Resume - ROV Pilot/Technician with two years experience on workclass ROV

Misco Jobs

Resume #83324

CONTACT INFORMATION:
View contact information...

Professional Experience

I. ROV PILOT/TECHNICIAN Jr.
(From November 10, 2007 up to May 12, 2009)

Sealanes Marine Services, Inc. / Allseas Engineering bv
- 1179 Pryce Center 8th Floor
Chino Roces Ave. corner Bagtikan St.
Makati City, Philippines
- 2612 PA Delft
The Netherlands

Duties & Responsibilities:
* Pilot Trainee, including launch/recovery of ROV systems
* Test all ROV mounted tooling packs, manipulators, camera's and interface survey sensors and ROV auxiliary systems
* Assists in repair and maintenance of all equipment;
* Adhere maintenance (preventive-maintenance) schedule for all equipment and communicate with ROV Supervisor
* Adhere Company's Quality Health Safety and Environment procedures.

Offshore Trips:

* Date: 04-Nov-2008 to 12-Dec-2008
Location: Mediterranean Sea
Project/Client: North Bardawil Development Project/Gupco
System Used: Schilling Robotics UHD

* Date: 06-Mar-2008 to 11-Apr-2008
Location: Gulf Of Mexico, Trinidad and Tobago
Project/Client: NCMA Phase 3C/BG Trinidad and Tobago
System Used: Schilling Robotics UHD

* Date: 19-Nov-2007 to 12-Dec-2007
Location: Gulf Of Mexico
Project/Client: Installation, Mobilisation, and Testing
System Used: Schilling Robotics UHD

Related Trainings:
* UHD ROV Pilot Technician (UHD System)
Schilling Robotics (Davis, California, USA)
July - August 2007
* Titan 4 Manipulator
Schilling Robotics (Houston, Texas, USA)
July - August 2007
* ROV Pilot Technician Course Grade 2
Maritime Academy of Asia and the Pacific/Skilltrade (Mariveles, Bataan,
Philippines)
May 15 to June 02, 2007
* Basic Offshore Safety Induction and Emergency Training
International Development and Environmental Shipping School (Subic Bay,
Philippines)
May 2007

Additional Info:

* Philippine passport holder with valid US VISA (B1/OCS valid until July 2012)
and UK VISA (Spouse VISA valid until march 2010)
* With valid Seafarer Medical Certificate (valid until April 2011)

II. Electromechanical Assembler
(From June 4, 2008 up to October 15, 2008)

EXPO Technologies Ltd.
- Summer Road
Thames Ditton
Surrey
KT7 0RH England
Tel: +44 (0) 20 8398 8011

Duties & Responsibilities:
* Responsible for product assembly, fabrication, equipment operation of products used in the protection of electrical equipment operating in hazardous and non-hazardous areas with safety requirements as documented in the company's quality system.
* Responsible for handling products, equipment and materials per the Production
Department and company's quality system procedures.

III. Engineer I (Communications Engineer)
(From May 23, 2005 up to March 12, 2007)

MMDA/ TEC
(Metropolitan Manila Development Authority / Traffic Engineering Center)

- Ramon Magsaysay Blvd. cor. Valencia St.
Sta. Mesa, Manila, Philippines
Tel. No. (+632) 7140702

Duties & Responsibilities:

* Troubleshoots 1st hand level Network / SCATS (Sydney Coordinated Adaptive Traffic
System) problems.
* Analyzes System malfunctions caused by Data Communication Equipment or Data
Terminal Equipment failure. (e.g. failure of Regional Computer, VAX Server, modems, multiplexers, and local controllers.)
* Creates report of Network problems encountered on time of duty.
* Through SCATS (Sydney Coordinated Adaptive Traffic System) workstation,

- Conducts routine monitoring of traffic alarms and conditions indicated by the system.
- Creates report regarding faulty detectors & lamps indicated by the system.
- Adjusts timing parameters, & split plans depending on the traffic condition as observed or as requested by traffic officer on site.

