Resume - Design, Detailed Engineering, Engineering of DCS-Honeywell EPKS & Yokogawa Cenum...

Misco Jobs

Resume #83187

CONTACT INFORMATION:
View contact information...

PROFESSIONAL EXPERIENCE: (of 5 Years stated as under)

„« Worked as Associate Control Systems Engineer at Fluor Daniel India Pvt. Ltd; from December 2007 to March 2009.
Working on Unified Hydrocracker Unit of Valero Refining project; Valero Refining Company Inc. USA.
Job activities include working on SPI 7.0 (INTOOLS) for development of Instrument Index, updating of Process Data Module, Specification sheets and subsequent Quality Compliance checks. Markups in P&IDs as per change notifications.
Preparation of Go-By Datasheets for Off-line Instruments with SIL 3 ratings (DP type FT, PT, DP type LT & PDT)
Sizing of Flow Elements using INSTRUCALC.
Preparation of RFQ packages for instrument commodities, offer evaluations & Technical Bid Evaluations.
Preparation of Level Sketches; Calculation of Calibration ranges for DP Type LTs.
Reviewing of instrument location plan in SPR.

„« Worked as Senior Design Engineer (C&I) at Fichtner Consulting Engineers (India) Pvt. Ltd; from April 06 till December 2007.

2 x 15 MW CPP for Associated Cement Companies (ACC) Ltd.
Activities Included Involvement in Basic Engineering such as P&ID development, freezing of loop schematics (Interrogation voltage looping for digital I/Os), DCS configuration finalization, I/O summary & controller nest loading.
Development of Control Room Layout in consultation with Mech/ Elec/ Civil Dept.
Selection & preliminary sizing of Control Valves & Flow elements.
Attending of bid meetings with various DCS vendors, offer evaluation, Scope Clarification & Scope change (wherever required).
Post order placement work included I/O allocation, wiring scheme review, hardware design review, BOQ checks & development of operating station graphic pages

Worked as a subordinate engineer for 3 x 30 MW Captive Co-gen TPP for Utkal Alumina International (a joint venture of Aditya Birla Group & Alcan International, Canada).
This project (of 30,000 man hours) with ~10,000 I/Os had Fieldbus Technology (FF H1) for communication at field level.
The plant incorporated FF Technology for analog parameters and conventional (point-point) wiring scheme for digital parameters.

Worked (midway) for 1 x 25 MW CPP for ACC Ltd; Lakheri.
Activities included preparation of Junction Box Schedule, Installation Drawings, JBs/ LCPs & main cable routing, Cable Schedule, Wiring & Termination Schedule.
DCS relevant work included DCS I/O list preparation, Logic Diagrams, Loop drawings, HMI Graphics, HDM/ SDM approval, review meetings & FAT at Honeywell, Pune, India.
The plant was successfully commissioned in March 07.

„« Worked as Project Engineer at McClelland Engineers Pvt. Ltd; India from August 04 to April 06.
Herein as an Instrumentation engineer, I had the opportunity to work on the EPC project of Hazardous Waste Incinerator facility at TATA STEEL, Jamshedpur; of 3 TPH capacity.

The office activities included: -
* Studying P & ID, Instrument Layout Drawing and preparation of Instrument Index.
* Preparation of Instrument specifications, Logic Diagrams, Loop Drawings & PLC I/O List.
* Floating of enquiries, receiving vendor offers, preparation of Bid Evaluation Reports for Field Instruments, Analytical Instruments (CO/ O2, SPM & pH).
* Preparation of Hook up Drawings, Cable schedule & Interconnection schedule.
* Conducted FAT of Allen Bradley, Flex Logix PLC & RS VIEW 32 SCADA).

Site activities (for erection, commissioning & handover) included:-
* Working in a multi disciplinary & experienced project team in co-ordination with the TATA STEEL, Cold Rolling Mill (CRM) Utility department.
* Installation, calibration & commissioning of field instruments such as switches, transmitters, control valves, Motor operated valves (MOVs) & Analytical Instruments.
* Installation, testing & commissioning of UPS, VFD, MCC, Multi-stage burners & PLC.
* Coordinating in electrical activities such as cable routing to/ from PLC/ JBs/ LPBS/ MCC/; cable termination & loop testing.
* Safety supervision as per safety standards of TATA STEEL for all the activities at site.
* Preparation of work schedule/ bar charts & progress reports.
* Follow up for the delivery of material/ equipment required as per the work schedule to ensure the material availability in the scheduled time at site.

