Resume - Working in the North Sea in UK, Norwegian and Dutch sectors. Projects for Seafox...

Misco Jobs

Resume #82542

CONTACT INFORMATION:
View contact information...

Work experience
Troms Offshore- from June 2008 as 2nd Officer/DPO on
PSV m/v Sical Torino Congsber SDP 21, working in the North Sea in UK, Norwegian and Dutch sectors. Projects for Seafox 4,Sean P, Clipper, Britania,Transocean Leader, Transocean Winner, Deepsea Delta, Njord A, Troll A B C, Ocean Vanguard.

Fugro Marine Services-from January 2008 as Chief Officer/DPO on survey vessel Fugro Mercator Congsberg SDP 11, Hazard Surveys, High Resolution Site Surveys, Mineral Surveys Tow Route, Surveys Cable Route Surveys Pipeline Route Surveys Pipeline Inspection Surveys Swathe, Bathymetry Surveys(1000m)ROV Inspection Surveys
CPT and Vibro Coring Surveys, Shipwreck and Air Accident Survey.

MMS- BGP Geoexplorer from August 2006 taking part in converting fishing vessel to 3-D seismic vessel as Chief Officer at STM Shipyard-Singapore. On site as Project Engineer's assistant for marine and safety part. Leaving shipyard on March 2007 and employed on BGP Pioneer as Chief Officer. Performing internal audits on board, training and familiarizing new crew with Company ISM. Implementing Company SMS system and HSE procedures.
Working on Bridging BGP Geoexplorer's and Maritime Management Service's documents. Implementing Hazard Management JSA and Emergency procedures. Preparing vessel for external audit. Taking care of Helideck certification process. Responsible for Marine Purchasing system.

Workships Contractors BV & Petrobras from 02.2006
Chief Officer
Working offshore Brazil on Platform Support Vessel "Scan Carrier''.
Responsible for supervising of marine deck activities, general stability and registration of all deck loads, cargo securing and stowage plan. Supervising all safety procedures and requirements accordingly to Company's ISM code. Act as onboard Safety Officer. Vessel shared with two drilling rigs. Operating with installed CleanCut system on board. Collecting and transporting rig's cuttings. Refueling, supplying drill water and various type of rig's equipment, performing basket personnel transfers. Operating at the rig on joystick.
Ship's DP not certified.

Barber Ship Management & PGS 2002-2005,
First Officer
I have recently almost 3 years working offshore Malaysia, Indonesia, India, Ghana, Madagascar and Nigeria in a very challenging role, in a Very challenging working environment.
I was involved and have been partly responsible for safe navigating of the vessel, transfer of personnel and cargos using small boats undershoot, close approaches and multi boat operations, coordinating multi chase boats operations. Up to 12 chase boats in the field.
I have been responsible for the co-ordination of helicopter flight program for the vessel in the field. This involved the movement of up to 90 people from shore to the vessel and to the shore. I was responsible for safety of the helicopters whilst airborne and the initialization of emergency response procedures in the event of an emergency involving a helicopter.
The upkeep of a flight log, POB list, ships log etc was also my responsibility.
Day to day communication to and from the vessel was also my responsibility and included VHF, UHF & HF radio, microwave and satellite systems and air band radio I had an emergency communications role onboard the ships Emergency Co-ordination Center in the event of an on board emergency.

Barber Ship Management & CGG 2001-2002
Second Officer
Working offshore USA, North Sea. Duties as for Barber Ship Management & PGS. I was involved in seismic operations, towing, recovering, deploying streamers, and replacing seismic gear with workboat, streamer maintenance, replacing sections. I was also involved in at sea refueling (bow refueling).

Athol Shipping 2000-2001
Second Officer
Passenger vessel operating worldwide. I was responsible for the safety of passengers, supervising and coordinating co-operation of all departments in port while on duty. Entertaining passengers during their stay on board, familiarizing passengers with the ship, upkeep of the accidents and injures log.

Green Refers 1997-2000
Second Officer
I took part in transporting frozen goods from Europe to USA and back. I was partly responsible for loading, stowing and discharging cargo, supervising temperatures of the cargo.

