Resume - Senior Lead Project Engineer with 7 years of Oil & Gas experience in areas of To...

Misco Jobs

Resume #82015

CONTACT INFORMATION:
View contact information...

PERSONAL INFORMATION

Date of Birth: 10-07-1980
Nationality: Indian
Years of Experience: 7 years
Languages Known: English, Hindi, Korean
Marital Status: Married

SUMMARY OF EXPERIENCE

Key Words: Project Engineer, Senior Lead Package Engineer ¡V Topside Modules, Corporate Senior Lead Engineer ¡V Technical Interface, Regulatory Compliance Engineer, DFO Coordinator

General:
* Act as a Project Engineer handling a mini project which is a subset of the whole project
* Vast experience of working as a Mechanical package engineer on various EPC projects like FPSO modification, Semi-submersible drilling rigs, TLP, Fixed Platform and LPG Carriers.
* Strong background in scope and change management.
* Good understanding of international rules and regulations.
* Excellent communication skills and internal as well as external interface management experience.
Project / Design Engineering:
* Progress monitoring of topside module EPC contractors and sub-contractors by means of regular meetings, monitoring of engineering / procurement / construction schedules
* Providing technical and management support, providing interfaces with subcontractor companies, client, class. Ensuring that project activities are properly coordinated to achieve the project quality and schedule targets.
* Providing interface between company and classification society by acting as Regulatory Compliance Engineer, Progress monitoring and coordination for the company, EPC contractor and vendor CRS closeouts. Progress monitoring and coordination for class survey punch closeouts, Responsible for coordinating activities to complete all the necessary certification activities to achieve sailaway.
* Review of vendor data, Conduct design reviews, 3-D model reviews for identifying installation and fabrication clashes, 3-D model review for operability and accessibility, material handling review.
* Topside Modules Handled ¡V Inlet Separation & Crude Stabilization Module, Produced Water Treatment & Injection Module, Flare Knockout Module, Gas Dehydration Module, TEG Regeneration Package
* Marine Equipment / Packages Handled ¡V Diesel Generator Engine, Azimuthing Thrusters, Centrifugal Pumps, Screw Pumps, Air Compressor, Air Dryer, Nitrogen Generator, Deluge Pumps, Sewage Treatment Plant, Fresh Water Generators, CO2 system, Inergen System, Diesel Centrifuge, ROV
* Good experience of HAZOP Participation, HAZOP Close out, WE Design Reviews as per NORSOK, Preparation of material handling reports.
* Excellent knowledge of preparing Responsibility Matrix for modularized work scope, Marine/Utility equipment data sheets, Utility system sizing calculations, Pump head verifications, Preservation Procedure.
Procurement:
* Ensuring the necessary interface with the procurement function for requisitioning, expediting activities
* Extensive knowledge in preparation of Purchase order specifications, preparation of Vendor bid evaluation, conduction of Technical clarification meetings, preparation of bid evaluation reports, Vendor selection, Vendor data review and approval, finding resolution of conflict with vendors.
Construction:
* Attend weekly construction progress meetings for topside modules. Regular site visits for construction monitoring, walkthroughs and punch listing. Onsite trouble shooting for issues related to installation clashes, wrong construction etc.
* Conduct tri-party walkthroughs involving engineering, operations and commissioning. Preparation of final punch list before module delivery to shipyard.
* Topside module inspection walkthrough along with module fabrication and module installation contractor to identify and resolve potential installation issues like. Attend module weighing and load out meetings. Coordination of module lifting and installation activities at shipyard from module contractor point of view.
* Follow-up of punch list by conducting daily meetings at shipyard. Conducting daily site construction meetings to monitor completion of carryover work and punch closeout, review of contractor's manpower plan, material availability, monitoring of ITR closeouts.

EMPLOYMENT HISTORY

* PROSAFE PRODUCTION PTE. LTD. (www.prosafe.com) Jan 2007 ¡V Till date
Prosafe is a major owner and operator of FPSOs and FSOs. They offer turn-key delivery of FPSOs and FSOs, including the in-house basic and detail engineering, project management, operations and maintenance.

