Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #82149 next resume »»
CONTACT INFORMATION:
View contact information...

Post applied for: Plant /Field /Process Operator

Nationality Indian

Date of birth 7th June. 1960

Marital status Married

EDUCATIONAL QUALIFICATION
Passed H.S.C.(12th Science)
From Bombay Board in April 1979.

TECHNICAL QUALIFICATION
* Completed one year training as a
Chemical plant operator.
* Completed Diploma in
Computer Hardware & Networking.

DCS OPERATED Honeywell/ Yakogawa 3000

EXPERIENCE
Total experience of 20 years of which 2 years in Overseas as a Process /DCS Plant Operator In various Gas, Refinery, Petrochemicals & Fertilizers Plants.

During Whole career working in following units.
1 Ethylene Feed System
2 Isobutane Feed System
3 Reactor System
4 Process Condensate Stripping Section (Stripper Column).
5 Methanation Section.
6 Desulphuriztion Section.
7 CO2 Removal Section (Absorption Column).
8 Primary Reformer & Secondary Reformer(Haldor Topsoe).
9 Hydrocarbon Recovery System.
10 Isobutane & Nitrogen Recovery System.
11 Propane Recovery System.
12 Cryogenic Nitrogen Plant
13 D.M. Water Plant.

GULF EXPERIENCE

1. Company:: GASCO HABSHAN GAS PROJECT ABUDHABI
ONSHORE GAS DEVELOPMENT

Duration:: 7th feb 2009 To Till date

Position:: Shift Field / Process Operator

Nature Of Work: Pre-commissioning & Commissioning in
1. Gas Compression
2. Condensate Stabilisation
3. Sour water Treatment Plant

1. Company:: SPF TKP OMIFPRO SNC "Snamprogetti"
For Oman India Fertilizer Project.

Duration: From 04.10.2004 To 30.06.2005

Position: Ammonia Panel Operator, (Commissioning )

Nature of Work:
Pre-commissioning & commissioning Ammonia Plant Based on Natural Gas.
Capacity 2 x 1750 MTPD Ammonia. Commissioning Natural Gas Let Down,
Desulphurization, Reforming, co-conversion section, CO2 Removal section,
Methanation section, Ammonia Synthesis section.

This plant is Haldor Topsoe Technology & equiped with, Primary Reformer,
Secondary Reformer, Shift converter, Gas blower, Synthesis Gas converter,
CO2 Absorber, Regenerator column, Methanator, Stripper, Purge Gas
Absorber, Distillation column, Process Air compressor, synthesis Gas
Compressor, Ammonia compressor, Ammonia Booster compressor, CO2
Booster compressor, H2 Recycle compressor, Steam Turbine, etc. Operating
DCS system with YOKOGAWA CENTUM 3000.

2. Company: Kellogg Brown Root & Technip.
(Parent Company of Halliburton USA)
For Qatar Chemical Project in Qatar.

Duration: 23. 01. 2002 To 22. 12. 2002.

Position: field Leader (Process)

Nature of work:
Pre-commissioning & Commissioning Polyethylene Plant. Capacity 462,000 metric tons per year. Making high density Polyethylene and Linear Low density Polyethylene. Commissioning Reactor system, Ethylene feed system, Isobutane Feed system, 1-Hexane feed system, Hydrogen feed system, Treater Regeneration system, Flash Gas System, Hydrocarbon Recovery & purification,
Nitrogen Recovery system.

A. Commissioning C4 Splitter column, Feeding mix Butane & Recovered Propane, Isobutane & Normal Butane with removing Sulphur.

B. Commissioning Dehexanizer & Deethanizer column. Hydrocarbons (Ethylene, Isobutane & Hexane) feed in to Dehexanizer column & Recovered Hexane & light vapors. This Light vapors sent to Deethanizer column through Overhead Compressor & recovered Recycle Isobutane, Olefine-free Isobutane from bottom & Ethane & Propane from top.

C. Commissioning Isobutane & Nitrogen Recovery system. System equipped with Rotary type screw Compressor, bulk oil separator, Vapor Exchanger, Liquid Exchanger, propane Chiller & PSA Adsorbers.

