Grout for water control and structural integrity
High and Low pressure Chemical and Cementatious grout
Smooth wall Blasting Techniques
Shotcrete.
Experience 2008-Present MANA Drill & Blast, LLC Atlanta, GA
President of Special Projects Mullan Tunnel Blossburg MT
Develop and Implement means and methods for efficient drilling in active railroad tunnels with minimal disruption. Estimate, Schedule and Drill core holes for tunnel lining modification exploration. For Montana Rail Link.
2008-2008 Jacobs Associates San Francisco, CA
Chief Inspector Heartland Corridor Roderfield WV
Construction management inspection to insure quality control and contract specification requirements on a major Railway Tunnel retro-fit project in a Union Environment for Norfolk Southern. Duties include, but not limited to Consulting with design and CM team issues with possible methane gas in tunnel areas due to coal seams in overburden. Collecting progress statistics, updating and monitoring daily reports and logs on progress. Monitoring ongoing contract progress.

2004–2007 Delon Hampton & Associates Atlanta, GA
Chief Tunneling Inspector West Area CSO Atlanta Ga
Construction Management Chief Inspector for Drill and Blast Shafts and tunnels on a $250 million CSO project in Atlanta., Oversee and Direct 10 inspectors on 7 sites, 4 Construction Shafts 40' diameter 100' to 175' deep, 1 intake shaft 20' diameter 100' deep, 1 overflow shaft 20' diameter 100' deep and 1 Pump station shaft 75' diameter 125' deep including initial support, permanent lining and contact grouting. Several thousand feet of Drill and Blast Starter and tail tunnels, Overflow and connector tunnels Excavation, Lining and Grouting were monitored also to insure contract compliance through monitoring daily shift reports Compile records for weekly progress reports. Assure compliance of blasting requirements for city, state and federal regulations. Serve in unofficial Public Relations Liaison position for city of Atlanta to communities during blasting operations. Compile and maintain blast data. Assist resident engineer with daily and weekly progress reports.

1996–2004 Dynatec Mining Contractors Various Loc.
Mine Foreman / Blaster, Barrick Goldstrike Meikle Mine Elko NV
Drill, Blast, Excavate and Line a 1400' x 21' diameter shaft for gold mine production. Including permanent lining and steel installation for 4 compartments. Deepen the same shaft to 1750' while in production 2 years later. Line Install steel and commission shaft. Drive 3600' of Decline 30'x36' for haulage, develop an underground shop and office area 60'x1200'x40' including bridge crane and fire door installation and commissioning, excavate and line ore passes and storage bins across several mine levels, Excavate and develop Crusher station 80'x200'x80' including setup and commissioning of 200 TPH crusher. Shotcrete line all these areas 8000+ yards. Process time and material estimates for construction bids. Directed daily safety meetings.
Mine Foreman / Blaster, Barrick Goldstrike Rodeo Mine Elko NV
Drill, Blast, Excavate and Line a 1300' x 12' diameter shaft for aggregate storage. Included hoist and headframe setup. Mine Foreman/Blaster Gassy Mine, FMC Corp Little America WY
Drill, Blast, Excavate and Line an 800' deep 20' diameter ventilation shaft for a Trona mine.
Leadman/Driller CargillSalt Cleveland OH
Control water inflow in Production and service shafts of a Salt mine by drilling and injecting High pressure Chemical grout. Changed out hoist ropes on both production skips. Inspected and replaced guides and steel in both shafts.

1995–1996 Anglo Gold Elko, NV
Drill and Blast Specialist Foreman Murray Mine Elko NV
Train and Supervise drill and blast crews in an underground gold mine. Drill and blast bench and face rounds. Operate Atlas Copco and Tamrock jumbos, Tamrock Solo and Ingersoll Rand air track drills. Wagner 3.5 and 6 yard Muckers. Wagner and Dux Haul trucks.Power trucks and Scissor Lifts, Motor Graders, Boom truckand Backhoes.

1991–1995 Tower Rock Stone Ste. Gen MO MO
Surface Driller Ste Genevieve and Scott City Mo
Drill and blast rock in both production and stripping areas in a surface rock quarry. Operated Drilltech, Gardner Denver, Tamrock and Ingersoll Rand Air/Hydraulic and ITH Drills up to 6 ¾". Cat and Dresser Loaders up to 993c. Cat and Terex haul trucks up to 777. Skidsteer Loaders.

1989–1991 Cominco American Bixby, MO
Underground Equipment Operator
Build and maintain roadways in an underground Lead mine. Operated Cat and Komatsu Loaders up to 980. Cat and Galion Road Graders. Cat Articulating Haul Trucks. Various Drills and High explosives.

1987-1989 Mid-Continent Resources Carbondale, CO
Underground Lead Miner
Started out as the Safety/First Responder. Moved into coal mining and Lead Man position quickly. Mine caught fire and closed down.

