Resume - A seasoned completion/well intervention/well test professional with 18 years of ...

Misco Jobs

Resume #82832

CONTACT INFORMATION:
View contact information...

OBJECTIVE
Looking for a rewarding and challenging opportunity as a Completions / Well Intervention/Well Test consultant where I can contribute from my wealth of experience.

PERSONAL PROFILE
* 19 years of experience with the following expertise:
* Sand control in deviated and horizontal well (fracpack, expandable sand screen, stand alone screen...)
* Intelligent/Smart well/Selective and Non-selective completions.
* HP-HT/MP-MT well completions, Monobore completions, ERD Completions, etc.
* Materials selection for "Sweet gas" and "Sour gas" completions.
* Stimulation of both "sandstone" and "carbonate" reservoirs.

* Adequate exposure to different well completion/intervention/sand control/well testing operations environment including land, offshore and deepwater offshore.

* Innovative production technology input into reservoir development opportunities, which includes promoting and evaluating the use of new technology to maximize well productivity and ultimate recovery, such as:
* Concentric Alternate Path System (CAPS) - for frac-packs completions in long intervals and high angle perforations.
* Distributed Temperature System (DTS), Pressure Temperature gauges and Interval Control Valves (ICVs) - for SMART and intelligent Completions.
* Formation Isolation Valves - for horizontal completions.
* Expandable Sand Screen (ESS) completions - for horizontal completions..
* Annular barrier tools (ABT) e.g. Swell Packers - for horizontal completions.
* Intervention-less technologies e.g. HHC packer, TTFV, Mirage plug, etc - for very deep and extra-long ERD wells.
* Double-Trigger perforation technology - for extra-long ERD wells.
* Tubular with special metallurgies and special elastomers for packers, nipples, safety valves, etc - for highly contaminated wells, HPHT wells, etc.
* Well bore Assurance through innovative casing cleaning solution.

* Remarkable Project Management Experience

* Remarkable experience in highly contaminated gas completions and well intervention: (H2S >40%; CO2 >6%)

* Proficient in the use of Petroleum Engineering software: Wellcat, Wellplan, Stimplan, SPAN, IPM suite (Prosper, MBAL, GAP), etc.

* Adequate exposure to coiled tubing, well testing -DST, slick-line, perforating and logging operations.

* Artic (temperate) climate and tropical climate experiences.

* A highly motivated individual who thrives well in a multi-discipline and multi-cultural environment.
* An excellent team player with strong stewardship and interpersonal solving skills.

* Functionally bilingual in English and French.

CAREER HISTORY

Completions & Well Testing Consultant, Deepwater Exploration Asset Aug 2008 - Feb 2009
BG Nigeria Lagos, Nigeria
Responsible for "Well Completion and Testing" operations in deepwater exploration campaign as follows:
* Designed sandface completion for BG Nigerian exploration assets.
* Selected and verified tools and equipment for casing and riser cleaning, TCP, gravel pack - HRWP/frac pack, DST, bottom hole sampling, PLT, surface well testing…
* Developed QCP and performed QA/QC on selected vendor's equipment.
* Conducted various completion engineering design using Wellcat, Wellplan, SPAN, etc
* Reviewed and evaluated Technical and Commercial Tenders from vendors for: Sand Control and Stimulation package, Casing/Riser (Wellbore) cleaning, etc.
* Conducted Test Well on Paper (TWOP) exercise including HAZOP reviews.
* Wrote completion and testing program.
* Supervised equipment preparation onshore.
* Conducted rig survey offshore with different completions & well test vendors for the preparation of completion and testing activities offshore. Addressed and corrected "Operations show-stoppers".

Staff Completions & Well Intervention Engineer, FootHills Asset Sept 2007 - Aug 2008
Shell Canada Calgary, Canada
Provided Completion and Well intervention engineering and operations support to the Canadian Foothills highly contaminated gas wells (>400,000ppm H2S; >6% CO2) operations:
Operations include: Work-over, surface casing vent flow and gas migration intervention, well abandonment, re-perforations, acid frac stimulation and well clean-up/flaring, etc.