Education and training

1983-1988 Maritime Technical Collage
1988-1999 Army Service
1999-2000 Naval Academy
1990-1994 Graduated Maritime Academy Szczecin, Engineer Degree,

Chief Mate License with STCW 78/95 Convention, Bahamian Endorsement, Offshore Operators Certificate of Competence (CAA UK), Advanced DP Course, Basic Offshore Safety Induction end Emergency, Under Water Escape Training, Basic Safety end Emergency Preparedness, GMDSS Certificate, Certificate of Training in Using and Utilizing the Automatic Radar Plotting Aid, Certificate of Radar Observation and Plotting Course, Certificate of Proficiency in Survival Craft and Rescue Boats,, Certificate of Basic Safety Training in Personal Survival Techniques,, Certificate of Training in Advanced Fire Fighting,, Certificate of Basic Safety Training in Personal Safety and Social Responsibility, Certificate of Training in Medical First Aid, Certificate of Basic Safety Training Elementary First Aid, Fast Rescue Craft Cer.

Mother tongue Polish
Other languages English
Reading skills good
Writing skills good
Verbal skills good

Technical skills and competences
* Operating and maintenance of communications systems including GMDSS equipment, DSC units, HF, MF, VHF and UHF radio and associated antennae, INMARSAT satellite system, telex facsimile etc,
* Operating and maintenance of Electronic Charts, Electronic Position Indicating systems, Integrated Bridge system, AIS system, Fire Detection and Alarm systems,
* Strong logistical planning and organizational skills with computer literacy,
* IT skills in both hardware and software. Microsoft Windows and Office Products skills from DOS to Windows,
* Good interpersonal skills, able to deal equally well with personnel of all kinds of nationalities in positions from unskilled labour to senior management.

Driving licence(s) A+B

documents Passport valid till 05.2011, Seamen's Book, vaccinations book.

HOBBIES Windsurfing, handball, computers.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1101 to 1150 of 10917)

Go to Search Parameters...

Brief Description

Over 20 years experience in the petrochemical and industrial gas maintenance, capital projects and construction field. Specializing in the repair and alignment of mechanical rotating equipment, pumps, compressors, turbines, valves, process piping and tubing. Management, scheduling and planning of w

Senior Piping Designer

25+ years experience in piping design of power plant,refinery, and chemical plant exoeriences. Field experience included.

I am presently the Subsea Toolpool manager for a major Oil operator's Subsea Wells dept operating in Angola.This work is combined with an ROV interface engineering workscope.

Diesel mechanic and maintenance on all generators, trucks, cats and vehicles. I also know welding and boat engines( inbord and outbord).

QA/QC NDT and RT Interpreter Coordinator 5 Years QA/QC Welding and Fabricating Inspector Lev 2 8 Years Welding Instructor /Team Leader 3 Years Supervisor/ Superintendent / Piping-Mechanical-Structural 7 years

Electrical Design, Drafting, Construction and Procurement

Autocad, microstation, frameworks 2-d and 3-d cad structural designer

Quantity Surveyor - Estimator for Oil and Gas, Petrochemical, Hydro Power Plant, Fabrication Shop, 24 yrs. exp.

Experience 2D, 3D, and 4D land seismic surveys. Vibroseis, dynamite and airguns. Terrain derest, bush, swamp, transition, heliportable and urban

Anhydrous Ammonia production for 30 years

Over 22 years in Plant Operation in round the clock shift duties.

Oil Industry 37 years, Regulatory, Environmental, Safety 28 years,

Worked in Irak, and Afghanistan , still have valid Work Permit and visa for Afghanistan, Gen technician

Sr.PDS/PDMS Piping Design Engineer/Designer / PDS Administrator /Lead piping Engineer/Designer.

A Mechanical Engineer with 20 + years of experience in O&M of large Diesel engines and various machineries in power plant and marine industry

Senior Executive with more than twenty years of experience, many of them abroad.

Project / Engineering of facilities for the domestic and international oil and gas industry with emphasis on Structural and Foundation Engineering. Strong knowledge of processing, and construction of platforms, pipelines, platform drilling /workover rigs, etc.

