Resume - A highly motivated professional with 10+ years of diverse hands-on experience in...

Misco Jobs

Resume #82767

CONTACT INFORMATION:
View contact information...

I am a process engineer, and have 10+ years of experience in process systems design, process engineering support, basic and detailed engineering of the petrochemical, oil processing facilities including open pit extraction/tailing and steam assisted gravity drainage technologies (Upstream production of heavy oil), and hands-on experience of optimization and debottlenecking of existing facilities including bitumen processing from oil sands facilities.
* Conducted projects for preliminary design, engineering design specifications, commissioning, startup and plant operations of the processing facilities
* Prepared HYSYS simulation models for basic engineering and performance optimization of condensate production projects
* Developed PFD's and P&ID's for different phases of projects of process plants and prepared functional descriptions, control philosophies, startup and standard operating procedures write- ups.
* Experienced in the development of PFDs and P& ID diagrams
* Adept in use of HYSYS, AFT Fathom and ARROW for hydraulics of compressible and incompressible fluids, FARRIS software for PSV sizing, Fisher for sizing of control valves, flow meters & PSVs and prepared API spreadsheets for PSV sizing.
* Involved in the preparation of design base memorandum (DBM) and detailed engineering design specification (EDS)
* Performed equipment sizing, pressure drop and hydraulic calculations, PSV and control valve sizing, selection of pumps and prepared equipment & instrument data sheets
* Performed hydraulic calculation of plant piping for liquid, gas and two phase systems, sizing and selection of equipment including separators and pressure vessels, air coolers, pumps, compressors, and flare and relief systems
* Coordinated various bid clarification meetings (BCM) with different vendors
* Well versed in international engineering practices and codes, ASME, ANSI, NFPA & API
* Supervised major shutdowns and handled justification, design, specification, and implementation of the projects within areas of responsibility
* Supervised the preparation and evaluation of plot plans, engineering drawings and technical documents issued for IDCs, and the integration of other engineering discipline data inputs
* Supervised a group of 16 personnel for process plant commissioning, troubleshooting, and developed commissioning and operation manuals for junior engineers and plant operators
* Carried out heat and material balances of IGCC (Integrated Gasification Combined Cycle) units and improved the efficiency by heat exchangers retrofitting, using Pro-II software
* Carried out various studies to optimize Polymer Production plant performance/ operation
* Carried out studies on debottelnecking for the expansion of utilities units
* Good background in computer applications, such as Fortran, HYSYS, MS Word/Excel,
EDUCATION

MASc Chemical Engineering, Chalmers University of Technology (Sweden) and Dalhousie University (Halifax, NS, Canada) 2002 Conducted life cycle assessment (LCA) for different projects in Master Degree program.
Program entitled as "Environmentally Sustainable Process Technology"

B.Sc Chemical Engineering, Punjab University, Pakistan 1997
Professional Membership
Professional Engineer (APEGGA)
Publications

* "Review of Separation of Gases by Membrane Systems" Journal of Petroleum Science and Technology, 2004
* Paper has been submitted to the Journal of Energy Sources on ground water modeling,
PROFESSIONAL EXPERIENCE

Process Engineer - IMV Projects, Calgary, AB, Canada Feb 07 – Nov 07
(EnCana Project)
* Worked on ESP (Electric Submersible Pump) Conversion from gas lift operation.
* Identified the tie-in points and performed calculations for new lines for the conversion to take place.
* Developed P&IDs and performed equipment sizing of the SAGD (Steam Assisted Gravity Drainage) well pads.
* Issued different design change and field change notices at different phases of the project.
(Christina Lake off sites EnCana Project)
* Worked on debottlenecking of Christina Lake heavy oil processing plant (20,000 b/d).
Equipment Sizing, preparation of P&IDs, preparation of line designation tables, and coordination of HAZOP meetings was among the responsibilities.
Designed the blanket gas system for various tanks on the facility.

Process Engineer - AMEC Americas, Calgary, AB, Canada Sep 05 – Feb 07

Worked on Albian Oil Sands Project, Upstream Expansion. (Utilities Area)
This facility was an expansion project of extra heavy oil production of capacity 90000 bbl/d, from 8000 t/h oil sands ore processing.
* Worked on FED3 phase of the project and prepared the deliverables for that phase i.e. PFDs, P&IDs, design criteria, Sized the Equipment for the budget preparation of the FED3 phase.
* Worked on tie-in points for the utilities to be taken from MRM Base plant to the new facility and sized the equipment/line to implement the debottlenecking.
* Designed the firewater system for the new facility including the debottlenecking of the existing system..
* Worked on the detailed design of the project, main responsibilities included performing calculations to size the equipment/Line using simulation softwares (Fathom, Arrow and HYSYS) along with the hand calculations.
* Review of vendor quotes/data for boiler feed water, potable water and wastewater treatment units and preparation of design reports for client review were among the duties
* Provided support to other departments (i.e. mechanical, procurement) and coordinated with other process areas (i.e. froth treatment, extraction and tailings)

