Resume - Motivated and capable in team or independent work setting , Strong problem solv...

Misco Jobs

Resume #82912

CONTACT INFORMATION:
View contact information...

Objective
* To apply my experience and knowledge to reach my employer's and my shared goals.

Formal Education
* Universidad Interamericana del Norte(Mexico).
Profession: Industrial Engineering
Degree: Production Systems.

Technical Courses

* First Aid
* Lean Manufacturing
* Leadership
* 5'S
* QS9000
* TS 16949
* AS400
* Quality Control

Language
* English
* Spanish (native)

Work Experience
* Process Color
Technician Process
Dec08 – Present o Operating some digital printing machines where my duties are: working with digital equipment; making necessary adjustments; filling ink fountains; setup press and operation to check samples; monitor regular press run for quality using computer control console.
o Member of the Quality Team. Continue to improve and reduce the scrap; Involves in maintenance corrective and preventive issues; detect and troubleshoot irregularities and malfunctions; repair or replace defective machinery parts; keep the control are clean and safe; and receive customer visits.
* Miracle Imprint West (Promotional Printing)
Decoration Production Manager
July 06 – Dec08
o Machine programming; troubleshooting and expediting in assembly area to ensure complete work order; process improvement with new tools, chemicals, operator training; quality control at the printing and assembling stages; managing the storage and handling of several chemicals; inventory management; maintenance management, review blue prints, update the equipment and installing the new equipment.

* Fawn Plastics of Mexico (Automotive Business)
Technician - Decorating Plastic Manager
April 2001- July 2006
o Began as Process Technician assisting in launch of Pad Printing and Screen Printing process; became Production Supervisor with an average 25 operators under my supervision; main priority was quality improvement – succeeded in reducing scrap in 5 weeks from 7% to 1%; acted as Quality Inspector on the Production lines under my responsibility; gained much recognition due to improvement efforts;
o I was promoted to Superintendent Production with 70 operators with 4 Team leaders (Laser, Pad Print, Mold, Assembly Process); my main task was to reduce absenteeism and rotate operators to improve quality; collaborated with Human Resources to determine root causes; obtained good results within 3 weeks improving safety, quality, efficiency and productivity.
o Reduced scrap on delicate pieces (bezel frame and buttons) from 17 % to 5.5 % scrap in 2 months; managed rework problems by placing rework stations on the production lines to do it on the same process and avoid inventory (material on Hold).
o Promoted to Decoration Manager with main task to improve safety, quality, efficiency and productivity; managed 140 operators; worked with other departments to obtain QS9000 and TS 16949 certification.

* Viasystems (Appliances Company)
Tool Crib Supervisor – Supervisor of Tool Room Maintenance
December 98 - March 2001
o Maintained safe workplace and followed the production program; improved setup machines ; supervised 20 operators.
o Received promotion to Tool Room Supervisor within 1 year; managed spare parts, maintenance & preventive/corrective planning; supervised 24 technicians;

* Corporation ALSAN( Resorts)
Maintenance Plant Supervisor
Start date: Nov 86 until Dec 96
o Began as Driver and was promoted to Maintenance Supervisor; managed maintenance of facilities (fleet, building, safety policy); Worked while completing university degree in Engineering

References

AVAILABLE UPON REQUEST

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1801 to 1850 of 10902)

Go to Search Parameters...

Brief Description

Static Equipment Mechanical Engineer

Simulation studies, preparation of detail feasibility reports, FEED package, detail engineering, HAZOP, licensor selection, debottlenecking of existing units etc.

A highly creative, goal-oriented process design engineer with strong communication and presentation skills. Demonstrated experience in design, simulation and engineering calculations. A team player and computer professional.

Petrochemicals Marketing Consultant

Senior Petroleum Engineer with Six Sigma Master Master Black Belt Proviciency. Best for Oil Company who need to IMPROVE its PRODUCTIVITY. High production, safe, with lower cost.

Gas engineer, pipeline engineer, gas distribution, transportation, metering reducing gas, midstream/downstream gas, gas facilities.

Full hands-on maintenance, Working under extreme conditions

M.Sc. Petroleum Engineer with excellent experience in Petrophysics- Specialist in Geolog Software_highly self motivated, Oriented and hard working, able to work in multidecipline, willing to travel internationally on mission

sr mechanical engineer

Linux/Storage Admin

Piping detail design isometric MTO and layout detailng etc

Highly skilled engineer with over 10 years experience undertaking electrical engineering projects as well as having an understanding of industrial automation

Currently authorized to work indefinitely in the United States (Green card holder). Have more than 6yrs work experience in the oil industry. Worked as a Petroleum/Reservoir engineer and well versed in EOR and secondary recovery techniques and use of commercial reservoir simulators

Currently working as a Civil/Structural Engineer in WORLEYPARSONS (ABU DHABI – UAE).

I am a fully qualified Electrical Engineer to HNC level, having served my apprenticeship with a multi-national company within the UK. I enjoy excellent health and am competent, dependable and hardworking. I am equally comfortable working on a solo project or as part of a team.