Education/Certifications
MSHA Surface and Underground Trainer
OSHA Construction and General Industry Trainer
ISEE Level I & II Blaster
Shot Firer Certification Colorado, Wyoming & Illinois
Mine Foreman Certification Wyoming & Illinois
Mine Examiner Wyoming & Illinois
BCOA Supervisor Trained
FRA Inspector Qualified
Seminar Boot Camp: Public Speaking Course

Affiliations Member ISEE, Cobb County Chamber of Commerce, St.Louis Chamber of Commerce
Veteran of the United States Air Force.
Assistant Blaster for pyrotechnics show: Cape Girardeau, MO. Air Show
Additions

References: I have begun to consult companies on Drilling, Blasting and Safety training and techniques for both surface and underground mining in all rock types, as well as our Drill & Blasting Business. I bring over twenty years of mining and knowledge to the table that will be effective in any position.
«« previous resume next resume »»
Search Results (Resumes 1 to 50 of 10884)Go to Search Parameters...
Brief Description
Free! Pipeline Construction and Installation
Free! I am working as Toolpusher since 1999 then as SNR Toolpusher.I have experience in Land rigs,different types,Land skidding rigs type,Good HSE Attitude, To manage the personnel of different nationality.
Free! I have been a well site supervisor for the past 7 years for top companies in Canada / Duvernay Oil Corp / Shell International ( canada ). I have been working hard for the past 19 years to excel in the completion / workover / production, sector of the oil and gas industry.
Free! Geophysicist
Free! Dynamic business development and operations executive with 25+ years of experience and a history of delivering multimillion dollar P&L improvements by identifying and capitalizing on opportunities to win new business, reduce costs, and enhance processes / productivity. Strategic thinker.
Free! I am reliable, highly motivated leader, with over 17yrs experience in the drilling industry
Free! Knowledge and specialty in Versaclean Synthetic Oil Based Systems, Novaplus systems, Lignite/Lignosulfonate, KCL Polymer, Rheliant and Flo-Pro systems. Experience in exploration wells, directional, deviated, lateral as well as development wells. Experience with blowouts,and well control,
Free! Completion Supervisor for vertical and horizontal wells with 14 years experience
Free! Geologist (Ph. D.), 10 years industry experience in exploration, mining and JORC-like reserve/resource estimation projects in Europe, Middle East and East Africa is interested to support and strengthen a new international team. Surpac experienced, hands on approach, bulk commodity experience.
Free! Twenty two years of mining and construction experience in both surface and underground. Mine Foreman and Blaster Gassy mines. Surface and underground blaster experience. Coal and Hardrock experience.
Free! Electrical Supervisor/Technician. Construction and Commissioning, Explosion Protection Certification
Free! Experienced hard working Geologist, Underground and open pit experience, Resource development modelling and drill program design and implementation, Very experienced mapping and strong structural background.
I am an M.Sc Ph.D and had 26 years experience as Mud Cosnultant/Supervisor. Worked worldwide with amjor mud services providers. Presently available to work immediately any where in the world. Preferrably on rotational basis, however, not regid to stay at work place. looking for some senior position
Specialist in geophysical projects management, data acquisition /processing, AVO studies (processing / seismic attributes and tomographic inversions) / mapping and interpretation; multilingual practitioner and self-starter with diverse professional experience/ skills
I am having 24 years rich experience in Water Treatment that includes pretreatment, water filtration, demineralization plant, water softening plant, micro-filtration, nano-filtration, reverse osmosis and power plant water treatment that include O&M of condensate polishing units.
Experienced Ph.D Reservoir Compositional Simulation Engineer
CHIEF EXECUTIVE OFFICER / CHIEF OPERATING OFFICER / CHIEF FINANCIAL OFFICER
Project leadership, project development, engineering, installation, field startup and operations. Project engineering, instrumentation and controls, distributed control systems (DCS), safety systems (SIS),programmable controllers (PLC) Human machine interfaces (HMI). System interfaces. DCS,PLC
27-year career with Chevron, I was employed both as organic geochemist and petrophysicist. Experienced in openhole log analysis, integrating log and core data. Worked with all three major logging contractors. Experienced in LWD and wireline logs. Familiar with workstation and geolog.
I Obtained a PhD, MSc and BSc all in petroleum engineering, and a wide experience (hands-on, supervision and Lab work) in drilling and drilling fluids engineering for over twenty three years. I believe in undertaking challenging for improving innovative enhancement in drilling and completion fluids.
30 plus years of international petroleum exploration in prospect generation/evaulation and in basin analysis using sieismic, geological and sequence stratigraphic tools.
C Level Oil & Gas Exploration and Production Leader
cfd, thermal, aircraft, turbomachinery