* DAEWOO SHIPBUILDING & MARINE ENGINEERING CO. LTD. (www.dsme.co.kr) Feb 2003 ¡V Jan 2007
Daewoo Shipbuilding and Marine Engineering Co. Ltd. (DSME) South Korea is an EPC Company involved in detail engineering and construction of the offshore platforms, TLP, Semi-submersible drilling rigs, FPSOs, Commercial and Special Ships. DSME has successfully completed several projects of oil giants like Exxon-Mobil, BP and Chevron.

PROFESSIONAL EXPERIENCE

ƒæ PROSAFE PRODUCTION (Jan 2007 ¡V Till date)
a. ROLE:
* Corporate Lead Senior Engineer ¡V Technical Interface (Sept 2008 ¡V Till date)

RESPONSIBILITES:

* Responsible to lead Technical Interface team of ten engineers comprising of package engineers, project engineers, interface engineers and regulator compliance engineers.
* Responsible for manpower / resource planning, appraisal of the Technical Interface team.
* Achieve standardization of engineering documents, project execution and engineering practice across all the projects in Prosafe, feedback and implementation of Operation group's lessons learnt.

PROJECT: APACHE's Van Gogh FPSO Jan 2007 ¡V Till date
* Conversion of an Aframax tanker to an FPSO and operate in offshore Australia.
* Water depth ¡V 350 meters, Classification ¡V LRS
* FPSO will have processing facilities for 63000 barrels of Oil per day and 80 MMSCFD of gas.
b. ROLE:
* Project Engineer ¡V Topside Modules (Jan 2007 ¡V Till date)
* Involvement in following project stages ¡V Basic Engineering, Procurement, Detail Engineering, Construction

RESPONSIBILITES:

* Topside modules handled ¡V Produced water treatment and injection module, Inlet separation and stabilization module, Flare knock out module, Gas dehydration module, TEG regeneration package.
* Handled procurement activities like RFQ preparation, quotation review, vendor meetings and technical evaluation for marine/utility packages like Thruster, Deluge pump, Emergency generator, Centrifugal pumps, Air compressor, Air dryer, Nitrogen generator.
* Utility system sizing ¡V Sizing for air compressor, air dryer, nitrogen generator, cooling pumps, Calculation for deluge water demand for the topside process and utility facility
* Preparation of responsibility matrix to divide the scope and identify the interface between company, shipyard and module vendor
* Perform multidiscipline technical analysis and review of vendor data for package design, sizing calculations and also check tie-in points for Piping and Electrical discipline.
* Conduct layout reviews, monthly design reviews, 3-D model reviews, structural design reviews, E&I design review and material handling reviews for all the process modules.
* Deputed as the only company representative at process module engineering sub-contractor office to monitor and expedite the engineering work and to ensure timely delivery of engineering deliverables.
* Other responsibilities during this deputation included responding to technical queries, weekly reporting to the Engineering Manager, regular teleconferences with construction sub-contractors and main EPC contractor.
* Attend weekly construction progress meetings for topside modules. Regular site visits for construction monitoring, walkthroughs and punch listing. Onsite trouble shooting for issues related to installation clashes, wrong construction etc.
* Conduct tri-party walkthroughs involving engineering, operations and commissioning. Preparation of final punch list before module delivery to shipyard.
* Topside module inspection walkthrough along with module fabrication and module installation contractor to identify and resolve potential installation issues like. Attend module weighing and load out meetings. Coordination of module lifting and installation activities at shipyard from module contractor point of view.
* Follow-up of punch list by conducting daily meetings at shipyard. Conducting daily site construction meetings to monitor completion of carryover work and punch closeout, review of contractor's manpower plan, material availability, monitoring of ITR closeouts.

c. ROLE:
* Regulatory Compliance Engineer (December 2008 ¡V Till date)
* Involvement in following project stages ¡V Detail Engineering, Construction

RESPONSIBILITES:

* Providing interface between company and classification society by acting as Regulatory Compliance Engineer, Progress monitoring and coordination for the company, EPC contractor and vendor CRS closeouts.
* Progress monitoring and coordination for class survey punch closeouts
* Responsible for coordinating activities to complete all the necessary certification from classification society, flag stage authority to achieve sailaway.