IV. VSAT Transmission Engineer (Shift Engineer)
(From June 19, 2001 up to May 19, 2004)

TELESAT, INC. (a subsidiary of Philippine Long Distance Telephone Company)
- 2nd floor VSAT Building
PLDT Exchange, Dansalan St.
Mandaluyong City, Philippines

Duties and Responsibilities:

* Perform daily & periodic Hub Maintenance Procedures.
„X Conducts routine monitoring of different kinds of satellite modems &
multiplexers used in MCPC( Multi-Channel Per Carrier) System, TDMA( Time
Division Multiple Access ) System, and in SMART GSM Circuits. (e.g. Radyne
Comstream, DMD 15; Comtech CIM-550; STM SVDM-128)
* Conduct daily network confirmation with all clients.
* Monitor signals of all carriers & maintain Eb/No Level.
* Trouble isolation and Bit Error Rate Testing using HP or TTC BER Tester.
* Troubleshoot 1st level Hub/VSAT system problems & entertains technical inquiries of clients.
„X Coordinate with Client's Network and remote personnel for trouble isolation and system restoration.
* Assemble & connect Hub components.
* Install & configure Hub & VSAT equipment.
* Assemble, install and peak antenna for optimum performance using spectrum analyzer.
„X Generates reports regarding Troubles, Alarms, & Events encountered on time of duty.
* Follow-up response to failed stations to concerned department.
* Read turnover of preceding duty and make turn - over for the next duty.

Educational Background

College B.S. Electronics & Communications Engineering
Adamson University
Ermita, Manila
1994 ¡V 2000
High School Our Lady of Lourdes Academy
Tagkawayan, Quezon
1990 ¡V 1994

Elementary Sta. Cecilia Elementary School
Tagkawayan, Quezon
1984 - 1990

Examination Passed

ECE Board Licensure Examination
Date Taken: April 2 & 3, 2001

On ¡V the - Job Training

Telecommunications Training Institute
Valenzuela, Metro Manila
Oct. 16, 2000 to Dec. 01, 2000

Trainings Attended:
* Optic Fiber Splicing & Testing
* Data Communication & Networking
* Telephone Subscriber Premise Services

Other Related Skills

Knowledge in Main Distribution Frame (MDF)
* Frame Assigning
* Troubleshooting
Knowledge in Optical Fiber Technology
* Splicing
* Testing by an OTDR
Knowledge in Subscriber Services
* Installation & Troubleshooting
Knowledge in Basic Electronics
* Can read & understand schematic diagrams
* Basic troubleshooting
Knowledge in Microprocessor Programming
* Z-80 microprocessor programming
Computer Literate
* MS Office (Word, Excel, & Powerpoint)
* Microsoft Visio

Seminars Attended

Career Orientation & Development Adamson U. Aug. 14, 1999
Career Planning for Engineers Ericsson-Phil. Jul. 24, 1999
Telecom Trends & Technologies Ericsson-Phil. Jul. 24, 1999
Internet Telephony Ericsson-Phil. Jul. 17, 1999
Asynchronous Transfer Mode Ericsson-Phil. Jul. 17, 1999
ISDN Ericsson-Phil. Jul. 17, 1999
OTDR Adamson U. Jul. 10, 1999
Programmable Logic Technology Adamson U. Jul. 03, 1999
Broadcasting Adamson U. Jun. 26, 1999

Reference
Will be provided

Personal Background
Date of Birth: July 29, 1977
Age: 30
Sex: Male
Nationality: Filipino
Religion: Roman Catholic
Civil Status: Single
Height: 5'8"
Weight: 200 lbs.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5101 to 5150 of 10816)

Go to Search Parameters...

Brief Description

My Name is Asif Naeem &My Edgucation in Diploma of Mechanical Engeering&My exprience in Mechanical Techniction&Fabrication

landman

I offer extensive experience in construction and heavy industry in a wide range of roles and positions with a detailed theoretical and practical working knowledge of the following that I have developed over the previous 22 years of my career as both an OHS&E Professional and a team leader.

I am Electronics & Communication grad from India with more than 3 years of experience in Electrical & Instrumentation.I have through knowledge of SAP PM module.

Experienced Landman seeking a challenging work environment

BACKGROUND SUMMARY Over 10 years of experience in Piping, Structural, Mechanical, and Civil with experience in 3D modeling, CADWORX and drafting and designing refinery foundations.

Three years experience as an engineering tech, 10 years experience with data manipulation.

Inspection and laying of PE gas line in Mumbai for Mahanagar Gas Ltd (MGL) and Inspection of painting and coating of steel structures in offshore.

I am a geology masters student at Baylor University (May 2009 graduation). My training has included all of the basic geological branches with focus on sequence stratigraphy, depositional systems (both carbonate and clastic), and isotope geochemistry.

Snubbing / Workover Supervisor, Field Technician.

Senior Design Engineer - Electrical

I am 38 years old, good health and have 12 years solid experience on project management for several types of large, complex and fast track International projects.

