Resume - My career objectives, strengths and experience in the workforce I am a skilled, ...

Misco Jobs

Resume #82915

CONTACT INFORMATION:
View contact information...

OVERVIEW

My career objectives, strengths and experience in the workforce

I am a skilled, experienced and respected heavy equipment mechanic with substantial experience onshore & offshore Australia and overseas particularly here in Asia. I have supplemented my mechanical practical experience over the years with valuable experience taking on oilfield related projects as an independent consultant ……..

Whilst working overseas for the past 17 years, I was employed primarily in developing countries. I demonstrated my ability to adapt to demanding conditions in remote and inhospitable regions. I also gained significant experience in training nationals in the use and maintenance of a broad range of equipment.

Amongst my strengths can be included safe work practices, sound practical knowledge and the ability to work autonomously. These strengths have been displayed while working in Australia, Thailand, Indonesia and Malaysia.
I have been involved in project supervision, rig inspection, new equipment installation, repair and re-certification of drilling equipment, commissioning, shipyard refit and repair, modification and upgrade to existing structures, maintenance system implementation and commissioning, along with day to day operations and vessel/ rig acceptance process with various regulatory bodies.

RELEVANT TRAINING & EXPERIENCE

Trade Certificate- Diesel Mechanics (No.1750)

Cummins Diesel Training (No.S855244)

Caterpillar Engine Training (D399, 3500,3400 Series)

Varco Top Drive Training TDS 3, 4, 9

ABS (NS5) Maintenance System

Basic Fire Fighting (Saval)

Advanced Fire Fighting (Saval)

Emergency Management (Saval)

Industrial Rescue (Saval)

Smoke Evacuation (Saval)

Basic Sea Survival (M&O)

Helicopter Escape, Huet (M&O)

H2S Awareness (Alert)

Forklift Operator

Basic First Aid

POSTS HELD:

2007 - Present: *(Available at present)

INDEPENDENT CONSULTANT
Recent Projects:

* Supervision of refurbishment to drilling equipment (mechanical/ electrical) Apexindo Offshore Div.
Indonesia

* Inspection of Jack Up & Platform rigs for Ramunia Drilling, Malaysia

* Commisioning/ De-commisioning of Platform Rig, Total, Abu Dhabi.

MERMAID DRILLING LIMITED
Maintenance Superintendent
March 2005- August 2006

Mermaid Drilling is a new recently formed Offshore Drilling Contractor. My original position with this company was to appraise the condition of two Tender Assist Drilling Barges owned by Pride International. These two available units where quite old and required an in depth analysis of their overall condition, life expectancy of drilling and marine equipment, including their condition in relation to OEM, API & ABS standards prior to purchase.
I joined this company as an Inspector for the above purchases and delivery of the vessels which took a period of eight months; this was the completion of my initial contract with Mermaid Drilling. After a short break from the company

Mermaid requested my assistance to step in as a Maintenance Superintendent due to several issues. Down time due to electrical & mechanical problems on one of the vessels reached 10% at one stage which is not an acceptable level. For the initial three months that followed I was able to bring this unit back under the 2% margin, this process entailed evaluation of Maintenance personnel, interviewing & hiring new personnel, revision of maintenance and commissioning procedures after rig moves.

The second task that has been set is to improve the speed of the larger 2000HP rig, due to its design several features required reviewing as to the possibility of modifications, this is to date an on going issue with constant improvements as time allows. Additionally the vessel is due for its 6th Special Periodic Survey. Myself, including the Rig Manager are the two key personal managing this operation, myself primarily concentrating on Re-certification of all drilling equipment to API standards along with the vessels electrical & machinery maintenance to meet ABS regulations.

The position has required extensive travel between their Corporate office in Bangkok and Operations office in Kuala Lumpar along with frequent trips to the rigs to design, plan & implement the required goals.
These vessels have been stationed in the Gulf Of Thailand, Indonesia and Malaysia.

SMEDVIG ASIA
Chief Mechanic
Aug 2002 – Feb 2004

Smedvig Asia run several Tender Barges with Pyramid Derrick sets predominately in the Asian region. I had previously worked for Smedvig overhauling their Caterpillar Engines on a contractual basis.
This later 1 ½ year position was accepted for the duration of their contract with PTT Thailand prior to the rigs re-location to the Congo. Due to the nature of the formations in the region these units are extremely fast drilling units which move frequently.
The position itself focused on ongoing concerns with de-salination plant problems, engine upgrades, improving rig down/ up times, preparation for dry docking along with normal day to day maintenance.

SANTE FE (Asia)
Project Consultant
Jan 2001 – Feb 2002

Upon the arrival of "Sante Fe's" "Compact Driller" Jack Up Rig in Thailand the unit was run down and suffering from neglect after spending several years in the West African region. I was involved in a one year campaign to assist return this vessel back to its former glory. My involvement in this was specific areas such as; National Power Swivel Overhaul, 3000hp Drawworks overhaul including solutions to long term disc braking issues, electrical re-routing, Caterpillar 3500 series overhauls, and installation of TDS4 Top Drive.