This is a continuous process & equipped With Vertical loop Reactor, Butane Splitter Column. Dehexanizer column, Deethanizer Column, Pressure swing adsorber, Dryer, Centrifugal & Reciprocating Compressors, Rotary type Screw Compressor, Regeneration Gas Blower, Pumps etc.

Familiar with Safety procedure, Lock Tag & try system, PTW system.

Operating DCS system with Honeywell TDC 3000.

EXPERIENCE IN INDIA

1. Company: Hindustan Petroleum Corporation Ltd.
(Mahul, Chembur, Mumbai. 400 074).

Duration: 22. 10. 1999 To 18. 04. 2000.

Position: Process Operator (DCS).

Nature of work:
Commissioning D.H.D.S. (Diesel- Hydro- De- Sulphurisation) Plant

A. Cryogenic Nitrogen Plant. Capacity 750 Nm3/hr.of Gaseous
Nitrogen + 250 Nm3/hr. of Liquid Nitrogen. Nitrogen purity less than 100 ppm of O2.
This is continuous process & equipped with Expansion Turbine,
Freon Compressor, Vaporizer, Adsorber, M.P. Column, etc.

B. Air Compressor (Centrifugal). Capacity 6000 Nm3/hr. at
8.5kg/cm2 press.
C. Instrument Air Dryer. Capacity 1100 Nm3/hr.at 6 kg Press.

D. D.M. Water Plant. Capacity 1500 M3/day.

E. Bearing Cooling Water Tower. Capacity 250 M3/hr

F. Flare Stack system.

Operated DCS (Honeywell TPS,TDC 3000) system.

2. Company: Oswal Petrochemicals Ltd.
(Formerly Union Carbide India Ltd).
(Anik Chembur, Mumbai 400 074).

Duration: From 12.3.1990 To 15.12.2000.

Position: Senior Plant Operator (Production).

Nature of work:
Petrochemical plant based on Naphtha and Product range consists of
Ethylene, Toluene, Acetic Acid, Ethyl Acetate, Propylene, Butanol,
Benzene Polyethylene etc.

Worked in. Butanol Plant, Polyethylene Plant, Ethylene Gas
Generation Plant and Utility (Air Compressor, Cooling Tower,
Inert Gas Generator).
These are continuous process & equipped with Converter, pumps,
Heat Exchangers, Reboiler, Centrifugal & Reciprocating Compressors,
Blower Refining Column etc.

3. Company: Deepak Fertilizers & Petrochemicals
Corporation Ltd. (Taloja, Dist. Raigad )

Duration: From 4.1.1989 To. 10.3. 1990.

Designation: Chemical Plant Operator (Production ).

Nature of work:
Worked in Liquid Ammonia Plant based on Natural Gas. Capacity
300 MTPD. This is continuous process & equipped with steam
Turbine, Converter, Blower, Gas Compressor (Cooper- Bessemer),
Waste Heat Boiler, Instrument Air Compressor, Absorber Reformer etc.

4. Company: Lubrichem Industries Ltd.
(Bhyander, Dist. Thane).

Duration: From 15.2.1988 To. 31.12.1988.

Designation: Chemical Plant Operator.

Nature of work: Worked in Liquid Paraffin Plant.

5. Company: Hindustan Insecticides Ltd.
(Rasayani, Dist. Raigad).

Duration: From 6.6.1982. To. 11.2.1988.

Designation: Chemical Plant Operator.

Nature of work:
Worked in Mono-Chloro Benzene plant, Benzene Dehydration Plant
These are continuous process With Chlorination & Distillation unit.

WORKED IN FIELD AND CONTROL ROOM IN ROTATION.

