Resume - Process Engineer

Misco Jobs

Resume #82420

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVE:

Seeking a challenging and responsible position as Senior Process Engineer in Refining, Petrochemical, Oil and Gas Industry.

SUMMARY OF QUALIFICATIONS:

Over ten (10) years of Process Engineering experience in refining, oil and gas and petrochemical projects. Major activities include the following:

* Preparation of PFDs, P&IDs, LDTs, process simulations and process control philosophies.
* Hands-on hydraulics calculation, material and energy balance.
* Developed specifications and datasheets for process equipment and instruments.
* Experience in selection, sizing and design of process equipment.
* Familiar and knowledgeable with API, ASME, TEMA, ASTM and other frequently used Industry Standards and Procedures.
* Hard working, excellent team member, goal oriented, schedule driven and capable of interacting effectively with other engineering disciplines

EDUCATION AND PROFESSIONAL CERTIFICATION:

Bachelor of Chemical Engineering, 1995
Registered Professional Engineer with PEO

SOFTWARE SKILLS:

* Familiar with process simulation software such as HYSYS®, Aspen Plus®, Pro II and MS Project.
* Hands-on experience in Distributed Control System: Honeywell - TDC 3000

PROFESSIONAL EXPERIENCE:

KBR Inc. Houston TX, Sr Technical Professional

50,000 BPD Hydrotreater Revamping Project for ConocoPhillips Refinery, Borger, TX

* Performed detail engineering design for 50,000 BPD Hydrotreater Unit (HDS).
* Prepared and reviewed PFD, P&ID, demotions drawings and LDTs.
* Developed specifications and process datasheets for process equipments and instruments.
* Reviewed line sizing, pump hydraulic calculations and mentor junior process engineers.
* Participated in PHA and resolved PHA recommendations.
* Prepared good tracking for MOC and process changes.

400,000 BPD Yanbu Export Refinery Project (ConocoPhillips and Saudi Armco), Yanbu, Saudi Arabia

I have worked as part of process design team to execute FEED package for a 400,000 bpd grass-root Refinery to process Arabian crude oil into diesel, gasoline, and LPG products for European, US and Asian markets. I have performed all process / system engineering activities for 215,000 BPD Amine Regeneration Unit (ARU) and Sour Water Stripper Unit (SWS).

CH2M HILL Ltd. Calgary AB, Process Engineer

* Performed front-end and detail engineering designs.
* Prepared and reviewed PFDs, P&IDs, UFDs and LDTs.
* Prepared material and energy balance and developed specifications and process datasheets for process equipment and instruments.
* Performed Line sizing, hydraulic calculations and process equipment sizing.
* Participated in HAZOPs and resolved HAZOPs recommendation.
* Safety valve sizing and pressure relieving systems.

Vantage engineering Inc. Calgary AB, Process engineer

* Major accountability in process simulation with HYSYS®, Aspen Plus®, process design and equipment sizing and selection for oil and gas facilities and utilities.
* Performed front-end, conceptual and detail engineering designs.
* Prepared and reviewed PFDs, P&IDs, and LDTs.
* Developed specifications and datasheets for process equipment and instruments.
* Prepared line sizing, hydraulic calculations and process equipment sizing (e.g. pumps, two phase separator, glycol contactor, heat exchangers, and control valves).

TRAINING:

* PIPEFLO7 Advanced Applications, Neotec Inc.- Calgary
* Compressor fundamental – Toromont energy system - Calgary
* Fundamentals of Hydraulic Calculations - IIT, Mumbai

EMPLOYMENT HISTORY:

KBR Inc. Houston TX, Sr Technical Professional 2007 - 2009
CH2M Hill Ltd. Calgary AB, Process Engineer 2006 – 2007
Vantage Engineering Inc. Calgary AB, Process Engineer 2005 - 2006
Rajashree Polyfils Ltd. India, Sr. Process Engineer 1998 - 2004
Kadakia Chemical Ltd. India, Process Engineer 1995 - 1998

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2151 to 2200 of 10917)

Go to Search Parameters...

