Resume - Worked in Irak, and Afghanistan , still have valid Work Permit and visa for Afgh...

Misco Jobs

Resume #83383

CONTACT INFORMATION:
View contact information...

KEY QUALIFICATIONS:

a qualified electrician and Diesel Engineer, with many completed courses and a Diploma has many years experience in power supply units, Diesel Engines, wiring of
Domestic housing and industrial buildings, repairs and services (to only mention a few).

He was a Power Generation Specialist at AEAI, ADVANCED ENGINERING ASSOSIATES INTERNATIONAL (Afghanistan) where he specialised in: repairs of generators, planning and scheduling of maintenance sets, daily prof. services and repairs, assisted in the costing of budgets ordering of spares, and maintenance and rebuilding of engines, Cummins, mainly.
Contract ended April 2009. (End of TO 5)

Job Description is as follows:
Assist the Power Plant Manager by providing input to identify key success factors
For the Power Generation crew, as well as the training of the Local Nationals,.
Provide leadership to cause the creation of organizational structure and processes required.
To fully execute the requirements of services and is responsible for the execution of Power Generation services, quality performance and maintenance costs.
Evaluate Power Generation service execution for compliance to contract, design data, schedule, and cost budgets.
Maintain the short range look ahead plans.

has experience as:
Service Advisor,
Electrician: repairs, fault finding of existing wiring on
Residential homes and buildings, installations, wiring of DBs etc.
Artisan- Electrician and Machine fitter: Repair and services to Hydro vane ï¿½ï¿½"screw and Piston Type Air Compressors
Branch Manager: Workshop Foreman, Foreman of a workshop for the
Manufacturing of Stainless-Steel products, installing of S/Steel Balustrades and daily planning of projects in Mpumalanga and Maputo Euro Steel are the Stockists and Distributors of S/Steel Materials and fittings. Receiving and Dispatch of ordered Material. Weekly and monthly stock takes and recons.

started his career at SANDF as apprentice at the School of Signals in Heidelberg where he attended many courses ï¿½ï¿½" passed theory on Diesel simulators and practical on diesel and petrol driven generator sets. During the training period of 10 years, Andre was appointed as workshop foreman of the repair and maintenance department. Andre was transferred to Namibia where power plants had to be managed.

was in charge of all Power Units (gen sets) throughout Mpumalanga at all military bases.

EDUCATIONAL QUALIFICATIONS:

DIPLOMAS / CERTIFICATES: T1 Electrical
Mathematics
Electrical / Mechanical
Engineering Science
Applied Technology

OTHER COURSES: Pretoria College for Advanced Technical Education
(Electrical, Diesel Engines; Batteries Lead acid; Power Reticulation; Electrical Panel Wiring; Panel Faultfinding; Motors and Switchgear)

Generator Power sets Mobile and stationary
(Industrial Physiology; Production control; Workshop organization and control; Auto Electrical)

NAT. SAFETY COURSES( NOSA): Preliminary Safety Training
Advanced Safety cert. No NT/A06/82/0040

AWARDS RECEIVED: Southern Africa Medal awarded for Outstanding
Service # 24933
Cross border Operations. # 001914
Operation Moduler # TP215 # 180
Operation Hooper
Operation Packer #251
Operation Displace.
C of the Army recommendation Medal for outstanding services rendered #4838

ADDITIONAL COURSES: Logistics and Warehousing 95,5%

EMPLOYMENT HISTORY

May 2008 ï¿½ï¿½" April 2009, AEAI ADVANCED ENGINERING ASSOSIATES INTL.
Power Generation Specialist, Maintenance and Repair of Generator sets, Kandahar Power Station, AFGHANISTAN Planning and scheduling of services, and engine overhauls, on Cummins sets. Managed the project of a new 10 MW Power Station being built on site (Cummins QSK 60), wrt all planning, and operational requirements, up to commissioning in JAN 09.

March 2007 - April 2008, KELLOG BROWN ROOT, Power Generation Technician, IRAQ. Maintenance and Repair of Generator Sets, stationary Daily planning and scheduling of services And repairs, ordering of spares Repair and Maintenance of PERKINS CUMMINS, CATERPILLAR AND FG WILSON Engines and Alternators, Trouble-shooting generating ï¿½ï¿½" sets, 85 KVA ï¿½ï¿½" 2015 KVA sets.

2005 ï¿½ï¿½" 2006, STEEL IMAGE / EURO STEEL, Branch Manager/Foreman, South Africa. Foreman of a workshop for the manufacturing of Stainless-Steel products. Installing of S/Steel Balustrades and daily planning of projects in Mpumalanga and Maputo. Receiving and Dispatch of ordered Material. Weekly and monthly stocktakes and recons.

