Resume - 17+ years, FEED, Engineering, Fabrication, Construction, Commissioning. Brownfie...

Misco Jobs

Resume #83281

CONTACT INFORMATION:
View contact information...

SENIOR PROJECT ENGINEER

DATE OF BIRTH: 4 December 1965
NATIONALITY: Australian / New Zealand Resident
FAMILY: Married 15 years, 3 children aged 10, 8 and 5
EDUCATION AND QUALIFICATIONS: B.E. (Mechanical), University of Canterbury, New Zealand, 1992
N.Z.C.E. (Mechanical), AAVA, New Zealand, 1990

KEY EXPERIENCE
Very wide range of experience in the project engineering, fabrication and construction industries, coupled with good understanding of commercial realities through hands-on experience.
Progresses work and resolves problems in a timely and efficient manner.
Excellent interpersonal and communication skills, and is a self-starter. Takes charge and makes decisions; is a good leader of teams.
Strong understanding of and belief in the need for proper project process and quality systems, and the value attained by these.
AREAS OF PARTICULAR EXPERTISE
* Decisive and able to drive progress – to 'get things done'.
* Able to understand a wide range of issues, and the courage to challenge them when required.
* Very good at analysing information, with a strong entrepreneurial perspective (vision for opportunities, and intuitive insight).
* Excellent written and verbal communications.
* Broad multidiscipline engineering knowledge, and able to relate to a wide range of trades, suppliers, contractors and client personnel.
RELEVANT TRAINING
* Transfield Worley New Zealand, "Team Leadership and Development", 2004.
* Steven O'Connor / DiLIGENZ, "Principles of Petroleum Exploration, Development & Production", 2005.
* Management Learning Associates, "Excellence in Customer Service", 2006.
* Institute of Professional Engineers New Zealand / University of Auckland, "Professional Communications for Engineers – Effective Report Writing", October 2006.
* Shell Project Academy, "Essentials of Project Management", December 2008 (pass with distinction, and highest mark of 700+ participants (97.75%)).

REFEREE
Will be provided

PROFESSIONAL EXPERIENCE
May 2007 – Present
Brunei Shell Petroleum
Project Engineer
Employed at the Brunei LNG facility in the EPO projects department, working on predominantly front-end engineering for CAPEX projects:
Projects undertaken include:
* OCP Fuel Gas Skid Upgrade. Fast-track project, intended to resolve significant risk of MCHE tube damage due to sudden trip of Champion gas compression facility. First-pass estimate BND3-4M.
* MCR Recovery. Fast-track project also just started, with premise to minimise loss of inventory to flare and improve refrigerant make-up control. First-pass estimate BND3M.
* Sand Bed Filter Rejuvenation. Legacy project with original brief to execute as a like-for-like rejuvenation, but entire front-end is being revisited to ensure opportunities are properly defined and agreed. Current anticipated scope approximately BND15M.
* N2+IA Upgrade. Assisted technical department with study work, and helped identify early opportunities with the EAP air compressor replacement project. Project put on hold when technical department could no longer expedite the study due to resource constraints.
* Sundyne Pumps Modifications. Legacy project with poorly define premise, which was successfully challenged with subsequent scope change. Currently re-engineering detailed design, with budget to be revalidated.
Provide guidance and assistance to development project engineers. Assist with general understanding of project processes within the EPO/2 group.

April 2004 – May 2007
Transfield Worley Limited
Senior Project Engineer
Employed within the Major Projects group to provide project management support:
Projects undertaken include:
Shell Todd Oil Services (STOS), Kapuni Wellsites
KA-8/15 Wellsite Compression, April 2004 - May 2006
* Manage and control of the project team overall to achieve the project goals and objectives in an effective and efficient manner.
* Actively explored opportunities to reduce cost and / or time and increase benefit to project owners.
* Support the Project Manager to maintain a quality overview of the project based on, and complying with the Project Execution Plan.
* Report on behalf of the Project Manager, via regular bi-weekly meetings and monthly written reports, to the STOS Project Coordinator on all aspects of the project.
* Issue revised or new project documents if required and manage the design change process.
* Control and manage the project schedule, progress reporting and cost control activities.
* Co-ordinate and perform pre-commissioning and live commissioning activities, in conjunction with the Client's Operations and Maintenance personnel.
VECTOR, Kapuni Gas Treatment Plant
CAPEX and OPEX Projects, May 2006 – May 2007
* Manage small and medium projects, including FEED and Execution phases.

