Resume - Seven years of Process/Project engineering experience encompassing process desig...

Misco Jobs

Resume #82432

CONTACT INFORMATION:
View contact information...

Employment History
CDI Business Solutions (Process & Industrial) Freeport, TX 77541
Process Engineer IV August 2005 - February 2009
Chemical, Refinery, Oil & Gas Process related project handling.
Perform conceptual process design basis and develop basic PFD and P&ID designs.
Perform heat and materail balance calculations.
Perform Hydraulic calculation and provide pump and piping specifications.
Size Process Equipments: Pumps, Exchanger, Relief Valve, Rupture Disk etc. using
API, ASME, DIERS, ASHRAE, and CCPS Codes and Standards.
Use Aspen Plus, Hysis, Sim SCI PRO II, Sinet 7.1 for different process design projects.
OSHA mandate relief system evaluation (PSM) with necessary mitigation.
Perform Vent header/Flare header evaluation and provide necessary sizing solutions.
Perform pressure drop calculations and pipe sizing.
De-bottlenecking study across control valves.
Write technical report based on requirement of each project for client.
Prepare initial proposal and scope of project.
Manage Plan and Schedule project tasks as per day to day requirement.
Co-ordinate with clients and peers to effectively meets the project deadlines.
Work on BASF In Tools for IFA and IFC inputs.

PROJECTS:
De-bottlenecking across the control valve (Control Valve & Line Pressure drop) (BASF)
Relief valve validation studies (Field check PSVs and calculate capacity to validate relief scenario) (BASF)
Relief valve sizing (Relief Valve and Rupture Disk Sizing for different Process Vessels) (FMC)
Butyl Acrylate crude and water separation based on Ph, Sizing settler, Pumps, sulfuric acid line sizing etc. (BASF)
Coker Flare Relocation Project (P&ID updates, Equipment Specs., Line Size) (Chevron)
Oily Water Sewage Project (Tank sizing, Pump Sizing, Vendor Quotes Evaluation) (FMC)
Catch Tank Replacement (API 650 Tank Sizing, Request and evaluate Vendor Quotes) (FMC)
Methanol Column Re-vamp (P&ID, PFD, Pumps & Exchanger Sizing, Line Sizing, PSVs, Control Valves ) (FMC)

A4 Scientific The Woodlands, TX 77380
Chemical Analyst June 2003 – July 2005
Operating, maintaining and troubleshooting GC/MS.
Methods development and implementation.
Technical review and data validation.
Project management for commercial clients.
Analyses using EPA- CLP (Contractor Laboratory Program): OLMO 4.3, OLCO 3.2 and SW 8260B protocols.

SchmArt Engineering, Inc. Beaumont, TX 77707
Relief Valve Analyst (Junior Engineer) March 2002 – June 2003
Analysis, evaluation and relief devices sizing for petrochemical companies and refineries.
Check OSHA, API and ASME compatibility of relief devices.
Evaluate Process & Instrumentation Diagram (P&ID) and Process Flow Diagram
(PFD).
Perform material balance and energy balance calculations for distillation columns and other pressure vessels.
Prepare complete documentation of relief valve analysis with all required information for client.
Validation for in-house developed software and preparation of training manual.

A-1 Titanium Baskets & Equipments Mumbai, India
Trainee Engineer (Entry Level Engineer) June 1999 – June 2000
Design and sizing of Pumps and process equipments.
PFD and P&ID evaluation and development.
Supervision of chemical equipment fabrication.

Recent Laboratories Thane, India
Trainee Engineer (Internship) August 1997 – December 1997
Product improvement and quality control.
Process equipment sizing using API, ASME, ASHRAE and CCPS Codes & Standards.
Batch reactor design and optimization.
Safety device evaluation based on guidelines provided by API, ASME and DIERS.
Process study and development.
Prepare operating and safety procedures.
Train technicians for implementation of new procedures and process changes.

Special Projects
Bhabha Atomic Research Center (BARC) Mumbai, India
Research work on Separation of Rare Earths by Solvent Extraction June 1998 – May 1999
Literature survey & selection of required solvents.
Material balance, energy balance of process.
Design and optimization of chemical equipments (Design of Mixer Settler for solvent Extraction, Scrubbing and Stripping) & cost estimation for some fixed amount production plant.

Lamar University Beaumont, TX
Project on a Neural Network Model that predicts the quality of air in & around Beaumont and Houston area.

