Resume - SKILLS: Pipefitting and related works.

Misco Jobs

Resume #83215

CONTACT INFORMATION:
View contact information...

Position Applied: Piping QC
Second Applied: Piping Foreman

OBJECTIVE:

Empowerment of knowledge and endless exploration through proper learning and experience.

EMPLOYMENT RECORD:
SAIPEM FARM Project

Project: CHEVRON FARM ( Flare And Releif Modification) PROJECT Takula and Malonggo Area
Cabinda Gulf Oil
Position: Piping Foreman
Address: Cabinda Gulf Oil Angola
Inclusive date: January 26, 2009 up to present
Vessel: African Caribe

Job Description:

¡ñ Familiarize the project location due to project plan.
from general plan and P and I.D.
¡ñ Proper coordination of all high staff committee.
¡ñ monitoring of all materials according to drawing.
¡ñ Advance program at least one week before
To prevent production delayed.
¡ñ Good and proper hand over of drawing ort document for the continuing production for the next shift.
¡ñ Listing and recording the daily report such as:
▪ Manpower status
▪ Production
▪ Progress
¡ñ Monitoring of all production progress and hand over to the quality control department for immediate line checking.
¡ñ Daily Safety meeting prevent unsafe action.

EEI Corporation

Project: Petron Bataan Refinery Expansion Project-"B"
Position: Piping QC
Address: Brgy. Limay, Bataan Philippines
Inclusive Date: June 11, 2008 to January 15, 2009

Job Description:

¡ñ Familiarize the project location due to project plan.
from general plan and P and I.D.
¡ñ Proper coordination of all high staff committee.
¡ñ monitoring of all materials according to drawing.
¡ñ Advance program at least one week before such as material needs and tool's
To prevent production delayed.
¡ñ Good and proper hand over of drawing ort document for the continuing production for the next shift.
¡ñ Listing and recording the daily report such as:
▪ Manpower status
▪ Production
▪ Progress
¡ñ Monitoring of all production progress and hand over to the quality control department for immediate line checking.
¡ñ Daily Safety meeting prevent unsafe action.

IREM SPA Saudi Arabia Ltd. Project

Project: OLEOFINS PROJECT COMPANY 2238
Yanbu National Petrochemicals Company (YANSAB)
And Saudi Basic Industry Corporation
Position: Piping Foreman
Address: P.O Box 3164 Yanbu Al Sinaiyah K.S.A
Inclusive date: April 2, 2007 to May 21, 2008

Job Description:

¡ñ Familiarize the project location due to project plan.
¡ñ from general plan and P and I.D.
¡ñ Proper coordination of all high staff committee.
¡ñ Checking and arrangement of all documents and drawing before distribution to the pipe fitter.
¡ñ monitoring of all materials according to drawing.
¡ñ Advance program at least one week before such as material needs and tool's
To prevent production delayed.
¡ñ Good and proper hand over of drawing ort document for the continuing production for the next shift.
¡ñ Listing and recording the daily report such as:
▪ Manpower status
▪ Production
▪ Progress
¡ñ Monitoring of all production progress and hand over to the quality control department for immediate line checking.
¡ñ Daily Safety meeting prevent unsafe action.

EEI Corporation

Project: Petron Bataan Refinery Expansion Project-"B"
Position: Piping Foreman
Address: Brgy. Limay, Bataan Philippines
Inclusive Date: August 28, 2006 to March 27, 2007

Job Description:

¡ñ Familiarize the project location due to project plan.
¡ñ from general plan and P and I.D.
¡ñ Proper coordination of all high staff committee.
¡ñ Checking and arrangement of all documents and drawing before distribution to the pipe fitter.
¡ñ monitoring of all materials according to drawing.
¡ñ Advance program at least one week before such as material needs and tool's
To prevent production delayed.
¡ñ Good and proper hand over of drawing ort document for the continuing production for the next shift.
¡ñ Listing and recording the daily report such as:
▪ Manpower status
▪ Production
▪ Progress
¡ñ Monitoring of all production progress and hand over to the quality control department for immediate line checking.
¡ñ Daily Safety meeting prevent unsafe action.