PACIFIC TIGER ENERGY (Thailand)
Consultant Company Representive
Mar 00 – Aug 2000

On-site company rep for single 1200m onshore oilwell. General organisation of contractors, ensuring drilling parameters where met, reporting to head office.

DEUTAG DRILLING (Thailand)
Rig Mechanic/ Maintenance Supervisor
March 93 - May 99
This position involved looking after several different types and sizes of land drilling rigs throughout Thailand, on occasions, single handedly preparing these units prior to rig crews being mobilized from Europe single handed.
Due to the fact that I was based in Thailand I was quite often called to various rigs for support & trouble shooting.
One of these particular rigs held the record as being the most productive and fastest moving within Shells operations world wide, myself along with other key personnel where instrumental in obtaining this milestone by improved rig move planning, modification to structures to allow faster rig down/ up
General work scope involved repairs, maintenance and mobilization of medium and heavy drilling rigs, involving supervision and responsibility of all mechanical, welding and structural repairs and modifications. Aid in mobilization and positioning of approx. 100 semi loads of rig package on a 2 -3 week basis. Driving of smaller truck mounted drilling rigs (80T) to locations throughout Thailand.
Main types of equipment included: Cat D399 & 8's/ 3400's/ 3300's Cat Forklift/ Loaders. Detroit '71 Series. Varco TDS-9 A/C Top Drive, Emsco FB 1300 Mud Pumps, National 80B Drawworks, Dreco cantilever Rig with skidding equipment, Wilson 75 truck mounted rigs, Mercedes 6x6 winch trucks, Grove/ P&H 4x4 rough terrain cranes.

LONGYEAR/ MINTEK INDONESIA
Chief Mechanic - Field Service
Aug 91 - Dec 92
Run base workshop, maintain a fleet of Mineral Drilling rigs and Hydraulic operated slimhole oil Drilling Heli rigs.

Posts Held…cont'd

AZTEC DRILLING THAILAND
Rig Mechanic
Jan 91 - June 91
Maintainance Wilson Mogul 42 truck mounted compound rig.

WEATHERFORD AUSTRALIA
Operator/ Mechanic
June 90 - Jan 91
Running of casing on offshore oil rigs, maintenance of all equipment.

KENNEDY ENGINEERING AUSTRALIA
Leading Hand
Jan 90 - June 90
Open cut mining operation, maintain fleet of Komatsu 50T Dump trucks, Excavators, Graders, Bulldozers.

HENRY AND WALKER CONTRACTING
Field Serviceman
Jan 89 - Oct 90
Oversee repairs/ maintenance to small fleet of open cut mining equipment including Cat 777 dump trucks, Liebherr excavators, Air drilling rigs, Grader & Dozers located in the Tanami Desert.

BLACKWOOD HODGE/ CUMMINS DIESEL
Field Service Mechanic
Jan 87 - Oct 88
Rebuilds to complete range of Cummins & Detroit engines, Terex, Euclid earthmoving equipment, Kobelco P&H cranes, marine, oilfield & power generation equipment.

SKILLS

TECHNICAL
SKILLS Demonstrated safe work practices

Extensive mechanical experience

Experience with diesel and gas equipment

Onshore and offshore experience

Structure Design & Fabrication

Power generation equipment experience

Heavy equipment experience

Desalination treatment plant operation

Equipment installation and commissioning experience

Timeline Improvement for mobile drilling units

PEOPLE
SKILLS Motivating the workforce

Training apprentices and nationals

An excellent rapport with colleagues

Liassing with fellow professionals

Well proven management qualities

Liaising with suppliers, subcontractors

Flexibility

An understanding of industrial relations

SKILLS

COMMUNICATION
SKILLS Good oral communication skills

A professional telephone manner

Effective listening skills

A good general knowledge

Technical report writing

Able to communicate effectively at all levels

Fluent Thai, some Indonesian spoken

ORGANISATIONAL
SKILLS

Ability to set priorities

Able to delegate

Decisiveness

Some exposure to sourcing and purchasing

Working to deadlines

Problem solving and fault finding

Proven analytical skills

Lateral thinking

Enforcing strict safety control

Maintaining maintenance programme

Maintaining daily work schedules

Identifying deficiencies

Improving methods to increase effectiveness

REFEREES

Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1101 to 1150 of 10916)

Go to Search Parameters...

Brief Description

Senior Piping Designer

25+ years experience in piping design of power plant,refinery, and chemical plant exoeriences. Field experience included.

I am presently the Subsea Toolpool manager for a major Oil operator's Subsea Wells dept operating in Angola.This work is combined with an ROV interface engineering workscope.

Diesel mechanic and maintenance on all generators, trucks, cats and vehicles. I also know welding and boat engines( inbord and outbord).

QA/QC NDT and RT Interpreter Coordinator 5 Years QA/QC Welding and Fabricating Inspector Lev 2 8 Years Welding Instructor /Team Leader 3 Years Supervisor/ Superintendent / Piping-Mechanical-Structural 7 years

Electrical Design, Drafting, Construction and Procurement

Autocad, microstation, frameworks 2-d and 3-d cad structural designer

Quantity Surveyor - Estimator for Oil and Gas, Petrochemical, Hydro Power Plant, Fabrication Shop, 24 yrs. exp.