2002 – April 2004
Fitzroy Engineering Group Ltd, New Plymouth
Project Engineer
Employed as a project engineer for heavy fabrication projects.
Projects undertaken include:
Comalco, Queensland, Australia
Fabrication of 57 Pressure Vessels for the Comalco Alumina Refinery Project, August 2002 to January 2004
* Purchasing engineer for all bulk items including tendering, tender evaluation, negotiations, award, progress monitoring, documentation and technical matters. Worked together with Procurement Manager to ensure all materials were delivered on time and within budget despite changing client requirements. Items include basic material (boiler / structural plate, piping, forgings etc) and pre-fabricated componentry (pressure heads, non-standard flanges, hard-faced components, heavy-wall pressings etc).
* Project Engineer for Construction Pad area and responsible for fabrication of 22 pressure vessels. Includes managing various fabrication sections, liaison with designers, progress monitoring, problem solving.
Contact Energy, Hawkes Bay
Whirinaki Power Station Re-Build, February - April 2004
* Construction Engineer for on-site fabrication. Included aspects of design, purchasing, fabrication, installation and commissioning for various systems supporting this diesel-fired gas turbine installation.

1998 - 2002
Own Business

1994 - 1997
Beca Simons Ltd, Auckland
Project Engineer
Employed as a project engineer for process/ mechanical projects. Work encompassed all aspects of project and design engineering. Was also trained and approved as an internal (Beca Group) Quality Assurance Systems auditor (ISO 9001).
Projects undertaken include:
Tasman Pulp and Paper Co. Ltd, Kawerau
Effluent Solids Dewatering Project, 1994
* Preparation of specifications for tanks and agitators for new plant, including tendering, tender evaluation, award and progress monitoring.
White Liquor Storage Tank, 1994 - 1995
* Preparation of EPC specification and tender for new Duplex Stainless Steel tank, and material supply specification. Work included pre-qualification of tenderers, evaluation and recommendation.
* Coordination of piping and mechanical detailed design.
PT International Nickel Indonesia, Soroako, Sulawesi, Indonesia
Dryer 1 Off-Gas Cleaning System, 1995 - 1997
* EPCM project. Role as Senior Project (Lead) Engineer.
* Preparation of specifications for mechanical equipment including tendering, tender evaluation, award and progress monitoring.
* Coordination and engineering for mechanical detailed design. Interdisciplinary coordination and project management.
Dryer 2 Off-Gas Cleaning System, 1997
* EPCM project, similar to Dryer 1 project (above) except physically larger. Promoted to Project Manager for this project.
* Project put on hold during scoping and preliminary design phase, due to client freeze on new project budgets.

1993 – 1994
Methanex (NZ) Ltd, New Plymouth
Mechanical Engineer
Formerly Petralgas Chemicals (NZ) Ltd and Synthetic Fuels Corporation. Merger took place shortly after re-commencing full-time work.
Returned to the Technical Department as a mechanical engineer, after 2 years study at University through a Petralgas internal scholarship.
Projects undertaken include:
* Conducted investigation into annular plate corrosion on methanol storage tanks at Port Taranaki. Prepared report for submission to management.
* Detailed design of a steam vent silencer to reduce plant noise emissions.
* Preliminary engineering of a deluge system for fire protection of the distillation plant. Later involved in commissioning of finished system for hand-over to the Operations Department.
* Preparation and planning of piping modifications for the 1994 Waitara Valley Shutdown. Included investigation, detail design, specification preparation, tender evaluation and negotiations. During shutdown performed supervision and coordination roles.

