Resume - Experienced Oil and Gas HSE professional

Misco Jobs

Resume #83008

CONTACT INFORMATION:
View contact information...

Education:

Central Missouri State University
Master of Science – Industrial Safety
Bachelor of Science – Safety

Professional Experience:

CDX Gas LLC August 2006 – Present
Health Safety and Environmental Advisor
Coordinate safety and environmental activities for operations in five states
Coordinate environmental reporting for federal, state, and tribal regulatory agencies
Supervise environmental remediation projects as necessary
Monitor contractor safety performance and selection of contractors
Coordinate the development of the spill prevention control and counter measures program
Serve as a co-author of the first health, safety and environmental manual for CDX Gas.
Serve as Farmington region interim materials and fleet manager
Developing an operations and maintenance manual for a regulated pipeline in Arkansas

Northern Natural Gas September 03 – December 05
Senior Safety Analyst
Coordinated five regional emergency exercise drills each year.
Provided safety support service to the corporate emergency management response team
Administered the drivers training program for the Omaha office
Developed the first contractor safety handbook and training video.
Coordinated three safety procedure revision teams
Served on third party pipeline damage investigations
Developed training material on safety topics and conduct training classes
Assisted with the corporate pipeline public safety awareness program
Conducted contractor safety program reviews.
Served as the company asbestos coordinator

Roquette America, Inc. April 99 – September 02
Manager of Safety
Supervised a department comprised of one safety professional, five hourly employees and one security contractor in a wet corn milling facility
Reduced the OSHA recordable accident rate by approximately 50% over a two year period by increasing employee participation in the safety program
Conducted ergonomic surveys and coordinated ergonomic training for manual bag handling operations.
Coordinated the workers compensation program
Reorganized the in-house hazardous materials to respond to acid and class B poison releases

Wilbert Lee Gardner CSP

Assisted with the EPA's risk management plan development and implementation
Conducted industrial hygiene monitoring for dust, noise, and chemicals
Coordinated the annual employee wellness program
Implemented a computer based safety training program.

Phillips Petroleum Company October 93 – July 98
Senior Safety & Health Representative
Provided safety consulting services for onshore and offshore oil and gas production operations
Coordinated the Halon 1301 replacement program for ten staffed offshore platforms
Coordinated the annual piping inspection program for all regional facilities
Conducted API 510 pressure vessel inspections for all regional assets
Conducted naturally occurring radioactive material surveys
Facilitated the process hazard reviews for the Mineral Management Service required safety and environmental management programs.
Facilitated local and company sponsored safety audits for offshore operations.
Conducted industrial hygiene surveys for benzene and noise
Served on employee managed behavioral based safety program
Served as the fire protection coordinator for the Lafayette region

Clark Oil and Refining Corporation September 90 - November 92
Manager of Safety & Security
Managed a department consisting of three professionals and one contract security service in a 60,000 barrel per day sour crude refinery
Improved the refinery's safety record by 45% and reduced the workers compensation pay out by 51% over a two year period by utilizing employee participation.
Revitalized the safety training program
Assisted with the development of the company's process safety hazard analysis program
Coordinated the activities of a union/company safety committee
Improved the refinery's' fire protection and rescue capability through additional training for the operators and capital equipment acquisition.

EG&G Rocky Flats - Rockwell International February 89 – September 90
Senior Safety Engineer
Provided safety support services for a government owned nuclear materials processing operation.

Unocal Corporation November 83 - February 89
Fire and Safety Inspector
Provided general safety coverage to a 10,000 barrel per day kerogen refining facility and a 13,500 ton per day underground hard rock mine.

Related Information
Certified Safety Professional – Comprehensive Practice
Certified Safety Professional – Ergonomic Aspects
Professional Member - American Society of Safety Engineers
Advanced Communicator, Silver- Toastmasters International
Currently serving as Quality Toastmasters Club officer
------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5101 to 5150 of 10816)

Go to Search Parameters...

Brief Description

My Name is Asif Naeem &My Edgucation in Diploma of Mechanical Engeering&My exprience in Mechanical Techniction&Fabrication

landman

I offer extensive experience in construction and heavy industry in a wide range of roles and positions with a detailed theoretical and practical working knowledge of the following that I have developed over the previous 22 years of my career as both an OHS&E Professional and a team leader.

I am Electronics & Communication grad from India with more than 3 years of experience in Electrical & Instrumentation.I have through knowledge of SAP PM module.

Experienced Landman seeking a challenging work environment

BACKGROUND SUMMARY Over 10 years of experience in Piping, Structural, Mechanical, and Civil with experience in 3D modeling, CADWORX and drafting and designing refinery foundations.

Three years experience as an engineering tech, 10 years experience with data manipulation.

Inspection and laying of PE gas line in Mumbai for Mahanagar Gas Ltd (MGL) and Inspection of painting and coating of steel structures in offshore.

I am a geology masters student at Baylor University (May 2009 graduation). My training has included all of the basic geological branches with focus on sequence stratigraphy, depositional systems (both carbonate and clastic), and isotope geochemistry.

