Resume - 5 years experience in piping stress analysis using CAESAR II in reputable compan...

Misco Jobs

Resume #82972

CONTACT INFORMATION:
View contact information...

POSITION
* PIPING STRESS ENGINEER/PIPING SUPPORT ENGINEER

JOB OBJECTIVE

A highly motivated person committed to pursuing a long-term career in engineering and construction in a very competitive environment in order to fully develop my technical and management skills.

EDUCATION AND DISTINCTION

* Bachelor of Science in Mechanical Engineering
Batangas State University, Philippines (1998 – 2003)

* Registered Mechanical Engineer (Philippine Regulation Commission)

* 9th Place, Mechanical Engineer Licensure Examination (Philippine Regulation Commission)

GENERAL JOB DESCRIPTION

* Produce schedule of critical lines as per project requirement.
* Prepare piping stress sketch from isometric and/or general arrangement drawings with all relevant mechanical data information.
* Perform piping stress and vibrant analysis on lines identified in the schedule of critical lines which are attached to pumps, air fin coolers, heat exchangers, pressure vessels, tanks, fired heaters and others using CAESAR II taking into account all Codes, Client and Inspection authority requirement.
* Recommend alternative route to resolve stresses within allowable limits of the equipment and to satisfy piping code requirements.
* Perform various types of engineering calculations such as flange leak check, trunnion check and nozzle load evaluation based on the Codes and Standards.
* Perform pipe loading calculation for civil information
* Perform a minimum of visual inspection and check on non-critical lines to ensure that sufficient piping flexibility exists in accordance with the applicable design code.
* Check piping layout if all piping stress analysis requirements are met. Reviews all design information affecting other discipline and/or vendors if properly recorded and promptly transmitted.
* Prepare piping stress packages and documentations for submission to Client.
* Verify line routing and pipe support location through construction site visit observing all rules and regulations inside the refinery.

* Specify usage of special supports/engineered items such as spring hangers and sliding plates.
* Perform design and selection of spring using the PSDesigner and/or WitchHanger.
* Suggest special piping support configuration.

* Prepare and conduct technical training including pipe support selection criteria, principles of pipe stress analysis, pipe loadings and others to Piping Design group and other engineering groups

* Prepare work schedule, man-hour report and conduct weekly meeting for the status of piping stress activities within the project.
* Prepare man-hour planning and budget.

SKILLS AND QUALIFICATIONS

* CAESAR II 4.5, 5.0
* SmartPlant Review (SPR)
* With training in Plant Design System (PDS), Microstation and AutoCAD.
* Microsoft Office Suite (Word, Excel and PowerPoint)
* PSDesigner, WitchHanger

CAREER HISTORY

* Foster Wheeler E&C (Malaysia) Sdn. Bhd.
Kuala Lumpur, Malaysia (14 February 2008 – 24 April 2009)

POSITION: Piping Stress Engineer
PROJECT: PSR2 Revamp Project (Malaysian Refining Company) in Petronas Refinery in Malaysia

RESPONSIBILITIES AND ACHIEVEMENTS
* Perform pipe stress analysis using CAESAR II 5.0 of 50 calculations in Unit 21 VDU and CDU. These include lines attached to pumps, pressure vessels, columns, heat exchangers, fired heaters and air fin coolers.
* Perform design and selection of spring using the PSDesigner and/or WitchHanger.
* Prepare stress packages for submission to Malaysian Refining Company.
* Verify line routing and pipe support location through construction site visit in the Petronas Refinery observing all rules and regulations inside the refinery.