d. ROLE:
* DFO Coordinator (August 2008 ¡V Till date)

RESPONSIBILITES:

* Responsible for coordinating activities for compilation of "Documents for Operations", This involved engineering documents, supplier documents, operation documents.
* Expediting vendors for submission of final documents, coordinate relevant activities and resolve issues to close the outstanding comments.
ƒæ DAEWOO SHIPBUILDING & MARINE ENGINEERING CO. LTD. (Feb 2003 ¡V Jan 2007)

PROJECT: ODFJELL GVA 7500 DP/MOORED RIG Dec 2005 ¡V Jan 2007

* Water depth ¡V 10,000 ft. Classification ¡V DNV
* Operation Area: North sea

ROLE:

* Marine/Utility Package Engineer
* Involvement in following project stages ¡V Basic Engineering, Procurement, Detail Engineering

RESPONSIBILITES:

* Preparation of PFDs for marine and utility system.
* Preparation of system sizing verification report for marine and utility system.
* Equipments handled as Package Engineer- Diesel engine generator set, Azimuthing thrusters, centrifugal and screw pumps, air compressors, Exhaust and thermal oil boilers, sewage treatment plant, Air dryer and Incinerator, CO2 system, Inergen system.
* Perform multidiscipline technical analysis and review of vendor data for package design, sizing calculations and also check tie-in points for Piping and Electrical discipline.
* Review of basic design stage GA and MA drawings according to rule requirements, DSME standard practice.
* Clarifications with DNV for application of rules. Technical clarification for building specifications with owner according to rules & regulations and design requirements.
* Lead discipline engineer for HAZOP and HAZID study.
* Lead DSME engineer for Working Environment study as required by NORSOK standards.
* Issue and close out of technical queries.

PROJECT: Frigstad's HF-D90 ¡V Semi submersible drilling rig Sept 2005 ¡V Dec2005

* Water depth ¡V 10,000 ft. Classification ¡V DNV
* Operation Area: Philippine (Also, West Africa, GOM, Brazil)

ROLE:

* Marine/Utility Package Engineer
* Involvement in following project stages ¡V Basic Engineering

RESPONSIBILITES:

* Preparation of PFDs for marine and utility system.
* Preparation of system sizing verification report for marine and utility system.
* Review of basic design stage GA drawings according to rule requirements, DSME standard practice.

K-LINE's LPG Carrier July 2005 ¡V Jan 2006

* Capacity ¡V 38,000 m3 Classification ¡V NK
* Cargo's to be handled ¡V Propane, Butane, Anhydrous Ammonia

ROLE:

* Marine / Utility Package Engineer
* Involvement in following project stages ¡V Basic Engineering, Procurement

RESPONSIBILITES:

* Preparation of Purchase order specifications of all the major machinery packages of engine room according to owner specifications, international rule and regulations (NK) and DSME's standard construction practices.
* Vendor meetings and technical evaluation of the vendor quotation according to basic design. Clarification of the specification deviations.

Exxon-Mobil's Sable Compression Platform ¡V Fixed platform May 2005 ¡V April 2006

* Gas Compression of 600 MMSCFD.
* The Compression platform will be bridge linked to the existing Thebaud process platform (and wellhead) complex. Water depth at Thebaud is 29m.

ROLE:

* Worked as a Facility engineer to support the mechanical team in the detail engineering, construction, installation and commissioning stage.
* The main role was to coordinate with several design discipline as well as owner to close out outstanding issues of mechanical discipline.
* Involvement in following project stages ¡V Detail Engineering and Construction

RESPONSIBILITIES:

* Preparation of test & commissioning procedures according to rules and regulations, DSME standards.
* Follow-up and closing out of HAZOP action items for vendor packages.
* Updating of Material handling study as per As-Built status.
* Closing out of FAT punch items, nonconformity reports, owner and class technical queries.
* Acted as a facilitator in various meeting with owner and vendors.