TECHNICAL SKILLS:

* Hands on experience in SPI 7.0 (INTOOLS) & Smart Plant Review (SPR).
* Experience on sizing & selection of Control valve (as per ISA75.01) & Flow elements (ISO 5167).
* Working Knowledge of DCS of Honeywell (Experion PKS) & Yokogawa (Centum CS). Performed FAT (twice) of Honeywell EPKS at HAIL, Pune, India.
* Experience of Foundation Fieldbus (system side) attained through project involvement, IEC-61158-2 & attending of seminars/ presentations.
* Familiarity with C&I relevant standards such as ISA & IEC.
* Well versed with methods of serial communication and their protocols.
* HSE member at Fluor India.

EDUCATIONAL QUALIFICATIONS:
Degree Year Institute University / Board Percentage
B.E. in
Instrumentation 2004 A.C.Patil College of
Engineering, Navi Mumbai. Mumbai 63.57 %
H.S.C. 2000 G.N. Khalsa College,
Mumbai. Maharashtra State Board 72.00%
S.S.C 1998 S.T. Mary's High School,
Kalina, Mumbai Maharashtra State Board 70.13 %

PERSONAL DETAILS:
Date of Birth: 3rd July 1982
Nationality: Indian
Marital Status: Single

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7551 to 7600 of 10917)

Go to Search Parameters...

Brief Description

I'm mechanical engineer, I also have a mention in petroleum engineer, I did my practices in companies such as Repsol YPF, Pacifpetrol S.A, and I did visited Weatherford to get information for my thisis of degree.

Having Diploma(3 years) in Instrumentation Engineering with 8 years Exp. in Oil/Gas field (Offshore / Onshore) projects, commissioning, maintenance.

IM Supervisor, DM Manager, Expediter, Technical Writing skills in authoring procedures, Business Development with Green conceptual ideas

I have over thirty years experience working in the oil, gas & petrochemical industries on the maintenance, construction & commissioning of various rotating & mechanical equipment. The positions I have held have been hands on and supervisory, in both the UK and overseas, working onshore and offshore.

I am interested in working for your organization. Presently I am employed at Sultanate of Oman. My responsibilities are Vessel berth assignments for the Container Ships, Bulk Cargo Ships, Passenger Ships, Oil and LPG Tankers calling in Port. My responsibilities also include Plan, Manage and Monitor

Mechanical Engineer - Rotating Equipment Engineer

A results-focused manager and leader who drives project teams to deliver outstanding results. Professional Engineer with 21 years of diverse experience in the hydrocarbon processing and minerals processing industries. Has exceptional experience on owner & EPCM teams.

Heavy Industrial Fitter with extensive experience on Fixed & Mobile Plant & Machinery. I have worked in Cross Cultures as a Mechanical Trainer/Supervisor.

i am a qualified Chemical and petroleum engineer with a masters degree, with upto 2 years experience in the exploration and production sector of the oil and gas field both in the field and design while using various softwares.

Geodetic Engineer exposed to various types of horizontal and vertical survey and can handle different geodetic engineering position.

Qualifications: Teesside University: 1st Year HNC Instruments, Cleveland College: BTEC National Cert Engineering, BTEC First Cert Engineering.

Strong engineering management and design background with a broad range of skills including: construction management, process plant design, subcontractors management, mechanical equipment specifications, project controls, material handling design including barge loading and unloading, AutoCAD

Geologist / Geotechnical engineer

Piping Field Planner/Engineer through 15 plus years journeyman experiece in the industrial construction industry.

Over six years of experience in geotechnical engineering including earthquake engineering and mining engineering. Has performed numerous analyses in ground deformation, lateral spread and foundation settlements caused by static and seismic loading using both traditional analytical methods and advanc

Hands on experience in USA chemical industries,environmental field, Groundwater Remediation , Industrial wastewater treatment , engaged in wide variety of environmental , chemical analysis .

Qualified and certified electrician, intensive troubleshooting skills

Production engineer, with strong knowledge in Rod Pumping, ESP, Gas Lift and softs related. Also production and inyection follow-up, project evaluation. Additionally experience in managment and operation.

20+ years of experience working in Materials Management, Inventory Control, Materials Planning Scheduling & Logistics, in both home office and field site locations on the construction of large petrochemical plants, natural gas plants, electrical power plants, and mining facilities.

Creating the Spool drawings for fabrication purpose using the Spoolgen Software.Input Files Taken from PDS, the Output is generated in Microstation,Checking the Generated Drawings & Documentation preparation.

Experience: Contract Management: Lining up contacts, Qualification: M.Tech.