Snubbing / Workover Supervisor, Field Technician.

Senior Design Engineer - Electrical

I am 38 years old, good health and have 12 years solid experience on project management for several types of large, complex and fast track International projects.

Working Offshore as an engineer and mechanic for 15 years

PDS Piping designer Engineer

PLANNING ENGINEER: Liaison with Client, Consultant, Sub-contractors and Internal departments to get complete information on assignments for further instructions to Project Engineers. Conduct daily planning/production meetings with Site Manager/Project Engineers for discussing critical activities

Process Engineer in Refinery, Oil&Gas and Petrochemical Industries

Construction Mgr.- Piping Eng.

Senior Electrical Control Eng. / PLC Programmer / Scada System Specialist

Relay Protection coordination (by Captor software); motor starting, load flow, fault studies by ETAP software; DBs and MCCs selection; AFD selection and implementation; Frame6 power generation commisioning and maintenance; Switchgears up 110 kV commisioning and maintenance.

v A First class (60%) Bachelor of Chemical (B.E.) engineering graduate from Poona university in 1992, having a total (Cryogenic Air Separation/LNG Terminal & Regasification Unit /Refinery/Petrochemicals) industrial work experience of ~ 12 years.

aws cawi

PDS administration, Complete project setup and support on multiple large scale projects using PDS 7.2, 7.1,7.0 and 6.4 Microstation J/SE, PDS Piping specifications and RDB Support, Isogen setup and support, INTools support, SmartPlant Review Administration, and other 2D and 3D CAD tools.

Engineering / Construction Mgmt – Over 25 years combined experience supporting large domestic & international project assignments in both Home Office & Field locations. Business lines include Mining & Metals, Nuclear Power, Nuclear Waste Handling, & Refinery / Chemical (Oil / Gas, & Hydrogen) Plants

Industrial Journeyman Electrician-28 years

I have 18 years experience in the Oil Service Industry, involved in all aspects of Coiled Tubing, Nitrogen Services, Fluid Pumping, N2/He Leaktesting(HLD), Pipeline Pigging/Testing & Well Testing. My last permanent position was Service Supervisor II for Halliburton Coiled Tubing in Australia. Since

Experienced Senior Civil/Structural Designer with mostly Petro-Chem background

Present Bachelor of Petroleum and Natural Gas Engineering (Designing counstruction and exploitation of oil and gas pipelines,piping and storage facilities faculty )

Rotating Equipment Engineer

Chemical engineering degree in oil&gas field, experiance at project engineer and vice-project manager, control project, cost stimate, coordinate engineering desceplin, etc.

Senior technician instrument

I would like to announce my availability to any professional company in need of a Senior HSE Officer with an Engineering and Medical Degree. My vast experience and capabilities and the ability to get along with people will prove to be an asset to the company, client and workers. As a professional,

Linux, Ansoft designer, Auto CAD, C++ and Microsoft Office

MECHANICAL ENGINEER & QUALIFIED ASNT LEVEL II IN UT.RT,PT & MPT....

Welding inspector

Lease Acquisition

Dear Sir, I believe that I have the capabilities and the experience that enable me to match the requirements of this job. I have had a considerable experience in many companies and many domains.

Seeking challenging assignments as PDS Structural Designer and Senior Draughtsman with a reputed organisation in the Construction Industry.Based on my skills in Civil/Structural Designer Using Application PDS, SPR, AutoCAD, Microstation, I am confident that I would be a great addition to your team.

Apply for post of Electronics and Instrumentation engineering

i am graduate from electrical engineering and i,m good at computer . i have ability to work any time and any place

18 Years of experience in Electronics & Instrumentation field at supervisory level in Construction & Maintenance, including 3 ½ Years of Gulf Experience. Known for superior integrity, accommodative nature, sincere & honest team member.

In June 2003, I completed Diploma in Mechanical Engineering from M.S.University, and recently I passed NDT LEVEL II Examination from FLAWTECH INSPECTION SERVICES. And I have 3 years work experience in mechanical field.

strong drilling, geological, petrophysical, coring/core analysis, OH/CH log interpretation & reservoir studies background,worked with Halliburton,Reslab,QP & Schlumberger,Involve in Operations/Well Site/Petroleum Development,reservoir characterization,Image analysis, FMI/OBMI/MSD,Mentor &training

ROV Pilot/Technician with two years experience on workclass ROV

SKILLS: Pipefitting and related works.

drafting 3D and 2D modeling and design of some plans from field work, mechanical, structural in different applications such as Cadworxs P&ID 2009, Cadworx Plant 2009, Autocad 2008

Completions Engineer, Mechanical Engineer, Technical Sales Representative

Piping designer

Skilled in Electrical and Instrumentation Systems, associated with sensors, machines, electrical generating units and switchgear systems and programing and applications of PLC, DCS

Experienced Oil and Gas HSE professional

I am an Italian naval architect. I graduated from The University of Genoa specializing in Marine engineering and naval architecture

First Prev 101 102 [ 103 ] 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out