Senior Deepwater Completions Engineer, Moho-Bilondo Project Aug 2006 - Aug 2007
TOTAL E&P Pointe-Noire, Congo
Responsible for the "Reservoir Wellbore Interface" technical solutions to modern sandface completion practices for 14 subsea wells in water depth ranging from 550 to 750m:
* Installation of expandable sand screen in water injectors,
* Frac-packs completions in oil producers with long intervals and high angle perforations,
* Stand-alone screens in sub-horizontal/and horizontal oil producers, etc.
* Sand control designs
* Pre-installation preparations
* Management of the sand control contract with budget in excess of $30 million.

Senior Well Completions Engineer Jan 2005 - Aug 2006
TOTAL E&P Pointe-Noire, Congo
Provided engineering and operations support to different assets with special peculiarities such as challenging procurement in remote location, sweet and sour gas fields, carbonate and sandstone reservoirs, activations using electric submersible pumps and gas lift, etc.
* Led an "Intelligent Completion" deployment project and successfully delivered three (3) pilot oil wells equipped with fibre optics Distributed Temperature System (DTS) and multiple pressure/temperature gauges. Fibre Optics procurement and installation cost of about $2 Million (US) for the 3-wells.
* Significantly improved wellbore assurance through efficient and effective casing cleaning.
* Sought and successfully applied new technologies for the completion of N'Kossa Extended Reach Departure (ERD) wells (up to 9000m measured depth).
Other responsibilities:
Congolese Deepwater Exploration Sand Control Experience: AUNM Exploration wells: Frac-pack and HRWP in deepwater (up to 2000m of water depth) environment.

Lead Completions Engineer, Amenam-Kpono Project 2001 - 2005
TOTAL E&P Port-Harcourt, Nigeria
This MP-MT field development involved the drilling and completion of 34 wells, of which 18 are oil producers, 5 are gas injectors and 11 are water injectors. It was accomplished using 2 Jack-up rigs simultaneously.
* Effectively led Amenam-Kpono Medium Pressure Medium Temperature (MP-MT) well completion project from inception to production. Demonstrated expertise in the design of Monobore completions and the applications of interventionless technologies to horizontal gas injectors saving $12 Million (US).
* Authored and released a "know-how" document on Amenam-Kpono well completions.
* Authored and released SPE paper # 90760 on Amenam-Kpono well completions.
* Achieved excellent project management skills working in Amenam-Kpono multi-discipline and multi-cultural team with budgets in excess of US$ 1.5 billion.
* Amended (with the sub-surface team members), the Amenam-Kpono field depletion plans following the results of the "interference tests" conducted in the early development phase of the project.
* Sought and implemented novel technology applications (TTFV, HHC packer, swell packer, FSO valve, Powerjet guns, etc.) and achieved excellent productivity results (PI >120 m3/d/bar) with minimal formation damage.
* Successfully supervised Factory Acceptance Tests (FAT) and System Integration Tests (SIT) for the Amenam-Kpono well completions equipment in Halliburton's Factory @ Carrolton, Dallas (U.S.A.). Generated a technical report and used the experience to optimise the Amenam/Kpono well completion programs.
* Revitalized the Amenam-Kpono Coiled Tubing Tenders. Evaluated technical and commercial proposals and made selection of a coiled tubing contractor. Followed up governmental agencies/authorities with persuasions and obtained an approval.
* Managed actively Amenam-Kpono completions contracts and the timely procurement of Amenam-Kpono completions materials.
* Managed the qualification of new completion components.
* Supervised the preparation of well completions sub-assemblies in the contractor's base.
* Supervised the execution of Amenam-Kpono well completion program offshore.
* Maintained an effective relationship with completion design and implementation specialists.
* Gave adequate technical directions and managerial support for in-progress operations on the rig.
* Identified completion risk and risk management.
* Conducted look-backs and debriefing as appropriate.
* Mentored and provided technical guidance to Graduate Engineers in development positions.
Other responsibilities:
* Nigerian Deepwater Exploration Sand Control Experience: AKPO, USAN, PREOWEI & EGINA Exploration wells: Successfully prepared, modelled and implemented various Sand Control (Frac pack, HRWP, IGP, etc) in offshore deepwater (up to 1500m of water depth) environment yielding low skin and low draw-down with substantial high productivity results (with a lot of lessons learnt for field developments in future).
* Acted as Head of Completions/Well servicing (in his absence) to manage the completions and intervention activities of all Nigerian fields (including onshore, offshore and deepwater offshore).
* Acted as Completion Superintendent for in-progress completion operations on the rig up to maximum of three (3) rigs at a time.
* Followed-up and evaluated various Petroleum Engineering studies for productivity enhancement and optimizations.