A. Operating DCS (Honeywell TPS, TDC 3000) System.
B. Monitor the continuous process.
C. Observe the process parameters. Execute status & alarm
D. Trouble shooting & problem Solving.
E. To lubricate the moving parts of the equipments.
F. To observe the maintenance of the safety equipments.
G. To assist technical group to carry out modifications.
H. To fight fire in case of emergency.
I. Co-ordinate with field personnel & give Instructions.
J. To check operating equipments & parameters regularly to ensure safe & smooth operation.
K. Keep constant vigilance on safety interlocks by checking
Periodically.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1151 to 1200 of 10802)Go to Search Parameters...
Brief Description
Twenty-Eight(28) years of progressive experience in Piping Design with function relevant to all aspects of Font End Engineering and Design, Plant Layouts, Piping Layouts, Isometrics, Material Take Off, Stress Analysis, Procurement and Preparation of Specifications, Plant Modifications, etc.
Experienced production supervisor
Observer / Senior Observer /Chief at Schlumberger -WesternGeco International Resources ( WGIR Libya 3 D Projects ) with Sercel 408 UL CMXL /428 Recording instruments and VE432/64 vibroseis electronics using source navigation
To apply my skills as I am very much fascinated by Power & Desalination Plant Process Quality Control & Environmental Laboratory chemist. I would strive to learn new developments in boiler water treatment & Environmental sciences so that I can carve a place for myself in this field.
Over 13 years piping stress and mechanical engineering experience with EPC companies in Sinopec, China, Fluor Canada and Jacobs Canada
Joined E & P Company in 1989 and have worked in both onshore and offshore at different positions. As co man supervise operations on Desert Rig deployed for drilling and work over wells. Prior to current assignment worked as co man on jackup rig. Ensure operations are carried out safely & efficiently
My various experience in the Safety field has included so far about three years in KCA DEUTAG Drilling GmbH Company drilling company as Rig-site HSE Advisor in Libya,four years position as HSE Coordinator at Drilling Waste Management Company(Tunisian company),Prior to that I was a Chief of District
Having substantial knowledge and experience (14 years) in Piping/Mechanical engineering, especially in the Piping Engineering and Design. Involved in industrial plant, petrochemical. Expert in PDMS, including Design, Draft, Isodraft and ability to design and drafting Pipe support using MDS
Senior Welding Inspector QA/QC
Total experience of 20 years of which 2 years in Overseas as a Process /DCS Plant Operator In various Gas, Refinery, Petrochemicals & Fertilizers Plants.
27 years experience as Drilling supervisor.
Under Ground Piping Specialist
Engaged for more than 14 yrs in extensive work in the field of piping, structural and welding inspection, supervision of piping, erection, material preparation and scheduling based on the given scope of work.
Accomplished petroleum exploration and production manager of people and projects. Proven broad-based experience in multi-disciplinary exploitation of petroleum reserves, evaluation work in acquisition and divestitures, information technology and project management.
Twenty-Four years experience in the administration of Oil & Gas property documentation inclusive with, land management, mineral leasing, landman duties encompassing lease conversions, reimbursements, compensations, and shut-in royalties. Serving as a generalist for my first ten years and as a speci
A Civil/Structural Engineer having 14+ years of Consultancy experience in Structural Design and Project Management for Process, Oil & Gas and Power & Energy Projects. I have good knowledge and experience of Canadian, British, Indian, American & various Process industry standards.
Control System engineer with more than 14 years of experience with Yokogawa Systems Engineering
20 Years plus: Industry sector, Expertise Platform construction, Fitter/Mechanic, Contract Supervisor, Offshore Heath & Safety, Supervisor/Trainer, Drilling Offshore, Rig Mechanic/Chief Mechanic, Drilling Onshore & Offshore.
40 Years Experience - Drilling Sector - Experienced Drilling Consultant / Superintendent, Work-Over/Completion
Electrical & Instrumentation Engineer experienced in Testing & Commissioning Instruments in FPSO, Installation of Electrical services in the Power plants (Gas turbine, Hydro, Steam turbine), Commercial Buildings, MRT and Commissioning of Process Control System in Water Treatment Plant.
APPLICATION FOR THE POST OF BLASTING AND PAINTING SUPERINTENDENT
I have different skills from farming to superivor to general labor skills inthe oil and gas industary.amd also I have some sales experance