BAKRI's LPG Carrier Nov 2004 ¡V Feb 2006

* Capacity ¡V 35,000 m3, Classification ¡V DNV
* Cargo's to be handled ¡V Propane, Butane, Anhydrous Ammonia

ROLE:

* Marine / Utility Package Engineer
* Involvement in following project stages ¡V Basic Engineering, Procurement, Detail Engineering and Construction

RESPONSIBILITES:

* Packages handled - Air compressor, Centrifugal and screw pumps, Composite boiler, Fresh water generator unit, Fresh water supply unit, Bilge water separator, Incinerator, Sanitary discharge system and Auto filters.
* Review of vendor data for all the equipments included in cargo handling system like Inert gas generator, Reliquifaction plant, glycol system, cargo compressors, cargo heater & coolers etc. The main work scope was to review the V/D keeping in mind installation, operation and maintenance point of view. Multidiscipline coordination during detail design stage.
* Class & Owner's comment clarification and close out.
* Review of 3D modeling to monitor the interfaces and tie-in points.
* Review and approve construction and equipment installation drawings
* Site surveys and onsite trouble shooting to solve installation problems with multidiscipline coordination

Exxon-Mobil's Kizomba-B TLP ¡V Surface wellhead platform Feb 2003 to Dec 2004

* Classification ¡V DNV
* Production capacity 250 kbopd, Water depth ¡V 1010 meters
* Kizomba-B represents the second phase of twelve discovered reservoirs in Block 15 offshore Angola. SWHP is connected to FPSO vessel. The oil is produced by SWHP and processed on FPSO and is offloaded by offloading system.

ROLE:

* Package Engineer
* Involvement in following project stages ¡V Detail Engineering and Construction

RESPONSIBILITIES:

* Equipments handled - Air compressor, Diesel engine-generator set, Chemical Injection package, Air dryer, Skim pile, ROV, Diesel centrifuge, Fresh water generator unit, Sanitary & potable water supply unit, STP, Hypochlorite generator package etc.
* Perform multidiscipline technical analysis and review of vendor data for package design, sizing calculations and also check tie-in points for Piping and Electrical discipline.
* Multidiscipline interface coordination during detail design stage and coordination with production team during construction stage.
* Attend FAT, Check FAT reports and closing out vendor punch list
* Review PDMS modeling for installation clash check and piping tie-in point check. Review and approve equipment installation drawing. Solve installation problems with multidiscipline coordination.
* Preparation of preservation procedure for mechanical equipments according to vendor recommendation and yard standards.
* Commissioning follow up and support work. Preparation of RFI and ACI (Change work) for any additional work. Closing out engineering issues with owner, closing out design deficiency reports, closing out owner punch items. Prepare equipment Sea-fastening schemes for platform sail-away.
* Carry out design changes in vendor skid to close the owner comments. Interface engineering for Owner furnished equipment ¡V ROV.

PUBLICATIONS

* "Tidal effects influence design of water ¡V disposal piles" Kaushal Shah, Jae-Young Lee. Oil & Gas Journal / Week of Nov.14, 2005
* "Dynamics of Petro-Pile" Kaushal Shah, Jae-Young Lee. DSME Engineering Review 2005.No.1 Vol.60

AWARDS

* "Work Excellency" Award from DSME ¡VKorea for completing the engineering procurement activates on time to make sure that slots for long lead items (Main engines and Thrusters) are secured for ODFJELL Semi Submersible Drilling Rig, May, 2006
* "Work Excellency" Award from DSME ¡VKorea for external and internal interface management during detail design stage of Kizomba-B TLP, October, 2004

ACADAMIC QUALIFICATIONS

* M.Sc in Project Management from National University of Singapore (Part-time, 2007-2009)

* M.Tech in Process Engineering from Indian Institute of Technology ¡V Delhi, India with C.G.P.A of 9.3 and top position in the batch (2001-2003).

* B.E. in Chemical Engineering from Nirma Institute of Technology ¡V Ahmedabad, India with 77.7%. (1997-2001)

COMPUTER PROEFFICIENCY:

* Languages Known: C,C++, FORTRAN
* Packages Known: MS-Office, PDMS, FLUENT-6.0, GAMBIT-2.0, V.B-6.0, MATLAB, ORACLE-8.0, SAP
REFERENCES:

* Available on request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2251 to 2300 of 10816)

Go to Search Parameters...