Technical Skills
Able to handle 5-30 Kg batch operations.
Able to determine the plant's performance sizing equipment.
Reviewing batch performance and suggesting required changes.
Writing instructions for batch and continuous operation and assisting operators in technical difficulties.
Batch operation reactor and stirring equipment design.
Study heat requirement for optimum batch performance and suggesting changes.
Single batch product evaluation and purity check.
Familiar with Six Sigma, Lean Manufacturing and CGMP (Current Goods Manufacturing Practices).
Basic knowledge of HAZOP methodology.
Using existing knowledge base to troubleshoot.
Technology problem-solving and process optimization.
Understanding and hands on experience of scale up batch production.
Workable knowledge in OSHA, API, ASME, DIERS, ASHRAE and CCPS Codes &
Standards.
Good Understanding of PFD and P&ID diagram.
Profound knowledge of Thermodynamics, Heat Transfer and Mass Transfer operations in field of Process Industry.
Working knowledge of process equipment sizing and fluid dynamics evaluation for small and large engineeringprojects.
As a chemical Engineer well versed with environmental engineering topics like Air Pollution, Unit Operations in field of Environmental Industry, Waste Water Treatment.

Education
Lamar University Beaumont, TX
ME in Chemical Engineering (GPA 3.75) December 2001

University of Mumbai Mumbai (Previously Bombay), India
BE in Chemical Engineering May 1999

Computer Skills
Operating System Dos, Windows 95/98/2000/XP/Vista
Programming Languages Basic knowledge of C++, Java and Pascal
Database User level knowledge of SQL
Software MS Office 97/2000/2003 (MS Word, MS PowerPoint, MS Excel), MS Project
Engineering Software Aspen Plus, B-Jac, Sim SCI PRO II, Hysis, Sinet 7.1, FlareNET,
AutoCAD 14/2000, Pavilion Process Insight

Affiliations
Professional: American Institute of Chemical Engineer (AIChE).

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2151 to 2200 of 10884)

Go to Search Parameters...

Brief Description

HSE Executive

Numerical Simulation (Eclipse/Petrel RE), Analytical tools(PROSPER/MBAL), Well testing, reserves estimation, material balance,decline curve analysis, production testing

10 yrs in safety management

Chemical Laboratory Analyst / Chemical Process Technician.

Experienced rig medic

PROJECT ENGINEER / ROTATING ENGINEER / ELECTRICAL ENGINEER

Quality Engineer

Seven years of Process/Project engineering experience encompassing process design, process safety management and regulatory compliance, Project scope development, Project scheduling, Project execution strategy. Areas of process design specialization include relief system design, equipment design.

Process Technician with 9+ years of experience

Process Engineer

Experience in developing PFD’s and P&ID’s to IFD and to IFC.Experience in line sizing, pump sizing, control valve sizing, relief valve sizing and vessel sizing. Experience in preparing LDT documents, Rev Lists. Proficiency in process design software like ASPEN PLUS,HYSYS, PRO II.

Trouble shooting of problems in various field instruments, DCS (Honeywell – TDC3000), I Have deep knowledge in Gas Turbine and Compressor related instrumentation systems

I have drilled over 100 wells, both explorational and development. I have directly planned and executed major drilling, recompletion, and completion programs. I have designed well logging programs. I have also participated in extensive reservoir characterization studies.

Experienced distribution center in-charge, materials planning and control handler, and warehouseman (total 14 years) and mechanical engineer in practice as power plant maintenance and engine tender. Computer literate, resourceful, constructive decision maker. Easily adapts to any working environment

Construction/Commissioning Instrumentation & Control Superintendent, or Project Management (PMC-role), or I & C Field Engineer/Supervisor, or I & C Maintenance Engineer

16 Years of Experience; Experience in managing the Quality control & Quality assurance activities for large integrated engineering projects. Exposure in vendor documents, correspondences with client, vendor, carrying on stage & final inspection with client. Exposure to International code

Planning & Scheduling by Primavera P3; Structural Design by STAAD-PRO 2004

From 2005 Clough Engineering & Integrated Solutions (CEIS) Pty Ltd

Structural draughtsman, working sice last 14 yeards, with 2 yrs. gulf experience,

Boiler Purchasing, erection, commissioning, startup, troubleshooting experience.

A well-rounded production person having worked at all levels from production operator through control room lead tech to supervisor. Trained in all aspects of the oil and gas industry (well heads, 3-phase separation, compression, reciprocation, turbine, centrifugal, refrigeration, gas lift, gas injec

Well verse in blasting and painting for the past 20 years

Sutina is the Country Knowledge Manager for Deloitte Consulting Malaysia. She has 5 years knowledge management experience in the professional services environment. At present, she works extensively with the firm's intranet, soliciting and managing content, establishing guidelines and processes.

