Resume - I have drilled over 100 wells, both explorational and development. I have direct...

Misco Jobs

Resume #82226

CONTACT INFORMATION:
View contact information...

PROFILE

* Exploration Geologist, 10 years of professional experience, including 7 years of Oil and Gas experience
* Took part in the implementation and application of "program-based" drilling policies, resulting in 40% savings in drilling costs
* Integrated seismic data with geology
* Mapping and active development of various reservoir types, including:
-Cretaceous, conventional, clastic reservoirs
-Cretaceous coal bed methane
-Cretaceous tight-sand and shale gas reservoirs
-Paleozoic carbonates
* Have worked in a team of geologists, geophysicists, and engineers developing exploration and development opportunities
* Professional knowledge of: Geological Mapping; Well Log Analysis and Formation Evaluation; DST Analysis
* Exploration Areas: Western Canada Sedimentary Basin, Bulgaria
* Software: Microsoft Office, Accumap, Acculog
* MSc in Petroleum Geology from the University of Calgary
* BSc in Geological Engineering from the University of Mining and Geology, Sofia, Bulgaria
* Member of APEGGA

PROFESSIONAL EXPERIENCE

Paramount Energy Trust 2002 - 2009
Dominion Exploration Ltd

GEOLOGIST, Paramount Energy Trust, 2007-2009
* Geologist in charge for a defined region within the company's Central Alberta assets
* Drilled 25 wells since June 2007; added an average of 350MMcf of reserves per well; achieved an F&D cost of CAD 2.10/mcf with an average well success rate of 88%
* Responsible for maintaining 2500 BOE/D production
* Responsible for monitoring 300+ existing wellbores – optimizing production, and addressing all government related issues
* Evaluated other companies' properties for possible take over
* Major involvement in land sales, land expiries, and dealing with offset notices

GEOLOGIST, Dominion Exploration Ltd, 2002 - 2007
* Drilled 80+ wells; added an average of 250 MMcf of reserves per well
* Initiated a 100+ well recompletion program
* Exposed to 2D and 3D seismic data on a daily basis
* Detailed mapping of Cretacous sands and coals in East-Central Alberta
* Took part in identifying and developing a potentially huge shale gas play
* Developed extensive reservoir characterization and established criteria for recognizing of bypassed pay within the Cretaceous Viking Formation
* Correlated and subdivided Cretaceous, clastic formations in more than 2200 wells over 2500 square miles
* Identified and assessed formation damage leading to improved completion and well stimulation techniques
* Created structure and isopach maps on Paleozoic carbonate formations in 900 wells over 1100 square miles
* Used well log analysis and interpretation to evaluate areas of interest for missed opportunities

Navan Resources (Ireland) 1997 – 2000
EXPLORATION GEOLOGIST
* Involved in drilling operations and core logging
* Developed play concepts, leading to recommendations for new drilling locations
* Supervised a team of up to 15 people
* Took part in an exploration program leading to the discovery of a major gold deposit

EDUCATION

Master of Science, University of Calgary November 2005
Major: Petroleum Geology
Research Project: Lithology and Depositional Environment in sediments from the Clearwater Formation, Burnt Lake, Alberta
Course Work: Geology and Geophysics of Western Canada; Geological History of Western Canada; Well Logging and Formation Evaluation; Clastic Reservoirs in Canada; Exploration, Data Contouring, Mapping and Interpretation; Geophysical Interpretation

Bachelor of Science, University of Mining and Geology, Bulgaria June 1997
Major: Geological Engineering

LANGUAGES
* Fluent English
* Fluent Bulgarian
* Fair Russian

REFERENCES
* Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2151 to 2200 of 10917)

Go to Search Parameters...

Brief Description

For the past 15 years I have been employed in petrochemical piping & Power Plant design & drafting utilizing Autocad, Microstation, 3D CADWORX, Plant 4D Programs and Field surveying using Total station and 3D Leica ScanStation 2, using Cyclone and CloudWorx programs to obtain as-builts of existing f

Studying M. Sc I Year (Environmental Science) in Distance Mode B. Sc Diploma in Occupational Safety Health and Environment ,First aid training

Free! An MBA graduate with 6 years of work experience in the oil and service-related industries. Experience in ESP, HPS, VSDs, PLCs, HMIs, and SCADA systems. Additionally, I have experience in project management.

Planning Engineer, Workshop Management, Maintenance and Material control, Safety Officer, AutoCAD, Fleet Management System Software(FMS),IVMS Download, Internet Skill, MS Word, Ms Excel, Corel Draw, Primavera Project Planner (P3), Ms Project, Power Point, Ms Dos, Publisher, Page Maker, Etc

9 years of rich work experience in Project Controls, Planning & Scheduling functions in the field of Oil & Gas, Petrochemical/Chemical Plants.

Having more than Twenty (20) years of experience in the field of Supervision and Inspection of Welding, Piping Fabrication and Installation in the Heavy Industrial construction such as Oil and Gas Plants, Power Generating Plants, Petro-Chemical and other Industrial Insta

Fifteen years of rich and cross cultural experience in Instrument Construction Supervision, Instrument Inspection, Commissioning and Troubleshooting Maintenance Work of all types of Instruments.

Radio Operator / AB Seaman

B. Sc. with Chemistry along with the 14.5 years of professional and project in petrolium refinery . Precommissioning & commission assistance in, LPG RECOVERY , ACID GAS REMOVAL , FUELGAS/NAPTHA RECOVERY

Free! All round drilling expertise from driller up to management. Managed on- and offshore drilling campaigns world-wide. Shell Round II. Currently head of drilling rig planning, acquisition and divestment for Shell Malaysia. Analytical and problem-solving capabilities. Broad engineering background.