Offshore Oil & Gas Paramedic

Fifteen years of experience in Refinery, Oil & Gas and Petrochemicals field as a Piping designer in producing plot plans, Equipment Layout, Piping General Arrangement Dwgs, Piping isometrics, Jacketed piping isometrics, M.T.O., Stress isometrics, Sketches, Nozzle orientation and as-built Drawing on

Servicing oil and gas wells; running/pulling tools ,well clean outs using nitrogen

chemical engineer in pakistan steel mills

I am an IRCA (UK) Registered QMS 2000 Lead Auditor, currently working QA/QC Manager with an EPC Company for Yemen LNG Project, Balhaf site, Yemen.

Operation Management for FPSO / FSO

Petroleum Engineer with extensive experience in Drilling, Operations, Drilling Management. Trained in: Offshore, Onshore, Inland-waters. HTHP wells, Gas wells, Horizontal drilling.

Engineering professional with 17+ years of experience within diverse oil, gas field, refinery and petrochemical industrial arenas. Expert level engineer for instrumentation and control disciplines.

Reliability / Maintenance / Rotating Equipment Engineer with 20+ years of experience in Oil / Gas / Petrochemical / Utility industries.

Experience with handling database and managing data. Very familiar with writing database queries in SQL, as well as developing database scriptings. Industry expert in data quality.

Over 13 years of solid experience in piping stress/pds design for Refineries,petrochemicals,fpso&power projects.

To present my background and what I can do in the company with my skills.

Saudi Aramco Approved Vendor Inspector SAP No. 70004827, Certified API-510, Cswip 3.1, NDT Level2, ISO 9001.

13 years oil industry experience,• Drill wells up to 6500 mt, High temperature gas wells, drilling of horizontal multi-lateral hole, sidetracks, H2S Environment,Run 5 1/2" expandable liner & Run 4 1/2" completion assy., with 4 1/2" liner cemented off bottom

Sales Professional

Analytical, communication, result oriented, and learning for development

Experienced Operational personell in the field of oil and gas / petrochemical with commissioning experience

Geophysicist with over 12 years experience in various aspects of geophysical works. Proven solid experience in: 2D/3D seismic interpretation, Velocity Modeling, Acoustic/Elastic Inversion, AVO/AFI analysis,Seismic Inversion

Designation project supervisor in higher risk environment

Mechanical engineer graduated in 1991 from Damascus university (machinery department)since that date (15 years experience in oil and gas industry in onshore and offshore)I have been in several companies(SPC,SCOT,Alfurat petroleum co with SHELL in their gas plant.

20 years experience in process and laboratory analyzers in refinery and Petrochemicals operations world wide. Graduate degree in analytical chemistry. Willing to relocate.

Sr. Civil Structural Designer

Working as Well Site Geologist for Oil Field Instrumentation, India. Our client is MEDCO international an Indonesian company. Presently I am working in Oman. I have worked in the following fields of Oman: Simsim, Warad, Basma and Irad.

PANEL AND FIELD OPERATION

CAREER SUMMARY : Vast experience in the field of industrial piping, i.e. petrochemicals, fertilizer, synthetic fiber, refinery, polyester and pharmaceuticals industries. Main responsibilities includes - model review, piping designing, supports, drawings checking, site survey and coordination.

I have worked in the Oil & Gas industry for over 20 years

HSE Manager with international experience. Nebosh certificate.

My career objectives, strengths and experience in the workforce I am a skilled, experienced and respected heavy equipment mechanic with substantial experience onshore & offshore Australia and overseas particularly here in Asia.

Experience in Supply and Demand Planning, Customer Service, Logistics and Purchasing

Drilling Supervisor / Drilling Foreman / Comapany Man/ Drilling Engineer

Working in the North Sea in UK, Norwegian and Dutch sectors. Projects for Seafox 4,Sean P, Clipper, Britania,Transocean Leader, Transocean Winner, Deepsea Delta, Njord A, Troll A B C, Ocean Vanguard

Client Representative QC navaigation,

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 [ 23 ] 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out