2000 -2004. SWIFT ELECTRICAL, Foreman of Works, Electrical Division South Africa
Foreman of a Workshop for the Wiring of Residential and Commercial Buildings. Wiring, circuit testing, installations, Distribution boards and reticulation of the above.Maintenance and repair contracts on Stand by generators as per contracts.

1978 ï¿½ï¿½" 2000, SANDF, South Africa

1996 ï¿½ï¿½" 2000 - Workshop foreman in charge of all Power Units (gen sets) for all military bases in Mpumalanga. Transferred to the signal unit In Nelspruit. (1996 - 2000 ) and appointed as Workshop foreman in charge of all Power Units (gen sets) throughout Mpumalanga at all military Bases All repairs and services to this equipment throughout the region was done by Van Zyl and his team of specialists.

1990 ï¿½ï¿½" 1995 - Workshop-Foreman in charge of all Telecommunications, and Power plants, Namibia Military bases. During January 1990 Mr. Van Zyl was transferred to 6 Signal unit in Namibia, where he was appointed as Workshop-Foreman, in charge of all Telecommunications, and Power plants deployed throughout Namibia at Military and operational bases. All these power plants had to be maintained (electrical and mechanical supervision). No subcontractors were appointed to do this task. Mr. Van Zyl was the workshop Foreman for 5 years.

1978 ï¿½ï¿½" 1990 - Trainer and Technical Advisor (Generation sets, etc). Started as apprentice (1975 ï¿½ï¿½" 1978) and qualified as Electrician (Signals) in 1978. During 1978 - 1988 trained apprentices in the following subjects: Generator Sets, Diesel Engines and Power supply units. Trained Apprentices at the SANDF School of Signals (Heidelberg) for 10 years in the following disciplines: Workshop Foreman; Financial Manager; National Health and Safety Representative; Qualified as Millwright 22 years on Power Supply; Units, Mobile and Stationery. Gen- Sets 1.5kva/1500; Diesel Engines Qualified, Diesel Fitter; Wiring and Power reticulation, single and demob. ; Panel Wiring, Electric- Motors and Switch-gear; Auto- Electrical, Battery Charging and rebuilding; Installation of Solar Panels, Veld-Lighting, Distribution and reticulation of operational bases; Operational Employment outside the Countries Borders; Gen ï¿½ï¿½"sets, Maintenance and repairs.

Was extensively involved in operational and urban capacity as Technical Advisor. Work he did as Signals Electrician entailed that all Power plants as a whole was his responsibility, serviceability wise, meaning that the electrical as well as the diesel/petrol engines had to be maintained by one specialist. During this period of training he was also appointed as the Work-Shop Foreman of the repair and maintenance department.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1101 to 1150 of 10917)

Go to Search Parameters...

Brief Description

Over 20 years experience in the petrochemical and industrial gas maintenance, capital projects and construction field. Specializing in the repair and alignment of mechanical rotating equipment, pumps, compressors, turbines, valves, process piping and tubing. Management, scheduling and planning of w

Senior Piping Designer

25+ years experience in piping design of power plant,refinery, and chemical plant exoeriences. Field experience included.

I am presently the Subsea Toolpool manager for a major Oil operator's Subsea Wells dept operating in Angola.This work is combined with an ROV interface engineering workscope.

Diesel mechanic and maintenance on all generators, trucks, cats and vehicles. I also know welding and boat engines( inbord and outbord).

QA/QC NDT and RT Interpreter Coordinator 5 Years QA/QC Welding and Fabricating Inspector Lev 2 8 Years Welding Instructor /Team Leader 3 Years Supervisor/ Superintendent / Piping-Mechanical-Structural 7 years

Electrical Design, Drafting, Construction and Procurement

Autocad, microstation, frameworks 2-d and 3-d cad structural designer

Quantity Surveyor - Estimator for Oil and Gas, Petrochemical, Hydro Power Plant, Fabrication Shop, 24 yrs. exp.

Experience 2D, 3D, and 4D land seismic surveys. Vibroseis, dynamite and airguns. Terrain derest, bush, swamp, transition, heliportable and urban

Anhydrous Ammonia production for 30 years

Over 22 years in Plant Operation in round the clock shift duties.

Oil Industry 37 years, Regulatory, Environmental, Safety 28 years,

Worked in Irak, and Afghanistan , still have valid Work Permit and visa for Afghanistan, Gen technician

Sr.PDS/PDMS Piping Design Engineer/Designer / PDS Administrator /Lead piping Engineer/Designer.