Experience 2D, 3D, and 4D land seismic surveys. Vibroseis, dynamite and airguns. Terrain derest, bush, swamp, transition, heliportable and urban

Anhydrous Ammonia production for 30 years

Over 22 years in Plant Operation in round the clock shift duties.

Oil Industry 37 years, Regulatory, Environmental, Safety 28 years,

Worked in Irak, and Afghanistan , still have valid Work Permit and visa for Afghanistan, Gen technician

Sr.PDS/PDMS Piping Design Engineer/Designer / PDS Administrator /Lead piping Engineer/Designer.

A Mechanical Engineer with 20 + years of experience in O&M of large Diesel engines and various machineries in power plant and marine industry

Senior Executive with more than twenty years of experience, many of them abroad.

Project / Engineering of facilities for the domestic and international oil and gas industry with emphasis on Structural and Foundation Engineering. Strong knowledge of processing, and construction of platforms, pipelines, platform drilling /workover rigs, etc.

Offshore Oil & Gas Paramedic

Fifteen years of experience in Refinery, Oil & Gas and Petrochemicals field as a Piping designer in producing plot plans, Equipment Layout, Piping General Arrangement Dwgs, Piping isometrics, Jacketed piping isometrics, M.T.O., Stress isometrics, Sketches, Nozzle orientation and as-built Drawing on

Servicing oil and gas wells; running/pulling tools ,well clean outs using nitrogen

chemical engineer in pakistan steel mills

I am an IRCA (UK) Registered QMS 2000 Lead Auditor, currently working QA/QC Manager with an EPC Company for Yemen LNG Project, Balhaf site, Yemen.

Operation Management for FPSO / FSO

Petroleum Engineer with extensive experience in Drilling, Operations, Drilling Management. Trained in: Offshore, Onshore, Inland-waters. HTHP wells, Gas wells, Horizontal drilling.

Engineering professional with 17+ years of experience within diverse oil, gas field, refinery and petrochemical industrial arenas. Expert level engineer for instrumentation and control disciplines.

Reliability / Maintenance / Rotating Equipment Engineer with 20+ years of experience in Oil / Gas / Petrochemical / Utility industries.

Experience with handling database and managing data. Very familiar with writing database queries in SQL, as well as developing database scriptings. Industry expert in data quality.

Over 13 years of solid experience in piping stress/pds design for Refineries,petrochemicals,fpso&power projects.

To present my background and what I can do in the company with my skills.

Saudi Aramco Approved Vendor Inspector SAP No. 70004827, Certified API-510, Cswip 3.1, NDT Level2, ISO 9001.

13 years oil industry experience,• Drill wells up to 6500 mt, High temperature gas wells, drilling of horizontal multi-lateral hole, sidetracks, H2S Environment,Run 5 1/2" expandable liner & Run 4 1/2" completion assy., with 4 1/2" liner cemented off bottom

Sales Professional

Analytical, communication, result oriented, and learning for development

Experienced Operational personell in the field of oil and gas / petrochemical with commissioning experience

Geophysicist with over 12 years experience in various aspects of geophysical works. Proven solid experience in: 2D/3D seismic interpretation, Velocity Modeling, Acoustic/Elastic Inversion, AVO/AFI analysis,Seismic Inversion

Designation project supervisor in higher risk environment

Mechanical engineer graduated in 1991 from Damascus university (machinery department)since that date (15 years experience in oil and gas industry in onshore and offshore)I have been in several companies(SPC,SCOT,Alfurat petroleum co with SHELL in their gas plant.

20 years experience in process and laboratory analyzers in refinery and Petrochemicals operations world wide. Graduate degree in analytical chemistry. Willing to relocate.

Sr. Civil Structural Designer

Working as Well Site Geologist for Oil Field Instrumentation, India. Our client is MEDCO international an Indonesian company. Presently I am working in Oman. I have worked in the following fields of Oman: Simsim, Warad, Basma and Irad.

PANEL AND FIELD OPERATION

CAREER SUMMARY : Vast experience in the field of industrial piping, i.e. petrochemicals, fertilizer, synthetic fiber, refinery, polyester and pharmaceuticals industries. Main responsibilities includes - model review, piping designing, supports, drawings checking, site survey and coordination.

I have worked in the Oil & Gas industry for over 20 years

HSE Manager with international experience. Nebosh certificate.

My career objectives, strengths and experience in the workforce I am a skilled, experienced and respected heavy equipment mechanic with substantial experience onshore & offshore Australia and overseas particularly here in Asia.

Experience in Supply and Demand Planning, Customer Service, Logistics and Purchasing

Drilling Supervisor / Drilling Foreman / Comapany Man/ Drilling Engineer

Working in the North Sea in UK, Norwegian and Dutch sectors. Projects for Seafox 4,Sean P, Clipper, Britania,Transocean Leader, Transocean Winner, Deepsea Delta, Njord A, Troll A B C, Ocean Vanguard

Client Representative QC navaigation,

Snr Completion's & Well Intervention Supervisor

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 [ 23 ] 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out