Civil Engineer. Developing the 40 + retail outlet fro IOCL.IBP, Essar Oil in India.

B.E(mech) working in oil drilling rig of company "Nafta Pila" as HSE officer

Fresh Graduate and willing to work hard

I graduated from SAIT with a certificate in Process Piping Drafting awarded in September 2007. Through this program I gained knowledge in Natural Gas Processing, Piping Design, Plant equipment and Instrumentation. I have also had hands on training with AutoCAD, Microstation, ProCAD and 3dSmart.

Hard Working, Reliable, Ready to Learn and Friendly.

Broad knowledge base and experience in both the design and construction of oil and gas facilities. Forward thinking individual with the ability to take on many tasks at one time. Motivated leader focused on building strong professional relationships.

Project Engineering & Management

Near 13 years of professional work experience in the oil and gas industry, working experience on the on/off shore in Iran and extensive experience in oil and gas unit processing, reservoir engineering and well completion engineering.

Qualify E&I Site Supervisor, QA/QC Inspector, Project Coordinator, Project/Electrical Engineer and as well as Construction Manager. Excellent Documentation Skill for Project Management.

I am a Postgraduate Civil Engineer trained in "PROFESSIONALS IN PROJECT MANAGEMENT( PRIMAVERA 6.1 & MY PRIMAVERA)" FROM CADD CENTRE .I have both Bachelors and Masters Degree in Civil Engineering.My specialization in M.Tech was Construction Technology and management,.

More than 4 years of mechanical maintenance supervision experience, Business Analyst and Service Planner

I am doing job in wireline logging in H L S Asia Ltd in India on the post of an operator. I am doing independent cased hole and open hole jobs on onshore and offshore and driving LMV and HMV.

Experienced welder

A wide on-offshore range of experience in heavy equipment maintenance. Managing and supervising day-to-day preventive maintenance (P.M.) using a computerised maintenance management system. (C.M.M.S.) Modify equipment and machinery using management of change documentation (M.O.C.) to improve rel

Open Pit Slope Design, Tailings Dams, Plant Foundation Investigations, Earthworks

Design, Detailed Engineering, Engineering of DCS-Honeywell EPKS & Yokogawa Cenum CS. valve CV, Flow Element, PRV sizing. Foundation Fieldbus. FATof DCS. INTOOLS, InstruCALC, SPR. P&ID development. HSE member at FLUOR

5 years experience in piping stress analysis using CAESAR II in reputable companies

Problem solving analytical chemist with over five years gas chromatography and logistics experience in the research and development industry seeking a position as a chemist. Areas of interest include chromatography, sample preparation and logistics.

I am working as Process Engineer in Houston,TX with two years of experience in Oil & Gas Industry

Contract Safety and Construction Inspector for companies ,such as Conoco Phillips and Shell

I have had various roles within Document Control and administration sector including: Document Control, Expediting, HR & GA Officer, Project Co-coordinator, Project Secretary and Purchasing Officer.

Experienced in Construction of Offshore/Onshore Oil &Gas plants in the field of Fabrication, Installation, Hydrotesting & Pre-commissioning of In-plant/Well Head Piping and cross Country Pipe Line. Qualification: Bachelor of Engineering (Mechanical)

Petroleum Engineer having work experice for five years with a gians multinationals lioke Halliburton & Schlumberger in Reservoir & Production Engineering Areas

Experienced Senior Electricial Technician in oil refinery. Familiar with maintenance motors, transformers, generators and protection for the sames, frequency converters, power regulators, installing and programming PLCs etc.

I have skills, experience in maintenance work in the operations for resolving gas escapes and pipe repair work under strict deadlines. I am very interested in getting involved in operations. I am quick to learn, hardworking, could adapt to difficult situations and have strong team working skills

Chemical Engineering / Chemistry graduate from the University of Minnesota

Mechanical engineer-Masters-2 years experience as research assistant-proficient in development and usage of Finite element codes and packages-actively looking for a job.

The purpose of this resume is to define and highlights the skills and ability to work as a Planning Engineer. I secures 5 year of working exp. as Maint. Planning Engineer and Proj. Plan Engr. in Petroleum Refinery and for the const. of Pet.chem. & Steel Plant respectively.

B.S. CHEMICAL ENGINEERING UNIVERSIDAD METROPOLITANA, Caracas – Venezuela • Minor: “Oil/Gas & Petrochemicals, Production Engineering” • Graduation Date: February 2002 • GPA: 3.55 / 5.00 N°10 in 21 graduates.

First Prev 151 [ 152 ] 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out