Experienced Land/Right of Way Agent

petrololeum

Subsea systems (Controls, Trees and Wellheads). Service and Manufacturing of downhole drilling tools, BHA components, DD equipment & fabrication. Project team, QS, FAT, MC & ITP. Internal/external Audits, Procedural writing and MRB’s. ISO 9001:2008. UT, MP & UT Level 2.

self starter, great communication skills, great with microsoft programs, familiar with oilfield environment

13 years of experience in Engineering Projects & Maintenance, design engineering, construction and commissioning of instrumentation in petrochemical and chemical industries involving detailed engineering including, project estimation, preparation of instrument specification, comparison statement ,pr

18 years petrochemical experience, senior engineer

10 Year experience in FEED & Detail engineering of Electrical System in Oil & Gas, onshore Plat-form, Petrochemical Plant, Automobile sector and Pharmaceutical Industries

HSE Executive

Numerical Simulation (Eclipse/Petrel RE), Analytical tools(PROSPER/MBAL), Well testing, reserves estimation, material balance,decline curve analysis, production testing

10 yrs in safety management

Chemical Laboratory Analyst / Chemical Process Technician.

Experienced rig medic

PROJECT ENGINEER / ROTATING ENGINEER / ELECTRICAL ENGINEER

Quality Engineer

Seven years of Process/Project engineering experience encompassing process design, process safety management and regulatory compliance, Project scope development, Project scheduling, Project execution strategy. Areas of process design specialization include relief system design, equipment design.

Process Technician with 9+ years of experience

Process Engineer

Experience in developing PFD’s and P&ID’s to IFD and to IFC.Experience in line sizing, pump sizing, control valve sizing, relief valve sizing and vessel sizing. Experience in preparing LDT documents, Rev Lists. Proficiency in process design software like ASPEN PLUS,HYSYS, PRO II.

Trouble shooting of problems in various field instruments, DCS (Honeywell – TDC3000), I Have deep knowledge in Gas Turbine and Compressor related instrumentation systems

I have drilled over 100 wells, both explorational and development. I have directly planned and executed major drilling, recompletion, and completion programs. I have designed well logging programs. I have also participated in extensive reservoir characterization studies.

Experienced distribution center in-charge, materials planning and control handler, and warehouseman (total 14 years) and mechanical engineer in practice as power plant maintenance and engine tender. Computer literate, resourceful, constructive decision maker. Easily adapts to any working environment

Construction/Commissioning Instrumentation & Control Superintendent, or Project Management (PMC-role), or I & C Field Engineer/Supervisor, or I & C Maintenance Engineer

16 Years of Experience; Experience in managing the Quality control & Quality assurance activities for large integrated engineering projects. Exposure in vendor documents, correspondences with client, vendor, carrying on stage & final inspection with client. Exposure to International code

Planning & Scheduling by Primavera P3; Structural Design by STAAD-PRO 2004

From 2005 Clough Engineering & Integrated Solutions (CEIS) Pty Ltd

Structural draughtsman, working sice last 14 yeards, with 2 yrs. gulf experience,

Boiler Purchasing, erection, commissioning, startup, troubleshooting experience.

A well-rounded production person having worked at all levels from production operator through control room lead tech to supervisor. Trained in all aspects of the oil and gas industry (well heads, 3-phase separation, compression, reciprocation, turbine, centrifugal, refrigeration, gas lift, gas injec

Well verse in blasting and painting for the past 20 years

Sutina is the Country Knowledge Manager for Deloitte Consulting Malaysia. She has 5 years knowledge management experience in the professional services environment. At present, she works extensively with the firm's intranet, soliciting and managing content, establishing guidelines and processes.

8+ years of experience in the field of IT with experience mainly in Customized Enterprise Planning Solutions (ERP), Business Process Management (BPM) and Management Information Systems (MIS). Wide experience of System Analysis, Project Management and Client handling.

I have 30 years experience working in Oilsands Upgraders as a control room operator and start-up and commissioning operator. I am currently working on expansion and growth plans of Suncor for their MNU Project. I work with Engineering houses to include operations input for operability and safety in

Handling of ATF, Refuelling/Defuelling of aircraft.

Sales of Industrial products like Pumps,Mechanical Seals, Fluid Sealing Products

I'm a qualified Medical Graduate (MBBS) with almost 14 years of Clinical Work experience, mostly in the areas such as Emergency Medicine, Internal Medicine, Trauma, Tropical & Infectitious Diseases and Public Health.

25 years experience in IT industry, now specializing in J2EE, Service Oriented Architecture (SOA) and Radio Frequency ID (RFID) solution integration to Enterprise Information Systems (EIS). Willing to travel 100% worldwide.

Chemical Engineer with more than 20 years experience in construction, testing, precommissioning and commissioning of utility plants in Oil & Gas, Fertilizer and Petrochemical industries.

I'm a Science Graduate. B.Sc., from Andhra University, INDIA in 1985, Working as Comissioning Engineer With LURGI team since Sep-2007. well versed with Pre commissioning, commissioning, start up, Normal/ Emergency shutdown activities and performance test of PDH (Propane D ehydrogenation) Plant.

Has over 20 years experience in EPCM projects with extensive experience in purchasing, contract administration, cost estimating and production planning. Relevant manufacturing experience in pressure vessels, plate works.Language skills: English, French, Spanish, German, Portuguese.

Well rounded trainer/instructor/worker who is willing to be a part of a team whose primary goal is safe and effective work efforts. I am fully European standards trained airport/commercial property fire fighter and also multi skilled in various areas such as mechanics and repairs.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 [ 44 ] 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out