I have experience in oil & gas industry for more than 22 years, 5 years in power equipment fabrication and manufacturing and 2 years in mining industry. Area of my expertise are QA/QC, Welding and NDT, Construction and Fabrication and Project Management. Familiar with International Code & Standard .
E&P Geophysicist & Integrated Geoscientist (at Advisor/Senior Staff or Practice Manager level) immediately contributing Prospect Generation, Reservoir Seismo-Geology/ Seismo-Petrophysics, 3D Reservoir Modeling & Seismic/Sequence Stratigraphy enhanced with IT Applications; Strategy Mgmt, Risk Mgmt.
A mechanical engineer with 35 years experience in the design, troubleshooting, installation, operation, and control of rotating equipment including compressors, gas turbines, steam turbines and pumps. Primary experience has been in improving the performance of gas compressors and related systems for
A senior engineering position in areas such as Mechanical Engineering, Petroleum Engineering, Artificial Lift, Multiphase boosting & Separation, Petroleum Production Technology, Petroleum Facilities Development, Planning & Design, Pipelines Inspection & Engineering, Inspection Engineering or Corrosi
I am 56 years old Turkish citizen and looking for a serious and full time job abroad. I am an AIChE member and have PhD. , M.S. degrees related with heat transfer in chemical engineering and I also have more than 30 years of experienc
30 years international executive leadership of HSEQ, integrated risk and life-cycle management gained in engineering, fabrication, construction, commissioning, operation, maintenance and decommissioning projects.
23-year profession experiences in oil and gas upstream activities with Texas Geophysicist Licenses
Qualifications: CPL/JD Skills: Due Diligence, Title Runsheets, Lease Take Off's, Ownership Rpts. and Lease Acquisitions.
Structural and stratigraphic interpretation of 2D and 3D seismic data
As a Principal Process Engineer supervised and executed over 20 basic engineering designs (grassroots and revamps) of ethylbenzene, and styrene monomer units. Participated in 6 startups, 5 of which overseas. Also supervised or participated in numerous technical proposals and feasibility studies.
Landman, Lawyer, Title Abstractoe, Business manager
front-end engineering design (FEED), engineering, procurement & construction and test & commissioning of wireless network planning & design, backhaul microwave, satellite network and fiber optic transmission systems. Proven ability to design and implement large-scale wireless network and fiber optic
23 years experience including IT management, systems architecture and design, analysis, modelling and development, training as well as IS/IT strategies and frameworks for management information systems.
Twenty years experience in Mechanical Engineering/Design with the last ten years of continuous experience in pipe stress analysis. Pipe stress analysis, pipe supports selection&design, pressure vessel stress analysis & mechanical design, process equipment technical expertise.
Process Instrumentation & Control, Project Engineering, SCADA, PCS, ESD, F&G Systems & SIL Analysis, Control System Protocols & Network Security, Control Valves & Flow Measurements, Gas/Petrochemical & Petroleum Plant Design & Refining Operations, Wireless Networks (IEEE 802.15.4, ISA 100.11a)
HSE, Logistics, Fire protection, Contractors administration, site Supervision.
with practical experience in HRM and Marketing & B.D. fields enhanced by theoretical MBA background. Well acquainted with HRM, organizational and marketing practices gathered within my career path. I also have an aptitude for learning and high level of adaptability
Process Flow Assurance Engineer
Mud Engineer in Shallow and Deep Wells as Spud Mud, Polymers, Lignite and Lignosulphonate, PAC, Lime Mud, C.M.C mud, Filtrate Loss Control, Glycerin mud, Inverse mud, GOE, Inverted mud, applied in onshore/ offshore operations, HPHT well.
MS Geology; structural geology, prospect generation, basin analysis, petroleum systems, clastics, log analysis, field studies, Petrel, training, managment, recruiting
I have a lot of experience in drilling and drilling fluids.Desired position is Fluids Engineer onshore or Company Man onshore.
Good team player and a strong believer in teamwork and performance; Good verbal & written communication skills and a continuous improvement focus; Good facilitation skills, networking with industry professionals and performing presentations at workshops and seminars; Good leadership and mentorin
20 yrs of international reservoir engineer experience in evaluation, design, simulation, management and implement of oil and gas exploration and development projects in both E&P Companies and consulting firms
Would you please see my CV and references attached?
an accomplished project manager, Chartered Engineer, with BSc, MSc, in mechanical engineering, holder of IMechE's Diploma in Engineering Management - (Project Management), extensive experience in design engineering, plant engineering, cost and scheduling, procurement, contract administration
21 yars in Oil and Gas Industry
Install, commissioning and Site Acceptance Test for Substation Control and Monitoring System (SICAM SAS): PROFIBUS FMS (fiber optic cables) protocol between Bay Control Units and Substation Controller
First   [ 1 ]   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com