Brief Description

Experienced Piping Design Engineer

System Analyst with 16 years experience. Skills - Visual BASIC, MS SQL, Oracle, OSA

Responsible for all accounting activities from trial balance to financial statement and balance sheets and financial report from time to time, supervision & control of financial, cost & management accounts of the company up to finalization

25 years of experience in the oil and gas industry working with various companies on varied projects from the office phase to final production and beyond.

Petroleum Engineer with working knowledge looks for a new job focused in steady-state and transient simulation, especially on flow assurance projects evolving subsea systems and deepwater operations.

More than nine (9) years of experience in the field of piping design engineering and construction of various oil & gas refineries and geothermal power plants. Has the ability to do piping layout and design which include pipe routing with proper flexibility, special pipe support detailing and isometr

12 years of experience in Instrumentation and Control at varying capacities and responsibilities. Proficient in process measurement and control systems of different makes and types in varying process plant including Gas and Oil Separation Plant, Power, Fertilizer, Chemical and Desalination Plants.

Procurement & Supply Chain Management

Has twenty one (21) years of experience in the Field of Engineering, Design and Construction. Experienced in Front End Eng’g, Preliminary Eng’g & Detail Eng’g / Design Phase Work-share Execution, and Construction / Final Design / Eng’g Support for Construction / As-built Phase & Quantity Surveying.

Operations Manager, Technical Advisor, trainer, Senior Supervisor

Well Experienced with Siemens, ABB, Holec, GE, Alsthom and Merlin gerin HT & LT

Worked on prestigious projects for multinational organizations like Saipem-Eni FPSO (Floating Production Storage and Offloading) Vitoria BRAZIL, TOTAL ELF PETROLEUM, IOOC-IRAN, HYUNDAI ENGINEERING CO., LTD, like LIBYAN Sirte Oil Company (SOC), Snamprogetti-Eni (Group), in QATAR PETROLEU

Piping Designer

Having 15 yrs of petrochemical,oil& Gas and LNG plant experiences.

20 + years of job experience majoring in the Telecommunications sector. Working and servicing for several major Oil & Gas companies and Commercial Telecommunications companies.

I have been doing Sandblasting/Painting for 18 yrs. Over the years I have become more and more skilled. I have used just about every industrial paint there is (for example) zinc, red oxides, high builds, 890, urithane, epoxies, and etc.... I have knowledge with airless

Senior registered Professional Engineer with over thirty years of experience in management, drilling and production engineering, planning and operations.

Having More than 5 Years of experience in Scaffolding Safety Supervisor in marine industries and 3 Year Senior Site Safety Supervisor. Developing Reporting System, Setting up of Performance Standards, Financial Analysis, Ratio Analysis, Performance Analysis, Monitoring, Policy formulations, etc.

WELL TESTING & WELL HEAD OPERATION , CONTROL ROOM , CENTRIFUGAL & RECIPROCATING COMPRESSOR AND PUMP OPERATION „« WATER INJECTION, CHEMICAL INJECTION & GAS INJECTION „« DAILY PRODUCTION CALCULATION & SHUTDOWN OPERATION „« UTI

ANST NDT LEVEL III (UT, RT, PT, VT, MT) , CSWIP 3.1 Welding, CSWIP BGAS Painting Inspector Gr. 2, 12 years exerience in Quality control for inservice inspection and project inspection Pressure Vessel, Piping, pipelines

intools (smartplant instrumentation, smartplant review), microstation, autocad. Field walkdown sketching of instrument locations and conduit routing.

Chemist with more than 6 years experience in field of Thermal & Power and Desalination plant

Working with Seaways International Group Holding Company Limited, Dubai as Crewing Manager since March 2004 till date.

B.E Chemical Engineer

10 years experience working in in-house seismic processing and Field QC processing around the world

B.Sc. Mechanical Engineer. Over ten years experience in maintaining, overhauling and technical support for rotating equipment used in the oil and gas industry. Experienced with budgets, scheduling, calculation and analysis of rotating equipment repair requirements.

