Resume - Having substantial knowledge and experience (14 years) in Piping/Mechanical engi...

Misco Jobs

Resume #82185

CONTACT INFORMATION:
View contact information...

Education
- Senior High School Of Ship Building Technology, Sidoarjo.
- Bachelor degree in Mathematic Informatics, Sepuluh Nopember Institute Technology (ITS) - Surabaya

Training and Qualification:
- Contractor Risk Management Programme, CoRMaP by Unocal Balikpapan, 2003
- Autocad (2D & 3D), Learning and Practical Module, Surabaya 2002
- English for Business, EF (English First), Surabaya, 2005
- CADWORX Plant, 3D Plant Modelling and Isometric with Isogen, Surabaya, 2005
- PV ELITE, Pressure Vessel Design and Analysis, CCIT AND COADE Engineering,
Indonesian University (UI),Jakarta 2005
- Introduction to HRSG and Boiler, Alstom Power Surabaya, 2006
- PDMS Design and Drafting, and PDMS ALSTOM Add on Area, Alstom Surabaya, 2006
- MDS, Multi Discipline Support.

IT Software:
- PDMS (Expert), CADWORX Plant (Expert), AutoCad (Expert), PV Elite (Course)
- MS Excel, Outlook, MS Access, MS Power Point.

Language:
- English (fluent both spoken and written)

Work Experience:
Sime Darby Engineering, Sdn Bhd
June 2008 - Present
PDMS Piping Designer

Maersk Oil Qatar – EPCCI of SBE & SBG Platform Al Shaheen Block 5 Development
Petronas Carigali Sdn Bhd – PC of Kumang (F9JT & KUJT) and Tangga Barat Drilling Platform ( LHDP & MLDP) & Central Processing Platform of Kumang (KAKG).
Prepare Layout of piping, Isometric of Pipe for fabrication engineering on PDMS 11.6
Prepare Remaining Pipe Support modelling and extract from MDS Draft for deliverable pipe support detail drawings. Reporting Global MTO of Piping component and Pipe Support based on PDMS. Customize MDS to suit with company support standard and specification.

PT Amec Berca Indonesia
November 2007– June 2008
PDMS Piping Designer

Total Indonesie – Detail Engineering of Tunu 12 Gathering and Testing satellites
Prepare PDMS Piping modelling, Prepare Plot Plan, Piping Plan, Piping and Support Location Drawing. Generate piping Isometric and configure it to suit with company isometric standard. Prepare PDMS Review for regular client review meeting.

PT Alstom Power Indonesia
August 2006-November 2007
PDMS Piping Designer

Project: - NewGen Power Plant, Kwinana
- Emsland Power Plant
Updating of piping and equipment model as per site modification and Client information.
Check for the completeness of piping layout in plan drawing after the extraction of isometrics prior to submission for construction.
Review the plan layout and general arrangement drawing and do PDMS piping Modeling.
Review the model for any clashes through the use of PDMS Clasher and resolve the clashes.
Check & back check piping plan drawing, equipment layout, pipe support location plan, and isometric.
Crosscheck global MTO from PDMS with piping material tracking and Prepare Weight Control Report.
Communicates and interfaces with other project design and engineering disciplines.

PT PAL Indonesia
July 2004 – August 2006
Position: Piping Designer

Project:
Amerada Hess - EPCI of an Offshore Wellhead Platform and Wet Gas Subsea Pipeline Ujung Pangkah Development
CNOOC - Zelda F monopod Platform fabrication South East Sumatra Gas Project
UOP LLC - Blue Sky project, Balongan

Engineering Construction for Piping scope, generate shop drawing, isometric drawing, produce MTO.

PT PAL Indonesia
May 2001 – July 2004
Position: Proposal Project

Project:
Unocal - TLP-B West Seno Project, Pass & Qualified Technical Proposal
Amerada Hess - EPCI of an Offshore Wellhead Platform and Wet Gas Subsea Pipeline
Ujung Pangkah Development Amerada Hess,2003, Contract Award
KODECO - KE-32 Development Project, Onshore Fabrication Project, Contract award
EMP KANGEAN - EPCI of FPU HULL & MOORING TSB Development, Contract Award

- Prepare technical proposal for bid, Manufacturing Process Plan, execution plan.
- Generate bill of material.

PT PAL Indonesia
April 1995 – May 2001
Position: Piping Cad Drafter
Responsibilities: Prepare Piping Drawings for the project mentioned below, and other drawings to support construction activities. Perform site visit.

Project: 42000 DWT Open Hatch Bulk Carrier Project – M141
October 2000 – February 2001
Position: Piping Cad Drafter
Prepare Piping Arrangement, Piping Isometric, Pipe Support in Engine Room space. Record piping MTO.