Samsung Engineering & Construction Co., Ltd.

Project: Formosa Industrial Project
Position: Piping QC
Address: Mai Liao County, Yun Lin Province
Taiwan R.O.C
Inclusive Date: July 6, 2005 to August 12, 2006

Job Description:

¡ñ Familiarize the project location due to project plan.
from general plan and P and I.D.
¡ñ Proper coordination of all high staff committee.
¡ñ monitoring of all materials according to drawing.
¡ñ Advance program at least one week before such as material needs and tool's
To prevent production delayed.
¡ñ Good and proper hand over of drawing ort document for the continuing production for the next shift.
¡ñ Listing and recording the daily report such as:
▪ Manpower status
▪ Production
▪ Progress
¡ñ Monitoring of all production progress and hand over to the quality control department for immediate line checking.
¡ñ Daily Safety meeting prevent unsafe action.

EEI-AL Rushaid Construction Co. Ltd.

Project: BI 3150 Ethane and NGL Recovery Project
Berri Gas Plant, Jubail, K.S.A.
Position: Pipefitter
Address: Jubail, K.S.A.
Inclusive Date: April 27,2001 to June 30,2005

Job Description:

* Prepare the necessary tools like tape measure, chalk, and square level, center pile, air grinder, piping tools and the plan.

* Prepare the pipe according to size and cut straight then put bevel, grind bevel smoothly.

* To first and align the pipes, valves and other accessories related to piping on power, gas, oil, water tank and air piping system; layout and fabrication of pipes to fit on particular job; erecting the pipes and its related items for piping system both vertically and horizontally on its correct elevation and location based on specific drawing.

* Repair fabrication and installation of branch piping on vessel both inside and outside location assist in the accomplishment of assigned work by the immediate superior.

* Apply internal pipe coating based on the desired thickness with its interval hour application knows the safety rules and regulation on the refinery works.

EEI Corporation

Project: Petrochemical Mitsubishi Heavy Industry
Position: Pipefitter
Address: Simlong, Batangas City Philippines
Inclusive Date: May 20, 2000 to Dec. 30, 2000

Job Description:

* Prepare the necessary tools like tape measure, chalk, and square level, center pile, air grinder, piping tools and the plan.

* Prepare the pipe according to size and cut straight then put bevel, grind bevel smoothly.

* To first and align the pipes, valves and other accessories related to piping on power, gas, oil, water tank and air piping system; layout and fabrication of pipes to fit on particular job; erecting the pipes and its related items for piping system both vertically and horizontally on its correct elevation and location based on specific drawing.

* Repair fabrication and installation of branch piping on vessel both inside and outside location assist in the accomplishment of assigned work by the immediate superior.

* Apply internal pipe coating based on the desired thickness with its interval hour application knows the safety rules and regulation on the refinery works.

EDUCATIONAL BACKGROUND:

Primary Aplaya Elementary School 1986-1992 Graduate
Aplaya Pila, Laguna
Secondary Liceo de Pila 1992-1996 Graduate
Pila, Laguna

College AMA Computer College 1997-2000 Undergraduate
Sta. Cruz, Laguna

Course BS Computer Engineering

TRAININGS AND SEMINARS ATTENDED:

BOSIET ( Basic Offshore Safety Induction and Emergency Training )

Training Center: CTSI Consolidated Training System Inc.
Place: Cavite, Philippines
Date: Nov. 17, 2008 to Nov. 19, 2008

BST ( Basic Safety Training )

COURSES:PST Personal Survival Techniques
BFF Fire Prevention and Fire Fightine
EFA Elementary First Aid
PSSR Personal Safety and Social Responsibility