Completions Engineer 1999 - 2001
TOTAL E&P Port-Harcourt, Nigeria
* Field supervision of various types of well completions including gravel pack operations on Ofon Phase-I project.
* Understudied a Senior Completion Engineer.
* Conceptualised and supervised the implementation of field-wide offshore oil field stimulation campaign. Achieved substantial gains in wellhead pressures, gross and net production by 25 - 50% per well, with payout after 16 days (on the average).

Drilling & Completion Supervisor 1997 - 1999
TOTAL E&P Port-Harcourt, Nigeria
Effectively supervised the drilling and completion of 7 gas wells on IBEWA giant onshore gas field development project and within budget. Drilling & Completion budget in excess of 100 Million US$.

Field Engineer Trainee - Coiled Tubing 1996 - 1997
Schlumberger Dowell Port-Harcourt, Nigeria
Coiled tubing operations for various clients in the Niger delta. Intervention services include: stimulation (matrix treatment), gas shut-off, de-waxing, sand clean out, nitrogen lifting/well kick off, fishing, etc.

Senior Field Engineer - Solids control & Drilling Waste Management 1995 - 1996
Wasco Oil Tools Port-Harcourt, Nigeria
Planned and executed the management of drilled cuttings and drilling wastewater for various clients using closed loop and dry location concept approach. Operated and evaluated the performance of solids control centrifuges.

Senior Field Engineer - Solids control & Drilling Waste Management 1992 - 1995
Seric Impianti Port-Harcourt, Nigeria
Installed, commissioned, operated and maintained treatment facility for drilling wastewater. Performed effluent analysis and disposal of drilled cuttings.

Project Mechanical Engineer 1990 - 1992
NNPC Refinery Port-Harcourt, Nigeria
Coordinated and supervised the installation of Fire protection system on storage tanks (for hydrocarbon products).

QUALIFICATIONS

* M.Sc. Petroleum Engineering & Project Development, IFP School, France (2001)
* B.Sc. Mechanical Engineering, University of Ibadan, Nigeria (1990)

CERTIFICATIONS

* Shell Round 2 certified - Completion & Well Intervention (CWI)
* Certified Project Management Professional (PMP)

MEMBERSHIP
* Member of the Society of Petroleum Engineers
* Member, APEGGA

LANGUAGES
English (fluent), French (fluent)

OTHERS
SPE PAPER # 90760: Etuhoko, O. M. & Proctor L., "Monobore Completion Using Interventionless Technology in Offshore Horizontal Gas-Injection Wells", SPE conferences, ATCE, Houston, September 2004 & APOGCE, Perth, October 2004

REFERENCES
On request

LIST OF RECENT TECHNICAL TRAINING
2009 Project Management Professional (PMP) Training for PMP Exam, PMTI, Dallas, USA
2008 Shell CWI 200 - Completions & Well Intervention Operations, Shell EP International Centre, Rijswijk, The Netherlands
2008 Materials and Corrosion Training, Shell Canada, Calgary, Canada
2007 Project Management 2, Shell Canada, Calgary, Canada
2006 Production Operations 1, Petroskills, Calgary, Canada
2004 Hydrocarbon Portfolio Analysis and optimisation, SPE-APOGCE 2004, Perth, Australia
2004 Comparisons and selection of methods to control sand, SPE-ATCE 2004, Houston, USA
2004 Hydraulic Fracturing School, NSI Technologies, Denver, USA
2004 Advanced Fracture Pressure Analysis for Complex Reservoirs, NSI Technologies, Denver, USA
2003 Being Successful in Well Completions, Total E&P, Pau, France
2003 Practical Solutions to Complex Well Completions, Fracture Optimisation, and Integrated Production Development, CIPC, Calgary, Canada
2003 Well performance and Well Reservoir Diagnostics, CIPC, Calgary, Canada
2003 Sub-sea Wellhead and Xmas tree, Total E&P, Pau, France