1991 – 1992
University Of Canterbury, Christchurch
Direct Entrant – Years 3 & 4

1987 – 1991
Petralgas Chemicals (NZ) Ltd, Waitara
Piping / Mechanical Design Draughtsman
A methanol production plant located in the Waitara Valley, Taranaki. Recruited into the Technical Department and involved in plant improvements and additions.
Projects undertaken include:
* Specification preparation, tender and supervision of 24" line replacement.
* Design and draughting of platforms for existing vessels. Supervision of fabrication/installation.
* Design and draughting for a McKee Gas Preheater piping system.
* Planning, design/draught, fabrication and construction supervision for plant modifications / repairs during shutdowns in 1988, 1989, and 1990.
Distillation II Expansion - 1990
Lead Project Engineer for installation of a 60 Tonne/hour packaged steam boiler.
* Used network analysis extensively to ensure completion on schedule.
* Work involved coordination of multi-discipline engineers and Draughtsmen (staff and consulting), conducting a HAZOP study, client liaison (Dist. II Project Management).

1987 – 1987
Global Engineering (NZ) Ltd, New Plymouth
Contract Draughtsman
Employed on a contract basis as a design draughtsman.

1984 – 1986
Global Engineering (NZ) Ltd, New Plymouth
Cadet Draughtsman
Employed as a cadet draughtsman and trained in all aspects of process and mechanical/piping design draughting in the petrochemical industry.
Projects undertaken include:
Bechtel Pacific Corporation Ltd, Motonui
Gas to Gasoline Project, 1984 - 1985
* Worked on general pre-commissioning and commissioning modifications.
Petroleum Corporation of New Zealand, New Plymouth
Stage III Development of Oilfield Production Station, 1985
Shell BP and Todd Oil Services Ltd, New Plymouth
Wellsite KA-13 Development, 1985
Liquigas Ltd, New Plymouth
LPG Bulk Storage Facilities, 1985 - 1986
* Preparation of Piping and Instrumentation Diagrams.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 651 to 700 of 10917)

Go to Search Parameters...

Brief Description

ENGINEERING, CONSTRUCTION, MAINTENANCE, TROUBLESHOOTING, FIELD SERVICE, SUPERVISION

Petroleum engineering professional with diversified domestic USA and international experience in E&P

Senior Instrument , Electrical, Rotation, Engineer, Project Management

Internationally experienced executive, multilingual, results oriented teambuilder

Highly experienced in dealing with Engineering, Project and Procurement coordination for Static equipments and Packages. Experienced in EPC,PMC,FEED and Study type of jobs and well versed with renowned Codes and Owner Company Standards. For further details, please refer my CV attached.

An experienced Manager with muti-skill in Quality Assurance, Quality Control, NDT, Offshore experience, Oil and Gas sector, Rig building projects, internal/external/regulatory audits, Interpretation of International codes and standards .

Experince at:: small and mid-sized projects involving integrity/rehabilitation/repair/construction of pipelines and piping systems – Oil & gas, Pigging operations, Pipeline design

Having more than 15 years of experience in the field of Installation,alignment and inspection of Rotating and static equipments in the field of Oil and Gas,Power ,Petrochemical projects.Can lead a team of engineers,foremans and work force involved in Installation,alignment and inspection of equipmen

19+ years of experience in Electrical Designer Field. Experience in Oil & Gas 3 Years and Power Plant Field More than 16 Years

PROFESSIONAL SKILLS : Sales Management; Sales Force Automation; Team Player and Leader; Project Management; Schedule Maintenance; Auto Cad; Caesar II ; Technical Writing; B31.3; Process Improvement; Strategic Planning; Microsoft Office

I am a petro;eum engineer, holding BsC in petroleum engineering in 1990 worked in drilling as drilling and workover company man and coordinator with Waha Oil Co. for more than 16 years., My experience in vertical and horizontal drilling, UBD, exploration and development , well completion,

16 years of experience as a water treatment chemist in Power Plant.

17+ years, FEED, Engineering, Fabrication, Construction, Commissioning. Brownfield dev./Cap. Ex. Oil/Gas/Petrochemical/LNG/Mining

Drilling Fluids Engineer 38 years worldwide experience both in Field and Management

Extensive Cost Control experience gained over the last 25 years in the Oil Industry mainly in Drilling

Master Mariner

i attended petroleum institute nigeria after my school certificate i had ond in petroleum refining technology and higher diploma in chemical technology i worked in nnpc refineries in porthacourt warri and kaduna i can also work in petrocheical and gas processing plants

Civil Structural designer with over 20 years of experience in civil, structural, industrial, petrochemical onshore and offshore projects, infrastructure, and government projects.