Brief Description

Studying M. Sc I Year (Environmental Science) in Distance Mode B. Sc Diploma in Occupational Safety Health and Environment ,First aid training

Free! An MBA graduate with 6 years of work experience in the oil and service-related industries. Experience in ESP, HPS, VSDs, PLCs, HMIs, and SCADA systems. Additionally, I have experience in project management.

Planning Engineer, Workshop Management, Maintenance and Material control, Safety Officer, AutoCAD, Fleet Management System Software(FMS),IVMS Download, Internet Skill, MS Word, Ms Excel, Corel Draw, Primavera Project Planner (P3), Ms Project, Power Point, Ms Dos, Publisher, Page Maker, Etc

9 years of rich work experience in Project Controls, Planning & Scheduling functions in the field of Oil & Gas, Petrochemical/Chemical Plants.

Having more than Twenty (20) years of experience in the field of Supervision and Inspection of Welding, Piping Fabrication and Installation in the Heavy Industrial construction such as Oil and Gas Plants, Power Generating Plants, Petro-Chemical and other Industrial Insta

Fifteen years of rich and cross cultural experience in Instrument Construction Supervision, Instrument Inspection, Commissioning and Troubleshooting Maintenance Work of all types of Instruments.

Radio Operator / AB Seaman

B. Sc. with Chemistry along with the 14.5 years of professional and project in petrolium refinery . Precommissioning & commission assistance in, LPG RECOVERY , ACID GAS REMOVAL , FUELGAS/NAPTHA RECOVERY

Free! All round drilling expertise from driller up to management. Managed on- and offshore drilling campaigns world-wide. Shell Round II. Currently head of drilling rig planning, acquisition and divestment for Shell Malaysia. Analytical and problem-solving capabilities. Broad engineering background.

Experienced Land/Right of Way Agent

petrololeum

Subsea systems (Controls, Trees and Wellheads). Service and Manufacturing of downhole drilling tools, BHA components, DD equipment & fabrication. Project team, QS, FAT, MC & ITP. Internal/external Audits, Procedural writing and MRB’s. ISO 9001:2008. UT, MP & UT Level 2.

self starter, great communication skills, great with microsoft programs, familiar with oilfield environment

13 years of experience in Engineering Projects & Maintenance, design engineering, construction and commissioning of instrumentation in petrochemical and chemical industries involving detailed engineering including, project estimation, preparation of instrument specification, comparison statement ,pr

18 years petrochemical experience, senior engineer

10 Year experience in FEED & Detail engineering of Electrical System in Oil & Gas, onshore Plat-form, Petrochemical Plant, Automobile sector and Pharmaceutical Industries

HSE Executive

Numerical Simulation (Eclipse/Petrel RE), Analytical tools(PROSPER/MBAL), Well testing, reserves estimation, material balance,decline curve analysis, production testing

10 yrs in safety management

Chemical Laboratory Analyst / Chemical Process Technician.

Experienced rig medic

PROJECT ENGINEER / ROTATING ENGINEER / ELECTRICAL ENGINEER

Quality Engineer

Seven years of Process/Project engineering experience encompassing process design, process safety management and regulatory compliance, Project scope development, Project scheduling, Project execution strategy. Areas of process design specialization include relief system design, equipment design.

Process Technician with 9+ years of experience

Process Engineer

Experience in developing PFD’s and P&ID’s to IFD and to IFC.Experience in line sizing, pump sizing, control valve sizing, relief valve sizing and vessel sizing. Experience in preparing LDT documents, Rev Lists. Proficiency in process design software like ASPEN PLUS,HYSYS, PRO II.

Trouble shooting of problems in various field instruments, DCS (Honeywell – TDC3000), I Have deep knowledge in Gas Turbine and Compressor related instrumentation systems

I have drilled over 100 wells, both explorational and development. I have directly planned and executed major drilling, recompletion, and completion programs. I have designed well logging programs. I have also participated in extensive reservoir characterization studies.