Worked in Precommissioning,commissioning,start up of Refiner, Petrochemical, GasPlant,worked on DCS system and fields aswell,Fully ocnversant with HSE policies. Undergone training of Fire and Gas.
Lead Drilling Fluids Engineer / Mud Engineer / Drilling fluids specilalist/ Mud Manager/Drilling Supervisor/ Drilling Engineer
Drilling, Completion Wellsite consultant
I am Mech Engg post graduate(Prodn Engg). I have experience in using CAE packages Hypermesh,Ansa and Nastran and performing static ,Normal mode and fatigue analysis
28 years experience with industrial design drafting work. Assignments have involved equipment layouts, P&ID development, material take-offs, estimating, checking and field work in addition to developing construction drawings and fabrication isometrics.
Electrical Technician with 20 years experience in the oil and gas industry.
Executive Recruiter, Recruiter, Contract Recruiter
am right now working at OXY in Santa Cruz with WO & Completion jobs related.( as a work over site Manager) am interested in your global opportunities so Ihave attached my resume with actual phones and emails.I have experience managing different kind of peoples and oil specialties.
been welding for 25 plus years...
A total of 10+ years experience in Pipe Stress Engineering and Mechanical Stress Analysis in
Good knowledge in delivering commercial operational management including specialist area of hydrocarbon business and regulatory compliance and administration (Production Sharing Contract, Joint Operating Agreement and Gas Sales Purchase Agreement, fiscal terms)
QA Manager with 23+ years diverse experience
All STCW certificates are valid and available
Water-flooding, reserve estimation, production forecasting, economic & risk analyses, reservoir characterization, tracer & pressure transient analyses. Well surveillance for development opportunities. Some thermal experience. Simulation experience to predict performance & optimize development plans.
Having 20 years of professional experience in various aspects of Detailed Engineering, Pre-bid engineering and Construction supervision & commissioning activities related to Control & Instrumentation (C&I) System for Oil & gas, Refinery, LNG & Petrochemical and power plants.
Petroleum Engineer with 13 years experience in the Oil and Gas Industry with solid knowledge in Geopressure analysis, Well design, MWD operations and rock properties analysis; project management skill (estimating/cost, control/scheduling); bilingual Spanish-English; APEGGA EIT# 92804 and Worldwide.
To obtain a position as Suitable position in process control Instrumentation that allows me to expand my current skill set with technical challenges and career development opportunities to enhance the achievement of corporate goals.
Highly Qualified Draughtsman
Science bachelor degree & safety management diploma and HSE Supervisor Technician with 13 years of experience, Worked for drilling operation, Production operation on offshore and onshore as a HSE technician, advisor and supervisor. Drilling experience as well as driller hand ,Experience managing
A competent & self motivated professional with the ability to work independently and as part of a team within a highly pressured, fast moving environment with 10 years of qualitative and enriching experience in the field of Logistics, Supply Chain, Freight Forwarding, & Operations
An astute, detail-oriented professional who excels under the pressure of time constraints and possesses the determination to always exceed expectations. 

Summary of selected Accomplishments responsible for career total of more than 500 placements!
Rock physics, Petrophysics, Quantitative seismic Interpretation, AVO, reservoir modeling, generation of synthetic seismograms
Total Of 16 Years Experience In Drafting And Detailing Of Piping Drawings And Other Drawings In Compliance With The International Standards. Experience Achieved Is In Line Of The Chemical / Petrochemical / Refinery And Connected Utilities Piping Jobs.
Seeking employment as Telecom Engineer in a competitive environment for a position offering challenge, diversity and opportunity for professional advancement, having strong learning aptitude along with analytical and interpersonal skills.
OBJECTIVE: To obtain contract or full time position as a Document Control or Records Administrator and/or other related job.
PDMS mid-level piping designer with a specialty in PDMS DRAFT, Misc. pipe supports, equipment modeling and sloped pipe.
Production/drilling engineer hold Master from IFP; working in Workover operation
Free! Worked as a Drilling Fluids Engineer / Technical Service Coordinator for the past 13 years.
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   [ 24 ]   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com