CERTIFICATION
* NIOSH Petronas Safety Passport
* Petronas Safety Visa

* Hyundai Engineering Co., Ltd
Seoul. South Korea (19 January 2007 – 19 January 2008)

POSITION: Senior Piping Stress Engineer
PROJECT: Khurais Gas Contract (KGC) Project (Saudi Aramco) in Saudi Arabia

RESPONSIBILITIES AND ACHIEVEMENTS
* Prepare and establish CAESAR II input procedure as per project requirement.
* Perform pipe stress analysis using CAESAR II 5.0 of more than 50 calculations. These include lines attached to pumps, storage tanks, compressor, pressure vessels, columns, heat exchangers, fired heaters and air fin coolers.
* Check stress isometrics based on pipe support location, layout, equipment nozzle orientation, line condition and others. Revise related stress isometrics CAD files for changes.
* Prepare stress packages for submission to client.

* JGC Corporation
Yokohama, Japan (17 May 2006 – 29 July 2006)

POSITION: Piping Stress Engineer I
PROJECT: Hawiyah NGL Project (Saudi Aramco) in Saudi Arabia

RESPONSIBILITIES AND ACHIEVEMENTS
* Perform pipe stress and vibrant analysis for pipes attached to storage tanks, pumps, pressure vessels using CAESAR II 4.5 taking into account all Codes, Client and Inspection authority requirement
* Check piping layout if all piping stress analysis requirements are met. Reviews all design information affecting other discipline and/or vendors if properly recorded and promptly transmitted

* JGC Philippines, Inc
Muntinlupa City, Phillippines (21 July 2004 – 19 January 2007)

POSITION: Piping Support Engineer (01 August 2006 – 19 January 2007)
PROJECT: Dung Quat Refinery (Vietnam and Oil Gas Corporation PETROVIETNAM) in Vietnam

RESPONSIBILITIES AND ACHIEVEMENTS
* Perform pipe support selection based on project specification and requirement.
* Prepare special pipe support drawings and sketches to be approved by the Lead Piping Engineer.
* Review isometric drawings if all pipe supports are placed and identified
* Prepare and conduct technical training including pipe support selection criteria to design group.

POSITION: Jr. Piping Stress Engineer/Piping Stress Engineer 1 (21 July 2004 – 16 May 2006)
PROJECTS:
* Rabigh Development Project (Saudi Aramco & Sumitomo Chemicals) in Saudi Arabia
* Jubail Chevron Phillips Project (Jubail Chevron Phillips Company) in Saudi Arabia
* BAPCO-LSDP Project (The Bahrain Petroleum Company) in Bahrain
* 1200 MT Batch Reactor Project (Stepan Philippines Quaternaries, Inc) in the Philippines

RESPONSIBILITIES AND ACHIEVEMENTS
* Perform pipe stress and vibrant analysis for pipes attached to storage tanks, pumps, pressure vessels using CAESAR II 4.5 taking into account all Codes, Client and Inspection authority requirement
* Specify usage of special supports/engineered items such as spring hangers, expansion joint and sliding plates
* Prepare and conduct technical training including pipe support selection criteria, basic pipe stress analysis principles and others concerning this field of expertise to design group

* Manage a group of 6 piping stress technologists and engineers.
* Prepare work schedule, man-hour report and conduct weekly meeting for the status of piping stress activities within the project.
* Prepare man-hour planning and budget.

TECHNICAL TRAININGS
* Basic Supervisory Training
* Basic Vibration Analysis and Control
* JGC Piping Cadetship Training Course (960 hours)
* JGC Basic Engineering Program (104 hours)

* Pilipinas Shell Petroleum Corporation
Batangas, Philippines (10 June 2002 – 18 October 2002)

POSITION: Staff (Internship Training)

RESPONSIBILITIES AND ACHIEVEMENTS
* Perform assembly and disassembly of equipment parts such as pumps, compressors, valves and turbines.
* Perform other tasks as specified by the supervisor.

PERSONAL DETAILS
Age: 28 years
Date of Birth: 08 February 1981
Place of Birth: San Pascual, Batangas
Sex: Male
Civil Status: Single
Citizenship: Filipino
Languages Spoken: Filipino, English

CHARACTER REFERENCES
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7551 to 7600 of 10916)

Go to Search Parameters...