Project: Assignment to PT. Palamec Indonesia - PT. Bakrie Engineering, Jakarta
YPF MAXUS – P&ID As-built Project
May 2000 – October 2000
Position: Piping Cad Drafter
Responsible for producing as-built drawing of P&ID in the electronic files (AutoCad), as per survey result from offshore platform in Maxus Area's NBU & CBU. Record line list of line numbers. Maintain drawings performance as per Client Standard.

Project: PALWA BUANA 1600 TEU'S – Container Ship Project
March 1998 – May 2000
Position: Piping Cad Drafter
Prepare Piping Arrangement, Piping Isometric, Pipe Support, Pipe Penetration Drawings, & MTO on Hull Parts. Perform site clarification on piping installed on hull.

Project: Assignment to PT. Pal – Amec Joint Operation, Surabaya
ARCO CCO-341 Project - Fabrication of the MMC Train 'C' and Train 'D' Compressor Module
September 1996 – December 1997
Position: Piping Cad Drafter
Engineering Construction for Structural and Piping scope, generate shop drawing, produce MTO.

Project: Assignment to PT. Pal – Amec Joint Operation, Surabaya
ARCO CCO-300 Project - Fabrication of the KLC Platform and Pipespools for MMC Enhancement Project
April 1995 – December 1995
Position: Piping Cad Drafter
Engineering Construction for Piping scope, generate shop drawing, isometric drawing, produce MTO.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1151 to 1200 of 10923)

Go to Search Parameters...

Brief Description

Over Sixteen Years of OSP/ISP Site Inspector/ Configuration Controller Experience in Saudi Arabia with Commercial, Civil and Govt.

Having Technical qualification and more than 14 years experience Offshore - oil gas and Refinery experience looking for good oppertunities.

Able to make piping design from conceptual to detail design and field engineering work( see career summary on my resume)

CATIA V5 (1600 Hours), Kaizen/Kanban - Continuous Production Improvement, Lean Manufacturing/Six Sigma, Microsoft Office Systems

Senior Paint/Coatings ; Offshore & Marine New Building

Experienced Well Services, Completion, Workover, Wireline and Well Test Supervisor. 26 years Otis Eng. Corp and Halliburton. 7 years free consultant. 2 1/2 years Bapetco/Shell, Egypt.

QA/QC Engineer-International projects-Oil&gas industry

Highly motivated, energetic, hardworking, result oriented QA/QC professional, with Master of Science (Chemistry) who is well organized, flexible and determined to exceed performance standards. Offer a broad technical background with 22 years of profound petrochemical experience.

I have 14.5 years of experience in the field of instrumentation/control system engineering for Oil/Gas industry. I have served with Reliance Industries Limited (A Indian largest Oil/Gas/Petrochemical Company ) & and SABIC (A Saudi Arabia largest Oil/Gas/Petrochemical Company).

More than 15 years of comprehensive knowledge and experience in the field of electrical and instrumentation engineering. Over 12 years of involvement in inspection and construction of Oil & Gas, Petrochemical, and Utilities Plants. Have good knowledge in implementation of SHELL DEP (Design and Engin

Pre-commissioning, commissioning, de-commissioning & Re-commissioning of Hydrocarbon tanks/LPG bullet/Double Wall Ethylene tanks & hydrogen bullets(150 kg/cm2) for statutory inspection ,Gas Turbine commissioning, Safety measures in Hydrocarbon storage, loading & handling system, SAP Operation

More than 15 years total experience on combined field in construction, inspection, engineering project management, commissioning and maintenance of instrumentation and control on gas and oil production facilities, geothermal, power, petrochemical and oleo chemical refinery plants. Extensive knowledg

Analyst/Technical Assistance for reservoir/production operations

I have extensive experience as a process engineer in refining and oil production that I would like to put to use in a technical service or economics and planning management position.

Chief Engineer/ Barge Mechanic with work experience more than twenty years incl. 8 years of Offshore (Juck-up's - 5 years). Education: Maritime Academy (five years course). CEng, MIMarEST.

Vast experience in Well and Reservoir Surveillance, Integrated Reservoir Studies, Integrated Production Systems Modeling, Well Optimization Production Engineering and Hydrocarbon Accounting. Proven record of accomplishments in deepwater production operations in the U.S. and West Africa

Electrical Engineer

Twenty-Eight(28) years of progressive experience in Piping Design with function relevant to all aspects of Font End Engineering and Design, Plant Layouts, Piping Layouts, Isometrics, Material Take Off, Stress Analysis, Procurement and Preparation of Specifications, Plant Modifications, etc.