Working Offshore as an engineer and mechanic for 15 years

PDS Piping designer Engineer

PLANNING ENGINEER: Liaison with Client, Consultant, Sub-contractors and Internal departments to get complete information on assignments for further instructions to Project Engineers. Conduct daily planning/production meetings with Site Manager/Project Engineers for discussing critical activities

Process Engineer in Refinery, Oil&Gas and Petrochemical Industries

Construction Mgr.- Piping Eng.

Senior Electrical Control Eng. / PLC Programmer / Scada System Specialist

Relay Protection coordination (by Captor software); motor starting, load flow, fault studies by ETAP software; DBs and MCCs selection; AFD selection and implementation; Frame6 power generation commisioning and maintenance; Switchgears up 110 kV commisioning and maintenance.

v A First class (60%) Bachelor of Chemical (B.E.) engineering graduate from Poona university in 1992, having a total (Cryogenic Air Separation/LNG Terminal & Regasification Unit /Refinery/Petrochemicals) industrial work experience of ~ 12 years.

aws cawi

PDS administration, Complete project setup and support on multiple large scale projects using PDS 7.2, 7.1,7.0 and 6.4 Microstation J/SE, PDS Piping specifications and RDB Support, Isogen setup and support, INTools support, SmartPlant Review Administration, and other 2D and 3D CAD tools.

Engineering / Construction Mgmt – Over 25 years combined experience supporting large domestic & international project assignments in both Home Office & Field locations. Business lines include Mining & Metals, Nuclear Power, Nuclear Waste Handling, & Refinery / Chemical (Oil / Gas, & Hydrogen) Plants

Industrial Journeyman Electrician-28 years

I have 18 years experience in the Oil Service Industry, involved in all aspects of Coiled Tubing, Nitrogen Services, Fluid Pumping, N2/He Leaktesting(HLD), Pipeline Pigging/Testing & Well Testing. My last permanent position was Service Supervisor II for Halliburton Coiled Tubing in Australia. Since

Experienced Senior Civil/Structural Designer with mostly Petro-Chem background

Present Bachelor of Petroleum and Natural Gas Engineering (Designing counstruction and exploitation of oil and gas pipelines,piping and storage facilities faculty )

Rotating Equipment Engineer

Chemical engineering degree in oil&gas field, experiance at project engineer and vice-project manager, control project, cost stimate, coordinate engineering desceplin, etc.

Senior technician instrument

I would like to announce my availability to any professional company in need of a Senior HSE Officer with an Engineering and Medical Degree. My vast experience and capabilities and the ability to get along with people will prove to be an asset to the company, client and workers. As a professional,

Linux, Ansoft designer, Auto CAD, C++ and Microsoft Office

MECHANICAL ENGINEER & QUALIFIED ASNT LEVEL II IN UT.RT,PT & MPT....

Welding inspector

Lease Acquisition

Dear Sir, I believe that I have the capabilities and the experience that enable me to match the requirements of this job. I have had a considerable experience in many companies and many domains.

Seeking challenging assignments as PDS Structural Designer and Senior Draughtsman with a reputed organisation in the Construction Industry.Based on my skills in Civil/Structural Designer Using Application PDS, SPR, AutoCAD, Microstation, I am confident that I would be a great addition to your team.

Apply for post of Electronics and Instrumentation engineering

i am graduate from electrical engineering and i,m good at computer . i have ability to work any time and any place

18 Years of experience in Electronics & Instrumentation field at supervisory level in Construction & Maintenance, including 3 ½ Years of Gulf Experience. Known for superior integrity, accommodative nature, sincere & honest team member.

In June 2003, I completed Diploma in Mechanical Engineering from M.S.University, and recently I passed NDT LEVEL II Examination from FLAWTECH INSPECTION SERVICES. And I have 3 years work experience in mechanical field.

strong drilling, geological, petrophysical, coring/core analysis, OH/CH log interpretation & reservoir studies background,worked with Halliburton,Reslab,QP & Schlumberger,Involve in Operations/Well Site/Petroleum Development,reservoir characterization,Image analysis, FMI/OBMI/MSD,Mentor &training

ROV Pilot/Technician with two years experience on workclass ROV

SKILLS: Pipefitting and related works.

drafting 3D and 2D modeling and design of some plans from field work, mechanical, structural in different applications such as Cadworxs P&ID 2009, Cadworx Plant 2009, Autocad 2008

Completions Engineer, Mechanical Engineer, Technical Sales Representative

Piping designer

Skilled in Electrical and Instrumentation Systems, associated with sensors, machines, electrical generating units and switchgear systems and programing and applications of PLC, DCS

Experienced Oil and Gas HSE professional

I am an Italian naval architect. I graduated from The University of Genoa specializing in Marine engineering and naval architecture

First Prev 101 102 [ 103 ] 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out