VALID QHSE CERTIFICATIONS
2008 Tropical BOSIET Training, Lagos, Nigeria
2007 Emergency First Aid & CPR, Shell Canada, Calgary, Canada
2007 H2S Alive, ENFORM, Calgary, Canada
2007 WHMIS, Shell Canada, Calgary, Canada
2007 Well Service Blowout Prevention, ENFORM, Nisku, Canada

SOFTWARE TRAINING
2009 IPM suite (Prosper, MBAL, GAP), Houston, TX, USA
2009 WellCat, Houston, TX, USA
2009 Wellplan, Calgary Canada
2002 Stresscheck, Landmark, Scotland, Aberdeen
2002 Wellcat, Landmark, Scotland, Aberdeen
2002 Wellview, Total, Port Harcourt, Nigeria

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 10902)

Go to Search Parameters...

Brief Description

HYSYS/PROII/NGL/LPG/LNG/SYN GAS - CONCEPTUAL, FEED AND DETAIL - REFINERY, NATURAL GAS, CRYOGENIC PROCESS, SOUR GAS REMOVAL, ADVANCED PROCESS CONTROL (APC), GASFICATION (BtL, CtL and GtL). DISTILLATION AND REACTOR. HYSYS/PROII/ Distillation/Separation Sequence/Pinch Analysis.

HVAC FOREMAN

Drilling supervisor onshore with a good experience in multilateral wells.

22 years experience in maintenance , compressor , generator , pump , drilling equipment , machine shop service , manufacture , inspection service , production , wire line , fishing tools , welding work , commissioning.

Process/Commissioning/Start-up/Operation/Exploitation/Engineer

Condition Monitoring, Reliability Engineer

HSE-Engineering Graduate, P.G. Diploma in Industrial Safety, NEBOSH ,Ecology & Environment, Lead Auditor OHSAS 18001, specialized in Process and project Safety Management, Safety Auditor, Emergencies Planner, Advance Experience in the Management of Major Accident Hazards Controller and Trainer

Free! Geologist with 20 years experience in minerals exploration & oil and gas industries.

Pipeline, Piping & Mechanical Equipement design and construction support

Worked in exploration, production and academia

Pressure vessel design engineer, Proficient with: SolidWorks, Inventor, Pro/E, AutoCAD, Algor, ANSYS, COSMOS, Matlab, Compress Codeware, Intuitive ERP; Proficient with ASME Code VIII, Div. 1 & ASME Code VIII Div. 2, B31.3; kill at using the knowledge in WRC107 & WRC279

Highly skills reservoir engineer with 18 years E&P experience and a Masters in Petroleum engineering Degree. Experience includes reservoir simulation, water flood design and management, EOR techniques, Heavy oil development, reserves evaluation, well test design and analysis & reservoir management

19 years experience in the Oil Industry with both service company & operators in UK, Oman, Australia, Brunei, Saudi, and Malaysia. Experience in Field Development Geology and geocellular modeling.

Position: Senior Instrument Engineer / Qualification: Master of Science (Electronics) - Queen’s University of Belfast

Professional Engineer with 19+ years of experience in engineering and project management, including design, sizing, and specification writing of various static and rotating equipments.

A seasoned completion/well intervention/well test professional with 18 years of experience with expertise in sand control, intelli.

Sr. Geologist with strong project management experience

the position of Chemist and subsequently to put my contribution for the growth and development of the company by utilizing my best efficiency and skills and to achieve my further career advancement opportunity.

first class marine negineer

Experienced Principal/Senior Control Systems Engineer who can contribute significantly to your company.

I submit my application for the same.For the Eighteen years , I am working with Reliance Industries Limited Hazira Complex. During this period I was involved in setting up different laboratories , e.g.Water Laboratory,MEG Laboratory,PVC/VCM Plant Laboratory,Polyethylene Plant Lab,Polypropylene

MS in Petroleum Engineering, 20+ Years experience as Reservoir Engineer. Skilled in Reservoir simulation, Field Development Plans and Well & Reservoir Management.

A proactive and enthusiastic individual with 17 years of extensive expertise in the field of offshore positioning/navigation/geophyscial/pipeline/hydrographic survey.

Sailed for lasat 18 years on board Chemical, petroleum, OBO and Bulk carriers. Extensive experience on drydocking and repair yard. Completed conversion of a ship to FSO at Keppel Shipyard.