Brief Description

Having Diploma(3 years) in Instrumentation Engineering with 8 years Exp. in Oil/Gas field (Offshore / Onshore) projects, commissioning, maintenance.

IM Supervisor, DM Manager, Expediter, Technical Writing skills in authoring procedures, Business Development with Green conceptual ideas

I have over thirty years experience working in the oil, gas & petrochemical industries on the maintenance, construction & commissioning of various rotating & mechanical equipment. The positions I have held have been hands on and supervisory, in both the UK and overseas, working onshore and offshore.

I am interested in working for your organization. Presently I am employed at Sultanate of Oman. My responsibilities are Vessel berth assignments for the Container Ships, Bulk Cargo Ships, Passenger Ships, Oil and LPG Tankers calling in Port. My responsibilities also include Plan, Manage and Monitor

Mechanical Engineer - Rotating Equipment Engineer

A results-focused manager and leader who drives project teams to deliver outstanding results. Professional Engineer with 21 years of diverse experience in the hydrocarbon processing and minerals processing industries. Has exceptional experience on owner & EPCM teams.

Heavy Industrial Fitter with extensive experience on Fixed & Mobile Plant & Machinery. I have worked in Cross Cultures as a Mechanical Trainer/Supervisor.

i am a qualified Chemical and petroleum engineer with a masters degree, with upto 2 years experience in the exploration and production sector of the oil and gas field both in the field and design while using various softwares.

Geodetic Engineer exposed to various types of horizontal and vertical survey and can handle different geodetic engineering position.

Qualifications: Teesside University: 1st Year HNC Instruments, Cleveland College: BTEC National Cert Engineering, BTEC First Cert Engineering.

Strong engineering management and design background with a broad range of skills including: construction management, process plant design, subcontractors management, mechanical equipment specifications, project controls, material handling design including barge loading and unloading, AutoCAD

Geologist / Geotechnical engineer

Piping Field Planner/Engineer through 15 plus years journeyman experiece in the industrial construction industry.

Over six years of experience in geotechnical engineering including earthquake engineering and mining engineering. Has performed numerous analyses in ground deformation, lateral spread and foundation settlements caused by static and seismic loading using both traditional analytical methods and advanc

Hands on experience in USA chemical industries,environmental field, Groundwater Remediation , Industrial wastewater treatment , engaged in wide variety of environmental , chemical analysis .

Qualified and certified electrician, intensive troubleshooting skills

Production engineer, with strong knowledge in Rod Pumping, ESP, Gas Lift and softs related. Also production and inyection follow-up, project evaluation. Additionally experience in managment and operation.

20+ years of experience working in Materials Management, Inventory Control, Materials Planning Scheduling & Logistics, in both home office and field site locations on the construction of large petrochemical plants, natural gas plants, electrical power plants, and mining facilities.

Creating the Spool drawings for fabrication purpose using the Spoolgen Software.Input Files Taken from PDS, the Output is generated in Microstation,Checking the Generated Drawings & Documentation preparation.

Experience: Contract Management: Lining up contacts, Qualification: M.Tech.

Civil Engineer. Developing the 40 + retail outlet fro IOCL.IBP, Essar Oil in India.

B.E(mech) working in oil drilling rig of company "Nafta Pila" as HSE officer

Fresh Graduate and willing to work hard

I graduated from SAIT with a certificate in Process Piping Drafting awarded in September 2007. Through this program I gained knowledge in Natural Gas Processing, Piping Design, Plant equipment and Instrumentation. I have also had hands on training with AutoCAD, Microstation, ProCAD and 3dSmart.

Hard Working, Reliable, Ready to Learn and Friendly.

Broad knowledge base and experience in both the design and construction of oil and gas facilities. Forward thinking individual with the ability to take on many tasks at one time. Motivated leader focused on building strong professional relationships.