Experienced distribution center in-charge, materials planning and control handler, and warehouseman (total 14 years) and mechanical engineer in practice as power plant maintenance and engine tender. Computer literate, resourceful, constructive decision maker. Easily adapts to any working environment

Construction/Commissioning Instrumentation & Control Superintendent, or Project Management (PMC-role), or I & C Field Engineer/Supervisor, or I & C Maintenance Engineer

16 Years of Experience; Experience in managing the Quality control & Quality assurance activities for large integrated engineering projects. Exposure in vendor documents, correspondences with client, vendor, carrying on stage & final inspection with client. Exposure to International code

Planning & Scheduling by Primavera P3; Structural Design by STAAD-PRO 2004

From 2005 Clough Engineering & Integrated Solutions (CEIS) Pty Ltd

Structural draughtsman, working sice last 14 yeards, with 2 yrs. gulf experience,

Boiler Purchasing, erection, commissioning, startup, troubleshooting experience.

A well-rounded production person having worked at all levels from production operator through control room lead tech to supervisor. Trained in all aspects of the oil and gas industry (well heads, 3-phase separation, compression, reciprocation, turbine, centrifugal, refrigeration, gas lift, gas injec

Well verse in blasting and painting for the past 20 years

Sutina is the Country Knowledge Manager for Deloitte Consulting Malaysia. She has 5 years knowledge management experience in the professional services environment. At present, she works extensively with the firm's intranet, soliciting and managing content, establishing guidelines and processes.

8+ years of experience in the field of IT with experience mainly in Customized Enterprise Planning Solutions (ERP), Business Process Management (BPM) and Management Information Systems (MIS). Wide experience of System Analysis, Project Management and Client handling.

I have 30 years experience working in Oilsands Upgraders as a control room operator and start-up and commissioning operator. I am currently working on expansion and growth plans of Suncor for their MNU Project. I work with Engineering houses to include operations input for operability and safety in

Handling of ATF, Refuelling/Defuelling of aircraft.

Sales of Industrial products like Pumps,Mechanical Seals, Fluid Sealing Products

I'm a qualified Medical Graduate (MBBS) with almost 14 years of Clinical Work experience, mostly in the areas such as Emergency Medicine, Internal Medicine, Trauma, Tropical & Infectitious Diseases and Public Health.

25 years experience in IT industry, now specializing in J2EE, Service Oriented Architecture (SOA) and Radio Frequency ID (RFID) solution integration to Enterprise Information Systems (EIS). Willing to travel 100% worldwide.

Chemical Engineer with more than 20 years experience in construction, testing, precommissioning and commissioning of utility plants in Oil & Gas, Fertilizer and Petrochemical industries.

I'm a Science Graduate. B.Sc., from Andhra University, INDIA in 1985, Working as Comissioning Engineer With LURGI team since Sep-2007. well versed with Pre commissioning, commissioning, start up, Normal/ Emergency shutdown activities and performance test of PDH (Propane D ehydrogenation) Plant.

Has over 20 years experience in EPCM projects with extensive experience in purchasing, contract administration, cost estimating and production planning. Relevant manufacturing experience in pressure vessels, plate works.Language skills: English, French, Spanish, German, Portuguese.

Well rounded trainer/instructor/worker who is willing to be a part of a team whose primary goal is safe and effective work efforts. I am fully European standards trained airport/commercial property fire fighter and also multi skilled in various areas such as mechanics and repairs.

Over 20 years (5-1/2 years in India and 15 years in Gulf) of experience in the field of Pipelines in reputed Engineering Consultancy firms. Worked as a Lead Pipeline Engineer for various PDO (Oman) and Saudi Aramco Oil/Gas cross country pipelines and in-plant pipeline tie-in projects.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 [ 44 ] 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out