Sequence Stratigraphy, tectonic, pre/post-stack seismic attributes, petrophysic, static reservoir modeling, fracture modeling

I have 18 years experience in Oil & Gas Industry.Experience in completion execution: Completion activity and workover operation, Well Testing (Oil / Gas), Gravel Pack, Gas Lift, Submersible Pumps, Perforating Technique, Well Stimulation (Acid / Frac), Cement Squeeze Operation.

Well-developed interpersonal skills.

Senior Process and flow assurance engineer with full project cycle experience.

HSE / Terminal Operations / Construction / Turnaround

I am a licensed Canadian engineer with M.Sc. degree and 28 years experience in Instrumentation & Control Systems (DCS&PLC) design, instruments specification (InTools), purchasing, commissioning, start-ups, maintenance, and training. In past twelve years I worked with major EPC offices in Calgary

I am an MBA with an engineering degree and over 18 years of experience in oil and gas industry across various disciplines like HSEQ management, offshore opeartions and construction projects. Currently, I am employed as the Head of HSEQ at a large organization.

Administration & Finance Specialist in Most Fields of Oil & Gas Industry

With over 28-years of procurement and logistics related experience in the Oil & Gas (Domestic, International Field and Office). Well respected by service and supply companies worldwide, I am currently seeking a challenging position in an international company. Whereby, I can utilize, enhance, and co

Piping Stress Oil/Gas, Off/Onshore, FPSO's and Nuclear - Caesar,Autopipe and PSA5

A committed and professional with over 27 years of progressive and varied experience in the field of Mechanical Engineering in the areas of Operations, Maintenance & Inspection of Petrochemical, Oil and Gas Equipments, Marine equipment. Expediting of equipment for oil and gas industry

I am a positioning specialist/navigator with over 19yrs post qualification experience. I have worked in various countries including USA, Saudi Arabia, Nigeria, Chad, Egypt, and UAE. I am experience in both marine, land, desert operations seismic surveys. I have also worked as a consultant client rep

Highly competent contracts administrator with extensive experience administering multi-million-dollar-dollar contacts for major projects in the power sector. Expertise includes managing pre-award contract management as well as post bid contract management incl. expediting.

I am Petroleum Geologist with +20 years experience in subsurface projects. These experiences cover mostly production geology, drilling operations and a few exploration projects. I was also involved in heavy oil projects, including drilling operations, well geostering and geocelular 3D geologic model

- Coordinating services e.g. directional drilling, fishing, drilling tools, liner hangers, packers, cementing, stimulation, wire line, geology, gyro survey, electro logging, etc. - Implementation of logging operations and witnessing the same. - Monitoring well profiles as per requirements (both Ge

Experience 14 years in Refineries (Fuels & Lube) as a Process Engineer to Technical Services Manager in India. 9 years in KNPC as a Process Design Engineer, in Project Department, implemented minor and major projects in 3 Refineries. 3 years in EPC Company, Canada, Designed SAGD utilities and SRU.

B.Sc. in Petroleum Engineering, 28 years work experience whereof 16 years in drilling supervision and operations, 4 years drilling engineering and planning.

Rigging & Lifting Specialist

Worked on onshore Oil collection & processing plants, Gas Plants, Offshore Platforms & FPSO during pre-commissioning and commissioning levels.

Over 30 years experience in Oil and Gas Petrochemical Industries onshore and offshore in the UK and overseas. Experience gained on various onshore projects, i.e. Power Plants, Chemical Plants, Pumping Stations, Alumina Plant, and Petrochemical Refineries ;BSc Mech. Eng..

Free! I am an International Sr. Well Engineer with a wealth of worldwide experience and knowledge. I have a Petroleum Engineering degree and 27 years in the industry. I want to continue to contribute to the technological challenges of the energy arena, particularly offshore, subsea and deepwater.

Over 25 years of international oil/gas industry experience as a professional Geologist, I worked on Africa, Middle East, Canada, North Sea, India, Kazakhstan, Trinidad & others. Proven track record in geological exploration & development venues: prospect generation, new ventures andplay fairway

Marketing Leader

Qualification : B.Sc. Accounting and MBA Accounting and Finance. Experience : 18+ years experience in contracts and procurement (C&P) for oil and gas industry. Manages and executes all steps of the contracting processes, i.e tenderings to contract closures.

Drilling exploration production, per cv below

B.E. (Mechanical) - 1980

First 1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out