Experience in foxboro and bailey DCS panel operation . i am working as panel operator in a big oilfield control room since 1993, i am the most suitable candidate for this post

Civil structural engineer, 14 years experience, familiarity with structural codes and finite elments software.

Well Services, Well Interventions, Completions

PhD in Geophysics, excellant in computer ,

Detail engineering as Performer/Area Lead; Material estimation, Proposal & Man hour estimation; Bid review, Vendor/Sub-contractor document review; Development of standards, spread sheets; Coordination with work share office/Client; Field engineering Support at site

A seasoned Security Manager with 20+ years of experience in Government service and Oil and Gas industry 15 of which was in Shell Nigeria. Strong field experience in Security Operations, kidnap & ransome mgt, risk surveys and assessment, cost control, loss prevention and incident investigation.

Goal-oriented QHSE manager with 18 years experience in organizational and project QHSE Management, In-house project Management and Audit Management including 10 years background of Piping and Pipeline Engineering in various industries under E, EP, EPCM or EPCC contracts.

Strong leadership and ability to work according by Company's Political and Procedures. Good understanding of Oil accounting Process. Supporting the branch Finance Manager on day-to-day compliance issues

I am a Chemistry graduate with 18 years of experience with NACE certificate as Corrosion Technologist

Over seventeen years of experience in the Oil & Gas Construction

18 years Project Construction Management/ Project Execution / Project Management Consultancy experience in the Industries like Refineries, Petrochemical and Oil Gas (Cross Country Pipelines, Booster Pump Stations, Gas, Oil Station, Up-Stream flow Lines) including Mechanical / Piping, Civil, Electric

Senior Piping Engineer - Stress Analysis / Material / Layout (18 years experience)

General Management (1300 staff), Sales devt, finance - International experience - Oil & gas, Distribution, civil eng.

Status Qualifications and employment history Education Foreign Languages

Working in Oman as a Instrument Engineer, I have 20 years exp in Instrumentaion and Analytical

Master mariner class 1 unltd, over 8 years command experince onboard large crude carriers. Over 40 spm mooring ops at various terminals including Lybia. Willing to gain expertise as mooring master in offshore oil industry.

I have high experience as production supervision at manufacture plants.

Drilling Fluids Engineer, Experience with All types. Over 30 years in field. World wide experience, Presently working Ultra-Deepwater projects in GOM.

post Engineer Senior Inspector – Painting / Coating & Insulation BGas / NACE –CSI [I] certified Painting Inspector. Experienced Thermal / Cryogenic Insulation Inspector Ref – Contract / Direct Hire- on Day rate basis with rotational cycle. Oil & Gas, LNG projects. Client side representati

SENIOR PANEL OPERATOR POSITION FOR PRODUCT TANK / JETTY AREA.

Sr. Electrical Designer with 15 yrs experiance including PDMS

15 year experience in international/ multicultural mid- and large scale oil & gas projects in polar areas of Russian Federation in both Contractor’s and Client’s role. Working to Russian and Western standards. Planning, risk management, cost control, certification for construction and commissioning.

My strengths lie im my ability to manage available resources and communicate with others

Expert in PDS Fameworks, Microstation, PDMS and bentley Structural Triforma

Civil/Structural engineer with 14 years experience in oil 7 gas industry

Well Test Engineer

Senior PDMS Piping Designer/Checker

With my dedicated experience as a Directional Drilling Supervisor for 14 years.I have worked in Western Canada, Mexico and Middle East.

Years of progressive and increasingly responsible executive assistant & office management

Electrical engineer with experience in oil and gas maintenance, installation, procurement, materials sales and marketing

Experience in 8 years in Mechanical seal industry, 7 years in Diesel engines and 1 year in fabrication industry

First 1 2 3 4 5 6 7 8 9 10 11 12 13 [ 14 ] 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out