Mechanical Engineer with 12 +years expereince with experience in Front end Engineering and Detailed (FEED) Engineering, Project Management and supervision industrial projects in Petrochemical/Oil & Gas. Presently i am working in a Engineering Consulting Company in Saudi Arabia.

Having total 10 years of exp. in HSE-Safety field in Petroleum/oil/gas Project, steel, automobile plant and project at Oman , UAE, Qatar & India

Over 10 years experience in shipping industry mainly in estimation, project planning, building, design and purchase.

SENIOR PIPING / MECANICAL DESIGNER

Geotechnical Field Rep

•Extensive exposure to complex clastic environments. •Pick up formation boundaries and lithology changes; determine casing point.

A highly skilled Chemist Engineer with over 24 years experience in Oil and Gas Industry in Romania and abroad. QUALIFICATIONS: technical advisor, training supervisor, commissioning & start up engineer , shift supervisor

I have 20+ years experience in fire, safety, risk, design and testing. Of this 14 years were spent overseas.

Senior process engineer O&G; 20yrs exp. FEED, basic & detailed eng, operations. Troubleshooting, P&ID, C&E, risk assessment, HAZOP. Units: compression, dehydration, oil/water separation, cond. stabilisation, hydrates, gas/water injection. Computer skills: Hysis, ProII, Pipephase, HTRI, Flarenet.

Senior Mud Engineer as employee with Halliburton – Baroid at Port Harcourt Nigeria, working offshore Guinea Gulf in deep water Rigs.

Senior Lease Operator with 20+ years experience in Oil and Gas Operations.

I have been working offshore for the past 25 years, working my way up through all positions to Day Drilling Supervisor. Since August 2007 to present, I have been working onboard the ‘Wilcraft’ jack up rig first as Night Drilling Supervisor and as of September 2008 as Day Drilling Supervisor.

I´m WSG, I´d worked in Mud logging services & Geochem Lab in Brazil more than 8 years, my last 3 years working in Argentina as WSG

NAval architect

Motivated and capable in team or independent work setting , Strong problem solving abilities, Mechanical aptitude, Receptive to feedback, Attention to detail with strong sense of urgency and precision , Honest and hard worker, Quick learner, Supervisory skills (managed up to 60 people),

Rig Mechanic 32 years exp onshore and offshore with supvisory esperience also

28 safe years in the oi and gas/petrochemical industries. Worked in commissioning jobs throughout Canada and I am seeking an international placement with 28/28 rotation onshore

Free! Highly Experienced Operations Manager

iadc certified drilling supervisor with 25 years experience in the oil & gas industry. Strong knowledge of all aspects of drilling in both horizontail & verical wells

Extensive experience of installation and inspection & supervision of electrical equipment in hazardous and non-hazardous areas i.e. - Installation and commissioning of P.L.C. panels: switchboards: main circuit breakers: transformers: generators: 3 phase motors: 3 phase power supplies: marshalling bo

QA/QC Inspection Engineer

I am a Petrophysicist with 8 years experience in a major independant energy company. I have worked in exploration and field development. I have a masters degree in petroleum geology and undergraduate degree in geology. I have well developed communication and interpersonal skills.

A result-oriented Instrument/Control Systems Engineer offering over 11 years of experience in the Petrochemical, Oil, Gas and Refinery industry handling operations and maintenance.

Varied geographical experience and knowledge of most mud systems used by mud companies in the industry and all type of cement slurries.

With a passion for safety duties, the motivation to succeed, strong interpersonal and effective communication skills and a particular talent to forward-planning to develop effective and feasible solutions

My skills as a drilling foreman are Drilling, Work Over, Completion and Safety. I have 40 years of oilfield experience. I have an up to date Well Control Certification.

Pipeline & facility supervision

Looking for and Field Operating Position / Production Coordinator, Can also Well Service

Repair, maintenance and troubleshooting onshore and offshore units (ONCC, OLU), Generators, Compressors (WAC-SS22, WAC-QB), Hydraulic units (EHPS, DAPS, OSU,OSLC), HVAC. Hook – up, setup and installation offshore & onshore equipments Corresponding with Customers and Suppliers I have

I am someone who is highly motivated and organized. I have over 20 years in the construction industry, including work in Western Canada and time in Angola as a Construction manager, where my duties were tto evaluate and implement new processes to achieve cost certainties in an exploration environmen

I have extensive supervision and management experience (including QA/QC) on contracts valued from £30 million to £3 billion in the fields of Oil & Gas related work, military airfields, Power plant construction, water provision and dam construction in the Middle East, Africa and the Caribbean.

Reservoir or Production Engineer

Social Responsibility Specialist

Mechanical Engineer, with +30 yrs experience in Quality Assurance Management and Engineering Management, executed more than 10 projects in Fertilizer, Refinery and Petrochemical industry

Petroleum engineer with 20+ years of diverse experience. 4 years of multi cultural supervisory experience in North Africa. References available on request.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 [ 37 ] 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out