Training Center: TMTCP The Maritime Training Center of the Philippines Place: Ermita, Manila Philippines
Date: Nov. 3, 2008 to Nov. 12, 2008

5 STAR Training ( LIS ) Leadership is Safety

Instructor: Peter Gallagher
Company: ENI Saipem
Vessel: African Caribe
Date: May 18, 2009

COSHH Training

Instructor: J. Mallett
Vessel: African Caribe
Date: Feb. 22, 2009

IIF Incident and Injury Free

Company: JMJ
Vessel: African Caribe
Date: Feb. 03, 2009

H2S Hydrogen Sulfide Awareness

Instructor: Troy Beason
Company: Falck Alford
Vessel: African Caribe
Date: Jan. 27, 2009

SKILLS: Pipefitting and related works.

PERSONAL DATA:
Expiration: February 19, 2006 ¨C February 19, 2012
Place Issue: DFA Manila
BOSIET: Nov. 19, 2008 to Nov. 18, 2012
Date of Birth: February 17, 1979
Place of Birth: Jala-jala, Rizal
Age: 30
Sex: Male
Height: 5'9"
Weight: 70 kgs.
Hobbies: Reading books, magazines & playing basketball

All supporting documents are available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5151 to 5200 of 10917)

Go to Search Parameters...

Brief Description

Process Engineer in Refinery, Oil&Gas and Petrochemical Industries

Construction Mgr.- Piping Eng.

Senior Electrical Control Eng. / PLC Programmer / Scada System Specialist

Relay Protection coordination (by Captor software); motor starting, load flow, fault studies by ETAP software; DBs and MCCs selection; AFD selection and implementation; Frame6 power generation commisioning and maintenance; Switchgears up 110 kV commisioning and maintenance.

v A First class (60%) Bachelor of Chemical (B.E.) engineering graduate from Poona university in 1992, having a total (Cryogenic Air Separation/LNG Terminal & Regasification Unit /Refinery/Petrochemicals) industrial work experience of ~ 12 years.

aws cawi

PDS administration, Complete project setup and support on multiple large scale projects using PDS 7.2, 7.1,7.0 and 6.4 Microstation J/SE, PDS Piping specifications and RDB Support, Isogen setup and support, INTools support, SmartPlant Review Administration, and other 2D and 3D CAD tools.

Engineering / Construction Mgmt – Over 25 years combined experience supporting large domestic & international project assignments in both Home Office & Field locations. Business lines include Mining & Metals, Nuclear Power, Nuclear Waste Handling, & Refinery / Chemical (Oil / Gas, & Hydrogen) Plants

Industrial Journeyman Electrician-28 years

I have 18 years experience in the Oil Service Industry, involved in all aspects of Coiled Tubing, Nitrogen Services, Fluid Pumping, N2/He Leaktesting(HLD), Pipeline Pigging/Testing & Well Testing. My last permanent position was Service Supervisor II for Halliburton Coiled Tubing in Australia. Since

Experienced Senior Civil/Structural Designer with mostly Petro-Chem background

Present Bachelor of Petroleum and Natural Gas Engineering (Designing counstruction and exploitation of oil and gas pipelines,piping and storage facilities faculty )

Rotating Equipment Engineer

Chemical engineering degree in oil&gas field, experiance at project engineer and vice-project manager, control project, cost stimate, coordinate engineering desceplin, etc.

Senior technician instrument

I would like to announce my availability to any professional company in need of a Senior HSE Officer with an Engineering and Medical Degree. My vast experience and capabilities and the ability to get along with people will prove to be an asset to the company, client and workers. As a professional,

Linux, Ansoft designer, Auto CAD, C++ and Microsoft Office

MECHANICAL ENGINEER & QUALIFIED ASNT LEVEL II IN UT.RT,PT & MPT....

Welding inspector

Lease Acquisition

Dear Sir, I believe that I have the capabilities and the experience that enable me to match the requirements of this job. I have had a considerable experience in many companies and many domains.