Project Engineering & Management

Near 13 years of professional work experience in the oil and gas industry, working experience on the on/off shore in Iran and extensive experience in oil and gas unit processing, reservoir engineering and well completion engineering.

Qualify E&I Site Supervisor, QA/QC Inspector, Project Coordinator, Project/Electrical Engineer and as well as Construction Manager. Excellent Documentation Skill for Project Management.

I am a Postgraduate Civil Engineer trained in "PROFESSIONALS IN PROJECT MANAGEMENT( PRIMAVERA 6.1 & MY PRIMAVERA)" FROM CADD CENTRE .I have both Bachelors and Masters Degree in Civil Engineering.My specialization in M.Tech was Construction Technology and management,.

More than 4 years of mechanical maintenance supervision experience, Business Analyst and Service Planner

I am doing job in wireline logging in H L S Asia Ltd in India on the post of an operator. I am doing independent cased hole and open hole jobs on onshore and offshore and driving LMV and HMV.

Experienced welder

A wide on-offshore range of experience in heavy equipment maintenance. Managing and supervising day-to-day preventive maintenance (P.M.) using a computerised maintenance management system. (C.M.M.S.) Modify equipment and machinery using management of change documentation (M.O.C.) to improve rel

Open Pit Slope Design, Tailings Dams, Plant Foundation Investigations, Earthworks

Design, Detailed Engineering, Engineering of DCS-Honeywell EPKS & Yokogawa Cenum CS. valve CV, Flow Element, PRV sizing. Foundation Fieldbus. FATof DCS. INTOOLS, InstruCALC, SPR. P&ID development. HSE member at FLUOR

5 years experience in piping stress analysis using CAESAR II in reputable companies

Problem solving analytical chemist with over five years gas chromatography and logistics experience in the research and development industry seeking a position as a chemist. Areas of interest include chromatography, sample preparation and logistics.

I am working as Process Engineer in Houston,TX with two years of experience in Oil & Gas Industry

Contract Safety and Construction Inspector for companies ,such as Conoco Phillips and Shell

I have had various roles within Document Control and administration sector including: Document Control, Expediting, HR & GA Officer, Project Co-coordinator, Project Secretary and Purchasing Officer.

Experienced in Construction of Offshore/Onshore Oil &Gas plants in the field of Fabrication, Installation, Hydrotesting & Pre-commissioning of In-plant/Well Head Piping and cross Country Pipe Line. Qualification: Bachelor of Engineering (Mechanical)

Petroleum Engineer having work experice for five years with a gians multinationals lioke Halliburton & Schlumberger in Reservoir & Production Engineering Areas

Experienced Senior Electricial Technician in oil refinery. Familiar with maintenance motors, transformers, generators and protection for the sames, frequency converters, power regulators, installing and programming PLCs etc.

I have skills, experience in maintenance work in the operations for resolving gas escapes and pipe repair work under strict deadlines. I am very interested in getting involved in operations. I am quick to learn, hardworking, could adapt to difficult situations and have strong team working skills

Chemical Engineering / Chemistry graduate from the University of Minnesota

Mechanical engineer-Masters-2 years experience as research assistant-proficient in development and usage of Finite element codes and packages-actively looking for a job.

The purpose of this resume is to define and highlights the skills and ability to work as a Planning Engineer. I secures 5 year of working exp. as Maint. Planning Engineer and Proj. Plan Engr. in Petroleum Refinery and for the const. of Pet.chem. & Steel Plant respectively.

B.S. CHEMICAL ENGINEERING UNIVERSIDAD METROPOLITANA, Caracas – Venezuela • Minor: “Oil/Gas & Petrochemicals, Production Engineering” • Graduation Date: February 2002 • GPA: 3.55 / 5.00 N°10 in 21 graduates.

• Excellent interpersonal skills • Excellent leadership abilities • Thorough individual with good analytical skills • MS Power Point presentation skills • 4 years experience spanning academia and industry

First Prev 151 [ 152 ] 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out