Process Engineer- Associated Engineering, Calgary, AB, Canada Dec 03 – Sep 05

* Prepared P& IDs, general arrangement drawings of equipment, Equipment/Piping layouts of pretreatment unit for Bearspaw water treatment plant of City of Calgary (600 ML/day)
* Selected and sized the equipment for aforesaid plant
* Prepared pre-design report of the project
* Worked on the detailed design of the project

Project Engineer - Britex Canada, Bridgetown, NS, Canada. Aug 02 – Aug 03

* Improved the elastic fiber manufacturing process making it environmentally more sustainable (different P2 projects in collaboration with NRC- IRAP). As a result, Britex passed twelve monthly LC 50 tests in a row.
* Evaluated different treatment technologies based on influent treatability and economics.
* Prepared proposal for NSDOEL for the issuance of WWT class II facility license.
* Worked on equipment sizing and selection as a project engineer and monitored installation of wastewater treatment plant at the facility.

Visiting Scholar - Dalhousie University, Halifax, NS, Canada. Nov 01 – Aug 02

* Performed research in the area of natural gas sweetening, investigating new materials
* Computer simulated design and optimization of methane purification for limestone adsorption process
* Simulated the contaminant transport in carbonate formations in the presence of fractures with numerical and experimental modeling (ground water modeling for master thesis project)
Process Engineer - DSF Polymer Plant, Haripur, Pakistan. Dec 97 – Sep 00

* Developed PFDs P&IDs and block flow diagrams for utilities required at the facility (steam, chilled water, compressed air etc.)
* Involved in calculating preliminary hydraulics and sizing of the equipment of the facility
* Contacted and negotiated with process licensor (Noyvalesina, Italy) in design review meetings and technology assistance
* Responsible for providing technical support to Engineering and Construction departments of the contractor (Habib Rafiq) at the erection & commissioning stages of the plant.
* Responsible for providing technical support to Operations Department in planning shutdowns/ startups, Inline Inspections, equipment performance testing and other unusual operations
* Communicated with and presented technical information to Plant Operators and Project Managers
* Worked on the technology selection and monitored the installation of wastewater treatment plant at the facility. Responsible to provide technical support to the wastewater treatment plant operators

CITIZENSHIP: CANADIAN

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1301 to 1350 of 10816)

Go to Search Parameters...

Brief Description

Petroleum Engineer with over 30 years of experince in oil and gas fields operation and maintnanace, including design and construction of surface facilites(Pipeline)

QA/QC ENGINEER

An experience individual with excellent knowledge of Sales/Marketing, Freight handling, Imports/ Exports Management with the objective of achieving organizational goals and making it a strong profit center seeks an opportunity in managerial capacity

I offer a broad range of upstream petroleum business skills and leadership experience covering exploration/development planning and LNG project execution, subsurface and production facilities planning, economic analysis, strategic planning, commercial/legal negotiations and corporate communications.

Senior Project Manager, International Industrial Multi-Disciplinary &Muli-Cultural Projects

Negotiations, planning, economics in international joint venture gas and midstream projects for past 14+ years. Started career as reservoir engineer with Exxon.

Trade and degree qualified welding engineer and m,etallurgist with 25+ years experience in petrochem, power, onshore rig contruction and computerised welding documentation management.

Analytical chemist in the fields of oil & gas, petrochemical, fertilizers, pesticides and pharmaceuticals.

Technical / Lead Safety Engineer

NDT inspector LVL II

11 years experience in offshore construction, field engineering, planning, offshore and onshore project scheduling, field supervision for installation of offshore platforms pipelines spools, pigging and hydrotesting. Preparation of installation procedures, rigging calculations, material procurement

With 12 years in the Oil Field Industry, working in Brasil as well as other countries such as, Colombia, and USA. I became proficient and experienced in Completions, such as Sand Control (Gravel Pack, Frac Pack, High Water Pack, Horizontal Gravel Pack) Upper Completion (single/dual string), Expandab

Network and security Engineer

HR Officer, Recruitment and Administration, Hiring Officer, Hiring Consultant, Marketing

Degree in Petroleum and Natural Gas Engineering. New Mexico Institute of Mining & Technology (NMT), Socorro NM.