Seeking challenging assignments as PDS Structural Designer and Senior Draughtsman with a reputed organisation in the Construction Industry.Based on my skills in Civil/Structural Designer Using Application PDS, SPR, AutoCAD, Microstation, I am confident that I would be a great addition to your team.

Apply for post of Electronics and Instrumentation engineering

i am graduate from electrical engineering and i,m good at computer . i have ability to work any time and any place

18 Years of experience in Electronics & Instrumentation field at supervisory level in Construction & Maintenance, including 3 ½ Years of Gulf Experience. Known for superior integrity, accommodative nature, sincere & honest team member.

In June 2003, I completed Diploma in Mechanical Engineering from M.S.University, and recently I passed NDT LEVEL II Examination from FLAWTECH INSPECTION SERVICES. And I have 3 years work experience in mechanical field.

strong drilling, geological, petrophysical, coring/core analysis, OH/CH log interpretation & reservoir studies background,worked with Halliburton,Reslab,QP & Schlumberger,Involve in Operations/Well Site/Petroleum Development,reservoir characterization,Image analysis, FMI/OBMI/MSD,Mentor &training

ROV Pilot/Technician with two years experience on workclass ROV

SKILLS: Pipefitting and related works.

drafting 3D and 2D modeling and design of some plans from field work, mechanical, structural in different applications such as Cadworxs P&ID 2009, Cadworx Plant 2009, Autocad 2008

Completions Engineer, Mechanical Engineer, Technical Sales Representative

Piping designer

Skilled in Electrical and Instrumentation Systems, associated with sensors, machines, electrical generating units and switchgear systems and programing and applications of PLC, DCS

Experienced Oil and Gas HSE professional

I am an Italian naval architect. I graduated from The University of Genoa specializing in Marine engineering and naval architecture

Bachelor in Chemical Engineering (Co-op option) (University of Ottawa, Canada) Hard worker, enthousiastic.

Major Course Work: Process Heat Transfer, Chemical Engineering Plant Design I, II, and III, Kinetics and Reactor Design, Process Dynamics and Control, Mass Transfer, Unit Operations, and Chemical Economics and Design

Exp.Mechanical & construction manager in Oil & gas , more that 26 years of work with big oil companies.High educated with MSc in Mechanical and offshore engineering from Robert gordon Uni /Uk.

7.5+ years of Control System Enineering experience with Global Control System leaders(INVENSYS-TRICONEX IPS/FGS,YOKOGAWA Prosafe ,CS3000,HIMA-IPS,EMERSON-DELTA V Systems)

As a Instrument supervisor to lead the work crew and holding the responsibility to complete the job with standard ¡§HSE¡¨ practices as per the strict ¡¥Shell¡¦ safety norms of Petroleum Development of Oman. And also involved in Installation, calibration, loop checking, Pre commissioning, etc..

Cementing Engineer

holding 3 yrs diploma in hotel management and catering technology with more than 8 yrs exp. in catering field

Working in QA/QC

Currently working in the North Sea as a Slickline Supervisor on an Ad-Hoc basis.

PDS &piping drafter

B.Tech Chem engg + MBA (marketing) with 10+ years in Project Management in O&G / Petrochemical Projects

QUALIFICATIONS : M.Sc. (Geology), Skill : Geologist, Mudlogger, Geotechnical Engineer

Good knowledge of Environmental Impact Assessment (EIA), HAZOP, Risk Assessment, Safety Audit, Environmental Audit, & Various Safety Techniques Like; International Safety Rating System (ISRS)-By DNV, Process Safety Management (PSM) etc.

Graduated Mechanical Engineer,Certified Caterpillar Engineer, Experience as a Field Engineer in the Gas & oil, Marine,Mining Industry

13 years of Experience in DCS System, PLC & ESD system as well as field instrumentation.

First Prev 101 102 103 [ 104 ] 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out