8+ years of experience in the field of IT with experience mainly in Customized Enterprise Planning Solutions (ERP), Business Process Management (BPM) and Management Information Systems (MIS). Wide experience of System Analysis, Project Management and Client handling.

I have 30 years experience working in Oilsands Upgraders as a control room operator and start-up and commissioning operator. I am currently working on expansion and growth plans of Suncor for their MNU Project. I work with Engineering houses to include operations input for operability and safety in

Handling of ATF, Refuelling/Defuelling of aircraft.

Sales of Industrial products like Pumps,Mechanical Seals, Fluid Sealing Products

I'm a qualified Medical Graduate (MBBS) with almost 14 years of Clinical Work experience, mostly in the areas such as Emergency Medicine, Internal Medicine, Trauma, Tropical & Infectitious Diseases and Public Health.

25 years experience in IT industry, now specializing in J2EE, Service Oriented Architecture (SOA) and Radio Frequency ID (RFID) solution integration to Enterprise Information Systems (EIS). Willing to travel 100% worldwide.

Chemical Engineer with more than 20 years experience in construction, testing, precommissioning and commissioning of utility plants in Oil & Gas, Fertilizer and Petrochemical industries.

I'm a Science Graduate. B.Sc., from Andhra University, INDIA in 1985, Working as Comissioning Engineer With LURGI team since Sep-2007. well versed with Pre commissioning, commissioning, start up, Normal/ Emergency shutdown activities and performance test of PDH (Propane D ehydrogenation) Plant.

Has over 20 years experience in EPCM projects with extensive experience in purchasing, contract administration, cost estimating and production planning. Relevant manufacturing experience in pressure vessels, plate works.Language skills: English, French, Spanish, German, Portuguese.

Well rounded trainer/instructor/worker who is willing to be a part of a team whose primary goal is safe and effective work efforts. I am fully European standards trained airport/commercial property fire fighter and also multi skilled in various areas such as mechanics and repairs.

Over 20 years (5-1/2 years in India and 15 years in Gulf) of experience in the field of Pipelines in reputed Engineering Consultancy firms. Worked as a Lead Pipeline Engineer for various PDO (Oman) and Saudi Aramco Oil/Gas cross country pipelines and in-plant pipeline tie-in projects.

Over 20 years of diversified experience in Quality system Management, Environmental Management Project Management, Contract Management, Customer Satisfaction Management (CSM), Customer Relation Management (CRM), Contract and Scope Calibration, Technical and legal evaluation, Contract Regulation Mana

Metallurgical/Materials Engineering, failure analysis of gas turbines components, remaining life assessment, gamma prime growth morphology in nickel-base superalloys, high temperature coating degradation and failure mechanism, creep behavior of the alloy, fatigue crack initiation and growth

Corrosion control, cathodic protection

Electrical and electronics engineer with 24 year experience in a major fertilizer, chemical and petrochemical industry. Also have a strong back ground in communication field

DUTIES: Overseas experience in East Africa -Mozambique and various remote locations in Australia on OD&E Double ,Tripple and Work Rigs (Ideco H-725,Cardwell KB 700,Kremco K-600,Ideco 1200ED-SCR,National 610E-SCR,Franks Cabot 300) encompasing all standard and preventative mechanical maintenance on al

Over 16 years of experience working as a Process Engineer including 5 years as Lead Engineer supervising/coordinating engineering design teams in multidiscipline engineering companies. Has executed Conceptual Design, Front End Design and Detailed Design projects in Oil and Gas, Refineriese etc.

Materials Management, Logistics & Supply Chain Management, Stores & Inventory Control, Warehousing & Distribution, Coordinator.

Qualifications: BSC Electrical Engineering, Corporate member of the Institute of Electrical and Electronic Incorporate Engineers,

More than 20 years of professional experience in engineering design, construction and project management. Familiar with international standard including Saudi Aramco Engineering Stds. & design practice. Well verse in engineering software for electrical power system design analysis.

Industry and project experience in developing, analyzing, training and implementing simulation and advanced process control for refinery, chemical, and petrochemical operations.

17 years of experience in all phases of plant operations, production, trainning, environmental

A Senior / Chief Estimator level experienced in Oil & Gas, Mining, Power plants, Manufacturing. Representing Owner, EPC and EPCM companies, Over 25 Years.

Drilling Manager/Superintendent/Engineer with 14 years of international experience.

Project Management; General Management; Commercial Management; Project Director; Oil & Gas, Petrochemical; International; EPC/EPCM, Construction, Contracting, Joint Ventures; 30 years experience; Successful track record; Flexible and adaptable.

Operations Manager/Field Engineer - Borehole Seismic

Experience in project management, design, front end engineering, installation, testing and commissioning.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 [ 44 ] 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out