A Mechanical Engineer with 20 + years of experience in O&M of large Diesel engines and various machineries in power plant and marine industry

Senior Executive with more than twenty years of experience, many of them abroad.

Project / Engineering of facilities for the domestic and international oil and gas industry with emphasis on Structural and Foundation Engineering. Strong knowledge of processing, and construction of platforms, pipelines, platform drilling /workover rigs, etc.

Offshore Oil & Gas Paramedic

Fifteen years of experience in Refinery, Oil & Gas and Petrochemicals field as a Piping designer in producing plot plans, Equipment Layout, Piping General Arrangement Dwgs, Piping isometrics, Jacketed piping isometrics, M.T.O., Stress isometrics, Sketches, Nozzle orientation and as-built Drawing on

Servicing oil and gas wells; running/pulling tools ,well clean outs using nitrogen

chemical engineer in pakistan steel mills

I am an IRCA (UK) Registered QMS 2000 Lead Auditor, currently working QA/QC Manager with an EPC Company for Yemen LNG Project, Balhaf site, Yemen.

Operation Management for FPSO / FSO

Petroleum Engineer with extensive experience in Drilling, Operations, Drilling Management. Trained in: Offshore, Onshore, Inland-waters. HTHP wells, Gas wells, Horizontal drilling.

Engineering professional with 17+ years of experience within diverse oil, gas field, refinery and petrochemical industrial arenas. Expert level engineer for instrumentation and control disciplines.

Reliability / Maintenance / Rotating Equipment Engineer with 20+ years of experience in Oil / Gas / Petrochemical / Utility industries.

Experience with handling database and managing data. Very familiar with writing database queries in SQL, as well as developing database scriptings. Industry expert in data quality.

Over 13 years of solid experience in piping stress/pds design for Refineries,petrochemicals,fpso&power projects.

To present my background and what I can do in the company with my skills.

Saudi Aramco Approved Vendor Inspector SAP No. 70004827, Certified API-510, Cswip 3.1, NDT Level2, ISO 9001.

13 years oil industry experience,• Drill wells up to 6500 mt, High temperature gas wells, drilling of horizontal multi-lateral hole, sidetracks, H2S Environment,Run 5 1/2" expandable liner & Run 4 1/2" completion assy., with 4 1/2" liner cemented off bottom

Sales Professional

Analytical, communication, result oriented, and learning for development

Experienced Operational personell in the field of oil and gas / petrochemical with commissioning experience

Geophysicist with over 12 years experience in various aspects of geophysical works. Proven solid experience in: 2D/3D seismic interpretation, Velocity Modeling, Acoustic/Elastic Inversion, AVO/AFI analysis,Seismic Inversion

Designation project supervisor in higher risk environment

Mechanical engineer graduated in 1991 from Damascus university (machinery department)since that date (15 years experience in oil and gas industry in onshore and offshore)I have been in several companies(SPC,SCOT,Alfurat petroleum co with SHELL in their gas plant.

20 years experience in process and laboratory analyzers in refinery and Petrochemicals operations world wide. Graduate degree in analytical chemistry. Willing to relocate.

Sr. Civil Structural Designer

Working as Well Site Geologist for Oil Field Instrumentation, India. Our client is MEDCO international an Indonesian company. Presently I am working in Oman. I have worked in the following fields of Oman: Simsim, Warad, Basma and Irad.

PANEL AND FIELD OPERATION

CAREER SUMMARY : Vast experience in the field of industrial piping, i.e. petrochemicals, fertilizer, synthetic fiber, refinery, polyester and pharmaceuticals industries. Main responsibilities includes - model review, piping designing, supports, drawings checking, site survey and coordination.

I have worked in the Oil & Gas industry for over 20 years

HSE Manager with international experience. Nebosh certificate.

My career objectives, strengths and experience in the workforce I am a skilled, experienced and respected heavy equipment mechanic with substantial experience onshore & offshore Australia and overseas particularly here in Asia.

Experience in Supply and Demand Planning, Customer Service, Logistics and Purchasing

Drilling Supervisor / Drilling Foreman / Comapany Man/ Drilling Engineer

Working in the North Sea in UK, Norwegian and Dutch sectors. Projects for Seafox 4,Sean P, Clipper, Britania,Transocean Leader, Transocean Winner, Deepsea Delta, Njord A, Troll A B C, Ocean Vanguard

Client Representative QC navaigation,

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 [ 23 ] 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out