Experienced production supervisor

Observer / Senior Observer /Chief at Schlumberger -WesternGeco International Resources ( WGIR Libya 3 D Projects ) with Sercel 408 UL CMXL /428 Recording instruments and VE432/64 vibroseis electronics using source navigation

To apply my skills as I am very much fascinated by Power & Desalination Plant Process Quality Control & Environmental Laboratory chemist. I would strive to learn new developments in boiler water treatment & Environmental sciences so that I can carve a place for myself in this field.

Over 13 years piping stress and mechanical engineering experience with EPC companies in Sinopec, China, Fluor Canada and Jacobs Canada

Joined E & P Company in 1989 and have worked in both onshore and offshore at different positions. As co man supervise operations on Desert Rig deployed for drilling and work over wells. Prior to current assignment worked as co man on jackup rig. Ensure operations are carried out safely & efficiently

My various experience in the Safety field has included so far about three years in KCA DEUTAG Drilling GmbH Company drilling company as Rig-site HSE Advisor in Libya,four years position as HSE Coordinator at Drilling Waste Management Company(Tunisian company),Prior to that I was a Chief of District

Having substantial knowledge and experience (14 years) in Piping/Mechanical engineering, especially in the Piping Engineering and Design. Involved in industrial plant, petrochemical. Expert in PDMS, including Design, Draft, Isodraft and ability to design and drafting Pipe support using MDS

Senior Welding Inspector QA/QC

Total experience of 20 years of which 2 years in Overseas as a Process /DCS Plant Operator In various Gas, Refinery, Petrochemicals & Fertilizers Plants.

27 years experience as Drilling supervisor.

Under Ground Piping Specialist

Engaged for more than 14 yrs in extensive work in the field of piping, structural and welding inspection, supervision of piping, erection, material preparation and scheduling based on the given scope of work.

Accomplished petroleum exploration and production manager of people and projects. Proven broad-based experience in multi-disciplinary exploitation of petroleum reserves, evaluation work in acquisition and divestitures, information technology and project management.

Twenty-Four years experience in the administration of Oil & Gas property documentation inclusive with, land management, mineral leasing, landman duties encompassing lease conversions, reimbursements, compensations, and shut-in royalties. Serving as a generalist for my first ten years and as a speci

A Civil/Structural Engineer having 14+ years of Consultancy experience in Structural Design and Project Management for Process, Oil & Gas and Power & Energy Projects. I have good knowledge and experience of Canadian, British, Indian, American & various Process industry standards.

Control System engineer with more than 14 years of experience with Yokogawa Systems Engineering

20 Years plus: Industry sector, Expertise Platform construction, Fitter/Mechanic, Contract Supervisor, Offshore Heath & Safety, Supervisor/Trainer, Drilling Offshore, Rig Mechanic/Chief Mechanic, Drilling Onshore & Offshore.

40 Years Experience - Drilling Sector - Experienced Drilling Consultant / Superintendent, Work-Over/Completion

Electrical & Instrumentation Engineer experienced in Testing & Commissioning Instruments in FPSO, Installation of Electrical services in the Power plants (Gas turbine, Hydro, Steam turbine), Commercial Buildings, MRT and Commissioning of Process Control System in Water Treatment Plant.

APPLICATION FOR THE POST OF BLASTING AND PAINTING SUPERINTENDENT

I have different skills from farming to superivor to general labor skills inthe oil and gas industary.amd also I have some sales experance

Worked in Precommissioning,commissioning,start up of Refiner, Petrochemical, GasPlant,worked on DCS system and fields aswell,Fully ocnversant with HSE policies. Undergone training of Fire and Gas.

Lead Drilling Fluids Engineer / Mud Engineer / Drilling fluids specilalist/ Mud Manager/Drilling Supervisor/ Drilling Engineer

Drilling, Completion Wellsite consultant

I am Mech Engg post graduate(Prodn Engg). I have experience in using CAE packages Hypermesh,Ansa and Nastran and performing static ,Normal mode and fatigue analysis

28 years experience with industrial design drafting work. Assignments have involved equipment layouts, P&ID development, material take-offs, estimating, checking and field work in addition to developing construction drawings and fabrication isometrics.

Electrical Technician with 20 years experience in the oil and gas industry.

Executive Recruiter, Recruiter, Contract Recruiter

am right now working at OXY in Santa Cruz with WO & Completion jobs related.( as a work over site Manager) am interested in your global opportunities so Ihave attached my resume with actual phones and emails.I have experience managing different kind of peoples and oil specialties.

been welding for 25 plus years...

A total of 10+ years experience in Pipe Stress Engineering and Mechanical Stress Analysis in

Good knowledge in delivering commercial operational management including specialist area of hydrocarbon business and regulatory compliance and administration (Production Sharing Contract, Joint Operating Agreement and Gas Sales Purchase Agreement, fiscal terms)

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [ 24 ] 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out