Core business is scaffolding; Consulting, controlling, supports, execution business. in Oil & Gas industry and construction industry

Nearly 15 Years QA/QC composite Experince in Electrical Manufacturing as well as Construction of Oil & Gas Central Processing Platform

ASQ Certified Quality Technician with over 8 years Experience in the development and implementation of Quality plans and manufacturing procedures used in the Petroleum and natural industries for Rotary drilling equipments. Regulatory compliance, QA/QC, NDE, Material testing and Inspection

Human resources

A highly motivated professional with 10+ years of diverse hands-on experience in conceptual process design, technical services and developing/upgrading of upstream oil processing facilities. Worked on petrochemical projects, oil sands technologies and water/wastewater treatment plants from front end

Piping Designer with 12+ years of experience in piping design & detail engineering involving Equipment layouts, Piping layouts, Piping isometrics, Tie-in Schedule and Pipe supports for Onshore & Offshore Oil & Gas, Power and Petrochemical Plants. Have good knowledge of all national & international c

A senior logistics specialist - currently pursuing MBA - with 9+ years of track record in administration, logistics, contract and fleet management with cross competencies in MIS report analysis. Seeking a challenging position with a dynamic organization to apply accrued expertise in achieving tangib

Seeking suitable opportunities in the field of CP including offshore and onshore -industries, oil companies, contracting companies and power sectors, to harness my technical skills & acquired knowledge- to it's best, so as to bring out the best in me and thus to attain the highest degree of progress

Current Position as Air Separation Unit Technical and Process Specialist for Petronas Gas Berhad with previous experience with Air Products Chemical Incorporated and Messer Griesham. Some college from Texas Tech University, Lubbock, Texas USA.

Process Engineer Resume Oil and gas

Heavy Equipment Mechanic Journeyman including Redseal certification. Ten years experience on machines and equipment such as coaches, trucks, trailers, lifts, and others. Also knowledgeable in areas such as A/C, Electrical, Hydraulics, and Air Systems.

Piping Field Engineer – Technical Office

I have generated prospects in several basins. I am a proven oil finder and a team player.

14 years experience in welding technology ,Have extensive experience in welding(SMAW ,GMAW,FCAW ,SAW,TIG etc) of CS ,Alloy Steel ,C-Mn steel , and SS , DUPLEX STAINLESS STEEL , CU ¡VNI , NI ALLOY AND OTHER CORROSION RESISTANCE MATERIAL

Bachelor of Commerce, Budgetary Control, Inventory Control, Planning & Analization of materials, setting up new storage system, Vendor development, Administration skills.

PETROLEUM ENGINEER WITH 11 YEARS OF INTERNATIONAL EXPERIENCE

An experienced superintendent with the necessary skills required for the safe commissioning and operation of oil and gas treatment plant

I've been self employed since 1994 as a baker selling fresh baked goods to people restricted to a gluten free diet. Not only have I been the chief baker, I started the business, do all the office work, do all the marketing, maintain the website, etc.

Over 14 years work experience in various fields i.e. IT/MIS/Help Desk, Storekeeping, Banking and Finance, Clerical and Production

Finance Manager, Qualified Accountant

20 years Experience in the Acquisition of Oil and Gas Leases, Title Examination, Title Curative and Management of Small, Medium or Large Scale Projects within the Rocky Mountain Region

Level 2 UT EN473, RSO, Previous Level III PT,MT,RT. Advanced inspection in Phased Array and TOFD - Good computer skills

I am seeking a long term employment contract within a company as Rigger.

Experienced Coal Geologist and Oil & Gas Development Geologist, results-oriented, very strong mappiing, modelling, drilling program design and oversight.

civil/structural engineer/manager

Petroleum geologist, and specialized in a diversified spectrum of upstream petroleum activities. He also has a long and excellent employment record in both petroleum business and management.

Master Mariner with experience of LPG/C and LNG/C

B.Sc. in Geology, M. Sc. Geophysics Working as Co-coordinator & D. Geophysical Manager

Petroleum/Oil/Gas - Economics and Technical Management - Chem Eng - 30 yrs exp.

19 years Project/Turnaround Planning, 2 years in EP Maintenance Planning experience in O&G offshore & onshore; at senior capacity. Well versed in Planning software e.g. MS Project, Artemis & working knowledge of Primevera. Excellent in MS Office tools & MS Access.

I have worked in the Oilfield for over 16 years. Where by I have gained valuable experience in all down hole tool applications as quoted below. I have managed bases in different countries, and trained people from all walks of life. I enjoy my profession.

Chemical Engineer with Professional skills in Sea Water Desalination, Drink Water Production, Waste Water Treatment, Steam Production, Nitrogen Gas Production, Sulphuric Acid Production, Electrolysis – NaOH, Cl2, HCl Production

Skill gained over eighteen (18) years of experience on all aspects of Rotating Machinery and static equipment for onshore and offshore applications including specification and selection, contract technical evaluation, execution of modification and minor changes, design approval, witness testing, ins

Treasury professional with 20 years experience working for three Fortune 500 companies.

Position leading to a career in Environmental Management/Planning with an International Oil Company or a recognized International Consulting Firm.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 [ 27 ] 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out