Chemical Enginner with more than seven years experience in the process and manufacturing field. Also, I have experience in sales.

Senior Lead Project Engineer with 7 years of Oil & Gas experience in areas of Topside package / project engineer, Marine & Utility, Regulatory Compliance. Vast experience of working in different type of projct like FPSO modification, LPG Ships, Semi-submersible drilling rig, Fixed Platforms, TLP

Reservoir Engineer with more than 7 years of professional training and experience in areas such as sub-surface, Production, Surface and Facilities Engineering as well as conducted research, aplied the latest technology, and gained experience in some field operations.

Work experience within the Oil & Gas industry and Materials Control for 10 years

I am Pugazhenthi. S, did my electrical and electronics engineering in 1999. I am working as Project E&I Manager in Sudan for the Project of CPF and well head development at Rotary Mec Sudan Branch. I am having 10 yrs experience in Project Management, Project Planning, Site supervision, Testing, Comm

SIVAKUMAR - QC Welding Inspector

Senior Drilling Engineer with more than 10 years experiences in Drilling, Measurement and Logging While Drilling. Outstanding background in field operations especially in drilling related job. International work experiences as Drilling Engineer, Directional Drilling Engineer, Rotary Steerable System

I am a chartered Engineer with ten years experience in the area of Instrumentation & Control. I have a 2(H)1 degree in instrumentation & Control from the University of Teesside, Middlesbrough, U.K. My experience spans trades, E+I design, senior/lead office roles in a global consultancy, site commiss

Use my skills and experience for your mission critical UNIX Infrastructure

Instrument Technician with over 25 years experience in Project Engineering, Field Instrumentation, Inspection, PLC’s, and DCS’s. Experienced in a broad field of Hazardous and Volatile plants such as Hydrogen plants, LPG, Methyl Methacrolate and Resin plants as well as offshore platforms on the Natio

I am having experience in Both static & rotating equipments

BE Chemical

I completed B.S. Chemical Engineering and I have 19 years working experience in Refineries and Gas plants in which 9 years worked as a Shift Supervisor. At present I am working with multinational workforce in Adnoc, Ruwais Refinery, Abu Dhabi, UAE.

Electrical technician:Plus 28 years of experience at drilling rigs. Electric & electronic maintenance at many kind of land rigs,with "IPS", "Ross Hill"& "GE" SCR's Drive systems,Varco TDS4 & TDS11SA top-drive, Kato generators,GE,Toshiba,Reliance DC motors,etc.English,Spanish Italian and Portuguese l

Basic and detail design of electrical power generation, distribution & utilisation system and various system studies as short circuit & earth fault study, relay co-ordination study, load flow study, motor starting & voltage drop study etc primarily in manual in the beginning of career and later in E

Twenty-nine years experience in production operations, twenty-five years in an offshore oil and gas environment.

Project Manager/Engineer with 25 year experience in Oil and Gas Pipeline and related Stations. USA Professional Regestration Mechanical Engineer and Certifiec projectmangement Professional PMI USA. Oversea work prefered including remote sites. Currently with Saudi Aramco, Saudi Arabia.

SKILL SETS. Purchasing Department Director for a large International Organization, Contract Negotiation, Vendor Selection Process Management, Projects Management and Follow Up, Inventory Control Management, Strong Computer Skills

I AM INCLUDING MY RESUME SUMMARY WITH MY RESUME.

International employer with business operations located in Europe, South East Asia, and the USA that is in need of a tech savvy liaison for quality assurance validation of electronics and telecom equipment/applications.

Senior Project Manager/Engineer (Offshore Projects)

I am interested in helping to improve the workplace morale of oil rig workers by conducting highly interactive and motivational workshops.

International Geophysicist with over 23 years experience in all facets of petroleum exploration, created and promoted prospects through use of seismic and well data. Expertise in use of Geoquest and LandMark geophysical software, experience in both 2D and 3D data acquisition and processing.

I have over 22 years of experience in the drilling industry, and have worked in 21 countries. I have an extensive background in all aspects of drilling engineering, completions, production testing, well planning, contracts, operations, and logistics in remote land and offshore operations.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 [ 46 ] 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out